The present study investigated the antioxidant properties of commercial regular- and whole- wheat spaghetti. The antioxidant properties comprise the total phenolic content, DPPH radical scavenging activity, oxygen radical absorbance capacity. The contents of ferulic acid, C-glycosyl flavones and SDG were measured by using LC/MS techniques. Whole wheat spaghetti showed significantly higher TPC and ORAC. The contents of ferulic acid, C-glycosyl flavones and SDG were significantly higher in whole wheat spaghetti. The TPC was found to decrease 48 – 78% after cooking. The results showed that consumption of whole grain is strongly recommended. The present study also compared the antioxidant properties of commercial infant cereals. Purple wheat and red rice were used in making home-made and lab-made infant cereals. Pigmented infant cereals showed higher TPC, total anthocyanin content (TAC) and ORAC then brown rice and commercial ones. Anthocyanins were found only in purple wheat while a C-glycosyl flavone was found at higher levels in purple wheat than in red rice samples. Home-made samples did not show significant differences in TPC, TAC and ORAC with lab-made ones; however, the contents of anthocyanins and C-glycosyl flavones were significantly different. Home-made purple wheat infant cereals showed higher cellular antioxidant activity (CAA) than lab-made purple wheat, red rice and commercial ones. Whole purple wheat holds potential to improve the antioxidant properties of infant cereals.

Thesis (M.M.)--Bowling Green State University, 2008. / Document formatted into pages; contains x, 103 p. : ill., music. Includes bibliographical references.

Thesis (MSc)--University of Stellenbosch, 2005. / ENGLISH ABSTRACT: Pasta manufacturing is a process whereby wheat flour is converted into a shelf-stable food that is more desirable than native wheat flour. It can be fortified and may serve as a valuable source of nutrition in developing countries. Quality measures are of importance in the production process to ensure a consistent and acceptable finished product. Literature provides information on many aspects of wheat types, milling techniques and processing of pasta. Protein content and quality of cultivated wheat varieties is of major importance to produce quality pasta products. Wheat types of lower protein content are more readily available than traditionally used durum wheat. As in all food products, the cost of final products is of major importance. Bread wheat is generally less expensive than durum wheat. However, product quality (and thus acceptability) may be lower. Direct measurements of product quality are currently limited to protein content, moisture content, colour analyses and certain other characteristics measurable in a laboratory, for example mechanical strength and firmness. Direct measurements of defects that may affect final product quality, such as cracks and fissures on the strands of spaghetti, different types of spots and lines on the strands, broken units, units sticking together and odd shapes are not well documented. During the first part of this study, spaghetti quality evaluation techniques were reviewed, improved or developed and thereafter standardised. This developmental research was conducted to establish valid and reliable measures (with a high degree of repeatability) for the evaluation of dry and cooked pasta quality characteristics. A wide variety of available products on the South African market were evaluated for different quality characteristics. From this evaluation standards were drawn up, tested for validity and reliability by means of repeatability. Minimum sample sizes for the evaluation of different quality characteristics were calculated and presented in the study, together with reference photographs that can be used to evaluate spaghetti. This study found that colour evaluation by means of commercially available apparatus needs revision. This study suggests the use of multiple layers when evaluating translucent food products for colour. The occurrence of fissures and flour spots are of importance for the quality of the final product. This study provides a set of valid and reliable measurements for measuring the quality of dry and cooked spaghetti. Simple techniques can therefore be used to detect the presence or absence of these defects. Thereafter an empirical study was conducted to describe the differences between spaghetti prepared from durum and non-durum wheat, dried at different temperatures and at different relative humidity. Spaghetti samples of diverse perceived quality, from different manufacturers, were purchased and evaluated. Standard methods and the newly developed testing methods were used to test whether these methods effectively distinguish between spaghetti of diverse quality, reflecting on the validity of the methods. Correlations were calculated between dependent and independent variables in an attempt to find possible explanations for certain defects or quality differences, and to test certain theories in the literature. Certain relationships between quality characteristics were found, while others were questioned. The most important proven relationships were between protein content and its effects on reducing quality defects such as fissures, breakages and cooking losses. The relationship between ash content and spaghetti colour could not be confirmed in this study. This study confirmed that protein remains one of the most important variables to ensure consistent quality spaghetti. / AFRIKAANSE OPSOMMING: Pastavervaardiging is ‘n proses waartydens koring meel omskep word in a produk met ‘n stabiele en lang rakleeftyd wat meer gewens is as die oorspronklike koring meel. Pasta kan gefortifiseer word and kan dien as a waardevolle voedingsbron in ontwikkelende lande. Om ‘n konstante en aanvaarbaare finale produk te verseker is kwaliteitmetings gedurende die produksie proses belangrik. Die literatuur voorsien heelwat inligting rakende aspekte van belang vir pastakwaliteit, byvoorbeeld koringtipes, maaltegnieke en die vervaardigingsproses. Proteïninhoud en die kwaliteit daarvan is van groot belang tydens die produksie van hoë kwaliteit pasta. Koringtipes met ‘n laer proteïninhoud is meer geredelik beskikbaar as tradisionele durumkoring. Soos met alle voedselprodukte, is die koste van die finale produk van groot belang. Oor die algemeen verhandel broodkoring teen laer pryse as durumkoring. Die produkkwaliteit en aanvaarbaarheid van pasta vervaardig van broodkoring kan egter laer wees as dié van durumkoring. Direkte metings van produkkwalitiet is tans beperk tot proteïninhoud, voginhoud, kleuranalise en sekere eienskappe meetbaar in ‘n laboratorium, byvoorbeeld meganiese sterkte en fermheid. Die direkte meting van defekte wat finale produkkwaliteit kan beïnvloed, byvoorbeeld barste, krake, meel kolletjies, strepe op spaghetti-eenhede, gebreekte eenhede, eenhede wat aan mekaar kleef en ongewone vorms, is nie goed gedokumenteer nie. Gedurende die eerste gedeelte van hierdie studie, is ‘n oorsig van spaghetti evaluasie tegnieke beskikbaar in die literatuur gdoen, waarna sekeres verbeter is, ander ontwikkel is en finaal gestandariseer is. Hierdie navorsing is uitgevoer om geldige en betroubare metings (met ‘n hoë graad van herhaalbaarheid) vir die evaluasie van droë- en gaar pastakwalitietseienskappe vas te stel. ‘n Wye verskeidenheid van produkte beskikbaar op die Suid-Afrikaanse mark is ge-evalueer ten opsigte van verskillende kwaliteitseienskappe. Vanuit hierdie evaluasies is standaarde saamgestel en getoets vir geldigheid en betroubaarheid deur middel van herhaalbaarheid. ‘n Minimum steekproefgrootte per kwaliteitseienskap is bereken en word vermeld in hierdie studie. Daarmeesaam word verwysingsfoto’s aangebied wat gebruik kan word tydens die evaluasie van spaghetti. Hierdie studie bied a stel geldige en betroubare meting vir die kwaliteit van droe en gaan spaghetti. Eenvoudige tegnieke kan dus gebruik word om die voorkoms van hierdie defekte te meet. Met afloop van die verkennende studie, is ‘n empiriese studie gedoen om die verskille te beskryf tussen pasta vervaardig van durum en brood koring, gedroog teen verskillende temperature en relatiewe humiditeit. Spaghettimonsters met oënskynlike diverse kwaliteit, vervaardig deur verskillende maatskappye, is aangekoop en ge-evalueer. Standaardmetings en nuutontwerpte metings is gebruik om te bevestig of die metings kan onderskei tussen spaghetti met uiteenlopende kwaliteit, wat reflekteer op die geldigheid van die metingsmetodes. Korrelasies is bereken tussen afhanklike en onafhanklike veranderlikes in ‘n poging om moontlike verklarings vir sekere defekte of kwaliteitsverskille te vind, en ook om sekere teoriëe in die literatuur te toets. Die verband tussen sekere kwaliteitseienskappe is bevestig en bewys, terwyl ander bevraagteken was. Die mees belangrike verband was proteïninhoud en die effek daarvan om die voorkoms van defekte, soos barste, gebreekte eenhede en kookverliese te verlaag. Die verband tussen asinhoud en spaghettikleur kon nie in hierdie studie bevestig word nie. Hierdie studie het bevestig dat proteïn die mees belangrike veranderlike is wat oorweeg moet word wanneer ‘n konstante hoë kwaliteit spaghettiproduk vervaardig word. Kleurevaluasie met behulp van kommersieel-beskikbare apparaat vereis hersiening. Hierdie studie stel voor dat tydens kleur evaluasie van voedsel wat lig deurlaatbaar is, dit in veelvoudige lae evalueer moet word. Die voorkoms van defekte soos barste, krake of meel kolletjies is van belang ten opsigte van finale produkkwaliteit. Hierdie studie bied riglyne vir die evaluasie van die genoemde defekte. Die voorkoms van hierdie defekte is van groter belang as die graad waarteen die defek voorkom. Eenvoudige tegnieke kan vervolgens gebruik word om die teenwoordigheid of afwesigheid van hierdie defekte te bepaal.

Made available in DSpace on 2014-12-17T15:01:26Z (GMT). No. of bitstreams: 1 ChristianeMCNB_DISSERT.pdf: 1762203 bytes, checksum: 5176c3b0b76619790b3648c0ad57eaf1 (MD5) Previous issue date: 2010-12-16 / This work studies the fabrication of spaghetti through the process at high temperatures through the use of flour added to flour and flaxseed meal, with the aim of evaluating the final product quality and estimate the cost of production. The values of moisture, ash, protein, wet gluten, gluten index, falling number and grain of flour and mixtures to test to be the possible use in mass manufacturing and technological criteria for compliance with current legislation. Spaghetti noodles type were manufactured by adding 10% and 20% flour and 10% and 20% flaxseed meal with performance of physical-chemical, sensory and rheological properties of the products. Further analysis was performed on the product acceptance and estimation of production cost in order to create subsidies to enable the introduction of products with greater acceptance and economic viability in the market by the food industry. On the rheology of the product test was cooking the pasta, specifying the volume increase, cooking time and percentage of solid waste. In the sensory evaluation was carried out the triangular test of product differentiation with 50 trained judges and acceptance testing by a hedonic scale with evaluation of the aspects color, taste, smell and texture. In defining the sensory profile of the product was performed with ADQ 9 judges recruited and trained at the factory, using unstructured scale of 9 cm, assessing the attributes of flavor of wheat, flax flavor, consistency, texture of raw pasta, raw pasta color and color of cooked pasta. The greater acceptance of product quality was good and the pasta with 20% flour, 10% followed by the full product, 10% and 20% flaxseed characterized the average quality of the criterion of loss analysis of solids, together with mass full commercial testing. In assessing the estimated cost of production, the two products more technologically feasible and acceptable (20% whole and 10% flaxseed) were evaluated in high temperature processes. With total cost of R $ 4,872.5 / 1,000 kg and R $ 5,354.9 / 1,000 kg respectively, the difference was related to the addition of lower inputs and higher added value in the market, flour and flaxseed meal. The comparative analysis of cases was confirmed the reduction in production time (10h), more uniform product to the drying process at high temperature compared to conventional / O presente trabalho estuda a fabrica??o de espaguetes por meio do processo a alta temperatura, atrav?s da utiliza??o de farinha adicionada com farinha integral e farinha de linha?a, com o objetivo de avaliar a qualidade final do produto e estimar o custo de produ??o. Foram avaliados os valores de umidade, cinzas, prote?na, gl?ten ?mido, gl?ten ?ndex, granulometria e falling number, das farinhas e misturas visando comprovar sua poss?vel utiliza??o na fabrica??o de massas segundo crit?rios tecnol?gicos e de atendimento ? legisla??o vigente. Foram fabricados macarr?es tipo espaguete adicionando 10% e 20% de farinha integral e 10% e 20% de farinha de linha?a com realiza??o de an?lises f?sicoqu?micas, sensoriais e reol?gicas dos produtos. Al?m disso, foram feitas an?lises de aceita??o do produto e de estimativa do custo de produ??o, de forma a criar subs?dios para possibilitar a introdu??o dos produtos de maior aceita??o e viabilidade econ?mica no mercado pela ind?stria aliment?cia. Na reologia do produto foi realizado o teste de cozimento das massas, com especifica??o do aumento de volume, tempo de cozimento e percentual de res?duos s?lidos. Na avalia??o sensorial foram realizados o teste triangular de diferencia??o de produtos com 50 julgadores treinados e o teste de aceita??o por escala hed?nica com avalia??o conjunta dos aspectos cor, sabor, odor e textura. Na defini??o do perfil sensorial do produto foi realizada ADQ com 9 julgadores recrutados e treinados na unidade fabril, utilizando escala n?o estruturada de 9 cm, avaliando os atributos flavour de trigo, flavour de linha?a, consist?ncia, textura do macarr?o cru, cor do macarr?o cru e cor do macarr?o cozido. O produto de maior aceita??o e boa qualidade foi o macarr?o com 20% de farinha integral, seguido dos produtos 10% integral, 10% linha?a e 20% linha?a; caracterizados de m?dia qualidade, pelo crit?rio da an?lise de perda de s?lidos, juntamente com massa integral comercial testada. Na avalia??o da estimativa do custo de produ??o, os dois produtos mais aceitos e vi?veis tecnologicamente (20% integral e 10% linha?a) foram avaliados nos processos a alta temperatura. Com custo total de R$ 4.872,5/1000 kg e R$ 5.354,9/1000 kg respectivamente, o diferencial esteve relacionado com a adi??o de insumos de menor e maior valor agregado no mercado, farinha integral e farinha de linha?a. Na an?lise comparativa dos processos foi confirmada a redu??o no tempo de produ??o (10h), com maior uniformidade do produto para o processo de secagem a alta temperatura frente ao convencional

This diploma thesis deals with packaging materials in company Frauenthal Automotive Hustopeče, s. r. o., specifically proposals to improve the storage, flow and use of packaging material with limited storage capacity. The first part contains the theoretical basis of the work. The second part includes a presentation of the company and an analysis of the current situation. In the last part, own solutions to current shortcomings in the company are proposed.

This thesis is focused on lean management of the production system in the company ASSA ABLOY Czech & Slovakia s. r. o. The main outcome is the proposal of a new layout and process balancing with the use of lean manufacturing methods. The first part describes the theoretical basics which are used for analysis afterwards. The results of these analyses are then used as a main basis for the proposal of changes in the chosen part of the production process.

This diploma thesis deals with the issue of material flow and lean manufacturing in a given section of a selected manufacturing company. The diploma thesis focuses on the weaknesses of the current state of the selected workplace and defines the areas for improvement. The first part presents the theoretical basis of the work. The second part of the work is focused on analyzing the current state of the workplace. There are provided solutions for better material flow and to implement selected elements of lean manufacturing in the last part.

The diploma thesis is focused on proposal of internal production supply in the Walter Ltd. The company is undergoing changes in the production layout and therefore it is necessary to design a new system of production supply. The theoretical part focuses on Toyota production system and methods used in this system. Next part of the theoretical part is dedicated to lean management and lean manufacturing. The last point of theoretical part are supplying and material handling. The theoretical part is basis for analytical part in which is mapped the current state of supplying production lines. The last point of diploma thesis are solution proposals based on analytical data’s.

Denna rapport utreder möjligheterna till att reducera ledtiden, med en uppskattning av minst 10%, för plockprocessen på den utlevererande avdelningen som kallas den ”avgående avdelningen” hos EJOT Sverige AB i Örebro. Företaget vill i dagsläget skapa sig en tydlig helhetsbild av processen samt få underlag, för eventuell framtida implementering, i form av förbättringsförslag för en ledtidsreducering. Under arbetets gång beskrivs nuläget utifrån datainsamling, intervjuer och observationer, i kombination med ett spagettidiagram som presenteras. De möjliga rotorsakerna till problemen kartläggs genom att skapa ett fiskbensdiagram som sedan analyseras. Analyserna visar på att processen är komplex och därmed även problemen. Orsaker som valts för vidare analys är: layout, körslinga och placering av låga gods.  Tre förbättringsförslag har tagits fram utifrån analyserna och dessa handlar om att skapa en ny optimerad layout, en ny optimerad körslinga samt att eliminera placeringen av låga gods.  Det fortsatta arbetet bör vara att optimera en ny lagerlayout samt se över och standardisera en ny körslinga. Företaget bör också se över möjligheterna att eliminera placeringen av gods på markplan. / This report investigates the possibilities of reducing the lead time, with an estimate of at least 10%, for the picking process at the delivery unit called the “outgoing department” at EJOT Sverige AB in Örebro. The company currently wants to create an overall picture of the process and get a basis, for possible future implementation, in the form of improvement proposals for a lead time reduction. During the work, the current situation is described based on data collection, interviews and observations, in combination with a spaghetti diagram that is presented. The possible root causes of the problems are mapped by creating an Ishikawa diagram which is then analyzed. The analyses show that the process is complex and thus also the problems. Reasons chosen for further analysis are: layout, driving loop and placement of low goods. Three improvement proposals have been developed based on the analyses and these are about creating a new optimized layout, a new optimized driving loop and eliminating the placement of low goods. The continued work should be to optimize a new warehouse layout and review and standardize a new driving loop. The company should also review the possibilities of eliminating the placement of goods on the ground floor.

The project was performed at Parker Hannifin Cylinder Division at Falköping, where a station in the most critical flow at the production has been studied, which is the hand welding station. Within this report, the purpose is to identify disturbances, in order to eliminate and reduce these by coming up with improvement proposals. Furthermore, the aim is to help improve the company's work with 5S and TPM (Total Productive Maintenance). A combination of tools and concepts are being used in this project when generating improvement proposals to avoid the risk of falling back into old habits and facilitate the work. The combination of concepts, intends to be continued to work with, in order to facilitate for the company to reach even higher results.The methodology of TPM is the basis of the project, although it is not about a complete implementation of TPM, but is limited to chosen parts since it is a time consuming process that can go on for years. The main focus of TPM is about the first pillar, 5S. Action plans for how to solve these problems and how to achieve the desired state has been established.Thereafter, the researchers in cooperation with the company´s staff have implemented a couple of small improvement proposals. Further improvement proposals have also been presented in this report, but due to the limited time no implementations was made.Moreover, this project is divided into a couple of phases. Situational analysis has been made through both interviews with staff and observation studies. Analysis has also been made by some numeric data taken out by researchers and partly through mapping the equipment. The intention of this is to create a status image of the current situation over the hand welding station. The current state has shown the appearance of problems and challenges that exist. Additional wastages and disturbances in the station can come up to the surface and can thus easily be identified. In turn, occurring wastages and disturbances can be eliminated and the amount of wasted time reduced with help of the action plans to reach a future state.Another method that occurs is spaghetti charts. It has been used for mapping up the existing procedures during the process of the orders in the station, and by that identified different types of disturbances. In addition, the creation of a Value Stream Mapping (VSM) has been made. The map is used as a measurement to identify how much time on a working day that is spent as value adding time and non-value adding time of work.