Traffic load model in standard or specification for bridge design should guarantee all newly designed bridges to have sufficient security margin for future traffic. Many different methods have been used to model extreme traffic load effects on bridges for predicting characteristic value for short or long return period. In order to provide some guidance on selecting parameter estimation when applying POT to bridge traffic loading, we focus on the effect that method used to estimate the parameters of the GPD has on the accuracy of the estimated characteristic values. Through this qualitative discussion on the methods, several available methods for traffic loading are selected. Numerical simulation data, Monte Carlo simulation traffic load effects and in-field traffic load effect measurements are analyzed and presented. Literature points out that the traffic load effect is induced by loading event that involves different number of vehicles, and the distribution of the load effects from different loading events are not identically distributed, which violates the assumption of classic extreme value theory that the underlying distribution should be identically independent distributed. Methods using mixture distribution (exponential or generalized extreme value) has been proposed in the literature to model the extreme traffic load effect by loading event. However, the traffic loading may be also importance if the bridge encounter traffic induced fatigue problem, components like orthotropic steel deck is governed by traffic induced fatigue load effects. We intend to explore the influence of traffic load on the fatigue behaviour of orthotropic steel deck, especially the influence of the loading position in terms of transverse location of vehicle. Measurements of transverse location of vehicle collected from by weigh-in-motion (WIM) systems in 2010 and 2011 four French highways showed a completely different distribution model of transverse location of vehicle to that recommended in EC1. Stress spectrum analysis and fatigue damage calculation was performed on the stresses induced traffic on orthotropic steel deck of Millau cable-stayed bridge. By comparing the stresses and damages induced by different traffic patterns (through distributions of transverse location of vehicle), it was found that the histogram of stress spectrum and cumulative fatigue damage were significantly affected by the distribution of transverse location of vehicle. Therefore, numerical analysis that integrates finite element modelling and traffic data with distributions of transverse location of vehicles can help to make an accurate predetermination of which welded connections should be sampled to represent the health of the deck

A caracterização das cargas do tráfego é de grande importância para o dimensionamento de pavimentos, bem como para a quantificação do desempenho para fins de gerência de pavimentos. A utilização de abordagens empíricas para determinar os efeitos das cargas do tráfego nas estruturas de pavimentos, datadas dos anos 1960, apresentam sérias limitações, pois seus resultados são válidos somente para os mesmos, ou muito similares, fatores intervenientes que prevaleciam quando do seu desenvolvimento. Os fatores relativos às solicitações do tráfego e às características dos veículos (tipo de eixo, tipo de rodagem, pressão de enchimento dos pneus e tipo de suspensão) são bem diferentes, atualmente, daquelas existentes há 50 anos. Tendo em vista que os modelos de desempenho são importantes ferramentas dos sistemas de gerência de pavimentos (SGP) para prever a evolução da condição ao longo do tempo e/ou tráfego acumulado e, portanto, dependentes de uma consistente caracterização do tráfego, o objetivo desta pesquisa foi analisar os efeitos da caracterização do tráfego sobre o desempenho dos pavimentos, a partir da geração de modelos estatísticos baseados no conceito proposto pelo método da AASHTO 2002, de espectros de carga por eixo dos veículos comerciais de carga, comparando-os com o conceito de equivalência de carga, desenvolvido a partir do AASHO Road Test na década de 1950. Dados de pesagens realizadas no ano de 2008 no Posto de Pesagem de Veículos da SP-160 Rodovia dos Imigrantes, km 28, pista Sul, foram utilizados para o desenvolvimento dos espectros de carga e posterior modelagem. Testes estatísticos e práticos foram realizados para determinar a variabilidade mensal dos Fatores de Veículos (FV) em relação ao valor médio do ano de 2008. Apesar da análise estatística com a aplicação do teste Kolmogorov-Smirnov (K-S) ter apresentado diferenças significativas entre os espectros mensais e anuais, a variação observada nos fatores de tráfego não resultou em diferenças práticas na espessura final do pavimento. Os modelos estatísticos foram desenvolvidos separadamente para cada classe de veículo e de eixos que o compunha, tendo sido usadas distribuições de probabilidade Log-normal e Weibull para modelar os espectros de carga. Os parâmetros dos modelos foram obtidos através do método dos mínimos quadrados, complementado com a realização de testes K-S e Qui-quadrado, destacando-se a obtenção de coeficientes de determinação (R2) superiores a 0,90. A comparação entre os resultados previstos pelos modelos e os dados originais, feita tanto pela abordagem empírica como empírico-mecanística, com uso dos programas computacionais ELSYM5 e MEPDG, evidencia o modelo Weibull como o mais indicado para aplicação em rodovias brasileiras com características de tráfego semelhantes às da Rodovia dos Imigrantes. / The characterization of traffic loads is of great importance for pavement design, as well as for the measurement of performance in a pavement management system. The use of empirical approaches to determine the effects of traffic load on pavement structures, dating from the 1960\'s, presents serious limitations, since its results are just valid for the same or very similar intervening factors that prevailed at the time of its development. The traffic load factors and vehicle characteristics (axle type, tire type, tire inflation pressure, and suspension type) are quite different today from those existing 50 years ago. Given that the performance models are important tools of pavement management systems (PMS) to predict the evolution of pavement condition over time and/or accumulated traffic and therefore dependent on a consistent characterization of the traffic, the objective of this research was to analyze the effects of traffic characteristics on pavement performance through the generation of statistical models based on the concept proposed by the AASHTO 2002 method, axle load spectra of commercial vehicles, comparing them with the concept of load equivalence factor, developed through the AASHO Road Test in the 1950s. Data collected in 2008 in a weighing station located on Immigrant Highway - SP-160, km 28, southern runway, were used for the development of load spectra and subsequent modeling. Practical and statistical tests were performed to determine the variability of monthly vehicle-factors (FV) to the mean value for the year 2008. Despite the statistical analysis, performed by applying the Kolmogorov-Smirnov (KS) test, have shown significant differences between the monthly and annual spectra variation, there were not practical differences in the final thickness of the pavement associated to changes in vehicle-factors. Statistical models were developed for each vehicle class and for its axles, having been used Log-normal and Weibull probability distributions to model the load spectra. The model parameters were obtained from the method of least squares, complemented by the KS and chi-square tests, being important to mention that the coefficients of determination (R2) were greater than 0.90. The comparison between the results predicted by the models and the original data, made either by empirical and empiricalmechanistic approaches, with use of computer programs ELSYM5 and MEPDG, shows that the Weibull model is the most suitable for application in Brazilian highways with similar traffic characteristics to the Immigrants Highway.

The mobile traffic in cellular networks is increasing in a steady rate as we go intoa future where we are connected to the internet practically all the time in one wayor another. To map the mobile traffic and the volume pressure on the base stationduring different time periods, it is useful to have the ability to predict the trafficvolumes within cellular networks. The data in this work consists of 4G cellular trafficdata spanning over a 7 day coherent period, collected from cells in a moderately largecity. The proposed method in this work is ARIMA modeling, in both original formand with an extension where the coefficients of the ARIMA model are re-esimated byintroducing some user characteristic variables. The re-estimated coefficients produceslightly lower forecast errors in general than a isolated ARIMA model where thevolume forecasts only depends on time. This implies that the forecasts can besomewhat improved when we allow the influence of these variables to be a part ofthe model, and not only the time series itself.

A caracterização das cargas do tráfego é de grande importância para o dimensionamento de pavimentos, bem como para a quantificação do desempenho para fins de gerência de pavimentos. A utilização de abordagens empíricas para determinar os efeitos das cargas do tráfego nas estruturas de pavimentos, datadas dos anos 1960, apresentam sérias limitações, pois seus resultados são válidos somente para os mesmos, ou muito similares, fatores intervenientes que prevaleciam quando do seu desenvolvimento. Os fatores relativos às solicitações do tráfego e às características dos veículos (tipo de eixo, tipo de rodagem, pressão de enchimento dos pneus e tipo de suspensão) são bem diferentes, atualmente, daquelas existentes há 50 anos. Tendo em vista que os modelos de desempenho são importantes ferramentas dos sistemas de gerência de pavimentos (SGP) para prever a evolução da condição ao longo do tempo e/ou tráfego acumulado e, portanto, dependentes de uma consistente caracterização do tráfego, o objetivo desta pesquisa foi analisar os efeitos da caracterização do tráfego sobre o desempenho dos pavimentos, a partir da geração de modelos estatísticos baseados no conceito proposto pelo método da AASHTO 2002, de espectros de carga por eixo dos veículos comerciais de carga, comparando-os com o conceito de equivalência de carga, desenvolvido a partir do AASHO Road Test na década de 1950. Dados de pesagens realizadas no ano de 2008 no Posto de Pesagem de Veículos da SP-160 Rodovia dos Imigrantes, km 28, pista Sul, foram utilizados para o desenvolvimento dos espectros de carga e posterior modelagem. Testes estatísticos e práticos foram realizados para determinar a variabilidade mensal dos Fatores de Veículos (FV) em relação ao valor médio do ano de 2008. Apesar da análise estatística com a aplicação do teste Kolmogorov-Smirnov (K-S) ter apresentado diferenças significativas entre os espectros mensais e anuais, a variação observada nos fatores de tráfego não resultou em diferenças práticas na espessura final do pavimento. Os modelos estatísticos foram desenvolvidos separadamente para cada classe de veículo e de eixos que o compunha, tendo sido usadas distribuições de probabilidade Log-normal e Weibull para modelar os espectros de carga. Os parâmetros dos modelos foram obtidos através do método dos mínimos quadrados, complementado com a realização de testes K-S e Qui-quadrado, destacando-se a obtenção de coeficientes de determinação (R2) superiores a 0,90. A comparação entre os resultados previstos pelos modelos e os dados originais, feita tanto pela abordagem empírica como empírico-mecanística, com uso dos programas computacionais ELSYM5 e MEPDG, evidencia o modelo Weibull como o mais indicado para aplicação em rodovias brasileiras com características de tráfego semelhantes às da Rodovia dos Imigrantes. / The characterization of traffic loads is of great importance for pavement design, as well as for the measurement of performance in a pavement management system. The use of empirical approaches to determine the effects of traffic load on pavement structures, dating from the 1960\'s, presents serious limitations, since its results are just valid for the same or very similar intervening factors that prevailed at the time of its development. The traffic load factors and vehicle characteristics (axle type, tire type, tire inflation pressure, and suspension type) are quite different today from those existing 50 years ago. Given that the performance models are important tools of pavement management systems (PMS) to predict the evolution of pavement condition over time and/or accumulated traffic and therefore dependent on a consistent characterization of the traffic, the objective of this research was to analyze the effects of traffic characteristics on pavement performance through the generation of statistical models based on the concept proposed by the AASHTO 2002 method, axle load spectra of commercial vehicles, comparing them with the concept of load equivalence factor, developed through the AASHO Road Test in the 1950s. Data collected in 2008 in a weighing station located on Immigrant Highway - SP-160, km 28, southern runway, were used for the development of load spectra and subsequent modeling. Practical and statistical tests were performed to determine the variability of monthly vehicle-factors (FV) to the mean value for the year 2008. Despite the statistical analysis, performed by applying the Kolmogorov-Smirnov (KS) test, have shown significant differences between the monthly and annual spectra variation, there were not practical differences in the final thickness of the pavement associated to changes in vehicle-factors. Statistical models were developed for each vehicle class and for its axles, having been used Log-normal and Weibull probability distributions to model the load spectra. The model parameters were obtained from the method of least squares, complemented by the KS and chi-square tests, being important to mention that the coefficients of determination (R2) were greater than 0.90. The comparison between the results predicted by the models and the original data, made either by empirical and empiricalmechanistic approaches, with use of computer programs ELSYM5 and MEPDG, shows that the Weibull model is the most suitable for application in Brazilian highways with similar traffic characteristics to the Immigrants Highway.

Inter-cell interference coordination in 3GPP Long Term Evolution system received much attention in recent years. However, most of the studies are based on ideal system with regular hexagon-shaped cell. The indoor environment has special characteristics that the building shape and BS locations are irregular; the traffic load has great variation compared to urban and rural area. So, conventional ICIC scheme may not be used in indoor situation directly. In this thesis, ICIC scheme is employed for indoor environment. Based on different quality of backhaul, static and dynamic schemes will be proposed. The performances of proposed schemes and the performance of system without ICIC will be simulated and compared. At last, how much the improvement of the system can acquire after applying ICIC schemes will be analyzed, and the question about whether it is good to apply ICIC scheme in indoor environment will be answered.

Pour les ouvrages neufs, les modèles de trafic dans les normes ou les législations pour la conception des ponts incluent une marge de sécurité suffisante pour que la croissance du trafic soit prise en compte sans dommage par ces ouvrages. Les fondements et les utilisations faites de ces méthodes pour modéliser les effets extrêmes du trafic sur les ouvrages sont donnés dans un premier chapitre. Différentes méthodes sont ainsi étudiées, telles la méthode des moments (MM), la méthode des moments à poids (PWM), le maximum de vraisemblance (ML), le maximum de vraisemblance pénalisé (PML), le minimum de la densité de la divergence (MDPD), la méthode des fractiles empiriques (EPM), la statistique du maximum d'adaptation et la vraisemblance des moments (LM). Pour comparer ces méthodes, des échantillons numériques, des effets de trafic simulés par Monte Carlo et des effets mesurés sur un ouvrage réel sont utilisés. Pour des effets du trafic simulés, ML et PML donne des valeurs de retour plus correctes lorsque le nombre de valeurs au-dessus du seuil est supérieur à 100 ; Des méthodes permettant de prendre en compte ce point et utilisant des distributions mélangées (exponentielles ou valeurs extrêmes généralisées) ont été proposées dans la littérature pour modéliser les effets du trafic. Pour des ponts ayant des portées supérieures à 50m, le scénario déterminant est celui de la congestion, qui n'est pas ce qui est étudié ici. De plus, le trafic n'est pas la composante déterminante pour la conception des ponts de longue portée. Mais des problèmes de fatigue peuvent apparaître dans certains ponts, tels les ponts métalliques à dalle orthotrope, où l'étude du trafic peut devenir nécessaire. Ainsi nous avons fait une étude de l'influence de la position des véhicules sur le phénomène de fatigue. Pour cela, quatre fichiers de trafic réels, mesurés en 2010 et 2011 par quatre stations de pesage différentes, ont été utilisés. Ils ont mis à jour des comportements latéraux différents d'une station à l'autre. Si nous les appliquons au viaduc de Millau, qui est un pont métallique à haubans et à dalle orthotrope, nous voyons que l'histogramme des effets et l'effet de fatigue cumulé est beaucoup affecté par le comportement latéral des véhicules. Ainsi, des études approfondies utilisant les éléments finis pour modéliser les ouvrages et des enregistrements de trafic réel, peuvent être utilisées pour pré-déterminer quels éléments, donc quelles soudures, doivent être examinés dans les ponts afin d'estimer leur santé structurelle / Traffic load model in standard or specification for bridge design should guarantee all newly designed bridges to have sufficient security margin for future traffic. Many different methods have been used to model extreme traffic load effects on bridges for predicting characteristic value for short or long return period. In order to provide some guidance on selecting parameter estimation when applying POT to bridge traffic loading, we focus on the effect that method used to estimate the parameters of the GPD has on the accuracy of the estimated characteristic values. Through this qualitative discussion on the methods, several available methods for traffic loading are selected. Numerical simulation data, Monte Carlo simulation traffic load effects and in-field traffic load effect measurements are analyzed and presented. Literature points out that the traffic load effect is induced by loading event that involves different number of vehicles, and the distribution of the load effects from different loading events are not identically distributed, which violates the assumption of classic extreme value theory that the underlying distribution should be identically independent distributed. Methods using mixture distribution (exponential or generalized extreme value) has been proposed in the literature to model the extreme traffic load effect by loading event. However, the traffic loading may be also importance if the bridge encounter traffic induced fatigue problem, components like orthotropic steel deck is governed by traffic induced fatigue load effects. We intend to explore the influence of traffic load on the fatigue behaviour of orthotropic steel deck, especially the influence of the loading position in terms of transverse location of vehicle. Measurements of transverse location of vehicle collected from by weigh-in-motion (WIM) systems in 2010 and 2011 four French highways showed a completely different distribution model of transverse location of vehicle to that recommended in EC1. Stress spectrum analysis and fatigue damage calculation was performed on the stresses induced traffic on orthotropic steel deck of Millau cable-stayed bridge. By comparing the stresses and damages induced by different traffic patterns (through distributions of transverse location of vehicle), it was found that the histogram of stress spectrum and cumulative fatigue damage were significantly affected by the distribution of transverse location of vehicle. Therefore, numerical analysis that integrates finite element modelling and traffic data with distributions of transverse location of vehicles can help to make an accurate predetermination of which welded connections should be sampled to represent the health of the deck

Στην εργασία αυτή γίνεται μια αναφορά αρχικά στα GSM δίκτυα κινητής τηλεφωνίας (χαρακτηριστικά-λειτουργίες). Στη συνέχεια περιγράφεται ο τρόπος υπολογισμού της κυτταρικής ακτίνας με βάση τα μοντέλα Okumura-Hata και Ikegami. Τέλος αναφέρονται παραδείγματα υπολογισμού της ακτίνας των κυττάρων αλλά και διαστασιοποίησης των καναλιών σε αυτά ώστε να εξυπηρετείται συγκεκριμένη τηλεπικοινωνιακή κίνηση. / The purpose of this project is to examine the major steps in cell planning process such as cell coverage, frequency planning and calculations of traffic and channel needs for the given areas.

This diploma thesis deals with a proposal and a comparison of several options of transportation planning in the shopping area in the urban area of the town of Modřice, which is enlarging due to the building-up of new commercial centres. The first part of the thesis consists of a treatise on the field of traffic engineering, road-traffic telematics and ITS. The core of the work is formed by a detailed analysis of the current state and calibration of the transport simulation system AIMSUN. The following part shows three different ways of transportation in the given area and all of them include a model of the particular area made in the program AIMSUN and an elaborate analysis of the proposed solution. In the last part of the work all the proposed solutions are compared according to the results gained from the AIMSUN model.

The aim of diploma thesis was to design alternative of composite road bridge in Trenčín. The bridge beam is designed as continuous with theoretical span of 65 m + 106 m + 65 m. Permanent load, climatic load (uniform and nonuniform temperature variation, windload), shrinkage, differential settlement and traffic load were taken into consideration according to Eurocodes. Technical report, static report, drawings, bill of quantities are included. Computational model for evaluation of internal forces was carried out in SCIA Engineer software.

Ein großer Anteil des Datenverkehrs in „Internet Service Provider“ (ISP)-Netzen wird heutzutage von „Content Delivery Networks“ (CDNs) verursacht. Betreiber von CDNs verwenden Lastverteilungsmechanismen um die Auslastung ihrer CDN-Infrastruktur zu vergleichmäßigen (Load Balancing). Dies geschieht ohne Abstimmung mit den ISP-Betreibern. Es können daher große Verkehrslastverschiebungen sowohl innerhalb eines ISP-Netzes, als auch auf den Verbindungsleitungen zwischen ISP-Netz und CDNs auftreten. In der vorliegenden Arbeit wird untersucht, welche nicht-kooperativen Möglichkeiten ein ISP hat, um Verkehrslastverschiebungen, welche durch Lastverteilungsmechanismen innerhalb eines CDNs verursacht werden, entgegenzuwirken bzw. abzumildern. Die Grundlage für diese Untersuchung bildet die Analyse des Serverauswahlverhaltens des YouTube-CDNs. Hierzu ist ein aktives Messverfahren entwickelt worden, um das räumliche und zeitliche Verhalten der YouTube-Serverauswahl bestimmen zu können. In zwei Messstudien wird die Serverauswahl in deutschen und europäischen ISP-Netzen untersucht. Auf Basis dieser Studien wird ein Verkehrsmodell entwickelt, welches die durch Änderungen der YouTube-Serverauswahl verursachten Verkehrslastverschiebungen abbildet. Das Verkehrsmodell wiederum bildet die Grundlage für die Bestimmung optimaler Routen im ISP-Netz, welche hohe Robustheit gegenüber CDN-bedingte Verkehrslastverschiebungen aufweisen (Alpha-robuste Routingoptimierung). Für die Lösung des robusten Routing-Optimierungsproblems wird ein iteratives Verfahren entwickelt sowie eine kompakte Reformulierung vorgestellt. Die Leistungsfähigkeit des Alpha-robusten Routings wird anhand von drei Beispielnetztopologien untersucht. Das neue Verfahren wird mit alternativen robusten Routingverfahren und einem nicht-robusten Verfahren verglichen. Neben der robusten Routingoptimierung werden in der Arbeit drei weitere Ideen für nicht-kooperative Methoden vorgestellt (BGP-, IP-Präix- und DNS-basierte Methode), um CDN-bedingten Verkehrslastverschiebungen entgegenzuwirken.