Nucleic acid amplification is responsible for pushing the limit-of-detection of molecular diagnostic assays to unprecedented levels. We developed an assay based on protein-responsive programmable dynamic DNA assembly (PRPDA) to detect proteins via an intermediate process involving nucleic acids for taking advantage of nucleic acid amplification strategies. PRPDA has previously been designed for sensitive protein analysis in fluorescent assay formats. To further push the detection limit and to achieve assay miniaturization and multiplexing, we sought to combine PRPDA with electrochemical readout. We were able to achieve LOD of 1 pM by employing wrinkled gold electrode for the PRDA protein detection scheme. Which is 2800 times improvement compare to the 2.8 nM demonstrated by fluorescent transduction. / Thesis / Master of Applied Science (MASc)

DNA polymerases play a fundamental role in the transmission and maintenance of genetic information and have become an important in vitro diagnostic and analytical tool. The Loop-mediated isothermal DNA amplification (LAMP) method has major applications for disease and pathogen detection and utilises the unique strand-displacement activity of a small group of thermostable DNA polymerases. The Large (Klenow-like) Fragment of Geobacillus stearothermophilus DNA polymerase I (B.st LF Pol I) currently serves as the enzyme of choice for the majority of these isothermal reactions, with few alternatives commercially available. An increasing need for point-of-care nucleic acid diagnostics is now shifting detection methods away from traditional laboratory based chemistries, such as the polymerase chain reaction (PCR), in favour of faster, and often simpler, isothermal methods. It was recognised that in order to facilitate these rapid isothermal reactions there was a requirement for alternative thermostable, strand-displacing DNA polymerases and this was the basis of this thesis. This thesis reports the successful identification of polymerases from Family A, chosen for their inherent strand-displacement activity, which is essential for the removal of RNA primers of Okazaki fragments during lagging-strand DNA synthesis in vivo. Twelve thermophilic organisms, with growth temperature ranges between 50oC and 80oC, were identified and the genomic DNA extracted. Where DNA sequences were unavailable, a gene-walking technique revealed the polA sequences, enabling the Large Fragment Pol I to be cloned and the recombinant protein over-expressed in Escherichia coli. A three-stage column chromatography purification permitted the characterisation of ten newly identified Pol I enzymes suitable for use in LAMP. Thermodesulfatator indicus (T.in) Pol I proved to be the most interesting enzyme isolated. Demonstrating strong strand-displacement activity and thermostability to 98oC, T.in Pol I is uniquely suitable to a newly termed heat-denaturing LAMP (HD-LAMP) reaction offering many potential advantages over the existing LAMP protocol. The current understanding of strand-displacement activity of Pol I is poorly understood. This thesis recognised the need to identify the exact regions and motifs responsible for this activity of the enzyme, enabling potential enhancements to be made. Enzyme engineering using site-directed mutagenesis and the formation of chimeras confirmed the importance of specific subdomains in strand-separation activity. With this knowledge, a unique Thermus aquaticus (T.aq) Pol I mutant demonstrated sufficient strand-displacement activity to permit its use in LAMP for the first time. The fusion of Cren7, a double-stranded DNA binding protein, to Pol I for use in LAMP is also reported. Although the fusion construct was found to reduce amplification speed, enhancements were observed in the presence of increased salt concentrations and it is suggested here as a means for future enzyme development.

<p>Nucleic Acid hairpins have been a subject of study for the last four decades. They are composed of single strand that is </p><p>hybridized to itself, and the central section forming an unhybridized loop. In nature, they stabilize single stranded RNA, serve as nucleation</p><p>sites for RNA folding, protein recognition signals, mRNA localization and regulation of mRNA degradation. On the other hand, </p><p>DNA hairpins in biological contexts have been studied with respect to forming cruciform structures that can regulate gene expression.</p><p>The use of DNA hairpins as fuel for synthetic molecular devices, including locomotion, was proposed and experimental demonstrated in 2003. They</p><p>were interesting because they bring to the table an on-demand energy/information supply mechanism. </p><p>The energy/information is hidden (from hybridization) in the hairpin’s loop, until required.</p><p>The energy/information is harnessed by opening the stem region, and exposing the single stranded loop section.</p><p>The loop region is now free for possible hybridization and help move the system into a thermodynamically favourable state.</p><p>The hidden energy and information coupled with </p><p>programmability provides another functionality, of selectively choosing what reactions to hide and </p><p>what reactions to allow to proceed, that helps develop a topological sequence of events. </p><p>Hairpins have been utilized as a source of fuel for many different DNA devices. In this thesis, we program four different </p><p>molecular devices using DNA hairpins, and experimentally validate them in the</p><p>laboratory. 1) The first device: A </p><p>novel enzyme-free autocatalytic self-replicating system composed entirely of DNA that operates isothermally. 2) The second</p><p>device: Time-Responsive Circuits using DNA have two properties: a) asynchronous: the final output is always correct </p><p>regardless of differences in the arrival time of different inputs.</p><p>b) renewable circuits which can be used multiple times without major degradation of the gate motifs </p><p>(so if the inputs change over time, the DNA-based circuit can re-compute the output correctly based on the new inputs).</p><p>3) The third device: Activatable tiles are a theoretical extension to the Tile assembly model that enhances </p><p>its robustness by protecting the sticky sides of tiles until a tile is partially incorporated into a growing assembly. </p><p>4) The fourth device: Controlled Amplification of DNA catalytic system: a device such that the amplification</p><p>of the system does not run uncontrollably until the system runs out of fuel, but instead achieves a finite</p><p>amount of gain.</p><p>Nucleic acid circuits with the ability </p><p>to perform complex logic operations have many potential practical applications, for example the ability to achieve point of care diagnostics.</p><p>We discuss the designs of our DNA Hairpin molecular devices, the results we have obtained, and the challenges we have overcome</p><p>to make these truly functional.</p> / Dissertation

DNA provides an ideal substrate for nanoscale construction and programmable dynamic mechanisms. DNA mechanisms can be used to produce DNA motors which do mechanical work, e.g. transportation of a substrate along a track. I explore a method for control of a DNA mechanism ubiquitous in DNA motor designs, toehold-mediated strand displacement, by which one strand in a duplex can be swapped for another. My method uses a mismatch between a pair of nucleotides in the duplex, which is repaired by displacement. I find that displacement rate can be fine-tuned by adjusting the position of the mismatch in the duplex, enabling the design of complex kinetic behaviours. A bipedal motor [1, 2] is designed to walk along a single-stranded DNA track. Previously the motor has only taken a single step, due to a lack of designs to extend the single-stranded track. I present a novel design for track held under tension using a 3D DNA origami tightrope, and verify its assembly. The bipedal motor design is adapted and a method to specifically place motors on tightropes is demonstrated. Motor operation is investigated on truncated tracks and tightrope tracks by electrophoresis and spectrofluorometry. The motor does not accumulate appreciably at the track end; this is tentatively attributed to rearrangement of the motor between track sites without interaction with fuel. Tightrope origami can hold single-stranded DNA under pN tension. I use tightropes to study hybridization kinetics under tension and find dramatic, non-monotonic changes in hybridization rate constants and dissociation constants with tension in the range &Tilde;0-15 pN. Extended tracks for a 'burnt-bridges' motor which destroys its track as it moves [3] are created on the inside of DNA nanotubes, which can be polymerised to create tracks up to a few mm in length, and on tiles which I attempt to join in a specific order. Crossing of the motor between tubes is verified, and microscopy experiments provide some evidence that track is being cleaved by the motor, a requirement for movement along the track. Tile based tracks are imaged by super-resolution DNA PAINT [4], providing proof-of-principle for track observation to infer motor movement.

<p>Self-assembly is a pervasive natural phenomenon that gives rise to complex structures and functions. It describes processes in which a disordered system of components form organized structures as a consequence of specific, local interactions among the components themselves, without any external direction. Biological self-assembled systems, evolved over billions of years, are more intricate, more energy efficient and more functional than anything researchers have currently achieved at the nanoscale. A challenge for human designed physical self-assembled systems is to catch up with mother nature. I argue through examples that DNA is an apt material to meet this challenge. This work presents:</p><p>1. 3D self-assembled DNA nanostructures.</p><p>2. Illustrations of the simplicity and power of toehold-mediated strand displacement interactions.</p><p>3. Algorithmic constructs in the tile assembly model.</p> / Dissertation

Dynamic DNA complexes are able to undergo multiple hybridization and dissociation events through a process called strand displacement. This unique property has facilitated the creation of programmable molecular detection systems and chemical logic gates encoded by nucleotide sequence. This work examines whether the ability to selective exchange oligonucleotides among different thermodynamically-stable DNA complexes can be harnessed to create a new class of imaging probes that permit fluorescent reporters to be sequentially activated (“turned on”) and erased (“turned off”). Here, dynamic DNA complexes detect a specific DNA-conjugated antibody and undergo strand displacement to liberate a quencher strand and activate a fluorescent reporter. Subsequently, incubation with an erasing complex allows the fluorophore to be stripped from the target strand, quenched, and washed away. This simple capability therefore allows the same fluorescent dyes to be used multiple times to detect different markers within the same sample via sequential rounds of fluorescence imaging. We evaluated and optimized several DNA complex designs to function efficiently for in situ molecular analyses. We also applied our DNA probes to immunofluorescence imaging using DNA-conjugated antibodies and demonstrated the ability to at least double the number of detectable markers on a single sample. Finally, the probe complexes were reconfigured to act as AND-gates for the detection of co-localized proteins. Given the ability to visualize large numbers of cellular markers using dynamic DNA probe complexes, high-content proteomic analyses can be performed on a single sample, enhancing the power of fluorescence imaging techniques. Furthermore, dynamic DNA complexes offer new avenues to incorporate DNA-based computations and logic for in situ molecular imaging and analyses.

The uniquely predictable and controllable binding mechanism of DNA strands has been exploited to construct a vast range of synthetic nanodevices, capable of autonomous motion and computation. This thesis proposes novel ideas for the control and observation of such devices. The first of these proposals hinges on introducing mismatched base pairs into toehold-mediated strand displacement – a fundamental primitive in most dynamic DNA devices and reaction networks. Previous findings that such mismatches can impede strand displacement are extended insofar as it is shown that this impediment is highly dependent on mismatch position. This discovery is examined in detail, both experimentally and through simulations created with a coarse-grained model of DNA. It is shown that this effect allows for kinetic control of strand displacement decoupled from reaction thermodynamics. The second proposal improves upon a previously presented strand displacement scheme, in which two strands perform displacement cooperatively. This scheme is extended to be cascadable, so that the output of one such reaction serves as input to the next. This scheme is implemented in reaction networks capable of performing fundamental calculations on directed graphs. The third proposal is exclusively concerned with a novel observation methodology. This method is based on single-molecule fluorescence microscopy, and uses quantum dots, a fluorescent type of semiconductor nanocrystal, as a label. These quantum dots display a set of characteristics particularly promising for single-molecule studies on the time- and length scales most commonly encountered in DNA nanotechnology. This method is shown to allow for highly precise measurements on static DNA devices. Preliminary data for the observation of a complex dynamic device is also presented.

DNA polymerase epsilon (Pol ε) is a multi-subunit B-family DNA polymerase that is involved in leading strand DNA replication in eukaryotes. DNA Pol ε in yeast consists of four subunits, Pol2, Dpb2, Dpb3, and Dpb4. Pol2 is the catalytic subunit and Dpb2, Dpb3, and Dpb4 are the accessory subunits. Pol2 can be further divided into an N-terminal catalytic core (Pol2core) containing both the polymerase and exonuclease active sites and a C-terminus domain. We determined the X-ray crystal structure of Pol2core at 2.2 Å bound to DNA and with an incoming dATP. Pol ε has typical fingers, palm, thumb, exonuclease, and N-terminal domains in common with all other B-family DNA polymerases. However, we also identified a seemingly novel domain we named the P-domain that only appears to be present in Pol ε. This domain partially encircles the nascent duplex DNA as it leaves the active site and contributes to the high intrinsic processivity of Pol ε. To ask if the crystal structure of Pol2core can serve as a model for catalysis by Pol ε, we investigated how the C-terminus of Pol2 and the accessory subunits of Pol ε influence the enzymatic mechanism by which Pol ε builds new DNA efficiently and with high fidelity. Pre-steady state kinetics revealed that the exonuclease and polymerization rates were comparable between Pol2core and Pol ε. However, a global fit of the data over five nucleotide-incorporation events revealed that Pol ε is slightly more processive than Pol2 core. The largest differences were observed when measuring the time for loading the polymerase onto a 3' primer-terminus and the subsequent incorporation of one nucleotide. We found that Pol ε needed less than a second to incorporate the first nucleotide, but it took several seconds for Pol2core to incorporate similar amounts of the first nucleotide. B-family polymerases have evolved an extended β-hairpin loop that is important for switching the primer terminus between the polymerase and exonuclease active sites. The high-resolution structure of Pol2core revealed that Pol ε does not possess an extended β-hairpin loop. Here, we show that Pol ε can processively transfer a mismatched 3' primer-terminus between the polymerase and exonuclease active sites despite the absence of a β-hairpin loop. Additionally we have characterized a series of amino acid substitutions in Pol ε that lead to altered partitioning of the 3'primer-terminus between the two active sites. In a final set of experiments, we investigated the ability of Pol ε to displace the downstream double-stranded DNA while carrying out DNA synthesis. Pol ε displaced only one base pair when encountering double-stranded DNA after filling a gap or a nick. However, exonuclease deficient Pol ε carries out robust strand displacement synthesis and can reach the end of the templates tested here. Similarly, an abasic site or a ribonucleotide on the 5'-end of the downstream primer was efficiently displaced but still only by one nucleotide. However, a flap on the 5'-end of the blocking primer resembling a D-loop inhibited Pol ε before it could reach the double-stranded junction. Our results are in agreement with the possible involvement of Pol ε in short-patch base excision repair and ribonucleotide excision repair but not in D-loop extension or long-patch base excision repair.

Secondary structure dynamics of biopolymers play a vital role in many of the complex processes within a cell. However, due to the substantial number of atoms in the involved biopolymers along with the multitude of interactions that occur between the molecules, understanding these processes in detail is challenging and often involves computationally demanding simulations. In this thesis, the secondary structure dynamics of three different biopolymer systems were modeled using a single approach, which is based on intuitive principles that facilitate the interpretation. To this end, the kinetic behavior of each system was experimentally determined, and described by simplified reaction schemes, which were then connected to Markov chain models encompassing all principal secondary structural conformations. Firstly, we investigated the toehold-mediated strand displacement reaction, which is widely applied in nanotechnology to create DNA-based nano-devices and biochemical reaction networks. Our model correctly described the impact of base pair mismatches on the kinetics of these reactions, as measured by bulk fluorescence experiments. Additionally, it revealed that incumbent dissociation, base pair fraying, and internal loop formation are important processes during strand displacement. Furthermore, we established two dissipative elements to enhance temporal control over toehold-mediated strand displacement reactions. The first element allowed a reversible and repeatable incumbent strand release, whereas the second element provided the possibility to start the displacement reaction after a programmable temporal delay. Secondly, we studied the target recognition by the CRISPR-Cas effector complex Cascade, a highly promising protein for applications in genome engineering. Our model successfully reproduced all aspects of the torque- and mismatch-dependent R-loop formation time by Cascade obtained by single-molecule torque and bulk fluorescence measurements. Furthermore, we demonstrated that the seed effect observed for Cascade results from DNA supercoiling, rather than a structural property of the protein complex. Lastly, we explored the folding/unfolding of α-helices, which plays a critical role in the folding and function of proteins. Our model accurately described α-helix unfolding kinetics obtained by fast triplet-triplet energy transfer. Moreover, we showed that the complex α-helix unfolding does not follow a simple Einstein-type diffusion but is a combination of the sub-diffusive boundary diffusion and the rather peptide-length-independent coil nucleation. The presented models enabled access to the diverse timescales of the characterized processes, which are generally difficult to access experimentally, despite utilizing just a single approach. In particular, we obtained: tens of microseconds for the branch migration step time of the toehold-mediated strand displacement, hundreds of microseconds for the R-loop formation steps by Cascade, and tens of nanoseconds for folding or unfolding of an α-helix by a single residue. Given the simplicity and accessibility of the established models, we are confident that they will become useful tools for researchers to analyze the dynamics of biomolecules, and anticipate that similar modeling approaches can be applied to other biopolymer systems, being well-described by probabilistic models. / Die Sekundärstrukturdynamik von Biopolymeren spielt eine entscheidende Rolle bei vielen komplexen Prozessen innerhalb einer Zelle. Aufgrund der beträchtlichen Anzahl von Atomen in den beteiligten Biopolymeren und der Vielzahl an Wechselwirkungen zwischen den Molekülen ist es jedoch eine Herausforderung diese Prozesse im Detail zu verstehen, und erfordert oft rechenintensive Simulationen. In dieser Arbeit wurde die Sekundärstrukturdynamik von drei verschiedenen Biopolymersystemen mit einem einzigen Ansatz modelliert, welcher auf intuitiven Prinzipien beruht und somit eine erleichterte Interpretation der Ergebnisse ermöglicht. Hierzu wurde das kinetische Verhalten jedes Systems experimentell bestimmt und durch vereinfachte Reaktionsschemata beschrieben. Diese wurden anschließend mit Markov-Kettenmodellen verknüpft, welche alle wichtigen Konformationen der Sekundärstruktur abbilden. Als erstes System untersuchten wir die DNA Strangaustauschreaktion, welche in der Nanotechnologie häufig zur Herstellung von DNA-basierten Nanomaschinen und biochemischen Reaktionsnetzwerken eingesetzt wird. Unser Modell beschrieb die durch Ensemble-Fluoreszenz-Experimente gemessenen Auswirkungen von Basenfehlpaarungen auf die Kinetik dieser Reaktionen korrekt. Des Weiteren zeigte sich, dass die vorzeitige Strangablösung, das Ausfransen von Basenpaaren und die Bildung interner Schleifen wichtige Prozesse während des Strangaustausches sind. Darüber hinaus konnten wir zwei dissipative Elemente etablieren, um die zeitliche Kontrolle über die Strangaustauschreaktionen zu verbessern. Das erste Element ermöglicht eine reversible und wiederholbare Strangablösung, während das zweite Element die Möglichkeit bietet die Strangaustauschreaktionen nach einer programmierbaren zeitlichen Verzögerung zu starten. Zweitens untersuchten wir den Zielerkennungsprozess durch den CRISPR-Cas Komplex Cascade, ein vielversprechendes Protein für Anwendungen in der Genomtechnologie. Unser Modell reproduzierte erfolgreich alle Aspekte der torsions- und fehlpaarungs-abhängigen R-Schleifenbildung durch Cascade, welche durch Einzelmolekül-Torsions- und Ensemble-Fluoreszenz-Messungen ermittelt wurden. Zusätzlich konnten wir nachweisen, dass der für Cascade beobachtete „seed“-Effekt auf DNA-Verdrehung und nicht auf eine strukturelle Eigenschaft des Proteinkomplexes zurückzuführen ist. Schließlich untersuchten wir die Faltung/Entfaltung von α-Helices, welche eine entscheidende Rolle bei der Faltung und Funktion von Proteinen spielen. Unser Modell beschrieb die durch schnelle Triplett-Triplett-Energietransfer Experimente ermittelte α-Helix-Entfaltungskinetik exakt. Darüber hinaus konnten wir zeigen, dass die komplexe α-Helix-Entfaltung nicht einer einfachen Diffusion vom Einstein-Typ folgt, sondern eine Kombination aus subdiffusiver Grenzdiffusion und der eher peptidlängenunabhängigen Coil-Nukleation ist. Obwohl nur ein einziger Ansatz verwendet wurde, ermöglichten die vorgestellten Modelle den Zugang zu den vielschichtigen Zeitskalen der charakterisierten Prozesse, welche im Allgemeinen experimentell schwer zugänglich sind. Insbesondere konnten die folgenden zeitlichen Bereiche bestimmt werden: Dutzende von Mikrosekunden für die Schrittzeit der Strangaustauschreaktion, Hunderte von Mikrosekunden für die Schritte der R-Schleifenbildung durch Cascade, und Dutzende von Nanosekunden für die Faltung oder Entfaltung einer α-Helix um ein einzelnes Segment. Angesichts der Simplizität und Zugänglichkeit der etablierten Modelle sind wir zuversichtlich, dass sie zu nützlichen Werkzeugen für Forscher werden, um die Dynamik von Biomolekülen zu analysieren. Zusätzlich gehen wir davon aus, dass ähnliche Modellierungsansätze auf andere Biopolymersysteme angewendet werden können, sofern sie gut durch probabilistische Modelle beschrieben werden.

Protoplast fusion of Lolium perenne and Lotus corniculatus for gene introgression by Sanjeev V. Raikar Lolium perenne is one of the most important forage crops globally and in New Zealand. Lotus corniculatus is a dicotyledonous forage that contains valuable traits such as high levels of condensed tannins, increased digestibility, and high nitrogen fixing abilities. However, conventional breeding between these two forage crops is impossible due to their markedly different taxonomic origin. Protoplast fusion (somatic hybridisation) provides an opportunity for gene introgression between these two species. This thesis describes the somatic hybridisation, the regeneration and the molecular analysis of the putative somatic hybrid plants obtained between L. perenne and L. corniculatus. Callus and cell suspensions of different cultivars of L. perenne were established from immature embryos and plants were regenerated from the callus. Of the 10 cultivars screened, cultivars Bronsyn and Canon had the highest percentage of callus induction at 36% each on 5 mg/L 2,4-D. Removal of the palea and lemma which form the seed coat was found to increase callus induction ability of the embryos. Plant regeneration from the callus was achieved when the callus was plated on LS medium supplemented with plant growth regulators at different concentrations. Variable responses to shoot regeneration was observed between the different cultivars with the cv Kingston having the lowest frequency of shoot formation (12%). Different factors affecting the protoplast isolation of L. perenne were investigated. The highest protoplast yield of 10×106 g-1FW was obtained when cell suspensions were used as the tissue source, with enzyme combination ‘A’ (Cellulase Onozuka RS 2%, Macerozyme R-10 1%, Driselase 0.5%, Pectolyase 0.2%), for 6 h incubation period in 0.6 M mannitol. Development of microcolonies was only achieved when protoplasts were plated on nitrocellulose membrane with a L. perenne feeder layer on PEL medium. All the shoots regenerated from the protoplast-derived calli were albino shoots. The highest protoplast yield (7×106 g-1FW) of L. corniculatus was achieved from cotyledons also with enzyme combination ‘A’ (Cellulase Onozuka RS 2%, Macerozyme R-10 1%, Driselase 0.5%, Pectolyase 0.2%), for 6 h incubation period in 0.6 M mannitol. The highest plating efficiency for L. corniculatus of 1.57 % was achieved when protoplasts were plated on nitrocellulose membrane with a L. perenne feeder layer on PEL medium. The highest frequency of shoot regeneration (46%) was achieved when calli were plated on LS medium with NAA (0.1 mg/L) and BA (0.1 mg/L). Protoplast fusion between L. perenne and L. corniculatus was performed using the asymmetric somatic hybridisation technique using PEG as the fusogen. L. perenne protoplasts were treated with 0.1 mM IOA for 15 min and L. corniculatus protoplasts were treated with UV at 0.15 J/cm2 for 10 min. Various parameters affecting the fusion percentage were investigated. Successful fusions were obtained when the fusions were conducted on a plastic surface with 35% PEG (3350 MW) for 25 min duration, followed by 100 mM calcium chloride treatment for 25 min. A total of 14 putative fusion colonies were recovered. Shoots were regenerated from 8 fusion colonies. Unexpectedly, the regenerated putative hybrid plants resembled L. corniculatus plants. The flow cytometric profile of the putative somatic hybrids resembled that of L. corniculatus. Molecular analysis using SD-AFLP, SCARs and Lolium specific chloroplast microsatellite markers suggest that the putative somatic hybrids could be L. corniculatus escapes from the asymmetric protoplast fusion process. This thesis details a novel Whole Genome Amplification technique for plants using Strand Displacement Amplification technique.