O presente trabalho tem como objetivo estudar escoamentos de tornados e sua ação sobre corpos imersos empregando ferramentas numéricas da Engenharia do Vento Computacional (EVC). Os tornados constituem-se atualmente em uma das causas de desastres naturais no Brasil, especialmente nas regiões sul e sudeste do país, como também em alguns países vizinhos. Os efeitos gerados são geralmente localizados e de curta duração, podendo ser devastadores dependendo da escala do tornado. Tais características dificultam a realização de estudos detalhados a partir de eventos reais, o que levou ao desenvolvimento de modelos experimentais e numéricos. A abordagem numérica é utilizada neste trabalho para a simulação de tornados, a qual se baseia nas equações de Navier-Stokes e na equação de conservação de massa, considerando a hipótese de pseudo-compressibilidade e condições isotérmicas. Para escoamentos com turbulência utiliza-se a Simulação Direta de Grandes Escalas com o modelo clássico de Smagorinsky para as escalas inferiores à resolução da malha (Large Eddy Simulation ou LES em inglês). A discretização das equações fundamentais do escoamento se realiza com um esquema explícito de dois passos de Taylor-Galerkin, onde o Método dos Elementos Finitos é empregado na discretização espacial utilizando-se o elemento hexaédrico trilinear isoparamétrico com um ponto de integração e controle de modos espúrios Na presença de corpos imersos que se movem para simular os deslocamentos dos tornados, o escoamento é descrito cinematicamente através de uma formulação Arbitrária Lagrangeana-Euleriana (ALE) que inclui um esquema de movimento de malha. Tornados são reproduzidos através da simulação numérica de dispositivos experimentais e do Modelo de Vórtice Combinado de Rankine (RCVM). Exemplos clássicos da Dinâmica dos Fluidos Computacional são apresentados inicialmente para a verificação das ferramentas numéricas implementadas. Finalmente, problemas envolvendo tornados móveis e estacionários são analisados, incluindo sua ação sobre corpos imersos. Nos modelos baseados em experimentos, a variação da relação de redemoinho determinou os diferentes padrões de escoamento observados no laboratório. Nos exemplos de modelo de vórtice, quando o tornado impactou o corpo imerso gerou picos de forças em todas as direções e, após a passar pelo mesmo, produziu uma alteração significativa na estrutura do vórtice. / Analyses of tornado flows and its action on immersed bodies using numerical tools of Computational Wind Engineering (CWE) are the main aims of the present work. Tornadoes are currently one of the causes of natural disasters in Brazil, occurring more frequently in the southern and southeastern regions of the country, as well as in some neighboring countries. Effects are usually localized, presenting a short time interval, which can be devastating depending on the scale of the tornado. These characteristics difficult to carry out detailed studies based on real events, leading to the development of experimental and numerical models. The numerical approach is used in this work for the simulation of tornadoes, which is based on the Navier-Stokes equations and the mass conservation equation, considering the hypothesis of pseudo-compressibility and isothermal conditions. For turbulent flows, Large Eddy Simulation (LES) is used with the classical Smagorinsky model for sub-grid scales Discretization is performed the explicit two-step Taylor-Galerkin scheme, where the Finite Element Method is used in spatial discretization using isoparametric trilinear hexahedral elements with one-point quadrature and hourglass control. In the presence of immersed bodies that are moving in order to simulate translating tornadoes, the flow is kinematically described through a Lagrangian-Eulerian Arbitrary (ALE) formulation, which includes a mesh motion scheme. Tornadoes are reproduced using numerical simulation of experimental devices and the Rankine Combined Vortex Model (RCVM). Classical examples of Computational Fluid Dynamics are presented initially for the verification of the numerical tools implemented here. Finally, problems involving moving and stationary tornadoes are analyzed, including their actions on immersed bodies. For models based on experiments, the variation of the swirl ratio determined the different flow patterns observed in the laboratory. In the vortex model examples, when the tornado impacted on the immersed body, peaks of forces were generated in all directions and, after passing over it, a significant change in the structure of the vortex was produced.

Cette thèse est une contribution à l'étude de la turbulence dans le champ proche de la sortie de jets, avec ou sans effets de rotation. Notre dispositif expérimental permet de générer un jet tournant qui se développe en formant une couche de mélange axisymétrique turbulente et dont le nombre de swirl peut être précisément fixé. L'écoulement est caractérisé par PIV stéréoscopique, avec un recours à des acquisitions à haute cadence de manière à résoudre la dynamique des grandes échelles de la turbulence. Nous avons proposé une méthode qui permet de déterminer la vitesse de convection des structures turbulentes et d'estimer la validité de l'approximation de Taylor. Cette étude démontre qu'il est ici légitime de décrire les structures spatiales de la turbulence à partir de mesures temporelle réalisées dans un plan transverse à l'écoulement. Dans le cœur du jet non tournant, une POD confirme la prédominance de modes m=0 et m=1 décrite dans de précédentes études. Le mode m=1 prend plus souvent la forme d'un battement que d'une hélice. Dans la couche de mélange, les tourbillons longitudinaux sont les structures dominantes. Une organisation sous forme de paires de signe opposé orientées radialement est mise en évidence par l'analyse des corrélations doubles de vorticité. L'étude des corrélations vorticité-vitesse donne la position préférentielle de ces tourbillons par rapport aux modes m=0 et m=1. Nous avons alors proposé un scénario d'interaction entre les modes m=0 et m=1, les tourbillons longitudinaux et le champ moyen. Lorsque le nombre de swirl augmente, le taux de croissance et l'énergie cinétique turbulente dans la couche de mélange du jet varient de manière non-monotone. Ceci est dû à des conditions initiales issues du mécanisme de mise en rotation, qui ont un effet contraire à celui de l'alignement du tenseur de Reynolds avec le tenseur des déformations. L'orientation des paires de tourbillons avec le swirl permet d'interpréter dynamiquement l'évolution du tenseur de Reynolds.

This thesis aims at studying the breakup of swirling liquid sheets discharging from the outer orifice of gas centered swirl coaxial atomizers. Such atomizers are considered as propellant injection systems for semi-cryogenic liquid rocket engines. A gas centered swirl coaxial type atomizer discharges an annular swirling liquid sheet which is atomized by a gaseous jet issuing from the central orifice of the atomizer. The primary objectives of this work were to understand the fluid dynamic interaction process between the outer liquid sheet and the central gas jet and its role on the breakup process of the liquid sheet. Cold flow experiments were carried out by constructing custom made gas centered swirl coaxial atomizers. Two different atomizer configurations with varying swirl effect were studied. The jets were injected into ambient atmospheric air medium with tap water and air as experimental fluids. The flow conditions were described in terms of Weber number (Wel) and Reynolds number (Reg) for liquid sheet and the air jet respectively. Spray images were captured by employing an image acquisition system comprising a high resolution digital camera and a strobe lamp. The captured spray images at different combinations of Wel and Reg were analyzed to extract quantitative measurements of breakup length (Lb), spray cone angle (θs), spray width (SW) and two-dimensional surface profile of liquid sheets. Quantitative analysis of the variation of Lb with Reg with different values of Wel suggested that low inertia liquid sheets undergo an efficient breakup process. High inertia liquid sheets ignore the presence of central air jet at lower values of Reg however undergo air jet breakup at higher values of Reg. Qualitative analysis of experimental observations revealed that the entrainment process, established between the inner surface of the liquid sheet and the boundary of central jet, triggers the air assisted sheet breakup by drawing the liquid sheet closer to the spray axis. The entrainment process may be developing corrugations on the surface of liquid sheet which promotes the production of thick liquid ligaments from the sheet surface. The level of surface corrugations on the liquid sheet, quantified by means of tortuosity of liquid sheet profile, increases with increasing Reg. Limited studies on the effect of variation swirl intensity on the air assisted breakup process of liquid sheets did not show any significant influence for the atomizers examined in the present work.

Increasingly stringent pollution and emission controls have caused a rise in the use of combustors operating under lean, premixed conditions. Operating lean (excess air) lowers the level of nitrous oxides (NOx) emitted to the environment. In addition, concerns over climate change due to increased carbon dioxide (CO2) emissions and the need for energy independence in the United States have spurred interest in developing combustors capable of operating with a wide range of fuel compositions. One method to decrease the carbon footprint of modern combustors is the use of high hydrogen content (HHC) fuels. The objective of this research is to develop tools to better understand the physics of turbulent flame propagation in highly stretch sensitive premixed flames in order to predict their behavior at conditions realistic to the environment of gas turbine combustors. This thesis presents the results of an experimental study into the flame propagation characteristics of highly stretch-sensitive, turbulent premixed flames generated in a low swirl burner (LSB). This study uses a scaling law, developed in an earlier thesis from leading point concepts for turbulent premixed flames, to collapse turbulent flame speed data over a wide range of conditions. The flow and flame structure are characterized using high speed particle image velocimetry (PIV) over a wide range of fuel compositions, mean flow velocities, and turbulence levels. The first part of this study looks at turbulent flame speeds for these mixtures and applies the previously developed leading points scaling model in order to test its validity in an alternate geometry. The model was found to collapse the turbulent flame speed data over a wide range of fuel compositions and turbulence levels, giving merit to the leading points model as a method that can produce meaningful results with different geometries and turbulent flame speed definitions. The second part of this thesis examines flame front topologies and stretch statistics of these highly stretch sensitive, turbulent premixed flames. Instantaneous flame front locations and local flow velocities are used to calculate flame curvatures and tangential strain rates. Statistics of these two quantities are calculated both over the entire flame surface and also conditioned at the leading points of the flames. Results presented do not support the arguments made in the development of the leading points model. Only minor effects of fuel composition are noted on curvature statistics, which are mostly dominated by the turbulence. There is a stronger sensitivity for tangential strain rate statistics, however, time-averaged values are still well below the values hypothesized from the leading points model. The results of this study emphasize the importance of local flame topology measurements towards the development of predictive models of the turbulent flame speed.

Ce travail de recherche est consacré à l'étude des processus d'allumage et de stabilisation des flammes turbulentes en configuration aéronautique. Cette thèse, entièrement expérimentale, se base dans une première partie sur l'étude et la compréhension de l'effet des paramètres locaux (vitesse et concentration en combustible) et de l'historique du noyau de flamme au cours de sa propagation sur les statistiques d'allumage. Pour expliquer ces statistiques, des scénarios sont proposés et validés pour différentes configurations opératoires. La deuxième partie de la thèse est dédiée à l'amélioration de la stabilité des flammes kérosène/air par dopage en hydrogène. Nous avons montré qu'à même structure de flamme, l'amplitude des fluctuations de pression était abaissée par la présence d'hydrogène.

O presente trabalho tem como objetivo estudar escoamentos de tornados e sua ação sobre corpos imersos empregando ferramentas numéricas da Engenharia do Vento Computacional (EVC). Os tornados constituem-se atualmente em uma das causas de desastres naturais no Brasil, especialmente nas regiões sul e sudeste do país, como também em alguns países vizinhos. Os efeitos gerados são geralmente localizados e de curta duração, podendo ser devastadores dependendo da escala do tornado. Tais características dificultam a realização de estudos detalhados a partir de eventos reais, o que levou ao desenvolvimento de modelos experimentais e numéricos. A abordagem numérica é utilizada neste trabalho para a simulação de tornados, a qual se baseia nas equações de Navier-Stokes e na equação de conservação de massa, considerando a hipótese de pseudo-compressibilidade e condições isotérmicas. Para escoamentos com turbulência utiliza-se a Simulação Direta de Grandes Escalas com o modelo clássico de Smagorinsky para as escalas inferiores à resolução da malha (Large Eddy Simulation ou LES em inglês). A discretização das equações fundamentais do escoamento se realiza com um esquema explícito de dois passos de Taylor-Galerkin, onde o Método dos Elementos Finitos é empregado na discretização espacial utilizando-se o elemento hexaédrico trilinear isoparamétrico com um ponto de integração e controle de modos espúrios Na presença de corpos imersos que se movem para simular os deslocamentos dos tornados, o escoamento é descrito cinematicamente através de uma formulação Arbitrária Lagrangeana-Euleriana (ALE) que inclui um esquema de movimento de malha. Tornados são reproduzidos através da simulação numérica de dispositivos experimentais e do Modelo de Vórtice Combinado de Rankine (RCVM). Exemplos clássicos da Dinâmica dos Fluidos Computacional são apresentados inicialmente para a verificação das ferramentas numéricas implementadas. Finalmente, problemas envolvendo tornados móveis e estacionários são analisados, incluindo sua ação sobre corpos imersos. Nos modelos baseados em experimentos, a variação da relação de redemoinho determinou os diferentes padrões de escoamento observados no laboratório. Nos exemplos de modelo de vórtice, quando o tornado impactou o corpo imerso gerou picos de forças em todas as direções e, após a passar pelo mesmo, produziu uma alteração significativa na estrutura do vórtice. / Analyses of tornado flows and its action on immersed bodies using numerical tools of Computational Wind Engineering (CWE) are the main aims of the present work. Tornadoes are currently one of the causes of natural disasters in Brazil, occurring more frequently in the southern and southeastern regions of the country, as well as in some neighboring countries. Effects are usually localized, presenting a short time interval, which can be devastating depending on the scale of the tornado. These characteristics difficult to carry out detailed studies based on real events, leading to the development of experimental and numerical models. The numerical approach is used in this work for the simulation of tornadoes, which is based on the Navier-Stokes equations and the mass conservation equation, considering the hypothesis of pseudo-compressibility and isothermal conditions. For turbulent flows, Large Eddy Simulation (LES) is used with the classical Smagorinsky model for sub-grid scales Discretization is performed the explicit two-step Taylor-Galerkin scheme, where the Finite Element Method is used in spatial discretization using isoparametric trilinear hexahedral elements with one-point quadrature and hourglass control. In the presence of immersed bodies that are moving in order to simulate translating tornadoes, the flow is kinematically described through a Lagrangian-Eulerian Arbitrary (ALE) formulation, which includes a mesh motion scheme. Tornadoes are reproduced using numerical simulation of experimental devices and the Rankine Combined Vortex Model (RCVM). Classical examples of Computational Fluid Dynamics are presented initially for the verification of the numerical tools implemented here. Finally, problems involving moving and stationary tornadoes are analyzed, including their actions on immersed bodies. For models based on experiments, the variation of the swirl ratio determined the different flow patterns observed in the laboratory. In the vortex model examples, when the tornado impacted on the immersed body, peaks of forces were generated in all directions and, after passing over it, a significant change in the structure of the vortex was produced.

The complex multiphase flow physics of spray-swirl interaction in both reacting and non-reacting environment is of fundamental and applied significance for a wide variety of applications ranging from gas turbine combustors to pharmaceutical drug nebulizers. Understanding the intricate dynamics between this two phase flow field is pivotal for enhancing mixing characteristics, reducing pollutant emissions and increasing the combustion efficiency in next generation combustors. The present work experimentally investigates the near and far-field break-up, dispersion and coalescence characteristics of a hollow cone spray in an unconfined, co¬annular isothermal swirling air jet environment. The experiments were conducted using an axial-flow hollow cone spray nozzle having a 0.5 mm orifice. Nozzle injection pressure (PN = 1 bar) corresponding to a Reynolds number at nozzle exit ReN = 7900 used as the test setting. At this setting, the operating Reynolds number of the co-annular swirling air stream number (Res) was varied in four distinct steps, i.e. Res = 1600, 3200, 4800 and 5600. Swirl was imparted to the co¬axial flow using a guided vane swirler with blade angle of Ф=45° (corresponding geometric swirl number SG = 0.8). Two types of laser diagnostic techniques were utilized: Particle / Droplet imaging analysis (PDIA) and shadowgraph to study the underlying physical mechanisms involved in the primary breakup, dispersion and coalescence dynamics of the spray. Measurements were made in the spray in both axial and radial directions and they indicate that Sauter Mean Diameter (SMD) in radial direction is highly reliant on the intensity of swirl imparted to the spray. The spray is subdivided into two zones as function of swirl in axial and radial direction: (1) near field of the nozzle (ligament regime) where variation in SMD arises predominantly due to primary breakup of liquid films (2) far-field of the nozzle where dispersion and collision induced coalescence of droplets is dominant. Each regime has been analyzed meticulously, by computing probability of primary break-up, probability of coalescence and spatio-temporal distribution of droplets which gives probabilistic estimate of aforementioned governing phenomena. In addition to this, spray global length scale parameters such as spray cone angle, break-up length, wavelength of liquid film has been characterized by varying Res while maintaining constant ReN.

O presente trabalho tem como objetivo estudar escoamentos de tornados e sua ação sobre corpos imersos empregando ferramentas numéricas da Engenharia do Vento Computacional (EVC). Os tornados constituem-se atualmente em uma das causas de desastres naturais no Brasil, especialmente nas regiões sul e sudeste do país, como também em alguns países vizinhos. Os efeitos gerados são geralmente localizados e de curta duração, podendo ser devastadores dependendo da escala do tornado. Tais características dificultam a realização de estudos detalhados a partir de eventos reais, o que levou ao desenvolvimento de modelos experimentais e numéricos. A abordagem numérica é utilizada neste trabalho para a simulação de tornados, a qual se baseia nas equações de Navier-Stokes e na equação de conservação de massa, considerando a hipótese de pseudo-compressibilidade e condições isotérmicas. Para escoamentos com turbulência utiliza-se a Simulação Direta de Grandes Escalas com o modelo clássico de Smagorinsky para as escalas inferiores à resolução da malha (Large Eddy Simulation ou LES em inglês). A discretização das equações fundamentais do escoamento se realiza com um esquema explícito de dois passos de Taylor-Galerkin, onde o Método dos Elementos Finitos é empregado na discretização espacial utilizando-se o elemento hexaédrico trilinear isoparamétrico com um ponto de integração e controle de modos espúrios Na presença de corpos imersos que se movem para simular os deslocamentos dos tornados, o escoamento é descrito cinematicamente através de uma formulação Arbitrária Lagrangeana-Euleriana (ALE) que inclui um esquema de movimento de malha. Tornados são reproduzidos através da simulação numérica de dispositivos experimentais e do Modelo de Vórtice Combinado de Rankine (RCVM). Exemplos clássicos da Dinâmica dos Fluidos Computacional são apresentados inicialmente para a verificação das ferramentas numéricas implementadas. Finalmente, problemas envolvendo tornados móveis e estacionários são analisados, incluindo sua ação sobre corpos imersos. Nos modelos baseados em experimentos, a variação da relação de redemoinho determinou os diferentes padrões de escoamento observados no laboratório. Nos exemplos de modelo de vórtice, quando o tornado impactou o corpo imerso gerou picos de forças em todas as direções e, após a passar pelo mesmo, produziu uma alteração significativa na estrutura do vórtice. / Analyses of tornado flows and its action on immersed bodies using numerical tools of Computational Wind Engineering (CWE) are the main aims of the present work. Tornadoes are currently one of the causes of natural disasters in Brazil, occurring more frequently in the southern and southeastern regions of the country, as well as in some neighboring countries. Effects are usually localized, presenting a short time interval, which can be devastating depending on the scale of the tornado. These characteristics difficult to carry out detailed studies based on real events, leading to the development of experimental and numerical models. The numerical approach is used in this work for the simulation of tornadoes, which is based on the Navier-Stokes equations and the mass conservation equation, considering the hypothesis of pseudo-compressibility and isothermal conditions. For turbulent flows, Large Eddy Simulation (LES) is used with the classical Smagorinsky model for sub-grid scales Discretization is performed the explicit two-step Taylor-Galerkin scheme, where the Finite Element Method is used in spatial discretization using isoparametric trilinear hexahedral elements with one-point quadrature and hourglass control. In the presence of immersed bodies that are moving in order to simulate translating tornadoes, the flow is kinematically described through a Lagrangian-Eulerian Arbitrary (ALE) formulation, which includes a mesh motion scheme. Tornadoes are reproduced using numerical simulation of experimental devices and the Rankine Combined Vortex Model (RCVM). Classical examples of Computational Fluid Dynamics are presented initially for the verification of the numerical tools implemented here. Finally, problems involving moving and stationary tornadoes are analyzed, including their actions on immersed bodies. For models based on experiments, the variation of the swirl ratio determined the different flow patterns observed in the laboratory. In the vortex model examples, when the tornado impacted on the immersed body, peaks of forces were generated in all directions and, after passing over it, a significant change in the structure of the vortex was produced.

This research comprises an experimental and theoretical study on convective boiling inside tubes containing twisted-tape inserts. The demand for more compact and efficient thermal systems, in which the heat exchangers plays an important role, has led to the development and use of various heat transfer enhancement techniques. Among them twisted-tape insert as a swirl flow device is one of the most used. Twisted-tape inserts have been used for over more than one century ago as a technique of heat transfer enhancement applied to heat exchangers. However, the heat transfer augmentation comes together with pressure drop increment, impacting the pumping power and, consequently, the system efficiency. Moreover, until now it is not clear, the operational conditions under which the heat transfer coefficient augmentation by the use of twisted-tape inserts overcomes pressure drop penalty. In the present study, initially, extensive investigations of the literature concerning convective boiling inside plain tubes with and without twisted-tape inserts were performed. This literature review covers pressure drop, heat transfer coefficient and the leading frictional pressure drop gradient and heat transfer coefficient predictive methods during convective boiling inside tubes with and without twisted-tape inserts. Then, pressure drop and heat transfer coefficient results acquired in the present study were obtained in an experimental apparatus of 12.7 and 15.9 mm ID tubes during flow boiling of R134a for twisted-tape ratios of 3, 4, 9, 14 and tubes without inserts, mass velocities ranging from 75 to 200 kg/m2 s, saturation temperatures of 5 and 15°C and heat fluxes of 5 and 10 kW/m2. The experimental results were parametrically analyzed and compared against the predictive methods from literature. An analysis of the enhancement of the heat transfer coefficient and the pressure drop penalty is presented. Heat transfer coefficient increments up to 45% keeping the same pumping power and pressure drop penalty of about 35% were obtained by using twisted-tape relative to tubes without inserts. Additionally, through comparison of the present study experimental results with the predictive methods from the literature for heat transfer coefficient during two-phase flow inside tube containing twisted-tape inserts, it was verified that non of these methods predict satisfactory well the experimental results. However, a new method was develop for predicting the heat transfer coefficient during flow boiling inside tubes containing twisted-tape inserts based on the experimental results obtained in the present study. The predictive method takes into account the physical picture of the swirl flow phenomenon by including swirl flow effects promoted by the twisted-tape inserts. The proposed method predicts satisfactorily well the data obtained in the present study, predicting 89.1% of the experimental data within an error band of ± 30% and absolute mean deviation of 15.7%. / A presente pesquisa trata-se de um estudo teórico e experimental sobre a ebulição convectiva no interior de tubos com fitas retorcidas. A crescente demanda por sistemas térmicos mais compactos e eficientes, nos quais os trocadores de calor apresentam elevada relevância, tem motivado o desenvolvimento de inúmeras técnicas de intensificação de troca de calor, sendo que a utilização de fitas retorcidas é uma das técnicas mais adotadas. Fitas retorcidas são utilizadas como técnicas de intensificação de troca de calor há mais de um século. Entretanto o incremento da transferência de calor é acompanhado do aumento da perda de pressão, que por sua vez implica em aumento da potência de bombeamento, e consequentemente afeta a eficiência global do sistema. Adicionalmente, até os dias de hoje não há consenso sobre as condições operacionais em que o ganho com o incremento do coeficiente de transferência de calor é superior à perda devido ao aumento da perda de pressão. Neste estudo, inicialmente foi realizada uma extensa revisão da literatura sobre a ebulição convectiva no interior de tubos com e sem fitas retorcidas. Esta revisão aborda aspectos relacionados à perda de pressão e ao coeficiente de transferência de calor, juntamente com os métodos de previsão destes parâmetros. Foram realizados experimentos para determinação experimental de perda de pressão e coeficiente de transferência de calor, em aparato experimental contando com tubos horizontais com diâmetros internos iguais a 12,7 e 15,9 mm, para escoamento bifásico de R134a, razões de retorcimento iguais a 3, 4, 9, 14 e tubo sem fita, velocidades mássicas entre 75 e 200 kg/m²s, temperaturas de saturação iguais a 5 e 15°C, e fluxo de calor iguais a 5 e 10 kW/m². Os resultados experimentais foram analisados e comparados com estimativas segundo métodos disponíveis na literatura. Uma análise do aumento do coeficiente de transferência de calor e da perda de pressão friccional é apresentada. Foram verificados incrementos do coeficiente de transferência de calor de até 45% para a mesma potência de bombeamento, e aumento de perda de pressão de aproximadamente 35% para tubos com fitas retorcidas em relação aos tubos sem fita. Adicionalmente, através da comparação dos resultados experimentais com os métodos de previsão para coeficiente de transferência de calor, foi verificado que nenhuma metodologia apresentava previsões satisfatórias dos resultados. Portanto um novo método para previsão do coeficiente de transferência de calor durante ebulição convectiva no interior de tubos com fitas retorcidas foi desenvolvido com base nos resultados experimentais obtidos durante o presente estudo. O método proposto é função de parâmetros geométricos e do escoamento, e também de parâmetros físicos do escoamento rotacional induzido pela fita. A metodologia desenvolvida apresenta previsões satisfatórias dos resultados experimentais, prevendo 89,1% dos resultados experimentais com erro inferior a ± 30% e erro médio absoluto igual a 15,7%.

Nous avons abordé dans ce travail deux aspects particuliers de la mécanique des fluides appliquées à la conception des matériels de lutte contre l’incendie. Le premier concerne la ventilation lors du traitement des compartiments. Nous avons montré qu’une grille alvéolaire, placée devant l’hélice du ventilateur, nous permet de façonner le jet et de lui donner une forme ovalisée. Cette forme est plus adéquate à l’entrant du compartiment et permet un gain important de la performance de ces ventilateurs. Le deuxième aspect de ce travail a été de concevoir un système de dosage d’émulseur dans un réseau d’eau sous pression. Nous avons pour cela défini un doseur de type venturi, équipé d’une ogive conique au niveau du col. Cette ogive, dont la position est définie par le rapport entre la pression d’entrée et la pression de sortie. Nous avons montré, à partir du théorème de Bernoulli, que ce système permet de maintenir une aspiration au niveau du col, quelle que soit la pression ou le débit le traversant. / In this work we have analysed two topics of fluid mechanics, applied to the design of fire fighting equipment. The first one is the performance of ventilation during the movement of air in a compartment that contains a fire. We have shown that specific blade angle designed within the gril and placed in front of the fan propeller, allows us to manipulate the jet of air giving it an oval shape. This shape is more efficient and allows a significant gain in the air movement performance within the compartment for these fans. The second aspect of this work was to define an emulsifier dosing system in a pressurized water system. We define a venturi dosing system with a movable cone piece. The position of this conical piece is Controlled by the pressure ratio between the inlet and the outlet. Based on Bernoulli's theorem, we have demontrated that this system maintains a level of suction at the Inlet regardless of the pressure or flow passing through it.