Yes / Semiconductor nanostructures like CdSe quantum dots and colloidal nanoplatelets exhibit remarkable optical properties, making them interesting for applications in optoelectronics and photocatalysis. For both areas of application a detailed understanding of the electronic structure is essential to achieve highly efficient devices. The electronic structure can be probed using the fact that optical properties of semiconductor nanoparticles are found to be extremely sensitive to the presence of excess charges that can for instance be generated by means of an electrochemical charge transfer via an electrode. Here we present the use of potential modulated absorption spectroscopy (EMAS) as a versatile spectroelectrochemical method to obtain absolute band edge positions of CdSe nanostructures versus a well-defined reference electrode under ambient conditions. In this the spectral properties of the nanoparticles are monitored dependent on an applied electrochemical potential. We developed a bleaching model that yields the lowest electronic state in the conduction band of the nanostructures. A change in the band edge positions caused by quantum confinement is shown both for CdSe quantum dots as well as for colloidal nanoplatelets. In the case of CdSe quantum dots these findings are in good agreement with tight binding calculations. The method presented is not limited to CdSe nanostructures but can be used as a universal tool. Hence, this technique allows the determination of absolute band edge positions of a large variety of materials used in various applications.

No description available.

No description available.

No description available.

No description available.

Denaturation and renaturation is indispensable for the biological function of nucleic acids in many cellular processes, such as for example transcription for the synthesis of RNA and DNA replication during cell division. However, the reversible hybridisation of complementary nucleic acids is equally crucial in nearly all molecular biology technologies, ranging from nucleic acid amplification technologies, such as the polymerase chain reaction, and DNA biosensors to next generation sequencing. For nucleic acid amplification technologies, controlled DNA denaturation and renaturation is particularly essential and achieved by cycling elevated temperatures. Although this is by far the most commonly used method, the management of rapid temperature changes requires bulky instrumentation and intense power supply. These factors so far precluded the development of true point-of-care tests for molecular diagnostics. This Thesis explored the possibility of using electrochemical means to control reversible DNA hybridisation by using electroactive intercalators. First, fluorescence-based melting curve analysis was employed to gain an in depth understanding of the reversible process of DNA hybridisation. Fundamental properties, such as stability of the double helix, were investigated by studying the effect of common denaturing agents, such as formamide and urea, pH and monovalent salt concentration. Thereafter, four different electroactive intercalators and their effect on the thermodynamic stability of duplex DNA were screened. The intercalators investigated were methylene blue, thionine, daunomycin and adriamycin. Absorbance-based melting curve analysis revealed a significant increase of the melting temperature of duplex DNA in the presence of oxidised daunomycin. This was not observed in the presence of chemically reduced daunomycin, which confirmed the hypothesis that switching of the redox-state of daunomycin altered its properties from DNA binding to non-binding. Accordingly this altered the thermodynamic stability of duplex DNA. The difference in the stability of duplex DNA, as a direct result of the redox-state of daunomycin, was exploited to drive cyclic electrochemically controlled DNA denaturation and renaturation under isothermal conditions. This proof-of-principle was demonstrated using complementary synthetic 20mer and 40mer DNA oligonucleotides. Analysis with in situ UV–vis and circular dichroism spectroelectrochemistry, as two independent techniques, indicated that up to 80 % of the duplex DNA was reversibly hybridised. Five cycles of DNA denaturation and renaturation were achieved and gel electrophoresis as well as NMR showed no degradation of DNA or daunomycin. As no extreme conditions were implicated, no covalent modification of DNA was required and isothermal conditions were kept, this finding has great potential to simplify future developments of miniaturised and portable bioanalytical systems for nucleic acid-based molecular diagnostics.

A new sensor technology based on optical diffraction of visible light shows promise for sensing metal ions and other species that employ chemically-responsive metal oxide and conducting polymer grating elements. These materials undergo reversible redox processes upon interaction with a chemical analyte that subsequently induces changes in the materials refractive index. The two key design parameters of this sensing technique involve preparation of micropatterned sensor elements and the evaluation of appropriate wavelengths for detection of diffracted light. Much of the ability to “tune” a desired sensing response is dictated by the understanding of how factors of size, dimension, crystallinity, morphology, porosity, and heterogeneity influence analyte/sensor interactions (i.e., adsorption, binding, and transport). The effect of composition, structure, and morphology of MoO₃, WO₃, Moₓ W₁₋ₓO₃, IrOₓ and polyaniline grating materials on chemical, electrochemical and optical properties of these systems will be examined by a range of spectroscopic and electrochemical techniques. Comprehensive evaluation and correlation of materials’ optical properties to diffraction-based detection will advance understanding of the capabilities and limitations for the diffraction-based sensing methodology. This information can then used to determine optimal sensing parameters to improve detection limits, enhance sensitivity and increase the dynamic range for detection of model analytes. / text

Understanding interfacial charge injection processes is one of the key factors needed for development of efficient organic electronic devices, such as biosensors and energy conversion systems, since these processes control the electrical characteristics of these devices. Spectroelectrochemical characterization of electron transfer processes occurring at the electrode - electroactive thin film interface has been evaluated to improve our understanding of charge transfer kinetics using a novel form of electroreflectance spectroscopy, potential-modulated attenuated total reflectance (PM-ATR), which makes it possible to sensitively monitor spectroscopic changes in thin films as a function of applied potential.PM-ATR was used to evaluate three different redox-active films deposited on indium tin oxide (ITO) electrodes to investigate: i) the orientation dependence of charge transfer rates of thin films of biomolecules, ii) surface treatment and modification effects on charge transfer kinetics of conducting polymers and, iii) estimation of rates of electron injection and conduction band edge of semiconductor nanocrystalline materials.First, Prussian blue film as a model system was used successfully to examine the PM-ATR technique for determination of the charge transfer rate constant between ITO and a molecular film.Second, an anisotropic and redox active protein film, cytochrome c, was used to probe charge transfer rates with respect to molecular orientation. The electron transfer rate measured using TM polarized light was four-fold greater than that measured using TE polarized light. These data are the first to correlate a distribution of molecular orientations with a distribution of electron transfer rates in a redox-active molecular film.Third, the effects of ITO surface treatment and modification on charge transfer kinetics on a conducting polymer, poly(3,4-ethylenedioxythiophene/)/poly(styrenesulfonate) (PEDOT/PSS), were studied. The apparent interfacial charge transfer rate constant for PEDOT/PSS on ITO has been reported for the first time which cannot be measured otherwise with conventional electrochemistry due to high non-Faradaic background of PEDOT/PSS films.Fourth, PM-ATR enabled characterization of reversible redox processes between submonolayer coverages of surface-tethered, CdSe nanocrystals and ITO for the first time. Optically determined onset potentials for electron injection were used for estimation for the conduction band and valance band energies (ECB and EVB, respectively).

Three novel diferrocenyl complexes were prepared and characterised. 2,2-Diferrocenyl-4,5-dimethyl-3,6-dihydro-2H-thiopyran (1, sulphide) was accessible by the hetero-Diels–Alder reaction of diferrocenyl thioketone with 2,3-dimethyl-1,3-butadiene. Stepwise oxidation of 1 gave the respective oxides 2,2-diferrocenyl-4,5-dimethyl-3,6-dihydro-2H-thiopyran-1-oxide (2, sulfoxide) and 2,2-diferrocenyl-4,5-dimethyl-3,6-dihydro-2H-thiopyran-1,1-dioxide (3, sulfone), respectively. The molecular structures of 1 and 3 in the solid state were determined by single crystal X-ray crystallography. The oxidation of sulphide 1 to sulfone 3, plays only a minor role on the overall structure of the two compounds. Electrochemical (cyclic voltammetry (= CV), square wave voltammetry (= SWV)) and spectroelectrochemical (in situ UV-Vis/NIR spectroscopy) studies were carried out. The CV and SWV measurements showed that an increase of the sulphur atom oxidation from −2 in 1 to +2 in 3 causes an anodic shift of the ferrocenyl-based oxidation potentials of about 100 mV. The electrochemical oxidation of 1–3 generates mixed-valent cations 1+–3+. These monooxidised species display low-energy electronic absorption bands between 1000 and 3000 nm assigned to IVCT (= Inter-Valence Charge Transfer) electronic transitions. Accordingly, the mixed-valent cations 1+–3+ are classified as weakly coupled class II systems according to Robin and Day. / Dieser Beitrag ist aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

This thesis concerns the electrochemical investigation of high-potential laccases. These multicopper oxidases are efficient electrocatalysts for the dioxygen reduction reaction. A method for stabilising laccase on a graphite electrode was established. The method involved modification of the graphite surface by diazonium coupling of a 2-anthracene molecule. A laccase ‘film’ adsorbed on this modified surface remained stable for over two months and, typically, the current density for dioxygen reduction was doubled compared to a laccase ‘film’ on an unmodified surface. Protein film voltammetry was used to investigate thermodynamic and kinetic aspects of the electrochemical behaviour of laccase. The effect of inhibitors on the magnitude of reduction current and the position of the wave (related to the overpotential for the reaction) was also studied. Fluoride, chloride and azide showed different modes of inhibition and inhibition constants ranged from micromolar for azide to millimolar for chloride. In cyclic voltammetry experiments it was only in the presence of high concentrations of the inhibitors fluoride, chloride and azide that a non-turnover signal, corresponding to a one electron transfer process, was revealed. The evidence suggested that the non-turnover signal arose from interfacial electron transfer between the electrode and the type 1 or ‘blue’ copper. Evaluation of the peak areas allowed determination of the catalytic rate constant, kcat, as 300 s–1, and the electroactive surface coverage as four pmol cm–2. The rate of interfacial electron transfer was rapid enough to not limit catalysis at high overpotentials. A spectroelectrochemical cell was designed to investigate the behaviour of the type 1 copper in the presence of inhibitors and at different pH values. The inhibitors fluoride, chloride and azide had little effect on the reduction potential of the type 1 copper, but at higher pH values the reduction potential of the type 1 copper was decreased.