Thesis (MEng) -- Stellenbosch University, 2014. / ENGLISH ABSTRACT: Solar energy is a time dependent, high-temperature radiant energy resource. The utility of a solar thermal energy system increases if the hot temperature source is available when it is needed most. This is realized by the thermal storage of the solar energy. Thermal storage gives greater versatility to a solar energy system by decoupling the heat source from the heat sink. A large quantity of energy may be stored during the melting process in a phase change material (PCM) within a small temperature range. This molten PCM can then deliver its absorbed heat at a constant temperature in a heating application. In this study a phase change storage system (PCS) is developed and proposed for a solar water heating application. This PCS system stores more heat per unit mass than would be possible with water across the same temperature range. The heat transfer rate in and out of many PCMs is slow because of the low thermal conductivity of the PCM. However, heat transfer enhancers (HTE), such as heat pipes and fins may be added to enhance heat absorption and heat removal rates. Heat pipes have the inherent capability to transfer heat at high rates across large distances, even where the temperature difference is small. In this thesis a description is given of a PCS system consisting of paraffin wax as the PCM and which uses rectangular heat pipes in conjunction with aluminium fins to enhance heat transfer. The storage design is modular and each module has the characteristic that enhanced heat transfer in and out of the PCM is possible when the module is heated or cooled. It also has the capability to quickly absorb or alternatively to supply heat at a nearly constant temperature during the phase change of the module. A rectangular module was designed and built. The module was then analysed under controlled heat absorption and heat removal cycles. The heat up experiment involved an electrical kettle as the hot temperature source. The heat sink was a mains water heat exchanger. The experimental results were compared to those of a transient numerical model, which calculates theoretically how the module will perform thermally under the given test conditions. The numerical model of the experimental set-up was validated when it was found that the numerical model results resemble the experimental results. The numerical model was then adapted to simulate a novel solar water heater (SWH) with an additional PCS container. The improvement over previous designs is that the additional storage container can be heated to a higher temperature than the allowable geyser temperature. The system also heats up and cools down at a faster rate than would be possible without the HTEs. From the numerical simulation the size and performance of such a system is determined. This numerical analysis indicated that a phase change storage system in a SWH application will increase the hot water delivered by a given solar collector and geyser by increasing the storage capacity and by heating up the geyser overnight for early morning hot water use. / AFRIKKANSE OPSOMMING: Son energie is ‘n tyd afhanklike, hoë temperatuur radiasie energiebron. Die bruikbaarheid van ‘n sontermiese energie sisteem verhoog indien die hoë temperatuur bron beskikbaar is wanneer dit die meeste benodig word. Dit kan verwesenlik word deur die sonenergie termies te stoor. Termiese storing bied groter veelsydigheid aan ‘n sontermiese stelsel deur effektief die hittebron te ontkoppel van die hitte sink. ‘n Groot hoeveelheid energie kan, gedurende die smeltingsproses in ‘n faseveranderingsmateriaal binne ‘n nou temperatuurband gestoor word. Hierdie gesmelte materiaal kan weer op sy beurt in die waterverhittingstoepassing, die geabsorbeerde hitte teen ‘n konstante temperatuur oordra. In hierdie studie word ‘n sonwaterverwarmer stelsel wat aangepas is deur ‘n addisionele latente hittestoor daaraan te heg, voorgestel. Hierdie faseverandering hittestoor kan meer hitte stoor as wat water in dieselfde temperatuur band sou kon. Die hitteoordrag tempo na en van baie van die faseveranderingsmateriale (FVM) is egter as gevolg van die lae termiese geleidingskoëfisient, stadig. Hierdie eienskap kan gelukkig verbeter word deur hittepype en hitteoordrag verhogings materiaal soos vinne by te voeg. Hittepype het die inherente eienskap om hitte teen ‘n hoë tempo oor groot afstande, oor te dra, selfs oor ‘n klein temperatuurverskil. In hierdie tesis word ‘n ondersoek rakende ‘n faseverandering storingsisteem wat bestaan uit paraffien was as die FVM en reghoekige hittepype wat te same met met aluminium finne gebruik word om die hitteoordragtempo te verhoog, beskryf. Die stoorontwerp is modulêr en elke module het die kenmerk van hoë hitteoordrag na en van die FVM. Die module het verder ook die eienskap om vining hitte te absorbeer of hitte af te gee. Dit gebeur teen ‘n konstante temperatuur gedurende die faseverandering van die FVM. Presies so ‘n reghoekige module is ontwerp en gebou en onder beheerde hitte absorbering- en hitte verwyderingsiklusse analiseer. Tydens die verhittings eksperiment is ‘n elektriese ketel van gebruik gemaak wat gedien het as die hoë temperatuur bron. Die hitte sink was ‘n hitteruiler wat kraanwater van ‘n konstante hoogte tenk ontvang het. Die resultate van die volledige toets is met die resultate van tydafhanklike numeriese model vergelyk. Hierdie numeriese model bereken teoreties wat die module se storing verrigting onder gegewe toets omstandighede sal wees. Die numeriese model se resultate het goed vergelyk met die resultate van die eksperimente. Die numeriese model van die module is toe aangepas om ‘n sonwaterverwarmer met addisionele stoortenk wat fase verandering materiaal gebruik, te simuleer. Hierdie ontwerp is anders as vorige ontwerpe in die sin dat hoër temperature as wat die warmwatertoestel kan hanteer, in die faseverandering storingstenk, bereik kan word. Die sisteem kan ook as gevolg van die hitteoordrag verhoging materiaal, vinniger verhit of afkoel en teen ‘n vinniger tempo. Die simulasie van die sonwaterverwarmer met FVM word gebruik om die grootte en verrigting van die sisteem te bepaal. Hierdie numeriese model toon aan dat wanneer ‘n addisionele faseverandering storingstelsel in ‘n sonwaterverwarmer toepassing gebruik word, die warm water wat die verbruiker uit die sisteem kan verkry, kan verhoog. Die rede hiervoor is dat meer hitte gestoor kan word, wat beskikbaar gemaak word aan die warm water tenk.

No description available.

by Chung-Wing Ng. / Thesis (M.Phil.)--Chinese University of Hong Kong, 2002. / Includes bibliographical references (leaves 100-107). / Abstracts in English and Chinese. / Abstract --- p.ii / Acknowledgment --- p.vi / Table of Contents --- p.vii / List of Tables --- p.x / List of Figures --- p.xi / Chapter Chapter 1 --- Introduction --- p.1 / Chapter 1.1 --- Image-based Video Description --- p.2 / Chapter 1.2 --- Video Summary --- p.5 / Chapter 1.3 --- Video Matching --- p.6 / Chapter 1.4 --- Contributions --- p.7 / Chapter 1.5 --- Outline of Thesis --- p.8 / Chapter Chapter 2 --- Literature Review --- p.10 / Chapter 2.1 --- Video Retrieval in Digital Video Libraries --- p.11 / Chapter 2.1.1 --- The VISION Project --- p.11 / Chapter 2.1.2 --- The INFORMEDIA Project --- p.12 / Chapter 2.1.3 --- Discussion --- p.13 / Chapter 2.2 --- Video Structuring --- p.14 / Chapter 2.2.1 --- Video Segmentation --- p.16 / Chapter 2.2.2 --- Color histogram Extraction --- p.17 / Chapter 2.2.3 --- Further Structuring --- p.18 / Chapter 2.3 --- XML Technologies --- p.19 / Chapter 2.3.1 --- XML Syntax --- p.20 / Chapter 2.3.2 --- "Document Type Definition, DTD" --- p.21 / Chapter 2.3.3 --- "Extensible Stylesheet Language, XSL" --- p.21 / Chapter 2.4 --- SMIL Technology --- p.22 / Chapter 2.4.1 --- SMIL Syntax --- p.23 / Chapter 2.4.2 --- Model of SMIL Applications --- p.23 / Chapter Chapter 3 --- Overview of ADVISE --- p.25 / Chapter 3.1 --- Objectives --- p.26 / Chapter 3.2 --- System Architecture --- p.26 / Chapter 3.2.1 --- Video Preprocessing Module --- p.26 / Chapter 3.2.2 --- Web-based Video Retrieval Module --- p.30 / Chapter 3.2.3 --- Video Streaming Server --- p.34 / Chapter 3.3 --- Summary --- p.35 / Chapter Chapter 4 --- Construction of Video Table-of-Contents (V-ToC) --- p.36 / Chapter 4.1 --- Video Structuring --- p.37 / Chapter 4.1.1 --- Terms and Definitions --- p.37 / Chapter 4.1.2 --- Regional Color Histograms --- p.39 / Chapter 4.1.3 --- Video Shot Boundaries Detection --- p.43 / Chapter 4.1.4 --- Video Groups Formation --- p.47 / Chapter 4.1.5 --- Video Scenes Formation --- p.50 / Chapter 4.2 --- Storage and Presentation --- p.53 / Chapter 4.2.1 --- Definition of XML Video Structure --- p.54 / Chapter 4.2.2 --- V-ToC Presentation Using XSL --- p.55 / Chapter 4.3 --- Evaluation of Video Structure --- p.58 / Chapter Chapter 5 --- Video Summarization --- p.62 / Chapter 5.1 --- Terms and Definitions --- p.64 / Chapter 5.2 --- Video Features Used for Summarization --- p.65 / Chapter 5.3 --- Video Summarization Algorithm --- p.67 / Chapter 5.3.1 --- Combining Extracted Video Segments --- p.68 / Chapter 5.3.2 --- Scoring the Extracted Video Segments --- p.69 / Chapter 5.3.3 --- Selecting Extracted Video Segments --- p.70 / Chapter 5.3.4 --- Refining the Selection Result --- p.71 / Chapter 5.4 --- Video Summary in SMIL --- p.74 / Chapter 5.5 --- Evaluations --- p.76 / Chapter 5.5.1 --- Experiment 1: Percentages of Features Extracted --- p.76 / Chapter 5.5.2 --- Experiment 2: Evaluation of the Refinement Process --- p.78 / Chapter Chapter 6 --- Video Matching Using V-ToC --- p.80 / Chapter 6.1 --- Terms and Definitions --- p.81 / Chapter 6.2 --- Video Features Used for Matching --- p.82 / Chapter 6.3 --- Non-ordered Tree Matching Algorithm --- p.83 / Chapter 6.4 --- Ordered Tree Matching Algorithms --- p.87 / Chapter 6.5 --- Evaluation of Video Matching --- p.91 / Chapter 6.5.1 --- Applying Non-ordered Tree Matching --- p.92 / Chapter 6.5.2 --- Applying Ordered Tree Matching --- p.94 / Chapter Chapter 7 --- Conclusion --- p.96 / Bibliography --- p.100

More and more modern computer applications, from business decision support to scientific data analysis, utilize visualization techniques to support exploratory activities. Various tools have been proposed in the past decade to help users better interpret data using such display techniques. However, most do not scale well with regard to the size of the dataset upon which they operate. In particular, the level of cluttering on the screen is typically unacceptable and the performance is poor. To solve the problem of cluttering at the interface level, visualization tools have recently been extended to support hierarchical views of the data, with support for focusing and drilling-down using interactive brushes. To solve the scalability problem, we now investigate how best to couple such a visualization tool with a database management system without losing the real-time characteristics. This integration must be done carefully, since visual user interactions implemented as main memory operations do not map directly into efficient database operations. The main efficiency issue when doing this integration is to avoid the recursive processing required for hierarchical data retrieval. For this problem, we have develop a tree labeling method, called MinMax tree, that allows the movement of the on-line recursive processing into an off-line precomputation step. Thus, at run time, the recursive processing operations translate into linear cost range queries. Secondly, we employ a main memory access strategy to support incremental loading of data into the main memory. The techniques have been incorporated into XmdvTool, a multidimensional visual exploration tool, in order to achieve scalability. The tool now successfully scales up to datasets of the order 10^5-10^7 records. Lastly, we report experimental results that illustrate the impact of the proposed techniques on the system's overall performance.

Due to the wide acceptance of the Word Wide Web Consortium (W3C) XPath language specification, native indexing for XML is needed to support path expression queries efficiently. XPath describes the different document tree relationships that may be queried as a set of axes. Many recent proposals for XML indexing focus on accelerating only a small subset of expressions possible using these axes. In particular, queries by ordinal position and updates that alter document structure are not well supported. A more general indexing solution is needed that not only offers efficient evaluation of all of the XPath axes, but also allows for efficient document update. We introduce MASS, a Multiple Axis Storage Structure, to meet the performance challenge posed by the XPath language. MASS is a storage and indexing solution for large XML documents that eliminates the need for external secondary storage. It is designed around the XPath language, providing efficient interfaces for evaluating all XPath axes. The clustered organization of MASS allows several different axes to be evaluated using the same index structure. The clustering, in conjunction with an internal compression mechanism exploiting specific XML characteristics, keep the size of the structure small which further aids efficiency. MASS introduces a versatile scheme for representing document node relationships that always allows for efficient updates. Finally, the integration of a ranked B+ tree allows MASS to efficiently evaluate XPath axes in large documents. We have implemented MASS in C++ and measured the performance of many different XPath expressions and document updates. Our experimental evaluation illustrates that MASS exhibits excellent performance characteristics for both queries and updates and scales well to large documents, making it a practical solution for XML storage. In conjunction with text indexing, MASS provides a complete solution from XML indexing.

We have conducted a performance analysis of a large scale multiprocessor system based on shared buses organized in a hierarchical fashion and employing an easy to implement snoopy cache protocol. · This arrangement, named TREEBUS [ 5], presents a logical extension path for multiprocessor systems based on a single shared bus whose scalability is limited by the available system bus bandwidth [26]. The multiple, independent, hierarchical buses overcome the bus bandwidth limitation and the architecture can scale to relatively large sizes. We have developed an easy to use, reasonably accurate and computationally efficient analytic model for analyzing the performance of the memory hierarchy. Our analysis presents a balanced view by incorporating cost and size of the memory subsystem, two parameters which can significantly impact the feasibility of this architecture. The results indicate that the TREEBUS can deliver high performance for a maximum of about 512 processors using available technology. For larger sizes, the problem is not the limited system bus bandwidth but the unmanageable size of the main memory and a deteriorating cost/performance ratio.

To regain operation of a Minuteman Missile guidance computer, a ferromagnetic film was sprayed onto a previously inoperable memory disk after the original coating was removed using paint remover. The coating was then polished down to provide a smooth and uniform film, 1'he permanent data required for the clock and sector channels was determined from an operable Minuteman computer. 1-his information was then recorded on the memory disk using the write heads which were part of the complete memory unit. Digital electronics using integrated circuits provided theand generated the recording data _or the memory write heads. A "memory check" program verified the uniformity of the repaired memory by alternately writing "0' s" and "1' s" on each bit location and then reading and comparing the numbers to "0's" and "l's".Ball State UniversityMuncie, IN 47306

Thesis (Ph. D.)--University of California, Riverside, 2009. / Includes abstract. Title from first page of PDF file (viewed March 12, 2010). Available via ProQuest Digital Dissertations. Includes bibliographical references (p. 151-158). Also issued in print.

The main objective of this research is to provide an efficient and reliable method for using multi-level cell (MLC) phase-change memory (PCM) as a main memory. As DRAM scaling approaches the physical limit, alternative memory technologies are being explored for future computing systems. Among them, PCM is the most mature with announced commercial products for NOR flash replacement. Its fast access latency and scalability have led researchers to investigate PCM as a feasible candidate for DRAM replacement. Moreover, the multi-level potential of PCM cells can enhance the scalability by increasing the number of bits stored in a cell. However, the two major challenges for adopting MLC PCM are the limited write endurance cycle and the resistance drift issue. To alleviate the negative impact of the limited write endurance cycle, this thesis first introduces a secure wear-leveling scheme called Security Refresh. In the study, this thesis argues that a PCM design not only has to consider normal wear-out under normal application behavior, most importantly, it must take the worst-case scenario into account with the presence of malicious exploits and a compromised OS to address the durability and security issues simultaneously. Security Refresh can avoid information leak by constantly migrating their physical locations inside the PCM, obfuscating the actual data placement from users and system software. In addition to the secure wear-leveling scheme, this thesis also proposes SAFER, a hardware-efficient multi-bit stuck-at-fault error recovery scheme which can function in conjunction with existing wear-leveling techniques. The limited write endurance leads to wear-out related permanent failures, and furthermore, technology scaling increases the variation in cell lifetime resulting in early failures of many cells. SAFER exploits the key attribute that a failed cell with a stuck-at value is still readable, making it possible to continue to use the failed cell to store data; thereby reducing the hardware overhead for error recovery. Another approach that this thesis proposes to address the lower write endurance is a hybrid phase-change memory architecture that can dynamically classify, detect, and isolate frequent writes from accessing the phase-change memory. This proposed architecture employs a small SRAM-based Isolation Cache with a detection mechanism based on a multi-dimensional Bloom filter and a binary classifier. The techniques are orthogonal to and can be combined with other wear-out management schemes to obtain a synergistic result. Lastly, this thesis quantitatively studies the current art for MLC PCM in dealing with the resistance drift problem and shows that the previous techniques such as scrubbing or error correction schemes are incapable of providing sufficient level of reliability. Then, this thesis proposes tri-level-cell (3LC) PCM and demonstrates that 3LC PCM can be a viable solution to achieve the soft error rate of DRAM and the performance of single-level-cell PCM.

The current trend of ever larger clusters and data centers has coincided with a dramatic increase in the cost and power of these installations. While many efficiency improvements have focused on processor power and cooling costs, reducing the cost and power consumption of high-performance memory has mostly been overlooked. This thesis proposes a new address translation model called Dynamic Partitioned Global Address Space (DPGAS) that extends the ideas of NUMA and software-based approaches to create a high-performance hardware model that can be used to reduce the overall cost and power of memory in larger server installations. A memory model and hardware implementation of DPGAS is developed, and simulations of memory-intensive workloads are used to show potential cost and power reductions when DPGAS is integrated into a server environment.