No description available.

No description available.

This master thesis concerns the development of a refilling position and solution, for washer fluid. As well as a study and development of the use of a secondary washer fluid for winter and summer use. The focus of this work, however, has been on the development of the regular washer fluid with regards to creating a user-friendly ergonomic solution with a premium feel, that improves the user experience and simplifies the refilling process for the user. The automotive industry today is constantly evolving and always strive to improve their products in most areas when it comes to the environment and their clients, etc. Despite this, the process of refilling washer fluid has not been developed in the modern automotive history. The refilling of washer fluid today, looks the same as it ”always” has done. This takes place under hood in a small dirty compartment, with a relatively small tube opening where the user must aim the washer fluid when pouring. To get there, the user must carry out several unnecessary steps to get under the bonnet, where the user does not necessarily have anything to do. This, even though other areas around the washer fluid has evolved a lot, in terms of wiper blades and washer fluid nozzles. The work is done with Volvo Cars Cooperation as clients. Volvo Cars is a Swedish car manufacturer that manufactures passenger cars, which they have done since 1927, when the company started. They are aiming to become the world’s most modern and attractive premium car brand, a leader in innovation and people-centered development. They strive to make the life easier and more enjoyable for their users. Since Volvo has the intention to always improve their products to their users and make life easier for them, this project has used a human-centered design process. The work was done together with the demands and requests from the involved departments at Volvo Cars as well as customer surveys and interviews with mechanics. To find a solution that satisfies all stakeholders and Standards it required an iterative approach and design work.  The work resulted in two concepts where both ordinary and secondary washer fluid can be filled, these prototypes were made and built into a Volvo XC60, 3D renderings of these, as well as an interface for the secondary washer fluid. These solutions have made the process of refilling washer easier with less steps for the and gives a feeling of a premium and innovative solution.

The work aims to study different methods suitable for de-icing and ice prevention of vehicle headlamps and tail lamps, especially LED-lights. Furthermore, the work aims to investigate the scale of the problem with insufficient or lack of de-icing on automotive lamps depending on the region and the environment the vehicle operates in. The problem with insufficient de-icing in automotive lamps was investigated by observations, tests of various lamps and a driver survey. Deicing methods were identified through a litera-ture review. The methods were studied in detail, and some were also evaluated by tests. The tests were narrowed down to temperature measurements and de-icing measurements. The latter were performed using a test method especially developed for the task. The collected data was used to evaluate whether actions are needed to be taken and to form recommen-dations for future developments. The number one priority should be to improve the tail lamps de-icing ability. Headlamps can also be improved but there is no imminent need. Insufficient de-icing of headlamps and tail lamps can potentially be a problem in all areas subjected to cold winter climate. Tail lamps should be fitted with electrical heating in order to improve the de-icing ability. They should be positioned so that snow and ice does not stack on top of them. The de-icing time of tail lamps should be less than 10 min. Truck drivers needs to be better in scraping their headlamps and tail lamps. The time needed for de-icing Scania’s H7 headlamps is 20 min for halogen version and 35 min for xenon version at -18 °C. This should be compared to the BMW LED-headlamp which needs 65 min to complete de-icing. LED-headlamps are probably limited to a de-icing time of approximately 60 min unless additional heat is added to the headlamp lens. The fastest and most efficient way to de-ice the headlamps is to use hot washer fluid. Electrically heated lenses are also effective but the de-icing process is slower. The proposed test method is a simple and effective way to compare and evaluate headlamps and tail lamps without knowing internal airflows and light sources. The way the ice layer is created on the device under test is unique to this method. The created ice layer is extremely uniform and the results are easy to evaluate. / Sammanfattning Arbetets syfte är att undersöka olika avisningsmetoder och isförebyggande åtgärder för hu-vudstrålkastare och baklyktor, speciellt LED-lampor. Ytterligare syfte är att undersöka hur stort problemet med otillräcklig avisning är beroende på vilken region och miljö som fordonen körs i. Problemet med otillräcklig avisning av fordonsbelysning har undersökts genom observatio-ner, en förarenkät samt genom tester av olika strålkastare och baklyktor. Avisningsmetoder har identifierats genom en litteraturstudie. Metoderna har studerats i detalj och några har även utvärderats genom tester. Testerna har utförts enligt en för uppgiften framtagen testme-tod. De insamlade uppgifterna har sedan används för att utvärdera om åtgärder behöver vid-tas och för att ge rekommendationer för framtida utvecklingsprojekt. Första prioritet bör vara att förbättra baklyktornas avisningsförmåga. Huvudstrålkastarna kan även de förbättras men det föreligger inte i dagsläget något akut behov av det. Otillräcklig avisning av huvudstrålkastare och bakljus kan potentiellt vara ett problem i alla miljöer med ett kallt vinterklimat. Baklyktorna bör utrustas med en eluppvärmd lins för att förbättra avis-ningen. Lamporna bör placeras på ett sådant sätt att snö och is inte kan ansamlas ovanpå dem. Avisningstiden för en baklykta bör inte överstiga 10 min. Lastbilschaufförerna behöver bli bättre på skrapa av is och snö från huvudstrålkastare och baklyktor. Avisningstiden för Scanias H7 huvudstrålkastare är 20 min för halogen versionen och 35 min för xenon versionen vid -18 °C. Detta kan jämföras med att BMW:s LED-huvudstrålkastare behöver 65 min för att avisas. LED-huvudstrålkastare är troligtvis begränsade till en avis-ningstid kring 60 min om inte någon extra värme tillförs. Den snabbaste metoden för att avisa en huvudstrålkastare är att använda varm spolarvätska men elektrotermisk avisning kan också vara mycket effektivt. Den föreslagna testmetoden är ett enkelt sätt att jämföra och utvärdera olika huvudstrålkastare och baklyktor. Det som är unikt med testmetoden är hur isskiktet på lamporna bildas. Isskiktet som skapas är extremt jämt och lätt att utvärdera.