This dissertation details the development and experimental implementation of single-photon atomic cooling. In this scheme atoms are transferred from a large-volume magnetic trap into a small-volume optical trap via a single spontaneous Raman transition that is driven near each atom's classical turning point. This arrangement removes nearly all of an atomic ensemble's kinetic energy in one dimension. This method does not rely on a transfer of momentum from photon to atom to cool. Rather, single-photon atomic cooling achieves a reduction in temperature and an increase in the phase-space density of an atomic ensemble by the direct reduction of the system's entropy. Presented here is the application of this technique to a sample of magnetically trapped ⁸⁷Rb. Transfer efficiencies between traps of up to 2.2% are demonstrated. It is shown that transfer efficiency can be traded for increased phase-space compression. By doing so, the phase-space density of a magnetically trapped ensemble is increased by a factor of 350 by the single-photon atomic cooling process. / text

The precision of mass measurements in a Penning trap is directly proportional to an ion's charge state and can be increased by using highly charged ions (HCI) from an Electron Beam Ion Trap (EBIT). By bombarding the injected and trapped singly charged ions with an intense electron beam, the charge state of the ions is rapidly increased. To use this method for short-lived isotopes, very high electron beam current densities are required of the TITAN EBIT, built and commissioned at the Max-Planck-Institute for Nuclear Physics in Heidelberg, Germany and transported to TRIUMF for the TITAN on-line facility. This EBIT has produced charge states as high as Kr34+ and Ba54+ with electron beams of up to 500 mA and 27 keV. Once the EBIT is operational at full capacity (5 A, 60 keV), most species can be bred into a He-like configuration within tens of ms.

The precision of mass measurements in a Penning trap is directly proportional to an ion's charge state and can be increased by using highly charged ions (HCI) from an Electron Beam Ion Trap (EBIT). By bombarding the injected and trapped singly charged ions with an intense electron beam, the charge state of the ions is rapidly increased. To use this method for short-lived isotopes, very high electron beam current densities are required of the TITAN EBIT, built and commissioned at the Max-Planck-Institute for Nuclear Physics in Heidelberg, Germany and transported to TRIUMF for the TITAN on-line facility. This EBIT has produced charge states as high as Kr34+ and Ba54+ with electron beams of up to 500 mA and 27 keV. Once the EBIT is operational at full capacity (5 A, 60 keV), most species can be bred into a He-like configuration within tens of ms.

Resumo: 1. As armadilhas convencionais são amplamente utilizadas em estudos com pequenos mamíferos não-voadores, mas geralmente acarretam um viés de amostragem. Além disso, efeitos da qualidade do microhabitat e da sazonalidade podem influenciar a estimativa da diversidade. 2. Nós comparamos dois métodos de amostragem de pequenos mamíferos: armadilhas de captura viva e de queda, sendo a riqueza de espécies e número de indivíduos variáveis resposta. Os levantamentos de campo foram realizados em uma área contínua de Mata Atlântica. Os efeitos das variáveis de microhabitat e da sazonalidade sobre capturabilidade também foram investigados. 3. As armadilhas de queda capturaram maior número de espécies e indivíduos durante a estação chuvosa, quando comparadas com armadilhas de captura viva. Portanto, as armadilhas de queda foram o melhor método para estimar a riqueza e abundância de pequenos mamíferos, principalmente de espécies semi-fossoriais. 4. Nossos resultados mostraram a importância de considerar o esforço amostral despendido em armadilhas de captura vida e de queda ao se comparar a eficiência de captura entre elas. O uso da abundância relativa resolveu problemas de sub e de superestimativa da capturabilidade em cada tipo de armadilha. 5. Embora o microhabitat seja considerado um importante fator que pode influenciar o número de indivíduos em determinada área de estudo, não encontramos influência do mesmo na capturabilidade de armadilhas de captura viva e de queda na comunidade de pequenos mamíferos. No entanto, verificamos que as estações de captura que apresentaram maior área basal de samambaias e de árvores mortas capturaram mais indivíduos de Brucepattersonius soricinus, Oligoryzomys nigripes e Akodon montensis. 6. Concluímos, portanto que a maioria dos inventários de pequenos mamíferos em regiões tropicais não conseguiu captar a riqueza... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: 1. Conventional traps are widely used in studies of non-volant small mammals, but usually lead to sampling bias. Also, microhabitat quality and seasonality effects may influence the estimate of diversity. 2. We compared two small mammal sampling methods: live and pitfall traps. Species richness and number of individuals were our response variables, and field surveys were carried out in a continuous area of the Brazilian Atlantic Forest. Effects of microhabitat variables and seasonality on trappability were also investigated. 3. Pitfall traps captured more number of species and more individuals during the wet season, when compared with live traps. Therefore, pitfall-traps were a better method for estimating the richness and abundance of small mammals, especially semi-fossorial species. 4. Our results showed the importance of considering the sampling effort dispended in live and pitfall traps when comparing the capture efficiency between them. The use of weighted abundance solved trappability problems of underestimation and overestimation in each trap type to capture small mammals. 5. Although the microhabitat is considered an important factor that can influence the number of individuals in the study area, we found no influence of microhabitat on trappability of live and pitfall traps on small mammal community. However, we found that the trap stations with higher basal area of dead trees and ferns captured more individuals of Brucepattersonius soricinus, Oligoryzomys nigripes, and Akodon montensis. 6. We conclude that most small mammal inventories in tropical regions failed to capture the true species richness. Several species considered "rare" and underlisted as data deficient in IUCN criterion could be in fact common / Orientador: Mauro Galetti / Coorientador: Maria José de Jesus Silva / Banca: Marco Aurélio Pizo Ferreira / Banca: Denis Cristiano Briani / Mestre

This thesis reports an optical dipole trap for atomic calcium. The dipole trap is loaded from a magneto-optical trap (MOT) of calcium atoms cooled near the Doppler limit (~1 mK). The dipole trap is formed by a large-frame argon ion laser focused to 20 microns into the center of the MOT. This laser runs single-line at 488 nm with a maximum power of 10.6 watts. These parameters result in a trap of 125 mK for calcium atoms in the 4s3d 1D2 state. The 488 nm light also photo-ionizes the trapped atoms due to a near-resonant transition to the 4s4f 1F3 level. These ions leave the trap and are detected to determine the trap decay rate. By measuring this decay rate as a function of 488 nm intensity, we determine the 1F3 photo-ionization cross section at this wavelength to be approximately 230 Mb.

Usando a técnica de resfriamento evaporativo para átomos comprimidos numa armadilha magnética tipo QUIC, implementamos experimentos para observar Condensação de Bose-Einstein de átomos de sódio. Nessa armadilha magnética temos átomos advindos de uma armadilha magneto-óptica, a qual é carregada por um feixe desacelerado como etapa de pré-resfriamento. Nossas medidas foram baseadas em imagens de absorção fora de ressonância de um feixe de prova pela amostra atômica. Essas imagens foram feitas in situ, ou seja, na presença do campo da armadilha magnética, pelo fato do número de átomos ser baixo e a técnica de tempo de vôo não ser adequada a essa situação. Baseado no perfil de densidade e na temperatura medidos, calculamos a densidade de pico no espaço de fase D, a qual é seguida nas várias etapas de evaporação. Nossos resultados mostram que para uma freqüência final de evaporação de 1,65 MHz nós superamos o valor esperado para D (2,612) alcançar o ponto crítico, no centro da amostra, para obter a condensação. Devido ao baixo número de átomos restantes no potencial, a interação não produz efeitos consideráveis e dessa forma um modelo de gás ideal permite justificar essa observação. / Using a system composed of a QUIC trap loaded from a slowed atomic beam, we have performed experiments to observe the Bose-Einstein Condensation of Na atoms. In order to obtain the atomic distribution in the trap, we use an in situ out of resonance absorption image of a probe beam to determine the temperature and the density, which are use to calculate the phase space D. We have followed D as a function of the final evaporation frequency. The results show that at 1.65 MHz we crossed the critical value for D which corresponds to the point to start Bose-Condensation of the sample. Due to the low number of atoms remaining in the trap at the critical point, the interaction produce minor effects and therefore an ideal gas model explains well the observations.

In dieser Arbeit werden hochgeladene, mit einer Electron Beam Ion Trap produzierte Ionen für die Erforschung des Elektroneneinfangs von Oberflächen und Gasen eingesetzt. Die Untersuchungen mit Gastargets konzentrieren sich auf die Energieabhängigkeit der Verteilung der K-Schalen-Röntgenstrahlen, die nach Elektroneneinfang in Rydberg-Zustände von Ar-17+ und Ar-18+ Ionen am Ende einer Kaskade von Elektronenübergängen entstehen. Die Ionen werden von der Ionenquelle mit einer Energie von 2 keV/u extrahiert, ladungsselektiert und anschließend bis auf 5 eV/u abgebremst, um dann mit einem Argon Gastarget zu interagieren. Für abnehmende Stoßenergien wird eine Verschiebung des Elektroneneinfangs in Zustände mit niedrigen Drehumpulsquantenzahlen beobachtet. Zum Vergleich wird auch die K-Schalen-Röntgenstrahlung auf Grund des Elektroneneinfangs bei Ar-17+ und Ar-18+ von dem Restgas in der Falle gemessen. Dabei wird eine Diskrepanz zu den Resultaten der Extraktionsversuche festgestellt. Mögliche Erklärungen werden diskutiert. In den Untersuchungen zum Elektroneneinfang von Oberflächen werden hochgeladene Ionen von der Ionenquelle mit Energien von 2 bis 3 keV/u extrahiert, ladungsselektiert und auf Targets gelenkt. Diese bestehen aus Siliziumnitridmembranen mit einer Vielzahl nanometergroßer Löcher, welche mittels eines fokussierten Ionenstrahls in Kombination mit ionenstrahlinduzierter Abscheidung dünner Filme erstellt werden. Es werden hierbei Lochdurchmesser von 50 bis 300 nm mit Formfaktoren von 1:5 bis 3:2 erreicht. Bei den hochgeladenen Ionen handelt es sich um Ar-16+ und Xe-44+. Nach dem Transport durch die Kapillare passieren die Ionen einen elektrostatischen Ladungstrenner und werden detektiert. Der Anteil des Elektroneneinfangs von den Wänden der Löcher ist weitaus geringer als Modellberechnungen vorhersagen. Die Resultate werden an Hand eines Kapillareffekts zur Ionenleitung diskutiert. / In this study highly charged ions produced in Electron Beam Ion Traps are used to investigate electron capture from surfaces and gases. The experiments with gas targets focus on spectroscopic measurements of the K-shell x-rays emitted at the end of radiative cascades following electron capture into Rydberg states of Ar-17+ and Ar-18+ ions as a function of collision energy. The ions are extracted from an Electron Beam Ion Trap at an energy of 2 keV/u, charge-selected and then decelerated down to 5 eV/u for interaction with an argon gas target. For decreasing collision energies a shift to electron capture into low orbital angular momentum capture states is observed. Comparative measurements of the K-shell x-ray emission following electron capture by Ar-17+ and Ar-18+ ions from background gas in the trap are made and a discrepancy in the results compared with those from the extraction experiments is found. Possible explanations are discussed. For the investigation of electron capture from surfaces, highly charged ions are extracted from an Electron Beam Ion Trap at energies of 2 to 3 keV/u, charge-selected and directed onto targets comprising arrays of nanoscale apertures in silicon nitride membranes. The highly charged ions implemented are Ar-16+ and Xe-44+ and the aperture targets are formed by focused ion beam drilling in combination with ion beam assisted thin film deposition, achieving hole diameters of 50 to 300 nm and aspect ratios of 1:5 to 3:2. After transport through the nanoscale apertures the ions pass through an electrostatic charge state analyzer and are detected. The percentage of electron capture from the aperture walls is found to be much lower than model predictions and the results are discussed in terms of a capillary guiding mechanism.

Caixas de gordura são dispositivos para retenção de material gorduroso, de origem animal e vegetal, proveniente de pias de cozinha. Sua instalação é exigida por muitos municípios para liberação de ligações de esgoto, visando reduzir as concentrações de óleos e graxas (OG) lançadas no sistema público de coleta e tratamento. Um fator primordial para que estas caixas cumpram suas funções é o estabelecimento de rotinas de manutenção envolvendo inspeção e limpeza periódica. A instalação de locais para recebimento e pré-tratamento dos resíduos retirados das caixas de gordura pode incentivar boas práticas de operação e manutenção destes dispositivos. Diante disso, os objetivos desta pesquisa contemplam a caracterização de resíduos acumulados em caixas de gordura e a avaliação da flotação como alternativa para o seu pré- tratamento, seguido de caracterização do óleo extraído da escuma produzida no flotador. Para tanto, materiais acumulados em caixas de gorduras de fontes distintas foram caracterizados, possibilitando observar grande variação em sua composição, e elevadas concentrações de DBO, DQO, SST e OG. Para verificar o desempenho da flotação visando à redução de OG no efluente pré-tratado, foram realizados ensaios em bancadas e testados quatro produtos químicos coagulantes, sendo eles o PAC, o cloreto férrico, o tanino e o polímero catiônico. Todos apresentaram eficiências elevadas na remoção de OG, porém o produto que apresentou mais vantagens na aplicação foi o polímero. Utilizando o polímero, foram realizados ensaios para verificação do desempenho de várias dosagens associadas a três pH de coagulação diferentes e o melhor desempenho se deu com a aplicação de 30 mg/L de polímero combinada ao pH 4,3, natural da amostra. Foram também realizados ensaios utilizando diferentes relações A/S (7,5/1000, 15/1000 e 22/1000 gar/gsólidos),obtendo-se melhores remoções de OG com a utilização da relação 22/1000 gar/gsólidos. Os materiais flotados obtidos nos ensaios de avaliação da relação A/S foram caracterizados e apresentaram concentrações de ST entre 9,7 e 10,6% e de OG entre 6,1 e 6,7%. Baseado nos resultados obtidos a flotação mostra-se como alternativa com bom desempenho para o pré- tratamento dos resíduos estudados. Para avaliar a dificuldade do manuseio dos resíduos provenientes de caixas de gordura, uma planta piloto foi operada, e entre as principias dificuldades observadas estão o odor intenso, a necessidade de remoção de sólidos grosseiros e de homogeneização do resíduo no tanque de equalização. Visando reaproveitamento do resíduo flotado, foi realizada a extração do óleo com solvente de uma amostra deste material (com teor de sólidos de 8,86%), obtendo a recuperação de 30g óleo/L resíduo com acidez de 13,76 mg KOH/L. A elevada acidez indica a necessidade de purificação, se o objetivo for a produção de biodiesel. / Grease traps are devices that retain animal and vegetal fatty material from kitchen sinks. Many municipalities demand its installation in order to connect house wastewater to the public network, aiming to reduce fat, oil and grease concentration in the collecting and treatment systems. The establishment of maintenance schedule involving inspection and periodic cleaning is a key factor to the right functioning of the device. The existence of appropriated sites to receive and pretreat grease trap wastes may stimulate good practices on maintenance and operation of these devices. In this direction, the objectives of this research are the characterization of grease trap wastes and the evaluation of flotation as an alternative for its pretreatment, followed by characterization of the oil extracted from the scum formed at flotator. Therefore, grease trap wastes from different sources were collected and characterized. It could be observed a wide variation on its composition and high concentrations of BOD, COD, TSS and FOG. Lab scale tests were performed to assess flotation performance to reduce pretreated effluent FOG using four chemical coagulants: PAC, ferric chloride, tannin and cationic polymer. All of them achieved high efficiency on FOG removal, however the product that presented more advantages on application was polymer. More tests were performed using several dosages of polymer associated to three pH coagulation conditions. The combination that resulted in the best efficiency was 30 mg/L of polymer combined to pH 4.3, samples natural pH. Different A/S ratios were also tested (7.5/1000, 15/1000, 22/1000 gair/gsolids), the ratio 22/1000 gair/gsolids presented the best FOG removal efficiencies. Floated material from A/S ratio tests were characterized and presented TS concentrations between 9.7% and 10.6% and FOG was from 6.1% to 6.7%. Based on the obtained results, flotation appears as a high performance alternative for the pretreatment of studied wastes. A pilot plant was operated to evaluate problems related to grease trap waste handling. The main problems were: bad odor, the need of screening and waste homogenization in equalization tank. Aiming to reuse the floated waste, oil was extracted from a sample (8.86% solid content) using solvent, achieving the recovery of 30g oil/L waste with 13.76 mgKOH/L acidity. The high acidity points to the need of purification if biodiesel production is intended.

Usando a técnica de resfriamento evaporativo para átomos comprimidos numa armadilha magnética tipo QUIC, implementamos experimentos para observar Condensação de Bose-Einstein de átomos de sódio. Nessa armadilha magnética temos átomos advindos de uma armadilha magneto-óptica, a qual é carregada por um feixe desacelerado como etapa de pré-resfriamento. Nossas medidas foram baseadas em imagens de absorção fora de ressonância de um feixe de prova pela amostra atômica. Essas imagens foram feitas in situ, ou seja, na presença do campo da armadilha magnética, pelo fato do número de átomos ser baixo e a técnica de tempo de vôo não ser adequada a essa situação. Baseado no perfil de densidade e na temperatura medidos, calculamos a densidade de pico no espaço de fase D, a qual é seguida nas várias etapas de evaporação. Nossos resultados mostram que para uma freqüência final de evaporação de 1,65 MHz nós superamos o valor esperado para D (2,612) alcançar o ponto crítico, no centro da amostra, para obter a condensação. Devido ao baixo número de átomos restantes no potencial, a interação não produz efeitos consideráveis e dessa forma um modelo de gás ideal permite justificar essa observação. / Using a system composed of a QUIC trap loaded from a slowed atomic beam, we have performed experiments to observe the Bose-Einstein Condensation of Na atoms. In order to obtain the atomic distribution in the trap, we use an in situ out of resonance absorption image of a probe beam to determine the temperature and the density, which are use to calculate the phase space D. We have followed D as a function of the final evaporation frequency. The results show that at 1.65 MHz we crossed the critical value for D which corresponds to the point to start Bose-Condensation of the sample. Due to the low number of atoms remaining in the trap at the critical point, the interaction produce minor effects and therefore an ideal gas model explains well the observations.

This thesis reports on the setup of a new ion trap apparatus designed for experiments with single ⁴⁰Ca⁺ ions to perform molecular spectroscopy. The calcium ion is laser cooled, allowing for sympathetic cooling of the nonfluorescing molecular ion. The aim of these experiments is to explore loading and identifying molecular ions in RF-Paul traps, as well as developing new spectroscopic tools to measure transitions of molecular ions via the fluorescence of co-trapped ⁴⁰Ca⁺ ions. Ground state cooling of a mixed ion pair is implemented as a first step towards increasing the sensitivity of our technique to the level necessary to measure transitions with low scattering rates (like those present in molecular ions). Doppler cooling on the S(1/2)->P(1/2) transition of the calcium ion results in the formation of a Coulomb crystal, the behavior of which may be used to infer properties of the molecular ion. Following cooling, sideband spectroscopy on the narrow S(1/2)->D(5/2) quadrupole transition of calcium may be used to identify the mass of single molecular ions. This method is verified via a non-destructive measurement on ⁴⁰CaH⁺ and ⁴⁰Ca¹⁶O⁺. The normal modes of the Coulomb crystal can also be used to extract information from the target ion to the control ion. By driving the blue side of a transition, laser induced heating can be put into the two ion system, which leads to changes in fluorescence of the ⁴⁰Ca⁺ ion, first demonstrated with two Ca⁺ isotopes. Increasing the sensitivity of this technique requires ground state cooling of both the ⁴⁰Ca⁺ ion and the ion of interest, enabling the transfer of the ion's motional state into the ground state with high probability. This thesis demonstrates ground state cooling of the atomic ion and sympathetic cooling of a second ion (⁴⁴Ca⁺). Once in the ground state, heating of the Coulomb crystal by scattering photons off of the spectroscopy ion can be measured by monitoring the resolved motional sidebands of the S(1/2)->D(5/2) transition of ⁴⁰Ca⁺, allowing for spectral lines to be inferred. Future experiments will investigate this technique with molecular ions.