Chitosan is a cationic natural polymer that is widely used as a topical dressing in wound management. Temporary coatings of removable denture bases with chitosan might be useful as supportive treatment in oral medicine. The aim of this study was to analyze the thickness, uniformity, and adhesive strength of chitosan coatings on simulated denture bases made from polymethyl methacrylate (PMMA). According to a standardized protocol, 20 PMMA cylinders (13 mm diameter, 5 mm in height) as well as 20 cubes (a = 25 mm) with intaglio U-shaped profiles were manufactured to simulate average sized alveolar ridges. Cylinders as well as cubes were divided into four test series with n = 5 each. After sandblasting with silica-modified alumina, one frontal surface of the PMMA cylinders and the intaglio surfaces of the U-shaped profiles was coated with chitosan acetate solution according to the following protocols: one layer of 2% chitosan acetate solution (test series I), one layer of 4% chitosan acetate solution (test series II), two layers of 2% chitosan acetate solution (test series III), and two layers of 4% chitosan acetate solution (test series IV). After drying and neutralization with NaOH, each cube was cut transversely and the coating thickness across the U-shaped profile assessed with a light microscope. Adhesive strength was evaluated by simulated tooth brushing and the loss of chitosan coating was evaluated qualitatively. Statistical analysis used Friedman ANOVA test for dependent samples and Kruskal-Wallis test for independent samples, post-hoc Dunn’s test (p < 0.05), and binomial test (p = 0.05). The mean chitosan coating thicknesses in the depth of the U-profiles were 71 µm (test series I), 77 µm (test series II), 121 µm (test series III), and 517 µm (test series VI). The thickness continuously decreased with rising angulation of the U-profile side walls. In test series I, the chitosan coating thickness significantly dropped above a 30° angulation of the U-profile side walls. In test series II to IV, the chitosan thickness drop was not statistically significant at angulations of 30° and 60°, but was at 90° angulation of the U-profile side walls. Adhesion strength was rated fair to good and did not differ significantly among the four test series. The coating technique described revealed chitosan layers with overall good adhesion strength but differing thicknesses. Coatings with one or two layers of 4% chitosan acetate solution allowed a relatively uniform chitosan thickness and thus might be usable in oral medicine.

Soil spectroscopy has experienced a tremendous increase in soil property characterisation, and can be used not only in the laboratory but also from the space (imaging spectroscopy). Partial least squares (PLS) regression is one of the most common approaches for the calibration of soil properties using soil spectra. Besides functioning as a calibration method, PLS can also be used as a dimension reduction tool, which has scarcely been studied in soil spectroscopy. PLS components retained from high-dimensional spectral data can further be explored with the gradient-boosted decision tree (GBDT) method. Three soil sample categories were extracted from the Land Use/Land Cover Area Frame Survey (LUCAS) soil library according to the type of land cover (woodland, grassland, and cropland). First, PLS regression and GBDT were separately applied to build the spectroscopic models for soil organic carbon (OC), total nitrogen content (N), and clay for each soil category. Then, PLS-derived components were used as input variables for the GBDT model. The results demonstrate that the combined PLS-GBDT approach has better performance than PLS or GBDT alone. The relative important variables for soil property estimation revealed by the proposed method demonstrated that the PLS method is a useful dimension reduction tool for soil spectra to retain target-related information.

This study tested whether the hormonal stress response to the DEX-CRH test may be predictive of the psychotherapy success for panic disorder (PD). Thirty-four patients diagnosed either with agoraphobia with PD or PD without agoraphobia were subjected to cognitive behavioural therapy (CBT). Patients (pre-therapy) and healthy volunteers were exposed to the DEX-CRH test. Blood samples were taken for cortisol and adrenocorticotropic hormone (ACTH) assessment. Established panic-specific questionnaires were handed out for the pre-therapy and post-therapy evaluation of disease severity (with reference to panic beliefs and agoraphobic cognitions, fear of bodily sensations, agoraphobic avoidance behaviour). Repeated measures ANCOVA were conducted for the analysis of the pre-therapy hormonal response, and Pearson\'s correlation analysis to test for associations with the psychotherapy outcome. Data analyses revealed large effect sizes for CBT in the clinical measures (η2 ≥ 0.321), main effects of time for cortisol and ACTH with no differences between both groups, and significant associations between cortisol release and agoraphobic cognitions for the patients. PD diagnosis had no impact on the hormonal response. However, those patients with higher cortisol release showed less improvement after CBT (significantly for agoraphobic cognitions). Clinical implications of these findings are the prediction of the therapy success from a potential endocrine correlate whose persistency (if assessed repeatedly) during the treatment may predict (non-)response to the current treatment, possibly representing a decision support for a change in treatment to avoid the continuation of an inefficient treatment.

Over the past decades, quantitative methods linking theory and observation became increasingly important in many areas of life science. Subsequently, a large number of mathematical and computational models has been developed. The BioModels database alone lists more than 140,000 Systems Biology Markup Language (SBML) models. However, while the exchange within specific model classes has been supported by standardisation and database efforts, the generic application and especially the re-use of models is still limited by practical issues such as easy and straight forward model execution. MAGPIE, a Modeling and Analysis Generic Platform with Integrated Evaluation, closes this gap by providing a software platform for both, publishing and executing computational models without restrictions on the programming language, thereby combining a maximum on flexibility for programmers with easy handling for non-technical users. MAGPIE goes beyond classical SBML platforms by including all models, independent of the underlying programming language, ranging from simple script models to complex data integration and computations. We demonstrate the versatility of MAGPIE using four prototypic example cases. We also outline the potential of MAGPIE to improve transparency and reproducibility of computational models in life sciences. A demo server is available at magpie.imb.medizin.tu-dresden.de.

The objective of this study was to analyze patterns, dynamics and processes of land-use/cover changes in the transboundary Mara River Basin in East Africa. We specifically focused on deforestation and expansion of agriculture in the watershed. The intensity analysis approach was used to analyze data from satellite imagery-derived land-use/cover maps. Results indicate that swap change accounted for more than 50% of the overall change, which shows a very dynamic landscape transformation. Transition from closed forest to open forest was found to be a dominant landscape change, as opposed to a random change. Similarly, transition from open forest to small-scale agriculture was also found to be a dominant transition. This suggests a trend (pathway) of deforestation from closed forest to small-scale agriculture, with open forest as a transitional land cover. The observed deforestation may be attributed to continuous encroachment and a series of excisions of the forest reserve. Transition from rangeland to mechanized agriculture was found to be a dominant land-use change, which was attributed to change in land tenure. These findings are crucial for designing strategies and integrated watershed management policies to arrest further deforestation in the forest reserves as well as to sustainably control expansion of agriculture.

It is far from conclusive what distinguishes the inattentive (ADD) and the combined (ADHD-C) subtype of ADHD on the neuronal level. Theoretical considerations suggest that especially interval timing processes may dissociate these subtypes from each other. Combining high-density EEG recordings with source localization analyses, we examine whether there are ADHD-subtype specific modulations of neurophysiological processes subserving interval timing in matched groups of ADD (n = 16), ADHD-C (n = 16) and controls (n = 16). Patients with ADD and ADHD-C show deficits in interval timing, which was correlated with the degree of inattention in ADD patients. Compared to healthy controls, patients with ADHD-C display a somewhat weaker, yet consistent response preparation process (contingent negative variation, CNV). In patients with ADD, the early CNV is interrupted, indicating an oscillatory disruption of the interval timing process. This is associated with activations in the supplemental motor areas and the middle frontal gyrus. Patients with ADD display adequate feedback learning mechanisms (feedback-related negativity, FRN), which is not the case in patients with ADHD-C. The results suggest that altered pacemaker-accumulation processes in medial frontal structures distinguish the ADD from the ADHD-C subtype. Particularly in patients with ADD phasic interruptions of preparatory neurophysiological processes are evident, making this a possible diagnostic feature.

Plasmacytoid dendritic cells (pDC) constitute a very rare blood cell population and play a significant role in immune response and immune-mediated disorders. Investigations on primary pDCs are hindered not only due to their rarity but also because they represent a heterogeneous cell population which is difficult to culture ex vivo. We generated a conditionally immortalized pDC line (Dox-pDC) from mice with Doxycycline-inducible SV40 Large T Antigen with a comparable immune profile to primary pDCs. The Dox-pDC secrete pro- and anti-inflammatory cytokines upon Toll-like receptor 9 stimulation and upregulate their MHCI, MHCII and costimulatory molecules. Further, the Dox-pDC activate and polarize naïve T cells in vivo and in vitro in response to the model antigen Ovalbumin. Due to their long-term culture stability and their robust proliferation Dox-pDC represent a reliable alternative to primary mouse pDC.

Shungite is a carbonaceous rock which is abundant in Karelia (Russian Federation). Large deposits of shungite with low levels of carbon (approx. 10% C) are also found in Kazakhstan, where it is mined under the trade name Taurit (Koksu Mining Company). Although Taurit has been reported to be used as an adsorbent for hazardous compounds in water treatment, there is very little precise data about its adsorption capacity or the compounds adsorbed. In this study, the ability of Taurit to adsorb Zn(II) was investigated and Freundlich isotherms were determined for both distilled water and tap water. Taurit was found to have a high buffer capacity leading to pH values > 7.0 in aqueous solution. Because dissolved zinc precipitates as Zn(OH)2 under alkaline conditions, the pH must be carefully controlled and kept ≤7.0. Despite the small inner surface area (BET) of Taurit (13.4 m2 g−1), Freundlich coefficients for distilled water (Kf = 2.4, n = 4.0) and tap water (Kf = 1.5, n = 2.5) were similar to other adsorbents. Our results indicate that Taurit could provide a cheap alternative to activated carbon since both substances have a similar adsorption capacity (at least for Zn(II)).

Introduction Poor adherence is a common challenge in self-directed mental health interventions. Research findings indicate that telephone prompts may be useful to increase adherence. Method Due to poor adherence in a randomized controlled trial evaluating an Internet-based aftercare program for women with bulimia nervosa we implemented regular short telephone prompts into the study protocol halfway through the trial period. Of the 126 women in the intervention group, the first 63 women were not prompted by telephone (unprompted group) and compared with 63 women who subsequently enrolled into the study and were attempted to prompt bimonthly by a research assistant (telephone prompt group). Completed telephone calls took less than 5 min and did not include any symptom-related counseling. Results Most of the women in the telephone prompt group (67%) were reached only once or twice during the intervention period. However, overall adherence in the telephone prompt group was significantly higher than in the unprompted group (T = − 3.015, df = 124, p = 0.003). Conclusion Our findings from this secondary analysis suggest that telephone prompts can positively affect adherence to an Internet-based aftercare intervention directed at patients with bulimia nervosa.

In oral sciences, chitosan application is of interest due to its antimicrobial and hemostatic activity. Chitosan coating of dentures and other intraoral devices could be beneficial for treatment of denture stomatitis or in the management of postoperative bleeding. Disinfection of dentures and prosthodontic materials is crucial before their use in patients. This study investigated the influence of chemical disinfectants on chitosan-coated surfaces. A total of 100 specimens were made: 50 of PMMA (polymethyl methacrylate), and 50 of PETG (polyethylene terephthalate glycol-modified) material and coated with 2% chitosan acetate solution. In each material, 5 groups (10 specimens each) were established and disinfected with Printosept-ID (L1), MD 520 (L2), Silosept (L3), or Dentavon (L4), or stored in distilled water (L0, control group). After disinfection, all specimens underwent abrasion tests (30,000 cycles in a tooth-brushing simulator). Areas without chitosan coating were measured by digital planimetry both before and after the disinfection/abrasion procedure and a damage-score was calculated. Regarding chitosan coating, the statistical analysis showed a significant influence of the disinfectants tested and significant differences between disinfectants (p < 0.05). Chitosan coating was most stable on PMMA and PETG after disinfection with MD 520 (L2). Otherwise, active oxygen containing disinfectants (L3, L4) led to the greatest alterations in the chitosan coating.