No description available.

No description available.

<p>Fly ash and AMD samples were characterised by standard analytical methods for selection of the test materials. Active treatment by means of mixing fly ash with AMD in beakers and a large tank at pre-determined ratios have shown that fly ash is capable of neutralising AMD and increasing the pH beyond neutral values, which optimises the removal of heavy metals and ions. The trend was: the more fly ash added the quicker was the reaction time and higher the pH values achieved. Iron was reduced by as much 99 % in beaker scale experiments via Fe(OH)3 precipitation at pH values &gt / 4.0. A 99 % decrease in aluminium concentration was observed which was attributed to the precipitation of primarily gibbsite and various other mineral phases at pH values &gt / 5.5. As the pH increases, sulphate is adsorbed via Fe(OH)3 and gypsum precipitation at elevated pH. Sulphate attenuation with fly ash was excellent, achieving 98 % attenuation with beaker scale experiments and 1:1 fly ash:AMD ratio. Sulphate attenuation with fly ash was comparable to membrane and ion exchange systems and exceeded the performance of limestone treatment. Except for the larger volumes of fly ash needed to neutralise the AMD, fly ash proved to be a feasible and cost efficient alternative to limestone treatment. Fly ash produced competing results to limestone concerning acidity removal and sulphate attenuation. The comparison highlighted the advantages of utilising fly ash in comparison to limestone and demonstrated its cost effectiveness. The results of this study have shown that fly ash could be successfully applied for the neutralisation of acid mine drainage (AMD) and effectively attenuate the sulphate load in the treated water. The critical parameters to this technology are the variations of chemical composition and mineralogy of fly ash, which could influence the pH, contact time of the neutralisation reaction, and the same is true if the AMD quality varies.</p>

This thesis explores the inverse problem of optical tomography applied to two-dimensional heterogeneous domains. The neutral particle transport equation was used as the forward model to simulate how neutral particles stream through and interact within these heterogeneous domains. A constrained optimization technique that uses Newton's method served as the basis of the inverse problem. The capabilities and limitations of the presented method were explored through various two-dimensional domains. The major factors that influenced the ability of the optimization method to reconstruct the cross sections of these domains included the locations of the sources used to illuminate the domains, the number of separate experiments used in the reconstruction, the locations where measurements were collected, the optical thickness of the domain, the amount of signal noise and signal bias applied to the measurements, and the initial guess for the cross section distribution. All of these factors were explored for problems with and without scattering. Increasing the number of sources, measurements and experiments used in the reconstruction generally produced more successful reconstructions with less error. Using more sources, experiments and measurements also allowed for optically thicker domains to be reconstructed. The maximum optical thickness that could be reconstructed with this method was ten mean free paths for pure absorber domains and two mean free paths for domains with scattering. Applying signal noise and signal bias to the measured fluxes produced more error in the reconstructed image. Generally, Newton's method was more successful at reconstructing domains from an initial guess for the cross sections that was greater in magnitude than their true values than from an initial guess that was lower in magnitude.

Horses consume large amounts of fiber in their diet, which may affect digestibility and digesta rate of passage. The objective of these studies was to assess the effects of diet composition on digestibility and rate of passage in horses using mathematical models. Using previously published data, forage dry matter digestibility (DMD) was related to forage neutral detergent fiber (NDF) concentrations and crude protein (CP) concentrations (DMD = 66.1178 – 0.3410*NDF + 0.6356*CP, DM basis; P < 0.001). In a second experiment, horses were fed diets formulated to have high fiber (HF, n= 3; NDF = 55.3%, CP = 11.8%) or low fiber (LF, n = 3; NDF = 40.5%, CP = 13.3%) concentrations. The LF treatment had greater DM, organic matter, and gross energy digestibilities (P < 0.05), whereas the HF treatment had greater NDF digestibility (P < 0.05). Mathematical models were useful to determine mean retention time (MRT) and there were no differences between model MRT and algebraic MRT, or treatment. Some compartmental parameters were different between treatments (P < 0.05), indicating that dietary fiber may alter some components of digesta passage in horses.

Power inverters, used to convert DC power to AC, are often used in e.g. solar power applications. However, they tend to be impractically large and expensive; as such, power miniaturization is an active research area. In this thesis, several classes of modern power inverters are evaluated and compared with regards to size, efficiency and output quality in order to identify areas of potential improvement. Methods for estimation of THD, power losses and input ripple are created and verified against a simulation of a five-level neutral-point-clamped inverter with SPWM control. Finally, this design is implemented physically and is found to achieve 94.5% efficiency and 7% THD under low voltage laboratory conditions, while remaining smaller than an average textbook.

Financial market analysis nowadays constitutes an important pillar in central banks' monetary policy considerations. This is because the inherently forward-looking properties of asset prices can provide policy-makers with valuable information about future macroeconomic prospects, as seen through the eyes of investors. The five essays contained in this thesis elaborate upon three separate but complementary topics within the area of financial market research. First, the price discovery process of asset prices following releases of macroeconomic and monetary policy-related news is investigated. Such analysis can help in improving a central bank's understanding of how market participants update their views about future growth and inflation prospects. Second, an attempt is made to identify the factors which explain the time-varying co-movement of bond and stock prices. This analysis reveals that periods of negative correlation between the two assets tend to coincide with periods of very low investor risk appetite. Third, frequency distributions implied by options prices are often employed by central banks to assess the degree of uncertainty prevailing in markets as well as how the perceived balance of risks concerning future asset price movements is tilted. Various methods have been developed to estimate option-implied frequency distributions and the thesis assesses and compares the robustness of two of the most commonly used methods in central banks. / <p>Diss. Stockholm : Handelshögskolan, 2007 S. 9-16: sammanfattning, s. 17-160: 5 uppsatser</p>

This study explores the possibility of utilizing bioleaching techniques for nickel extraction from a mixed sulfide ore deposit with high magnesium content. Due to the ultramafic nature of this material, well-studied bioleaching technologies, which rely on acidophilic bacteria, will lead to undesirable processing conditions. This is the first work that incorporates nitrate-dependent bacteria under pH 6.5 environments for bioleaching of base metals. Experiments with both defined bacterial strains and indigenous mixed bacterial cultures were conducted with nitrate as the electron acceptor and sulfide minerals as electron donors in a series of microcosm studies. Nitrate consumption, sulfate production, and Ni released into the aqueous phase were used to track the extent of oxidative sulfide mineral dissolution; taxonomic identification of the mixed culture community was performed using 16S rRNA gene sequencing. Nitrate-dependent microcosms that contained indigenous sulfur- and/or iron-oxidizing microorganisms were cultured, characterized, and provided a proof-of-concept basis for further bioleaching studies.

HIV/AIDS is the most threatening and challenging infectious diseases of our time, with the highest increase of newly infected cases reported. This infectious disease was discovered in the early eighties under homosexual men and was later to be discovered in heterosexuals. HIV is a systemic immunosuppressive disorder which causes a depletion of CD4+ T cells and develops into the acquired immunodeficiency syndrome - AIDS. Africa is the continent most affected by HIV/AIDS with the southern parts of Africa having the highest prevalence rates compared to the rest of Africa. Statistics indicate that AIDS is responsible for 3% of deaths in children worldwide - one in seven people dying of an HIV-related illness is a child under the age of 15 years. It was stated by the WHO that countries should develop improved antiretrovirals regimes for the prevention of mother-to-child transmission. Difficulties in administering antiretrovirals (ARVs) to patients (especially children) are the strict dosage regimes and the severe adverse reactions. These factors complicate patient adherence. The list of problems in treating patients is endless and includes the distribution, stability as well as the low efficacy of these drugs. Most of the above mentioned problems and obstacles related to ARVs and ARV treatment could be minimized or eliminated by the use of a stable and effective drug delivery system. Enhancing ARV treatment may be accomplished by the use of the Pheroid™ drug delivery system. Pheroids™ consists mainly of fatty acids and sterile nitrous oxide gassed water. Pharmacological active substances are entrapped into submicron and micron sized structures called Pheroids™. Research showed promising results and advantages in delivering drugs through oral and transdermal routes using Pheroid™ technology. The focus of this study was to test the possible enhancement of the efficacy of antiretrovirals using Pheroid™ technology. The assays used to study this possible enhancement were a modified neutral red and a modified 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium (MTT) assay. These assays confirmed and illustrated the toxic and protective properties of the tested ARVs (stavudine, lamivudine and nevirapine). An MT-2 cell line was used and infected with an HIV-1 strain, SW7-TCL. Applying Pheroid™ technology in these assays resulted in massive cell death, due to increased ARV toxic levels within the cells. Viability tests proved that Pheroids™ had no effect on the viability of cells at the concentration typically used. This confirmed the enhancing properties of Pheroids™ in the delivery of drugs into the cells. The MTT assay was further adapted from a seven day incubation period to a three day incubation period. By using a low concentration series and a three day incubation period the loss of cells through toxicity was partially overcome. One of the problems that arose form this study was the non-reproducibility of the results. Absorbance levels fluctuated at specific concentrations of the same ARV, which cause difficulties in comparing results. This result was repeatedly confirmed in this syncytium forming infection model. In conclusion, Pheroid™ technology enhanced the delivery of ARVs into the cells although it resulted in cell death. Both the neutral red and MTT assays were found to be inaccurate but further development, research and assay optimization could result in improved in vitro studies. The article format was used for this thesis, as described in the general academic rules in section A.13.7.3 of the North West University. Chapter 1 deals with HIV/AIDS related problems, statistics and treatment obstacles. Chapter 2 is a summary of the cell viability assays used in this study. Pheroid™ technology and its application to ARV treatment are dealt with in chapter 3. The proposed article for submission in the journal Cell Death and Differentiation has been included in chapter 4. Some of the results from the study are reported in the article and annexures, whilst other results are shown and discussed in Chapter 5. Chapter 6 gives a conclusion and final summary of this study. All other experimental methods and results are enclosed in the annexures, as is the "Guide for authors" for the article. / Thesis (M.Sc. (Pharmaceutics))--North-West University, Potchefstroom Campus, 2008.

This paper presents an outline of the generation of mass for the massive Standard Model particles (fermions, $W^\pm$, $Z^0$) through electroweak symmetry breaking via the Higgs mechanism, and how the Higgs boson emerges from this framework. A Monte Carlo study was done on the decay $H\rightarrow\tau\tau$, with one leptonically and one hadronically decaying tau, with two different production channels for the $H$, gluon-gluon fusion (gg) and vector boson fusion (VBF), at $\sqrt s = 7\tev$ with a Higgs mass $m_H = 120\gev$. The kinematics of these two production channels were compared and it was found that the transverse momentum of muons produced in VBF were higher on average than those produced in gg. This differance was greater in muons originating from the leptonically decaying tau in the Higgs decay, than those produced by other processes in the underlying event. In the latter, however, the difference was still noticable. Jets were slightly more abundant in VBF than in gg, and were in VBF more distributed along the beam axis. The separation in pseudorapidity between the two jets with highest transverse momentum was found to be greater in VBF than in gg. An attempt to reconstruct the Higgs mass using Monte Carlo data run through a simulation of the ATLAS detector was done. The estimator used was the transverse mass of the system consisting of the visible part of the hadronically decaying tau, the lepton from the leptonically decaying tau and the total missing transvese energy. In gg the mean of the transvese mass distribution was found to be $89.26\gev$ with a root mean square uncertainty (RMS) of $23.86\gev$. In VBF the mean was found to be $85.57\gev$ with RMS $27.08\gev$.