Η παρούσα διατριβή εξειδίκευσης αποτελεί το προοίμιο μιας μακρόπνοης εμπλοκής του εργαστηρίου υλοποίησής της στη μελέτη ενδεχόμενης μετανάστευσης ουσιών που χρησιμοποιούνται ως ενισχυτικά φραγής ή/και ως χημικοί αισθητήρες σε βιοπολυμερικές συσκευασίες τροφίμων και αποδέσμευσής τους σε προσομοιωτές τροφίμων. Στο πλαίσιο αυτό, η εργασία αυτή αποτελεί μια προσπάθεια ανάδειξης της μεθόδου επιφανειακής ενίσχυσης της σκέδασης Raman (Surafce Enhanced Raman Scattering) ως κατάλληλης για τον ποσοτικό προσδιορισμό μικρού μοριακού βάρους ενώσεων που ενδεχομένως αποδεσμεύονται σε υδατικά διαλύματα ή/και συγκεκριμένους προσομοιωτές τροφίμων. Η μελέτη εστιάστηκε στην ελεγχόμενη αποδέσμευση φαρμακευτικών ουσιών από μια βιοπολυμερική μήτρα κυρίως κατά το πρώιμο στάδιο της μελέτης και τις παραμέτρους που επηρεάζουν το φαινόμενο αυτό. Βασικός στόχος της μελέτης ήταν η κατά το δυνατό μείωση του ορίου ανίχνευσης με SERS της αποδεσμευόμενης ουσίας με την εμβάπτιση της βιοπολυμερικής μήτρας που την εμπεριέχει σε πρότυπα υδατικά διαλύματα. Πραγματοποιήθηκε μια διεξοδική μελέτη των υποστρωμάτων που χρησιμοποιούνται στο SERS και συγκεκριμένα του νανοκολλοειδούς αργύρου (Ag). Για τον σκοπό αυτό, πραγματοποιήθηκαν πειράματα τα οποία έδειξαν την εξάρτηση της έντασης SERS από τη συσσωμάτωση των υποστρωμάτων Ag συναρτήσει του χρόνου και του παράγοντα συσσωμάτωσης, NaCl. Η εφαρμογή του SERS σε μελέτες ουσιών εξαιρετικά χαμηλών συγκεντρώσεων αναδεικνύεται ως ένα πολύ ενδιαφέρον πεδίο έρευνας. Επίσης, ως πρότυπο πείραμα, παρουσιάζεται μεθοδολογία μελέτης με την τεχνική SERS της αποδέσμευσης του αντικαρκινικού φαρμάκου Μitoxantrone (ΜΤΧ) από εμπορικά ράμματα Maxon. Για το σκοπό αυτό, παρασκευάστηκαν πολυμερικά υμένια με εγκλωβισμένη τη δραστική ουσία και η μελέτη της αποδέσμευσης της σε νερό και PBS (phosphate buffered saline) πραγματοποιήθηκε με SERS και UV-Vis, αντίστοιχα. Η φασματοσκοπία UV-Vis χρησιμοποιήθηκε συμπληρωματικά. Στηριζόμενοι στη μεθοδολογία που αναπτύξαμε εξάγαμε ποσοτικά αποτελέσματα από τρία διαφορετικά εργαστηριακά δείγματα, τα οποία προήλθαν από ανάμιξη εμπορικών ραμμάτων Maxon με 1% κ.β. MTX: (α) στην άμορφη φάση έπειτα από ταχεία ψύξη του τήγματος, (β) στην ημικρυσταλλική φάση με σχετικά χαμηλό ποσοστό κρυσταλλικότητας, που λάβαμε έπειτα από ανόπτηση της άμορφης φάσης για περιορισμένο χρόνο στη θερμοκρασία κρυστάλλωσης και (γ) σε μια επίσης ημικρυσταλλική φάση με αρκετά μεγάλο ποσοστό κρυστάλλωσης (όσης και τα εμπορικά ράμματα). Τα αποτελέσματα δείχνουν πως υπάρχει συσχέτιση μεταξύ κρυσταλλικότητας και αποδέσμευσης του φαρμάκου, με τα μικρότερα ποσά αποδέσμευσης στην περίπτωση του άμορφου δείγματος. Αυτό που παρατηρήθηκε στα πρώιμα στάδια της αποδέσμευσης από τις μετρήσεις SERS φαίνεται να επαληθεύεται από αντίστοιχα αποτελέσματα σε μεταγενέστερα στάδια αποδέσμευσης που λάβαμε με εφαρμογή της συμβατικής τεχνικής απορρόφησης ορατού – υπεριώδους (UV-Vis). Ωστόσο, οι ποσοτικές μετρήσεις με τη χρήση του SERS σε πολύ μικρές συγκεντρώσεις έδειξαν μεγαλύτερη ανιχνευτική ευαισθησία σε σχέση με αυτές που πραγματοποιήθηκαν με την απορρόφηση UV-Vis. Συμπερασματικά, το SERS δείχνει ικανό στον ποσοτικό προσδιορισμό ενεργών ουσιών που αποδεσμεύονται από βιοσυμβατά πολυμερικά συστήματα μεταφοράς δραστικών ουσιών σε πολύ μικρές συγκεντρώσεις. / This thesis of specialization is the precursor of a long-term involvement of the laboratory of Applied Molecular Spectroscopy of FORTH/ICE-HT in the implementation of the study of the migration of substances used as barrier and/or as chemical sensors in biopolymer based food packaging and their release into food simulants. In this context, this work attempts to highlight the method of surface enhanced Raman scattering (SERS) as appropriate for quantifying low molecular weight compounds that may be released in aqueous solutions and/or specific food simulants. The study focused on the controlled release of pharmaceuticals from a biopolymeric matrix mainly during the early stage of the study and the parameters affecting this phenomenon. The main objective of the study was to reduce SERS detection limit of the released substance by emerging the substance-incorporated biopolymeric matrix in standard aqueous solutions. In this context, we developed methods to maximize SERS enhancement and consequently reduce the limit of detection of an active substance, Mitoxantrone (MTX). This was achieved by a thorough study of the substrates used in SERS, namely nanocolloidal silver (Ag) suspensions. For this purpose, we contacted experiments which show the dependence of the SERS intensity on the aggregation of Ag substrates as a function of both time and the aggregating agent, NaCl. Also, as a standard experiment, present SERS methodology was applied in the study of the release of the anticancer drug Mitoxantrone (MTX) from commercially available sutures, Maxon. For this purpose, polymeric films prepared with the encapsulated active substance were immersed either in water or/and in PBS (phosphate buffered saline) and the release of MTX was probed by both SERS and UV-Vis. Based on the developed methodology we obtained quantitative results from three different laboratory samples produced by mixing commercial Maxon sutures with 1 wt% MTX: (a) an almost completely amorphous mixture produced by quenching from the melt, (b) a semi-crystalline one possessing low crystallinity that was produced by annealing the amorphous sample at the temperature close to the crystallization one and (c) a semi-crystalline one possessing high crystallinity similar to the commercial product. The results indicate a correlation between crystallinity and drug release rate; the more amorphous the sample is the less quantity of the drug is released. SERS was able to probe the active agent at the early state of release; UV-Vis has supported these results at a later state of the release process. In conclusion, SERS may enable low concentration quantitative assessment of controlled release of drugs from biopolymer-based delivery systems.

Currently, it is very challenging to accurately monitor the response of patients to radiation therapy over the course of treatment. The initial response to ionizing radiation occurs in the cells at a molecular level, and effects of the response are not typically noticeable on short time scales. Surface-enhanced Raman Spectroscopy, or SERS, has proven to be a useful technique in the analysis of tissues and cells at a molecular level. Specifically, the use of targeted SERS probes allows for the detection of specific proteins on the cell membrane. The work presented here looks to assess the feasibility of using targeted SERS probes and two-dimensional SERS microscopy to measure the response of tumour cells to ionizing radiation, by identifying changes in the distribution of membrane proteins following exposure to clinically relevant doses of ionizing radiation (≤ 60Gy). Two different types of targeted SERS probes were investigated, based on the work of Grubisha et al. ([1]; Type I) and Qian et al. ([2]; Type II), both containing a gold nanoparticle core. In a simplified cellular experiment, biotin on the surface of biotinylated OVCAR5 cells was targeted with streptavidin-SERS probes, and the Type-II SERS probes showed the most promising results. However, SERS maps still provided less characteristic spectral signal than expected, and challenges remain in the development of a reproducible cellular imaging technique. Despite difficulties in cellular imaging, the functionality of the Type-II SERS probes was verified separately, using gold slides with a biotin monolayer in place of cells. Following verification, the SERS intensities provided by differently sized clusters of the SERS probes were characterized. To begin, both SERS maps and scanning electron microscope (SEM) images of gold slides were acquired after incubation with Type-II SERS probes for multiple times (1hr, 2hr, 3hr, 12hr). Data analysis of the SEM images provided a measure of the physical distribution of the SERS probes on the surface of the slide, while analysis of the SERS maps provided information about the spectral distribution of the probes. By relating the information provided by the SEM images and SERS maps, a simple polynomial relationship between SERS intensity and the number of clustered SERS probes providing the enhancement was determined, providing a framework for quantifiable SERS imaging. Finally, an independent experiment was devised to ensure that exposure to clinically relevant doses of ionizing radiation would affect the ability of the targeted protein to bind to SERS probes, thus leading to measurable differences in SERS maps of irradiated and unirradiated cells. A series of experiments utilizing the enzyme-linked immunosorbant assay (ELISA) was performed to test the effect of ionizing radiation-induced damage on the ability of streptavidin to bind to biotin, and the results confirmed that a noticeable reduction in binding could be detected at doses as low as 10 Gy. The results of this work demonstrate that following the development of a suitable cell/SERS probe incubation technique, Type-II SERS probes would be appropriate for use in quantifiable SERS imaging. Also, it is suggested that a measurable change in protein function will be present when comparing SERS maps of control cells to those of cells irradiated to clinically relevant doses. / Graduate

The Warburg effect describes the survival advantage of cancer cells in that they can proliferate under low oxygen/hypoxic conditions via a less efficient pathway known as glycolysis. It has not yet been documented at which point, in an oxygen gradient, phenotypic changes occur. Measuring the intracellular redox potential (IRP) and its impact on cellular dynamics would provide greater insight into how disruption of redox homeostasis caused by changes in oxygen concentration leads to aberrant cell signalling and diseases such as cancer. Current techniques in measuring IRP include redox-sensitive fluorescent proteins such as roGFP which is glutathione-specific. Measuring the concentration of one redox couple is, however, not an accurate representation of IRP as it does not necessarily inform about the state of other redox couples. Furthermore, fluorescent biosensors can suffer from photobleaching and may interact with other oxidants. The IRP was measured, in this work, using our newly developed novel-class of surface enhanced Raman scattering nanoparticles which can quantitatively measure the redox potential of cells in vitro. A 'homemade' device was created to keep the cells under fixed pO2 whilst obtaining measurements. The IRP was correlated with the transcriptomic and downstream metabolic profiles of MCF7 breast cancer cells, under perturbed pO2, using 1H NMR spectroscopy (NMR), mass spectrometry (MS) and RNA-sequencing. Discriminatory metabolites were all associated with energy and glucose metabolism. Discriminatory microRNAs were all affiliated with the hallmarks of cancer; the regulation of some is controlled by transcription factors containing redox-sensitive motifs in their DNA binding domains. Multivariate analysis techniques were used to analyse the different data streams in a holistic way that allows the correlation of redox potential, metabolism and transcription.

Vaginal fluid is most often found at crime scenes where a sexual assault has taken place or on clothing or other items collected from sexual assault victims or perpetrators. Because the victim is generally known in these cases, detection of vaginal fluid is not a matter of individual identification, as it might be for semen identification. Instead, linkages can be made between victim and suspect if the sexual assault was carried out digitally or with a foreign object (e.g., bottle, pool cue, cigarette, handle of a hammer or other tool, etc.). If such an object is only analyzed for DNA and the victim is identified, the suspect may claim that the victim’s DNA is present because she handled and/or is the owner of the object and not because it was used to sexually assault her; identification of vaginal fluid residue would alleviate such uncertainty. Most of the research conducted thus far regarding methods for the identification of vaginal fluid involves mRNA biomarkers and identification of various bacterial strains.1-3 However, these approaches require extensive sample preparation and laboratory analysis and have not fully explored the genomic differences among all body fluid RNAs. No existing methods of vaginal fluid identification incorporate both high specificity and rapid analysis.4 Therefore, a new rapid detection method is required. Surface-enhanced Raman spectroscopy (SERS) is an emerging technique with high sensitivity for the forensic analysis of various body fluids. This technique has the potential to improve current vaginal fluid identification techniques due to its ease-of-use, rapid analysis time, portability, and non-destructive nature. For this experiment, all vaginal fluid samples were collected from anonymous donors by saturation of a cotton swab via vaginal insertion. Samples were analyzed on gold nanoparticle chips.4 This nanostructured metal substrate is essential for the large signal-enhancement effect of SERS and also quenches any background fluorescence that sometimes interferes with normal Raman spectroscopy measurements.5 Vaginal fluid SERS signal variation of a single sample over a six-month period was evaluated under both ambient and frozen storage conditions. Vaginal fluid samples were also taken from 10 individuals over the course of a single menstrual cycle. Four samples collected at one-week intervals were obtained from each individual and analyzed using SERS. The SERS vaginal fluid signals showed very little variation as a function of time and storage conditions, indicating that the spectral pattern of vaginal fluid is not likely to change over time. The samples analyzed over the span of one menstrual cycle showed slight intra-donor differences, however, the overall spectral patterns remained consistent and reproducible. When cycle spectra were compared between individuals, very little donor-to-donor variation was observed indicating the potential for a universal vaginal fluid signature spectrum. A cross-validated, partial least squares – discriminant analysis (PLS-DA) model was built to classify all body fluids, where vaginal fluid was identified with 95.0% sensitivity and 96.6% specificity, which indicates that the spectral pattern of vaginal fluid was successfully distinguished from semen and blood. Thus, SERS has a high potential for application in the field of forensic science for vaginal fluid analysis.

Protein engineering strategies, such as directed evolution, generate large libraries of enzyme variants, typically in the range of 106-108 variants. However, the availability of rapid, robust high-throughput screening methods has often limited the impact of directed evolution in discovering enzymes with enhanced catalyst performance. Raman spectroscopy is an established analytical technique, providing molecular specific information, permitting analysis in aqueous solutions and as such is an attractive, alternative screening method for biological systems. Although an inherently weak physical phenomenon, enhanced Raman scattering techniques, such as surface enhanced Raman scattering (SERS) and ultraviolet resonance Raman (UVRR) spectroscopy, can be used to overcome the associated sensitivity issues. Herein, we successfully monitored xanthine oxidase (XO) catalysed conversions of xanthine to uric acid, before extending to hypoxanthine, using two contrasting Raman scattering enhanced approaches. Firstly, a SERS-based assay was developed utilising silver nanoparticles to measure analytes directly and quantitatively on micromolar scale, in the absence of chromogenic substrates or lengthy chromatography. Secondly, a UVRR approach was developed enabling monitoring of the XO-mediated reaction in real-time and without the need to quench the system. Significantly, both methods demonstrated over &gt;30 fold reduction in acquisition times (when compared to conventional HPLC analysis), and offered excellent medium-term reproducibility and accuracy of results over significant time periods. Furthermore, investigations were made into developing this SERS-based assay into an enantiomeric screen using another vibrational spectroscopy approach, Raman optical activity (ROA), along with circular dichroism (CD). Successful chiral reduced nanoparticles were synthesised, with multiple characterisation techniques employed, affording enantiopure Au-cysteine and Ag-tyrosine colloids. However, it was not possible to generate consistent and reproducible SEROA responses, with these techniques ultimately being unsuccessful in analysing these chiral sensitive nanoprobes, and thus differentiating between the D- and L- forms. Finally, a novel SERS-based approach, in combination with the standard addition method (SAM), was developed for the routine analysis of uric acid (end product in XO catalysed reaction(s) and biomarker for various diseases), at clinically relevant levels in urine samples from patients. Results were highly comparable and in very good agreement with HPLC analyses, with an average < 9% difference in predictions between the two analytical approaches across all samples analysed, and a 60-fold reduction in acquisition time (when compared with HPLC). Together, the research presented in this thesis demonstrates the suitability of Raman enhanced techniques for quantitative analysis, measuring the analytes directly using a portable Raman instrument and, most importantly, offering significant reductions in acquisition times when compared to established analytical techniques.

This dissertation comprises experimental studies on the synthesis and applications of metallic nanoshells. These are a class of nanoparticles composed of a dielectric core and a thin metallic shell. Metallic nanoshells play an important role in nanotechnology, particularly in nanomedicine, due to their peculiar optical properties. The overall objectives of the dissertation were to improve the fabrication of these nanoparticles, and to demonstrate new applications of these materials in cancer research and spectroscopy. The fabrication of nanoshells is a multi-step process. Previously to our work, the procedures for the synthesis of nanoshells reported in the literature lacked systematic characterization of the various steps. The procedure was extremely time-consuming and the results demonstrated a high degree of size variation. In Chapter 3, we have developed characterization tools that provide checkpoints for each step of the synthesis. We demonstrated that it is possible to control the degree of coverage on the shell for a fixed amount of reagents, and also showed important differences on the shell growth phase for gold and silver. The synthetic optimization presented in Chapter 3 led to an overall faster protocol than those previously reported. Although the improvements presented in Chapter 3 led to a higher degree of control on the synthesis of nanoshells, the variations in the resulting particle population were still too large for applications in single particle spectroscopy and imaging. In Chapter 4, the synthesis was completely reformulated, aiming to narrow the size distribution of the nanoshell colloids. Through the use of a reverse microemulsion, we were able to fabricate ultramonodisperse silica (SiO2) cores, which translate into nanoshell colloids with narrow extinction bands that are comparable to those of a single nanoshell. We then fabricate a library of colloids with different core sizes, shell thicknesses and composition (gold or silver). The localized surface plasmon resonance (LSPR) of these colloids span across the visible range. From this library, two nanoshells (18nm silver on a 50nm SiO2 core, and 18nm gold on a 72nm SiO2 core) were selected for a proof of principle cell imaging experiment. The silver nanoshells were coated with a nuclear localization signal, allowing it to target the nuclear membrane. The gold nanoshells were coated with an antibody that binds to a receptor on the plasma membrane of MCF-7 human breast cancer cells. The nanoshells were easily distinguishable by eye in a dark field microscope and successful targeting was demonstrated by hyperspectral dark field microscopy. A comparison was made between fluorescent phalloidin and nanoshells, showing the superior photostability of the nanoparticles for long-term cell imaging. The results from Chapter 4 suggest that the nanoshells obtained by our new synthetic route present acceptable particle-to-particle variations in their optical properties that enables single particle extinction spectroscopy for cell imaging. In Chapter 5 we explored the use of these nanoshells for single-particle Surface-enhanced Raman spectroscopy (SERS). Notice that particle-to-particle variations in SERS are expected to be more significant than in extinction spectroscopy. This is because particle-to-particle SERS variabilities are driven by subtle changes in geometric parameters (particle size, shape, roughness). Two types of gold nanoshells were prepared and different excitation wavelengths (λex) were evaluated, respective to the LSPR of the nanoshells. Individual scattering spectra were acquired for each particle, for a total of 163 nanoshells, at two laser excitation wavelengths (632.8 nm and 785 nm). The particle-to-particle variations in SERS intensity were evaluated and correlated to the efficiency of the scattering at the LSPR peak. Chapter 6 finally shows the application of gold nanoshells as a platform for the direct visualization of circulating tumor cells (CTCs). 4T1 breast cancer cells were transduced with a non-native target protein (Thy1.1) and an anti-Thy1.1 antibody was conjugated to gold nanoshells. The use of a transduced target creates the ideal scenario for the assessment of nonspecific binding. On the in vitro phase of the study, non-transduced cells were used as a negative control. In this phase, parameters such as incubation times and nanoshell concentration were established. A murine model was then developed with the transduced 4T1 cells for the ex vivo portion of the work. Non-transduced cells were implanted in a control group. Blood was drawn from mice in both groups over the course of 29 days. Antibody-conjugated nanoshells were incubated with the blood samples and detection of single CTCs was achieved in a dark field microscope. Low levels of nonspecific binding were observed in the control group for non-transduced cells and across different cell types normally found in peripheral blood (e.g. lymphocytes). All positive and negative subjects were successfully identified. Chapter 7 provides an outlook of the work presented here and elaborates on possible directions to further develop the use of nanoshells in bioapplications and spectroscopy. / Graduate / 2019-05-03

This thesis presents a light scattering-based method for biomarker detection, which could potentially be used for the quantification of multiple biomarkers specific to B-cell malignancies. This method uses fabricated gold nanoparticle probes to amplify inelastic light scattering in a process referred to as surface-enhanced Raman scattering. These gold nanoparticle probes were conjugated to antibodies for specific and targeted molecular binding. The spectrum of the amplified inelastic light scattering was detected using a spectrometer and a detector. To detect the light scattering signal from the gold nanoparticle probes, several commercial Raman spectrometer instruments were evaluated. Initial results from these evaluations are presented in this thesis. After system evaluation, a custom Raman microscope system was designed, built, and tested. This system was used for the development of a surface-enhanced Raman spectroscopy-based immunoassay. The development of this assay confirms the successful design of gold nanoparticle probes for the specific targeting and detection of immunoglobulins. The immunoassay also shows promise for the simultaneous detection of multiple biomarkers specific to B-cell malignancies.

This thesis presents results of studies using the technique of surface-enhanced Raman scattering (SERS) spectroscopy to investigate surface processes occurring on gold during electrochemical experiments in thiosulfate solutions and during leaching in ammoniacal copper(II) thiosulfate systems. The gold SERS electrode was characterised using X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive X-ray analysis (EDX), linear sweep voltammetry (LSV) and cyclic voltammetry (CV). SEM investigations of the SERS activated gold surface showed the presence of electrodeposited dendrites with nanoscale features. XRD studies of the dendrites showed them to be polycrystalline with a large proportion of Au(111). Rotating disk electrode (RDE) studies of polished and SERS electrodes were undertaken in order to clarify the electrochemistry of various thiosulfate systems. The ex situ techniques of XPS and attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy were used to determine the presence of sulfur, copper and nitrogen on leached or electro-oxidised surfaces. Voltammetric methods were used to determine sulfur and copper surface coverages at various potentials in sulfide, thiosulfate and ammoniacal copper(II) thiosulfate media. The electro-oxidation of sulfide was examined as a model system in order to identify spectral features and coverage associated with various potential-dependent sulfur layers. In the hydrogen evolution region, a surface layer formed by underpotential deposition in acid and basic media was characterised by a gold-sulfur stretching band, Au-S, attributed in the literature to a monoatomic stretching mode of sulfur bonded to gold. The surface coverage in this potential region was limited to 0.35 ML, representing adsorption in a (3x3)R30 structure. Bands were found to be absent that would have indicated the adsorption of SH– species as has been reported in the literature. A facile change in the position of the Au-S band with potential, unaccompanied by Faradaic processes, was seen when the adsorbed (3x3)R30 sulfur layer was examined in a sulfide-free solution. This may indicate a change in sulfur adsorption sites with potential in the hydrogen evolution region. At potentials above the S II/S0 reversible value in sulfide solutions, the surface coverage increased and S-S bands were observed, indicating the formation of an adsorbed polysulfide species, Au-Sn. A change in the position of the Au-S band was seen to accompany the formation of the S-S bands. As coverage further increased, bands due to S-S-S bending, S-S-S, developed that were characteristic of cyclo octasulfur, S8. On removal from sulfide solution and rinsing, a characteristic SERS spectrum was observed ex situ. The spectrum showed a characteristic S-S at 460 cm-1 and Au-S at 325 cm-1 and was assigned to an adlayer of S8 adsorbed on gold in a crown configuration, Au S8. Gold was polarised in thiosulfate solutions at a potential at which gold dissolution is known to occur. In situ SERS spectra showed bands characteristic of S-S bonding and Au2S to occur after 1 hr for thiosulfate with sodium and ammonium counter-ions and for both systems in the presence of ammonia. XPS studies of polished gold held in sodium thiosulfate under these conditions showed S 2p binding energies corresponding to metal sulfide and pyritic sulfur, S22-. After 72 hrs at the mixed potential in air saturated sodium thiosulfate, SERS investigations showed a spectrum with Au-S8 characteristics. XPS studies on a polished electrode under these conditions showed a third type of S 2p binding with a binding energy between that of pyritic sulfur and S8. The sodium thiosulfate system showed an adsorbed tetrathionate-like surface species, Au-S4O6, to be present at the mixed potential and to disappear with increased potential prior to the formation of bulk S8 via an Au-S8 intermediate. In the presence of the ammonium cation at high potentials, Au-Sn bands appear in the presence of a more intense and broad Au-S characteristic of gold sulfide, Au2S. This was assigned to a mixed gold sulfide/polysulfide phase, Au2S/Sn. With addition of ammonia, the surface species Au S4O6, Au2S/Sn and, tentatively, adsorbed NH3 were observed above the mixed potential. For gold in air-saturated copper(II) ammoniacal thiosulfate media, bands due S-S at 382 cm-1 and symmetric S-O stretching, symS-O, at 1017 cm-1 developed during leaching at the mixed potential. These modes diminished and, when rinsed and examined in water, were replaced by a single band at 255 cm 1 assigned to a metal sulfide stretch. In typical leach solutions, sulfur and copper coverages showed a 2:1 atomic ratio after leaching for 16 h. Ex situ ATR and XPS studies showed that ammonia was adsorbed to a surface copper sulfide. Kinetic studies using atomic absorption spectroscopy (AAS) to measure gold in solution showed that the ammoniacal copper(II) thiosulfate leaching solution exhibited higher dissolution rates in the presence of the sodium counter ion than the ammonium. Thiourea as an additive to thiosulfate solutions was seen to disrupt S-S bonding in both Au-S8 and Au2S/Sn surface structures.

Current micro-scale electronics technology has been approaching rapidly towards its technological limit. This has shifted the focus towards nano-scale technology in recent years. More and more researchers around the globe are working in pursuit of bringing nano-scale technology into mainstream. The research carried out here is a small step towards a similar goal. The remarkable optical properties exhibited by certain nano-scale structures are in stark contrast to their bulk form and this provides the basis for this research. Two kinds of nanostructures are developed and investigated for their optical properties. One of these is nanofibers processed from a polymer known as polyaniline (PANI). The focus of this study is to investigate its optical and conductive properties under different conditions of doping environments, temperature and polymerization conditions. Optical characterization technique such as UV-Visible spectroscopy is developed to carry out the investigation. The developed nanofibers have been demonstrated to possess optical and conductive properties to be dependent on doping variables. Study of these optical properties could prove very useful in the development of electrochromic devices and gas sensors. Later in the research, UV-Visible spectroscopy has been improved into a low cost Raman spectroscopy setup which is validated by experimentation carried out on some samples. The second type of nano-structure developed and investigated, is an array of nanoparticles of noble metals such as gold and silver. Such an array is shown to exhibit a phenomenon called plasmon resonance effect when excited by light. UV-Visible spectroscopy technique is utilized to investigate this effect for metal nano-arrays. A biologically nano-structured surface (wing of an insect called cicada) is used as the substrate for the fabrication of metal array. A serious attempt has also been made to do 'Surface Enhanced Raman Spectroscopy (SERS)', making use of the metal nano-array developed. This technique improves the raman lines intensities of certain less sensitive samples such as thiophenol, which are known to give weak raman lines. This is carried out by adsorbing the sample on the metal nano-array.

The main theme of this thesis is to study effects of different environments on geometric and electronic structures, as well as optical responses, of molecules using time-(in)dependent density functional theory. Theoretical calculations have been carried out for properties that can be measured by conventional and advanced experimental techniques, including one-photon absorption (OPA), two-photon absorption (TPA), surface-enhanced Raman scattering (SERS) and second order nonlinear optical (NLO) response. The obtained good agreement between the theory and the experiment allows to further extract useful information about inter- and intra-molecular interactions that are not accessible experimentally. By comparing calculated one-photon absorption spectra of aluminum phthalocyanine chloride (AlPcCl) and AlPcCl -water complexes with the corresponding experiments, detailed information about the interaction between water molecules and AlPcCl, and geometric changes of AlPcCl molecule has been obtained. Effects of aggregation on two-photon absorption spectra of octupolar molecules have been examined. It is shown that the formation of clusters through inter-molecular hydrogen bonding can drastically change profiles of TPA spectra. It has also demonstrated that a well designed molecular aggregate/cluster, dendrimer, can enhance the second order nonlinear optical response of the molecules. In collaboration with experimentalists, a series of end-capped triply branched dendritic chromophores have been characterized, which can lead to large enhancement of the second order NLO property when the dipoles of the three branches in the dendrimers are highly parallelized. Surface-enhanced Raman scattering has made the detection of single molecules on metal surface become possible. Chemically bonded molecule-metal systems have been extensively studied. We have shown in a joint experimental and theoretical work that stable Raman spectra of a non-bonding molecule, perylene, physically adsorbed on Ag nano-particles can also be observed at low temperature. It is found that the local enhanced field has a tendency to drive molecule toward a gap of two closely lying nano-particles. The trapped molecule can thus provide a stable Raman spectrum with high resolution when its thermal motion is reduced at low temperature. For the ever growing size of molecular complexes, there is always the need to develop new computational methods. A conceptually simple but computationally efficient method, named as central insertion scheme (CIS), is proposed that allows to calculate electronic structure of quasi-periodic system containing more than 100,000 electrons at density functional theory levels. It enables to monitor the evolution of electronic structure with respect to the size of the system. / QC 20100823