The potential of high digestible grain sorghum (HDGS) with a modified starch protein endosperm matrix to replace corn in ethanol production was investigated using dry grind simultaneous saccharification and fermentation (SSF). Preliminary experiments showed that HDGS yielded higher amounts of glucose and ethanol than normal digestible grain sorghum (NDGS) and corn particularly in the first 48 hrs of fermentation. It was hypothesized that fast conversion of starch to glucose and ethanol during hydrolysis and fermentation are results of improved protein digestibility of HDGS. The invagination of protein structures in HDGS produced a flourier endosperm texture, softer kernels and lower starch content than the normal digestible protein (ND) lines. Highly digestible protein (HD) lines have better pasting properties (significantly lower pasting temperature, faster rate of gelatinization and higher peak viscosity) than ND lines based on the RVA profile. Increasing protein digestibility of the HDGS improved starch digestibility (increased rate of glucose conversion and total glucose yield during saccharification), which is supported by highly significant correlation of turbidity with rate of glucose conversion and efficiency of enzymatic conversion. The efficiency of ethanol conversion is significantly correlated with starch digestibility, pasting properties, and protein digestibility. Results also showed that HD sorghum lines had significantly faster rate of conversion and shorter reaction time needed to achieve completion than ND sorghum lines and corn. Increasing the dry solid concentration from 22% to 30% (w/v) increased the ethanol yield from 8% v/v to 13%v/v. This will allow considerable saving of water, reduced distillation cost and increased ethanol production for a given plant capacity and labor cost. Fineness of grind influences the amount of sugar formed due to variation in surface area of the flour. The hypothesis that finer particles has faster and higher glucose yield, defined as g of glucose converted per g of theoretical glucose, is supported by highly significant correlation of mass fraction of 3 to 60 mu m size range and mass median diameter (MMD) of 60 to 1000 mu m size range with glucose conversion efficiency and glucose conversion rate during saccharification and fermentation.

A flux declination predication model for nanoparticle-containing wastewaters treated by a simultaneous electrocoagulation/electro- filtration (EC/EF) process was investigated by perceiving blocked membrane pores, concentration polarization layer, cake layer, and applied electric field strength in this study. As nanotechnology develops, it has been used in many applications. However, its environmental impacts have not been extensively studied. Membrane technology is one of the direct and effective treatment methods for removing nanoparticles from wastewater. But nanoparticle-containing wastewater treated by membrane technology would face the problem of membrane fouling. In this study, oxide chemical mechanical polishing (CMP) wastewater, copper CMP wastewater, and nanosized TiO2-containing wastewater were treated by a EC/EF treatment module. In the EC/EF treatment module, iron, aluminum, and stainless steel were respectively selected as th anode and cathode. Polyvinylidene fluoride (PVDF) with a nominal pore size of 0.1 £gm and carbon/Al2O3 tubular inorganic composite membranes with a pore size ranging from 2 to 10 nm were used in this work. In this work, the changes of the relevant performance of membrane with changes of applied pressure (9.8-19.6 kPa), crossflow velocity (0.3-0.5 m/s) and applied electric filed strength (25-233 V/cm) were studied. The simulation results of a modified mathematic model showed that the flux declination would be fitted finely by an exponential function. Experimental results showed that a higher transmembrane pressure would yield a higher cake concentration and a higher crossflow velocity would yield the steady flux quickly. Overall speaking, the flux declination for nanoparticle-containing wastewaters treated by a simulataneous EC/EF process was described properly as a exponential form. The exponential function could simply show the flux declination of different samples treated by different modules in different situations.

No description available.

none

Zugl.: Bochum, Univ., Diss., 2009

Thesis (M.A.)--Ohio State University, 1950. / Advisor: John R. Kinzer. Text made available in compliance with Section 108 of the Copyright Revision Act of 1976. Includes bibliographical references (leaves 73-77). Online version of print reproduction.

Zugl.: Cottbus, Techn. Univ., Diss., 2009

This thesis discusses techniques for improving the fault tolerance of multithreaded applications. We consider the impact on fault tolerance methods of sharing address space and resources. We develop techniques in two broad categories: conservative multithreaded fault-tolerance (C-MTFT), which recovers an entire application on the failure of a single thread, and optimistic multithreaded fault-tolerance (OMTFT), which recovers threads independently as necessary. In the latter category, we provide a novel approach to recover hung threads while improving recovery time by managing access to shared resources so that hung threads can be restarted while other threads continue execution. / text

No description available.

Peptide sequencing by surface-induced dissociation (SID) on a MALDI-Ion Mobility-orthogonal-TOF mass spectrometer is demonstrated. The early version of the instrument used for proof-of-concept experiments achieves a mobility resolution of approximately 20 and TOF mass resolution better than 200. Peptide sequences of four peptides from a tryptic digest of cytochrome c (ca. 1 pmol deposited) were obtained. The advantage of IM-SID-o-TOFMS is that a single experiment can be used to simultaneously measure the molecular weights of the tryptic peptide fragments (peptide mass mapping) and partial sequence analysis, (real time tandem mass spectrometry.) Optimization of the MALDI-IM-SID-o-TOF mass spectrometer for peptide sequencing is discussed. SID spectra obtained by using stainless steel, Au grids, and fluorinated self-assembled monolayers (F-SAM) on Au are compared. Optimum collision energies differ for the various surfaces. The fragmentation patterns observed for a series of peptides and protein digests using the Nd:YAG laser (355 nm) for MALDI ion formation and an FSAM surface for ion activation is compared to the fragmentation patterns observed for CID and photodissociation. The fragmentation patterns observed in all cases are strikingly similar. Photodissociation produced a greater abundance of ions resulting from side-chain cleavages. As a general rule optimized SID spectra contain fewer immonium ions than either photodissociation or CID. Evaluation of an instrument incorporating a new hybrid drift cell is discussed. Spectra for a digest of hemoglobin is compared to that acquired with an ABI 4700 TOF-TOF. The performance of the instrument is also evaluated using a micro-crystal Nd:YAG laser (355 nm) for MALDI operated at 400 Hz. Experiments were performed to determine the sensitivity and overall performance of the instrument. The reproducibility of the MS/MS spectra for gramicidin S is shown to be 94% run-to-run. The best mobility resolution obtained for a neat deposition of the dye Crystal Violet was 60 t/∆t. Sensitivity was tested with the peptide fibrinopeptide A (m/z 1537, AA sequence ADSGEGDFLAEGGGVR). Data acquired for sixty seconds with approximately sixty femtomoles deposited. Abundant [M+H]+ ions where observed as well as [M+H]+-NH3 ions. The S/N for this short run was insufficient to identify any SID fragments