Indiana University-Purdue University Indianapolis (IUPUI) / The aim of this study was to use multivariate statistical techniques to: (1) determine the reproducibility of fiber evidence analyzed by MSP, (2) determine whether XRF is an appropriate technique for forensic tape analysis, and (3) determine if DART/MS is an appropriate technique for forensic tape analysis. This was achieved by employing several multivariate statistical techniques including agglomerative hierarchical clustering, principal component analysis, discriminant analysis, and analysis of variance. First, twelve dyed textile fibers were analyzed by UV-Visible MSP. This analysis included an inter-laboratory study, external validations, differing preprocessing techniques, and color coordinates. The inter-laboratory study showed no statistically significant difference between the different instruments. The external validations had overall acceptable results. Using first derivatives as a preprocessing technique and color coordinates to define color did not result in any additional information. Next, the tape backings of thirty-three brands were analyzed by XRF. After chemometric analysis it was concluded that the 3M tapes with black adhesive can be classified by brand except for Super 33+ (Cold Weather) and Super 88. The colorless adhesive tapes were separated into two large groups which were correlated with the presence of aluminosilicate filler. Overall, no additional discrimination was seen by using XRF compared to the traditional instrumentation for tape analysis previously published. Lastly, the backings of eighty-nine brands of tape were analyzed by DART/MS. The analysis of the black adhesive tapes showed that again discrimination between brands is possible except for Super 33+ and Super 88. However, now Tartan and Temflex have become indistinguishable. The colorless adhesive tapes again were more or less indistinguishable from one another with the exception of Tuff Hand Tool, Qualpack, and a roll of 3M Tartan, which were found to be unique. It cannot be determined if additional discrimination was achieved with DART/MS because the multivariate statistical techniques have not been applied to the other instrumental techniques used during tape analysis.

This dissertation represents an interpretation of the different forms of negativity in the modernist work that can be understood in terms of that which is unsaid, unsayable, or any other means of refusing to give an affirmative proposition regarding the world the work describes. It explores this negativity as both a representation of that which cannot be represented, and as an operational negativity, or negation, that takes part in the unmaking of the work's figures. The function of this negativity, as interpreted in Marcel Proust's Remembrance of Things Past (1913-1927), James Joyce's Ulysses (1922) and Krapp's Last Tape (1959) by Samuel Beckett, is to rewrite the representations of the work. Negativity is then also understood as a transformation and conditioning of elements already present in the literary work, that lead to ambivalent and problematic representations in the work. In this sense, negativity can be understood as a form of rewriting of the work's representations. The interpretations of the works of Proust, Joyce and Beckett are guided by this understanding, as given in the introduction, of negativity. In the analysis of Proust's novel, in "The Unmaking of Proust: Negation and Errors in Remembrance of Things Past", this form of negativity is situated in relation to Proust's handling of epistemological questions and mimetic references to reality in his work. The analysis of Joyce's work in "The Wandering of Language in James Joyce's Ulysses" discusses his treatment of language and the origins of language as being characterized by a negation that increases the difficulty of the language, and attempts to negate its origins. Finally, in the analysis of Beckett's "Krapp's Last Tape", in "Beckett, Proust, and the End of Literature", it is shown that negativity conditions both the reception of the influence of Proust by Beckett, and the play's attempt to suggest the end of writing. In conclusion the dissertation returns to the idea of negativity as a form of rewriting, and briefly indicates that the function of negativity in these novels can be understood as a form of invention. / Thesis (M.A.)--Potchefstroom University for Christian Higher Education, 2000.

This dissertation represents an interpretation of the different forms of negativity in the modernist work that can be understood in terms of that which is unsaid, unsayable, or any other means of refusing to give an affirmative proposition regarding the world the work describes. It explores this negativity as both a representation of that which cannot be represented, and as an operational negativity, or negation, that takes part in the unmaking of the work's figures. The function of this negativity, as interpreted in Marcel Proust's Remembrance of Things Past (1913-1927), James Joyce's Ulysses (1922) and Krapp's Last Tape (1959) by Samuel Beckett, is to rewrite the representations of the work. Negativity is then also understood as a transformation and conditioning of elements already present in the literary work, that lead to ambivalent and problematic representations in the work. In this sense, negativity can be understood as a form of rewriting of the work's representations. The interpretations of the works of Proust, Joyce and Beckett are guided by this understanding, as given in the introduction, of negativity. In the analysis of Proust's novel, in "The Unmaking of Proust: Negation and Errors in Remembrance of Things Past", this form of negativity is situated in relation to Proust's handling of epistemological questions and mimetic references to reality in his work. The analysis of Joyce's work in "The Wandering of Language in James Joyce's Ulysses" discusses his treatment of language and the origins of language as being characterized by a negation that increases the difficulty of the language, and attempts to negate its origins. Finally, in the analysis of Beckett's "Krapp's Last Tape", in "Beckett, Proust, and the End of Literature", it is shown that negativity conditions both the reception of the influence of Proust by Beckett, and the play's attempt to suggest the end of writing. In conclusion the dissertation returns to the idea of negativity as a form of rewriting, and briefly indicates that the function of negativity in these novels can be understood as a form of invention. / Thesis (M.A.)--Potchefstroom University for Christian Higher Education, 2000.

Thesis (MScEng (Mechanical and Mechatronic Engineering))--University of Stellenbosch, 2008. / A rapid measurement system is implemented using two digital video cameras, presenting a faster and less expensive solution to certain metrology problems. The cameras are calibrated from one stereo image-pair of a 3D calibration grid that allows an immediate assessment of the achievable metric accuracy of the system. Three different methods, using either laser tracking or structured light patterns, were developed and employed to solve the coordinate extraction and correspondence matching problems. Different image processing techniques were used to speed up the entire measurement process. All software development was accomplished using only freely distributed software packages. The system achieves calibration in less than a minute and accumulates point correspondences at 12 frames per second. Accuracies of greater than 0.4 mm are achieved for a 235 x 190 x 95 mm measurement volume using a single pair of images with 640 x 480 pixel resolution each.

International Telemetering Conference Proceedings / October 23-26, 2000 / Town & Country Hotel and Conference Center, San Diego, California / For the last 30 years Magnetic Tape Systems have been the primary means of recording data from airborne instrumentation systems. Increasing data rates and harsh environmental requirements have often exceeded the ability of tape-based systems to keep pace with technology. Throughout this time data recordings have been made mostly with analog longitudinal systems and most recently with digital recording systems that record on commercial DLT, and super VHS tape media. The recordings are played back with the same type of tape device allowing for the data to be processed and/or archived. Since not all data reduction facilities can process the same type of tape media, often tapes are dubbed from one type of tape media format to another, corrupting the translated data. This paper examines operational and data reduction benefits, and life cycle cost of Solid State Recorders as a replacement for existing airborne tape recorders.

International Telemetering Conference Proceedings / October 22-25, 2001 / Riviera Hotel and Convention Center, Las Vegas, Nevada / There are clear signs that data recorders using solid-state and disk-based technologies now represent a serious alternative to conventional linear and rotary tape recorders for a broad spectrum of data capture applications. As the number of RFQs specifying these so-called ‘new technology’ solutions increases, virtually every major manufacturer has responded with announcements of new off-the-shelf products. A NATO technical support team has even been tasked with drafting standards for certain aspects of solid-state and disk recorders. But what has caused this sudden explosion of interest? Strange to say, in almost every case it has been the perceived shortcomings of the new technologies which have forced the issue. For all their advantages, solid-state and disk recorders are essentially only temporary storage devices. To overcome this problem manufacturers have found it necessary to address the total data capture/storage/distribution/archiving scenario – with some interesting results. It is in the ‘data handling’ area therefore that some of the most significant advances are to be found. This Paper offers an overview of some of the new technology solutions now available - RAID (Redundant Arrays of Independent Disks), JBOD (Just a Bunch Of Disks) and FLASH memory recorders. New paradigms for airborne, mobile and laboratory data collection, handling, analysis and archiving are discussed, demonstrating that (for once) the migration path has been carefully thought through, with industry-standard data interfaces, true computer connectivity (Windows and UNIX) and familiar control techniques. It concludes that many users with a keen interest in replacing legacy products for whatever reason can now do so with confidence and minimal disruption to their day-to-day operation while nevertheless gaining access to the important benefits which ‘new technology’ solutions can offer.

No description available.

The purpose of this project was to describe a novel design approach for a digital computer peripheral controller, then design and construct a case study controller. This document consists of three chapters and an appendix. Chapter II presents the design approach chosen; a variation to a design presented by Charles R. Richards in an article published in Electronics magazine. Richards' approach consists of a finite state machine circuitry controlling all the functions of a controller. The variation to Richards' approach consists of considering the various logically independent processes which a controller carries out and assigning control of each process to a separate finite state machine. The appendix contains the documentation of the design and construction of the controller.

New media technologies are changing the ways that we not only go about our day-to-day lives, but also the ways that we sell and exchange our labor within the capitalist economy. These technologies are shaping how we represent and perceive ourselves and others, as well as the ways in which, as we move about the world, our images are taken and circulated with neither our explicit permission, nor sometimes our knowledge (Dovey, 2000; Toffoletti, 2007). Despite the fact that we can no longer viably opt out of visual or technological culture, there remains a strong rhetoric of personal responsibility when such images are used in ways that are unexpected and sometimes extremely damaging (C. Hall, 2015). The growth in incidences of what Clare McGlynn (2017) calls “image-based sexual violence” cannot be divorced from the economic and cultural shifts that are both challenging and reifying dominant power relations in the early 21st century. This doctoral thesis examines the economic and social discourses underpinning news reporting on sexual privacy violations in relation to new media technologies and shifting forms of female celebrity. Using empirical methods to collect and sort U.S. and Canadian news articles at a macro level as well as discourse analysis of news reporting at the micro level, I focus on two particular sites wherein new media celebrity, sexual violence/violation, and political economies converge: the celebrity sex tape scandal and the stolen celebrity nude photo. I examine sexuality and privacy violation in an exemplary economic context, looking at how the “leaked” sex tape or image functions in the gendered sexual economy to undermine claims to meritocratic capitalist success. I focus on two moments of crisis: firstly, the pop culture crisis of 2007-2008, coinciding with the global economic recession as well as the growth in new media technology and social media usage, wherein several high-profile female celebrities undergo dramatic and very public “breakdowns” in proper femininity, ranging from the fairly banal “scandal” surrounding a then-15-year-old Miley Cyrus posing semi-nude for Vanity Fair to the more severe and illegal acts of Lindsay Lohan and Paris Hilton (both of whom were arrested for driving under the influence across this time period). Secondly, I examine the moment of crisis signaled by the 2014 iCloud hacking incident wherein hundreds of female celebrities’ personal private nude photos were stolen and circulated online. I analyze the sex “scandals” that are both discursively constructed by, and circulating through, the news at these moments. The findings point to several notable trends in the contemporary political climate. Firstly, they illuminate the tensions and contradictions in the media’s attempt to reconcile post-feminist sexual “empowerment” narratives with the broader imperatives of neoliberalism, surveillance, and self-commodification. Secondly, this thesis provides a timely analysis of the gendered pathways to success and the gatekeeping that is conducted both within and by the (news) media, which are themselves invested in narratives of meritocracy. Finally, the cynical, meta-commentary circulating in the news reporting on celebrity content – reporting that is increasingly beholden to corporate interests – contributes to the broader erosion of trust in mainstream media. In today’s media environment in particular, studies of heirs-turned-reality stars such as Paris Hilton (whose trajectory is eerily similar to that of U.S. President Donald Trump), are particularly urgent, as are studies that connect the seemingly disparate yet increasingly converging fields of celebrity, journalism, feminism (and sexual violence), and neoliberalism.

A presente dissertação trata de um estudo teórico-experimental sobre escoamento monofásico e bifásico no interior de tubos com fitas retorcidas. Esta técnica tem sido utilizada há várias décadas para a intensificação de troca de calor para escoamento monofásico e evaporação convectiva no interior de tubos. No entanto, com sua utilização, o aumento do coeficiente de troca de calor é acompanhado pelo incremento da perda de pressão. Portanto a compreensão dos fenômenos relacionados aos incrementos da perda de pressão e troca de calor são fundamentais para engenheiros projetistas. Neste estudo, inicialmente, é apresentada uma extensa revisão bibliográfica sobre padrões de escoamento, modelos para estimativa de fração de vazio e metodologias para previsão da perda de pressão em tubos com e sem fitas retorcidas para escoamentos bifásicos e monofásicos. Foram realizados experimentos em bancada experimental utilizando seção de testes com diâmetro interno de 15,9 mm e dois metros de comprimento com fitas apresentando razões de retorcimento de 3, 4, 9, 14 e , a última correspondente ao tubo sem inserto. Os experimentos foram executados para o refrigerante R134a, velocidades mássicas entre 75 e 250 kg/m²s, e títulos de vapor entre 5 e 95% no caso de escoamentos bifásicos. Resultados foram levantados para velocidades mássicas entre 100 e 450 kg/m²s para escoamentos monofásicos. Durante os ensaios foram levantados resultados de perda de pressão e identificados subjetivamente os respectivos padrões de escoamento. Como resultado final deste estudo é proposta uma correlação para previsão da perda de pressão durante o escoamento no interior de tubos com fitas retorcidas. / A theoretical and experimental study on single and two-phase flow inside tubes with twisted tapes inserts is presented. Twisted tape inserts have been used for decades as a technique of heat transfer enhancement. However, their heat transfer enhancement is accompanied by an increase of the pressure drop. Therefore, understanding the pressure drop and heat transfer mechanisms is fundamental for heat exchanger designers in order to optimize these devices when using twisted-tape inserts. Based on these aspects the present study concerns single and two-phase flows inside tubes with twisted tapes. Experiments were performed in an experimental apparatus for a 15.9 mm ID and twisted tape with twist ratios of 3, 4, 9, 14 and , the last one corresponding to a plain tube without tape. For two-phase flow, experiments were conducted for R134a, mass velocities from 75 to 250 kg/m²s and vapor qualities from 5 to 95%. In case of single-phase flow, experiments were performed for mass velocities from 100 to 450 kg/m²s. The experimental campaign was focused on pressure drop and flow pattern subjective identification. Additionally an extensive literature review on flow patterns, superficial void fraction, and methodologies for prediction of the pressure drop in plain tubes with and without twisted-tape inserts during single and two-phase flow is presented. As final result, a correlation for prediction of pressure drop during flow inside tubes with twisted tape inserts is proposed.