No description available.

Cette thèse a pour objectif d'améliorer les performances électrochimiques des dispositifs asymétriques C/MnO2 en formulant des oxydes de manganèse présentant des nano- ou mésostructures. Deux méthodes d’élaboration sont explorées. Le matériau mésoporeux est obtenu par réaction entre un agent structurant souple CTAP et divers alcènes A. L’impact des solutions colloïdales CTAP-A sur la texture et la microstructure de MnO2 a été étudié en proposant un modèle qui corrèle la dimension des agrégats avec le diamètre des pores de MnO2. Les performances du dispositif asymétrique sont aussi optimisées. Bien que l’emploi d’un agent structurant dur AAO n’ait pas permis d’élaborer directement un matériau d’électrode MnO2 performant, une microélectrode de MnO2 élaboré sur des nano-piliers de nickel électrodéposé sur AAO montre des propriétés électrochimiques concurrentes avec celles des microélectrodes actuelles. La bonne réponse en puissance élevée du dispositif asymétrique est due à l’excellente connexion entre les piliers et le matériau actif. Ce mémoire offre une meilleure compréhension sur la formation de MnO2 et présente des microélectrodes prometteuses pour les microsupercondensateurs. / The aim of this thesis is to improve the electrochemical performance of C/MnO2 asymmetric devices by elaborating manganese oxides exhibiting nano- or mesostructures. Two preparation methods are proposed. A mesoporous material is obtained through the reaction of soft template CTAP with various A alkenes. The effect of CTAP-A colloidal solution on MnO2 texture and microstructure has been studied by establishing the relationship between aggregates dimension and pore diameter. Asymmetric devices performances can be optimized this way. Attempts to employ AAO as hard template for developing a performant MnO2 electrode were unsuccessful. Nevertheless, a MnO2 microelectrode containing the oxide on nickel nanowires electrodeposited on AAO provided excellent electrochemical performances, comparable with current microsupercapacitor electrodes. Asymmetric device energy retention with increasing power is good due to the excellent MnO2/nickel nanowires connection. This thesis offers insights on the MnO2 formation and proposes promising microelectrodes for microsupercapacitors.

With the discovery of conductivity in doped polyacetylene (PA), a new era in synthetic metals has emerged by breaking the traditionally accepted view that polymers were always insulating. Conducting polymers are essentially characterized by the presence of conjugated bonding on the polymeric back bone, which facilitates the formation of polarons and bipolarons as charge carriers. Among the numerous conducting polymers synthesized to date, polypyrrole (PPy) is by far the most extensively studied because of prodigious number of applications owing to its facile polymerizability, environmental stability, high electrical conductivity, biocompatibility, and redox state dependent physico-chemical properties. Electrochemically prepared PPy is more interesting than the chemically prepared polymer because it adheres to the electrode surface and can be directly used for applications such as supercapacitors, electrochemical sensors, electromechanical actuators and drug delivery systems. In quest for improvement in quality of the device performances in the mentioned applications, micro and nano structured polymeric materials which bring in large surface area are studied. Finding a simple and efficient method of synthesis is very important for producing devices of PPy microstructures. Till date, Hard and soft template methods are the most employed methods for synthesis of these structures. Soft template based electrochemical methods are better than hard template methods to grow clean PPy microstructures on electrode substrates as procedures for removal of hard templates after the growth of microstructures are very complex. As per the literature, there is no unique method available to grow PPy microstructures which can demonstrate several applications. Although gas bubble based soft template methods are exploited to grow conducting polymer microstructures of sizes in few hundreds of micrometers, studies on applications of the same are limited. Hence it is planned to develop procedures to grow microstructures that can be used in several applications. In the current work, PPy microstructures with high coverage densities are synthesized on various electrode substrates by soft template based electrochemical techniques. Hollow, hemispherical and spherical PPy microstructures are developed by a two step method using electro generated hydrogen bubble templates on SS 304 electrodes. In the first step, Hydrogen bubbles are electro generated and stabilized on the electrode in the presence of β- naphthalene sulfonic acid (β-NSA). In the second step, Pyrrole is oxidised over the bubble template to form PPy microstructures. Microstructures (open and closed cups) of average size 15 μm are uniformly spread on the surface with a coverage density of 2.5×105 units /cm2. Globular PPy microstructures are developed by a single step method using concomitantly electro generated oxygen bubble templates on SS 304 electrodes during electropolymerization. Microstructures of average size 4 μm are uniformly spread on the surface with a coverage density of 7×105 units/cm2. Surfactant properties of Zwitterionic 4-(2-hydroxyethyl)-1-piperazine ethane sulfonic acid (HEPES) are exploited for the first time to grow conducting polymer microstructures. Ramekin shaped PPy microstructures are developed using HEPES as the surfactant to stabilize hydrogen bubble templates in a two step electrochemical synthesis method. Microramekins of size 100 µm are uniformly spread on the surface with a coverage density of 3000 units/cm2. Micropipettes and microhorns of PPy are synthesised by a single step electrochemical route using HEPES as a surfactant. Hollow micropipettes of length 7 µm with an opening of 200 nm at the top of the structure are observed. Similarly microhorn/celia structures are observed with length 10-15 µm. Microcelia are uniformly distributed over the surface with each structure having a diameter of 2 µm at the base to 150 nm at the tip. Growth mechanism based on contact angle of the reactant solution droplets on the substrate is proposed. PPy microstructures are characterized by scanning electron microscopy, X-Ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, Raman Spectroscopy and UV-Visible spectroscopy to study morphology, ‘chemical bonding and structure’ , ‘defects and charge carriers’. Applicability of the electrodes with PPy microstructures in supercapacitors is investigated by cyclic voltammetry, chronopotentiometry and electrical impedance spectroscopy. Electrodes developed by all the above methods demonstrated very good supercapacitance properties. Supercapacitor studies revealed very high specific capacitances (580, 915, 728 and 922 F/g,) and specific powers (20, 25, 13.89 and 15.91 kW/kg) for electrodes with PPy microstructures (H2 bubble based two step method, O2 bubble based single step method, HEPES stabilized H2 bubbble method and HEPES based microhorn/celia structures respectively). Supercapacitive behavior of all the electrodes is retained even after an extended charge-discharge cycling in excess of 1500 cycles. Horseradish peroxidase entrapped, bowl shaped PPy microstructures are developed for H2O2 biosensing. Amperometric biosensor has a performance comparable to the sensors reported in the literature with high sensitivity value of 12.8 μA/(cm2.mM) in the range 1.0 mM to 10 mM. Glucose oxidase entrapped PPy amperometric biosensor is developed for Glucose sensing. Sensitivity of 1.29 mA/(cm2.mM) is observed for β-D-Glucose sensing in the 0.1 mM to 5.0 mM range while 58 μA/(cm2.mM) is observed in the 5.0 to 40 mM range. Potentiometric urea sensor with urease entrapped PPy microstructures on SS electrode is developed. It is able to sense urea in the micromolar ranges down to 0.1 μM. It represented an excellent performance with sensitivity of 27 mV/decade. Sensitivity in the micromolar range is 4.9 mV/(μM.cm2). Drug encapsulation and delivery is successfully demonstrated by two actuation means (i) by electrochemical actuation, (ii) by actuation based on pH changes. Concepts are proved by delivering a fluorescent dye into neutral and acidic solutions. Drug delivery is confirmed by UV-Visible spectroscopy and Fluorescence microscopy. Finally, Micro/nanostructures with Tangerine, Hollow globular (Pani Poori), Chip, Flake, Rose, Worm, Horn and Celia shapes are synthesized electrochemically and scanning electron microscopic studies are presented. Controlled growth of microstructures on lithographically patterned gold interdigital electrodes is demonstrated with a future goal of creating addressable microstructures. The studies reported in the thesis provide an insight on various applications of PPy microstructures (supercapacitors, sensors and drug delivery systems) developed by a unique methodology based on electrochemically generated gas bubble templates.

Ce travail combine l'électrochimie à l'interface liquide - liquide avec le procédé sol - gel pour la modification interfaciale avec de la silice mésoporeuse. Dans la première partie de ce travail, l’interface liquide – liquide macroscopique a été utilisée pour séparer la solution aqueuse de l'espèce de précurseur de silice hydrolysées (tétraéthoxysilane (TEOS)) de l'agent tensioactif cationique (cethyltrimethylammonium (CTA+) qui a agi comme un template et a été dissous dans le dichloroéthane. Le dépôt de matériau de silice a été déclenchée par le transfert du CTA+ à partir de la phase organique vers la phase aqueuse. CTA+ qui a transféré à la phase aqueuse a catalysé la réaction de condensation de la silice sur l’interface liquide – liquide. Le dépôt de silice à des interfaces liquide – liquide miniaturisées était la deuxième partie de ce travail. Les dépôts stables sur le côté de l'interface ont été synthétisés in situ par voie électrochimique. La stabilité mécanique des dépôts de silice permis un traitement thermique de la silice. Basé sur les techniques d’imagerie (par exemple SEM) il a été constaté que les dépôts forment des hémisphères pour des temps plus long. La réaction interfaciale a également été suivie in situ par spectroscopie Raman confocale. Caractéristiques moléculaires de l'interface ont été modifiées de manière spectaculaire une fois les espèces CTA+ ont été transférés à la phase aqueuse. Les interfaces liquide – liquide miniaturisés et modifiés ont également été évaluée avec le transfert voltampérométrique / This work combines the electrochemistry at the interface between two immiscible electrolyte solutions (ITIES) with the Sol – Gel process of silica leading to an interfacial modification with mesoporous silica using soft template. In the first part of this work the macroscopic liquid – liquid interface was employed to separate the aqueous solution of the hydrolyzed silica precursor species (tetraethoxysilane (TEOS)) from the cationic surfactant (cethyltrimethylammonium (CTA+)) dissolved in the dichloroethane. The silica material deposition was controlled by the electrochemical CTA+ transfer from the organic to the aqueous phase. Template transferred to the aqueous phase catalyzed the condensation reaction and self-assembly resulting in silica deposition at the interface. Silica deposition at the miniaturized ITIES (membranes supporting array of micrometer in diameter pores were used in this regard) was the second part of this work. Silica interfacial synthesis performed in situ resulted in stable deposits growing on the aqueous side of the interface. Mechanical stability of the supported silica deposits allowed further processing – silica material was cured. Based on imaginary techniques (e.g. SEM) it was found that deposits forms hemispheres for longer experimental time scales. Interfacial reaction was also followed with in situ confocal Raman spectroscopy. Molecular characteristics of the interface were changed dramatically once CTA+ species were transferred to the aqueous phase. Array of microITIES modified with silica was also assessed by ion transfer voltammetry