På senare år har efterfrågan på stålmaterial av låg vikt ökat, speciellt inom transportsektorn. Genom att addera Al till stål sänks densiteten vilket gör att FeAl-legeringar är ett lovande material för fordonskonstruktion. Vätskekorrosionsegenskaper undersöktes av 3D – printade FeAl prover som innehöll 0 – 10 vikt% Al och 0,1 vikt% Zr för att bestämma hur korrosionsegenskaperna förändrades med avseende på Al – innehållet. Korrosionsresistansen var i stor utsträckning beroende av huruvida en passiv film av Al2O3 bildades på ytan eller ej. Korrosionshastigheten bestämdes genom EIS – och PDP – analyser utförda i 3,5 vikt% NaCl-lösning samt genom viktförlusttester i 1 M HCl respektive 0,5 M H2SO4. Vidare karaktäriserades proverna genom XRF, XRD, EDS, SEM och optisk mikroskopi vilket bland annat visade på att samtliga prover var enfassystem samt att den kemiska sammansättningen var enligt förväntan. Vidare indikerade optisk mikroskopi och SEM att ett högre Al – innehåll resulterar i att proverna blir mer porösa. Elektrokemiska tester antyder att ett Al – innehåll om 10 vikt% förbättrade korrosionsresistansen. Detta antyder möjligen, men kan inte definitivt fastslås från de utförda experimenten, att det krävs 10 vikt% Al för att en passiv film som täcker hela materialytan ska bildas. Korrosionshastigheten var 7 – 10 gånger högre vid viktförlusttest jämfört med elektrokemiska test. Detta förklaras genom att den skyddande passiva filmen bröts ned under de sura förhållanden som viktförlusttesten utfördes i medan den passiva Al2O3 filmen kunde bestå i de pH – neutrala förhållanden som elektrokemiska test utfördes vid. Detta speglar att bildandet och stabiliteten av Al2O3-filmen är vitalt för att sänka korrosionshastigheten. / In recent years the demand for lightweight ferritic steels has increased, particularly for transport applications. The addition of Al lowers the density, hence making FeAl alloys promising materials for such constructions. Aqueous corrosion properties of 3D – printed FeAl samples ranging from 0 – 10 wt% Al and containing 0.1 wt% Zr were investigated to determine how the Al content affects the corrosion resistance. The corrosion rate was found to greatly depend on the formation and stability of a protective passive film of Al2O3 forming on the material surface. A corrosion rate was obtained via EIS and PDP in 3.5 wt% NaCl as well as via weight loss testing in 1 M HCl and 0.5 M H2SO4. Additionally, XRF, XRD, EDS, SEM and optical microscopy tests were carried out to characterize the samples. XRF and EDS confirmed that the elemental composition of the samples was as expected and XRD indicated that all samples were single phase systems. Furthermore, optical microscopy and SEM indicated that higher Al content makes the samples more porous. Electrochemical testing indicated that addition of 10 wt% Al greatly improves the corrosion properties suggesting that it may require 10 wt% Al to form a passive film that covers the whole surface, although this cannot be said for certain from these experiments. Moreover, the corrosion rate was 7 – 70 times lower during electrochemical testing compared to weight loss testing, in which the passive film breaks down due to the acidic conditions. This emphasizes that the stability of the Al2O3 film is vital for slowing down the corrosion rate of FeAl alloys.

Solid-state supercapacitors (SSCs) consist of porous carbon electrodes and gel-polymer electrolytes and are used in novel energy storage applications. The current study aims to simulate the impedance of SSCs using a clearly defined equivalent circuit (EC) model with the ultimate goal of improving their performance. To this end, a conventional mathematical and a physicochemical model were adapted. The impedance was measured by electrochemical impedance spectroscopy (EIS). An EC consisting of electrical elements was introduced for each modeling approach. The math- ematical model was purely based on a best-fit method and utilized an EC with intuitive elements. In contrast, the physicochemical model was motivated by advanced theories and allowed meaningful associations with properties at the electrode, the electrolyte, and their interface. The physicochemical model showed a higher approximation ability (relative error of 3.7%) due to the interface impedance integration in a more complex circuit design. However, this model required more modeling and opti- mization effort. Moreover, the fitted parameters differed from the analytically calculated ones due to uncertainties in the SSC’s microscale configuration, which need further investigations. Nevertheless, the results show that the proposed physicochemical model is promising in simulating EIS data of SSCs with the additional advantage of utilizing well-reasoned property-based EC elements.

Durch elektrochemische Impedanzspektroskopie während der anodischen Oxidation von Aluminium werden in der vorliegenden Arbeit die elektrochemischen Vorgänge während der Oxidbildung quantitativ und zeitabhängig untersucht. Es wird ein Modell vorgeschlagen und diskutiert, welches das Impedanzverhalten während der anodischen Oxidation in Schwefel-, Oxal- und Phosphorsäure über einen großen Bereich von Konzentrationen und Stromdichten abbilden kann. Aus den gewonnenen Ergebnissen werden die kapazitive Wirkung der Sperrschicht am Porengrund, der Eintritt von Ladungsträgern in die Sperrschicht, der Ionentransport durch die Sperrschicht sowie die Oxidbildungsreaktion selbst als wesentlich für das Impedanzverhalten identifiziert. Die ermittelten Zusammenhänge und Konstanten können als Grundlage für Modellvorstellungen dienen, welche das Verhalten elektrischer Prozessgrößen und die Ausbildung der charakteristischen Oxidstruktur bei der anodischen Oxidation von Aluminium verknüpfen. / In the present work, the electrochemical subprocesses of the oxide formation on aluminium by anodic oxidation are investigated using electrochemical impedance spectroscopy. The time dependence of the impedance behaviour and the quantitative relations between the process parameters and the impedance behaviour are considered. A model for the representation of the electrochemical behaviour during the anodic oxidation in sulphuric, oxalic and phosphoric acid is proposed and discussed for a wide range of anion concentrations and current densities. On the basis of the obtained results, the capacitive effect of the barrier layer, the charge transfer resistance of the barrier layer, the ion transport within the barrier layer and the oxide formation are identified as the dominating effects for the impedance behaviour. The established relations can serve as a basis for models, which interrelate both the electrochemical behaviour and the geometrical formation of the characteristic pore structure.

L’alliage d’aluminium 2024 est très répandu dans l’industrie aéronautique et automobile. Le processus de corrosion peut entrainer des dommages irréversibles pouvant engendrer des issues fatales dans le domaine aéronautique. Ainsi plusieurs couches de revêtements sont déposées à la surface du métal à protéger pour prévenir le processus de corrosion. Depuis le début du 20ième siècle, le chrome hexavalent (CrVI) a été largement utilisé comme inhibiteur de corrosion dans les différentes couches du revêtement (prétraitement, primer et top-coat). La toxicité de ce composé envers l’homme et l’environnement a entrainé son interdiction et donc son remplacement comme agent de protection. Le confinement d’agent anticorrosif dans des nano-conteneurs a ainsi été reporté puisqu’un effet auto-réparant, en relargant sur demande, peut-être apporté : l’inhibiteur de corrosion agit quand le dommage apparait. Cette étude est focalisée sur l’utilisation de matériaux de type Hydroxydes Doubles Lamellaires (HDL) comme réservoir d’inhibiteurs de corrosion en raison leur propriété d’échange. Dans ce travail, plusieurs molécules ont été étudiées comme potentiel inhibiteur de corrosion. Celles-ci ont été tout d’abord caractérisées par DC-polarisation afin de déterminer la nature de leur comportement inhibiteur (anodique, cathodique ou les deux). Ensuite, ces agents anticorrosifs ont été intercalés dans des matrices HDL et leur capacité de relargage ainsi que leur comportement face au processus de corrosion ont été étudiés. Les particules HDL ainsi obtenues ont été dispersées dans la formulation d’un revêtement primaire et déposé directement sur l’alliage aluminium 2024. La résistance à la corrosion a été suivie par spectroscopie d’impédance complexe. Les propriétés d’auto-protection de notre revêtement (relargage d’agent anticorrosive encas de dommage) et leur propriété barrière, apportée par la morphologie lamellaire des nano-conteneurs, entrainant une diminution de la perméabilité aux espèces agressives (ex. eau, O2, électrolyte) responsable de l’apparition de cloques sur les revêtements, ont ainsi été caractérisées. / Aluminum alloy 2024 is widely used in aircraft and automotive industry. Corrosion processes can provide irreversible damage on the metal substrate which could have a tragic issue in the aircraft domain. Thus, several coating layers have been applied on the metal substrate to prevent corrosion process. Since the beginning of the 20th century, hexavalent chromate compounds have been extensively used as corrosion inhibitor agents for paint, primer and conversion coating. The toxicity for human health and environment has led to replace such compounds. The literature has reported different possibilities to replace such unfriendly compounds. Moreover, the entrapment of corrosion inhibitors in nanocontainer provides a self-healing effect by releasing, on demand, the active species when damage occurs. This study focuses on Layered Double Hydroxide (LDH) material as reservoir due to its exchange properties. This study has characterized several potential corrosion inhibitor molecules by DC-Polarization to determine the nature of the inhibitor compound (i.e. anodic, cathodic or both of them). Further, active anticorrosive species have been intercalated into LDH framework. Then, the release of inhibitor agents and their subsequent behaviour toward corrosion inhibition have been evaluated. Modified LDH materials have been further dispersed in the primer coating formulation and applied on aluminum alloys 2024 substrate. Corrosion inhibition has been followed by electrochemical impedance spectroscopy experiments on scratched and unscratched panel which have permitted to evaluate the self-healing property of these modified LDH materials when damage occurs and the barrier property provided by the lamellar morphology of the inorganic reservoir that is found to decrease the permeation by enhancing the tortuosity of the coating layer towards aggressive species (i.e. water, O2, electrolyte) responsible of the blistering phenomenon.

<p>In this work, a simple, less time consuming electrochemical method in the form of an electrochemical sensor has been developed for the detection of PAHs. The sensor was fabricated by the deposition of silver-gold (1:3) alloy nanoparticles (Ag-AuNPs) on ultrathin overoxidized polypyrrole (PPyox) film which formed a PPyox/Ag-AuNPs composite on glassy carbon electrode (PPyox/Ag-AuNPs/GCE). The silver-gold alloy nanoparticles deposited to form the composite were chemically prepared by simultaneous reduction of silver nitrate (AgNO3) and chloroauric acid (HAuCl4) using sodium citrate and characterized by UV-visible spectroscopy technique which confirmed the homogeneous formation of the alloy nanoparticles.</p>

<p>Iron oxide nanoparticles were prepared using co-precipitation method in the presence and absence of beta-cyclodextrin (&beta / -CD). Such materials were characterized using transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), attenuated total reflection Fourier transform infrared (ATR-FTIR), X-ray diffraction (XRD), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and chronoamperometry (CA). The TEM shows that the surface morphology has no difference between nanoparticles prepared in the presence and absence of beta-cyclodextrin (&beta / -CD), amorphous particles with high surface area and dimensions of about 100 nm by 500 nm. The amorphous states of nanoparticles are confirmed further by XRD. The ATR-FTIR analysis confirms inclusion complex between &beta / -CD and nanoparticles.</p>

<p>Iron oxide nanoparticles were prepared using co-precipitation method in the presence and absence of beta-cyclodextrin (&beta / -CD). Such materials were characterized using transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), attenuated total reflection Fourier transform infrared (ATR-FTIR), X-ray diffraction (XRD), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and chronoamperometry (CA). The TEM shows that the surface morphology has no difference between nanoparticles prepared in the presence and absence of beta-cyclodextrin (&beta / -CD), amorphous particles with high surface area and dimensions of about 100 nm by 500 nm. The amorphous states of nanoparticles are confirmed further by XRD. The ATR-FTIR analysis confirms inclusion complex between &beta / -CD and nanoparticles.</p>

<p>In this work, a simple, less time consuming electrochemical method in the form of an electrochemical sensor has been developed for the detection of PAHs. The sensor was fabricated by the deposition of silver-gold (1:3) alloy nanoparticles (Ag-AuNPs) on ultrathin overoxidized polypyrrole (PPyox) film which formed a PPyox/Ag-AuNPs composite on glassy carbon electrode (PPyox/Ag-AuNPs/GCE). The silver-gold alloy nanoparticles deposited to form the composite were chemically prepared by simultaneous reduction of silver nitrate (AgNO3) and chloroauric acid (HAuCl4) using sodium citrate and characterized by UV-visible spectroscopy technique which confirmed the homogeneous formation of the alloy nanoparticles.</p>

Des oxydes appartenant au type structural Ruddlesden-Popper (RP) sont des matériaux de cathode prometteursdes piles à combustible à oxyde électrolyte solide (SOFC) fonctionnant à température intermédiaire (~ 500-700 °C). L’objectif de cette thèse est l’élaboration de conducteurs ioniques et électroniques, mixtes (MIEC) tels que la solution solide, La2-xPrxNiO4+δ, 0 ≤ x ≤ 2, des phases RP de formule Lan+1NinO3n+1 (n= 1, 2 and 3) et les composites associés à la cérine gadoliniée, Ce0.9Gd0.1O2-δ (CGO).Une microstructure et une architecture innovantes de ces électrodes ont été obtenues avec succès en utilisant l’atomisation électrostatique (ESD) et la sérigraphie (SP). La structure, la composition, la non-stoechiométrie en oxygène et la microstructure de ces matériaux ont été caractérisées par diffraction des rayons X, par spectroscopie de rayons X à dispersion d'énergie, par analyse thermogravimétrique et par microscopie électronique à balayage. Les propriétés électrochimiques et la stabilité chimique de ces électrodes à oxygène sont discutées en fonction de leur architecture et de la composition en utilisant la spectroscopie d'impédance électrochimique (SIE) et la diffraction des rayons X, respectivement. Enfin, une cellule complète SOFC intégrant la cathode LaPrNiO4+δ a été testée.Mots Clés: Pile à combustible à haute température (SOFC), Conducteur ionique et électronique mixte (MIEC), Cathode, Nickelates, Ce0.9Gd0.1O2-δ (CGO), Microstructure de type corail, Design architectural, Interfaces, Stabilité chimique, Atomisation électrostatique (ESD), Sérigraphie (SP), Spectroscopie d’impédance électrochimique (EIS). / Layered Ruddlesden-Popper type (RP) oxides are promising cathodes for solid oxide fuel cells operating at intermediate temperature (~500 - 700 °C).This thesis is focused on the synthesis of mixed ionic-electronic conducting materials such as pure La2-xPrxNiO4+δ, 0 ≤ x ≤ 2, higher order Lan+1NinO3n+1 (n= 1, 2 and 3) RP phases and composites adding Ce0.9Gd0.1O2-δ (CGO) component. An innovative microstructure and architecture of these electrodes were successfully prepared using electrostatic spray deposition (ESD) and screen-printing (SP) processes. These materials were evaluated through structural, compositional, oxygen non-stoichiometry and microstructural characterizations using X-ray diffraction, energy-dispersive X-ray spectroscopy, thermogravimetric analysis and scanning electron microscopy. The electrochemical properties and chemical stability of these oxygen electrodes are discussed according to the architectural design and composition using electrochemical impedance spectroscopy (EIS) and X-ray diffraction, respectively. Finally, a single SOFC based on LaPrNiO4+δ cathode has been tested.Keywords: Solid Oxide Fuel cell(SOFC), Mixed Ionic and Electronic Conductor (MIEC), Cathode, Nickelates, Ce0.9Gd0.1O2-δ (CGO), Coral-type microstructure, architectural design, interfaces, chemical stability, Electrostatic Spray Deposition (ESD), Screen-Printing (SP), Electrochemical Impedance Spectroscopy (EIS).

Magister Scientiae - MSc / Polyaromatic hydrocarbons (PAHs) are ubiquitous environmental pollutants that have been shown to be teratogenic, mutagenic and carcinogenic and pose serious threats to the health of aquatic and human life. Several methods have been developed for their determination such as immunoassay, gas chromatography and high performance liquid chromatography (HPLC) in combination with fluorescence or absorbance detection. However, these methods are known to manifest underlying disadvantages such as complicated pretreatment, high costs and time consuming processes. In this work, a simple, less time consuming electrochemical method in the form of an electrochemical sensor has been developed for the detection of PAHs. The sensor was fabricated by the deposition of silver-gold (1:3) alloy nanoparticles (Ag-AuNPs) on ultrathin overoxidized polypyrrole (PPyox) film which formed a PPyox/Ag-AuNPs composite on glassy carbon electrode (PPyox/Ag-AuNPs/GCE). The silver-gold alloy nanoparticles deposited to form the composite were chemically prepared by simultaneous reduction of silver nitrate (AgNO3) and chloroauric acid (HAuCl4) using sodium citrate and characterized by UV-visible spectroscopy technique which confirmed the homogeneous formation of the alloy nanoparticles. Transmission electron microscopy showed that the synthesized nanoparticles were in the range of 20-50 nm. The properties of the composite formed upon deposition of the nanoparticles on the PPyox film were investigated by electrochemical methods. The PPyox/Ag-AuNPs/GCE sensor showed strong catalytic activity towards the oxidation of anthracene, phenanthrene and pyrene, and was able to simultaneously detect anthracene and phenanthrene in a binary mixture of the two. The catalytic peak currents obtained from square wave voltammetry increased linearly with anthracene, phenanthrene and pyrene concentrations in the range of 3.0 x 10-6 to 3.56 x 10-4 M,3.3 x 10-5 to 2.83 x 10-4 M, 3.3 x 10-5 to 1.66 x 10-4 M and with detection limits of 0.169 μM, 1.59 μM and 2.70 μM, respectively. The PPyox/Ag-AuNPs/GCE sensor is simple, has antifouling properties and is less time consuming with a response time of 4 s. / South Africa