Spelling suggestions: "subject:"timber buildings"" "subject:"timber inbuildings""
1 |
Seismic response and design of subassemblies for multi-storey prestressed timber buildings.Iqbal, Md Asif January 2011 (has links)
Timber has experienced renewed interests as a sustainable building material in recent times. Although traditionally it has been the prime choice for residential construction in New Zealand and some other parts of the world, its use can be increased significantly in the future through a wider range of applications, particularly when adopting engineered wood material, Research has been started on the development of innovative solutions for multi-storey non-residential timber buildings in recent years and this study is part of that initiative. Application of timber in commercial and office spaces posed some challenges with requirements of large column-free spaces. The current construction practice with timber is not properly suited for structures with the aforementioned required characteristics and new type of structures has to be developed for this type of applications.
Any new structural system has to have adequate capacity for carry the gravity and lateral loads due to occupancy and the environmental effects. Along with wind loading, one of the major sources of lateral loads is earthquakes. New Zealand, being located in a seismically active region, has significant risk of earthquake hazard specially in the central region of the country and any structure has be designed for the seismic loading appropriate for the locality.
There have been some significant developments in precast concrete in terms of solutions for earthquake resistant structures in the last decade. The “Hybrid” concept combining post-tensioning and energy dissipating elements with structural members has been introduced in the late 1990s by the precast concrete industry to achieve moment-resistant connections based on dry jointed ductile connections. Recent research at the University of Canterbury has shown that the concept can be adopted for timber for similar applications. Hybrid timber frames using post-tensioned beams and dissipaters have the potential to allow longer spans and smaller cross sections than other forms of solid timber frames. Buildings with post-tensioned frames and walls can have larger column-free spaces which is a particular advantage for non-residential applications.
While other researchers are focusing on whole structural systems, this research concentrated on the analysis and design of individual members and connections between members or between member and foundation. This thesis extends existing knowledge on the seismic behaviour and response of post-tensioned single walls, columns under uni-direction loads and small scale beam-column joint connections into the response and design of post-tensioned coupled walls, columns under bi-directional loading and full-scale beam-column joints, as well as to generate further insight into practical applications of the design concept for subassemblies. Extensive experimental investigation of walls, column and beam-column joints provided valuable confirmation of the satisfactory performance of these systems. In general, they all exhibited almost complete re-centering capacity and significant energy dissipation, without resulting into structural damage. The different configurations tested also demonstrated the flexibility in design and possibilities for applications in practical structures.
Based on the experimental results, numerical models were developed and refined from previous literature in precast concrete jointed ductile connections to predict the behaviour of post-tensioned timber subassemblies. The calibrated models also suggest the values of relevant parameters for applications in further analysis and design. Section analyses involving those parameters are performed to develop procedures to calculate moment capacities of the subassemblies.
The typical features and geometric configurations the different types of subassemblies are similar with the only major difference in the connection interfaces. With adoption of appropriate values representing the corresponding connection interface and incorporation of the details of geometry and configurations, moment capacities of all the subassemblies can be calculated with the same scheme. That is found to be true for both post-tensioned-only and hybrid specimens and also applied for both uni-directional and bi-directional loading. The common section analysis and moment capacity calculation procedure is applied in the general design approach for subassemblies.
|
2 |
Nailed timber joints subjected to alternating load cyclesCruz, Helena Maria Pires January 1993 (has links)
No description available.
|
3 |
Dynamic response of post-tensioned timber frame buildingsPino Merino, Denis Ademir January 2011 (has links)
An extensive research program is on-going at the University of Canterbury, New Zealand to develop new technologies to permit the construction of multi-storey timber buildings in earthquake prone areas. The system combines engineered timber beams, columns and walls with ductile moment resisting connections using post-tensioned tendons and eventually energy dissipaters.
The extensive experimental testing on post-tensioned timber building systems has proved a remarkable lateral response of the proposed solutions. A wide number of post-tensioned timber subassemblies, including beam-column connections, single or coupled walls and column-foundation connections, have been analysed in static or quasi-static tests.
This contribution presents the results of the first dynamic tests carried out with a shake-table. Model frame buildings (3-storey and 5-storey) on one-quarter scale were tested on the shake-table to quantify the response of post-tensioned timber frames during real-time earthquake loading. Equivalent viscous damping values were computed for post-tensioned timber frames in order to properly predict their response using numerical models. The dynamic tests were then complemented with quasi-static push and pull tests performed to a 3-storey post-tensioned timber frame.
Numerical models were included to compare empirical estimations versus dynamic and quasi-static experimental results. Different techniques to model the dynamic behaviour of post-tensioned timber frames were explored. A sensitivity analysis of alternative damping models and an examination of the influence of designer choices for the post-tensioning force and utilization of column armouring were made.
The design procedure for post-tensioned timber frames was summarized and it was applied to two examples. Inter-storey drift, base shear and overturning moments were compared between numerical modelling and predicted/targeted design values.
|
4 |
Wind-induced dynamic response of a 22-storey timber building : Options for structural design of the Hallonbergen projectTjernberg, Frida January 2015 (has links)
Folkhem is a Swedish company exclusively building timber residential buildings in the Stockholm area. The company is currently in the planning stages of what would be the world’s tallest timber building, a 22-storey timber residential buiding in Hallonbergen, Sundbyberg. In this master thesis, this proposed building has been analyzed with regards to its wind-induced dynamic response. The work includes studies of stabilization of tall structures, case studies of existing buildings and developed systems for tall timber construction and analyzed options for structural design of the Hallonbergen project. Eleven different structural systems have been investigated with regards to their displacement at the top and their peak acceleration when subject to wind loading. The peak acceleration has been calculated using both Eurocode and ISO 4354. The values have been assessed against ISO 6897 and ISO 10137. The results indicate that it is possible to construct the Hallonbergen project without risk of unacceptable dynamic response, using any of the following options; The Martinson’s system with 259 mm CLT plates The Kauffmann system The structural system presented in “The Case for Tall Wood Buildings” The structural system presented in “The Timber Tower Research Project”
|
5 |
STABILA HÖGHUS I TRÄ : En analys av infästningars inverkan på accelerationer och utböjningar i ett 15-våningshus av trä / STABILITY IN A TALL TIMBER CONSTRUCTIONBlom, Henrik, Thored, Johan January 2016 (has links)
In today’s society cities grow increasingly larger, not only on the ground but vertically as well. Utilizing height means taller buildings, which often are large steel- and concrete constructions. Why not construct tall buildings out of timber instead, a material by many believed to be far better from an environmental perspective than steel and concrete? The answer lies in the lack of knowledge regarding tall timber constructions and the stresses they need to withstand. The report was conducted at the construction consulting company Bjerking AB, Uppsala. The focus in this report was to examine accelerations and deformations as an effect of wind loads. The issue at hand was whether the connections between building elements affect the dynamic responses that occur. The chosen model was a 15 storey timber building whose walls and floors consisted mainly of cross laminated timber elements as the load bearing structure. As a large amount of the analyses were complex, the calculations were made in the computer program FEM-Design, which is a finite element program. After performing numerous calculations with different settings, a result emerged. Clear trends could be seen in the connections’ influence on accelerations and deformations. A stiffer connection makes the building more resistant to wind loads. This result has to be considered when constructing tall timber buildings to avoid problems with accelerations and deformations. However, merely adjusting the connections to meet requirements is not sufficient, other measures are also needed. / I dagens samhälle växer sig städer allt större, inte bara till ytan utan även på höjden. För att kunna exploatera på höjden krävs högre hus vilka ofta byggs av stora stål- och betongkonstruktioner. Men varför byggs inte höghus istället av trä som av många anses vara mycket bättre ur bland annat miljösynpunkt? Svaret ligger i kunskapsbristen som finns kring hur höga trähus ska konstrueras för att klara de olika påfrestningarna det utsätts för. Arbetet genomfördes i samarbete med konsultföretaget Bjerking AB, Uppsala. En del av de problemen som finns har undersökts, nämligen accelerationer och deformationer som en effekt av vindlaster. Frågeställningen är huruvida infästningarna och dess inspänningsgrad mellan olika byggnadselement påverkar de statiska respektive dynamiska effekterna som uppstår. Den valda modellen, ett 15-våningar högt trähus, bestod i huvudsak av CLT-element, Cross Laminated Timber, i både väggar och bjälklag som hade till uppgift att föra ner lasterna till grunden. Då analysen är komplex utfördes en stor del av beräkningarna i FEM-Design som är ett avancerat beräkningsprogram. För att säkerställa indata samt komplettera kunskapen inom området utfördes en bakgrundsstudie. Efter utförta beräkningar på den bestämda modellen fastslogs resultatet. En tydlig trend kunde följas vid beaktning av accelerationer och deformationer vid olika värden på inspänningen mellan byggnadselementen. Styvare förband gör byggnaden mer beständig gentemot vindlaster. Ett resultat som måste beaktas för att kunna lösa en del av de problem som uppstår med höga hus i trä. Dock räcker det inte att enbart justera inspänningsgraden för att klara gällande krav och normer, utan ytterligare åtgärder krävs.
|
6 |
The role of biobased building materials in the climate impacts of construction : Effects of increased use of biobased materials in the Swedish building sectorPeñaloza, Diego January 2017 (has links)
A significant share of the global climate change impacts can be attributed to the construction sector. One mitigation strategy is increasing the use of biobased materials. Life cycle assessment (LCA) has been used to demonstrate the benefits of this, but forest complexities create uncertainty due to omission of key aspects. The aim of this thesis is to enhance understanding of the effects of increasing use of biobased materials in climate change mitigation of construction works with a life cycle perspective. Non-traditional LCA methodology aspects were identified and the climate impact effects of increasing the use of biobased materials while accounting for these was studied. The method applied was dynamic LCA combined with forest carbon data under multi-approach scenarios. Diverse case studies (a building, a small road bridge and the Swedish building stock) were used. Most scenarios result in impact reductions from increasing the use of biobased materials in construction. The inclusion of non-traditional aspects affected the results, but not this outcome. Results show that the climate mitigation potential is maximized by simultaneously implementing other strategies (such as increased use of low-impact concrete). Biobased building materials should not be generalised as climate neutral because it depends on case-sensitive factors. Some of these factors depend on the modelling of the forest system (timing of tree growth, spatial level approach, forest land use baseline) or LCA modelling parameters (choice of the time horizon, end-of-life assumptions, service life). To decrease uncertainty, it is recommended to use at least one metric that allows assessment of emissions based on their timing and to use long-term time horizons. Practitioners should clearly state if and how non-traditional aspects are handled, and study several methodological settings. Technological changes should be accounted for when studying long-term climate impacts of building stocks. / Irreversibel global påverkan på klimat och miljö måste undvikas och olika strategier som begränsar klimatförändringarna kan utnyttjas för att hantera denna utmaning. En betydande andel av de globala utsläppen av växthusgaser kan hänföras till byggsektorn i allmänhet och cementproduktion i synnerhet, och begränsningsstrategier söker alternativ till fossil- och mineralbaserade resurser, med mindre påverkan, som exempelvis en ökad användning av biobaserade material i byggandet. Livscykelanalys (LCA) har använts för att demonstrera klimatnyttan av denna ökning, men skogens komplexiteter i samband med biogent koldioxid skapar osäkerhet i resultaten då de som genomför LCA-studier traditionellt utelämnar viktiga nyckelaspekter. Denna avhandling syftar till att öka förståelsen för effekterna av en ökad användning av biobaserade material för begränsning av byggandets klimatpåverkan i ett livscykelperspektiv. Forskningsfrågorna formulerades med fokus på att identifiera icke-traditionell LCA-metodik, samt att bedöma miljöeffekterna av en ökad användning av biobaserade material med redovisning av dessa aspekter på olika nivåer, gällande enstaka konstruktioner och byggnadsbeståndet som helhet. Den metodik som används är dynamisk LCA i kombination med data om skogskolbalans, med analyser av flera scenarier med olika metodologiska antaganden. Fallstudier med olika kännetecken användes, nämligen en byggnad, en bilvägsbro och en uppskattning av det svenska byggnadsbeståndet på lång sikt. Resultaten bekräftar att en ökad användning av biobaserade material minskar klimatpåverkan av byggandet – en tydlig majoritet av de scenarier som analyserats för alla fallstudier resulterar i sänkt klimatpåverkan. Införandet av icke-traditionella LCA-aspekter påverkar resultatet, men förändrar inte att en ökad användning av biobaserade material resulterar i lägre långsiktig och kumulativ klimatpåverkan. Resultaten visar också att den maximala klimatbegränsningspotentialen endast nås genom att samtidigt införa andra tekniska lösningar med lägre klimatpåverkan. När det gäller LCA-metodik visar resultaten att antagandet att biobaserade byggnadsmaterial är klimatneutrala är en överförenkling eftersom deras klimatpåverkan beror på fallspecifika faktorer och därför bör inga generaliseringar göras. Några av dessa klimatpåverkande faktorer beror på modellering av skogssystemet i en dynamisk LCA; såsom när skogstillväxten antas börja i förhållande till avverkningen, den geografiska upplösningen för att analysera de biogena kolflödena dvs. som ett avverkningsbestånd eller på landskapsnivå och vad utgångsläget sätts till vid analys av skogens markanvändning. Andra faktorer beror på LCA-modellering, nämligen valet av integrerad tidshorisont för beräkning av klimatpåverkan, det antagna scenariot för avfallshantering och lagringsperioden för det biogena kolet i tillverkade produkter. För att minska osäkerheten i bedömning av klimatpåverkan av biobaserade byggmaterial rekommenderas användning av minst en mätmetod som gör det möjligt att bedöma koldioxidutsläppen baserat på tidpunkten på dessa, samt att tillämpa mätvärden med långa tidsperspektiv. Redovisning av icke-traditionella aspekter har en betydande effekt på klimatpåverkan av biobaserade byggmaterial. Utförare av analyser rekommenderas därför även att redovisa hur dessa aspekter hanteras och att ställa upp flera olika scenarier och analysera dessa med flera olika metodologiska inställningar. Slutligen rekommenderas att ta hänsyn till den tekniska utvecklingen vid analyser av långsiktig klimatpåverkan av byggnadsbeståndet som genomförs med dynamiska värden för processer som äger rum i framtiden. / Para evitar impactos irreversibles a nivel global, es necesario mitigar el cambio climático. Una parte significativa de las emisiones globales de gases efecto invernadero puede atribuirse al sector de la construcción y la producción de cemento. Entretanto, se busca implementar estrategias de mitigación de bajo impacto, tal es el caso de incrementar el uso de materiales de origen forestal. El análisis de ciclo de vida (ACV) se aplica con frecuencia para demostrar los beneficios climáticos de este incremento, pero las complejidades relacionadas con el bosque y el carbono biogénico crean incertidumbre ya que los autores normalmente omiten ciertos aspectos clave. Esta tesis busca mejorar la comprensión de los efectos de un incremento en el uso de materiales de origen forestal en la mitigación del cambio climático en el sector de la construcción, bajo una perspectiva de ciclo de vida. Para ello se han formulado preguntas de investigación centradas en la identificación de los aspectos metodológicos no tradicionales del ACV que pueden afectar el resultado, así como en la evaluación de los efectos ambientales del aumento del uso de materiales biológicos en construcciones o en la construcción en existencia, mientras se toman en cuenta dichos aspectos. Los métodos aplicados incluyen el ACV dinámico en combinación con modelos del balance de carbón en el bosque, además del análisis de múltiples escenarios con diferentes configuraciones metodológicas y asunciones. Se utilizaron casos de estudio con diferentes características y sus respectivos productos equivalentes de referencia; un edificio, un puente para carretera pequeño y la construcción en existencia en Suecia a largo plazo. Los resultados confirman que el aumento del uso de materiales de origen forestal disminuye el impacto climático de la construcción, ya que la gran mayoría de los escenarios analizados para todos los casos de estudio resultan en reducciones del impacto climático. La inclusión de aspectos no tradicionales del ACV ha influido en los resultados, sin afectar el hecho de que incrementar el uso de material biológico se traduce en menores impactos climáticos acumulados a largo plazo. Los resultados también muestran que el potencial máximo de mitigación climática sólo se alcanza mediante la implementación simultánea de otras tecnologías de bajo impacto. En cuanto a la metodología del ACV, la tesis ilustra que la hipótesis de que los biomateriales de construcción son neutrales respecto a sus impactos climáticos es una simplificación excesiva, y demuestra también que los flujos de carbono biogénico deben ser tenidos en cuenta. El balance de carbono de los materiales de construcción de origen forestal depende de factores relacionados con el sistema forestal que son sensibles las circunstancias del caso de estudio; por lo que no deberían hacerse generalizaciones. De dichos factores, algunos dependen de los modelos usados para simular el sistema forestal; tales como la contabilización del punto temporal de ocurrencia de los flujos de carbono biogénico, la perspectiva espacial para medir estos flujos y la línea de base trazada para el sistema forestal. Otros factores dependen del modelo usado para el ACV, como la elección del horizonte temporal integrado para el cálculo del impacto, el escenario de disposición final y el período de almacenamiento del carbono biogénico en los productos. Para obtener conclusiones más robustas, se recomienda que los autores de estudios utilicen al menos un método adicional al GWP que les permita evaluar las emisiones de carbono basadas en el punto temporal de su ocurrencia, así como que se apliquen horizontes temporales a largo plazo en el uso de dichos métodos. Tener en cuenta los aspectos no tradicionales estudiados en esta tesis en estudios de ACV de materiales de construcción de origen forestal puede tener una influencia significativa en su impacto climático, por lo que se recomienda que los autores expongan claramente si estos aspectos se incluyen y cómo se incluyen. También se recomienda que se analicen múltiples escenarios con una variedad de configuraciones metodológicas alternativas. Por último, se recomienda tener en cuenta los cambios tecnológicos en los análisis a largo plazo de los impactos climáticos de la construcción en existencia, utilizando factores de impacto dinámico para los procesos que trascurran en el futuro. / <p>QC 20170517</p> / EnWoBio - Engineered Wood and Biobased Building Materials Laboratory
|
7 |
Some Observations On Seismic Behaviour Of Traditional Timber Structures In TurkeyEr Akan, Asli 01 June 2004 (has links) (PDF)
This thesis is about behaviour of traditional timber structures under lateral loads in Turkey. The timber-framed houses are the products of cultural heritage of people who live in Anatolia. These structures have performed well in earthquakes throughout the history. As a result, this study intends to present the observations on the seismic behaviours of traditional timber buildings with the help of computer-generated models. In this thesis, the general characteristics of timber are examined, the earthquake problem is briefly introduced, its effects on buildings are discussed, current knowledge on the earthquake performance of traditional Turkish timber buildings is presented, and their seismic behaviours are shown by using SAP2000 to help to better understand their behaviours in an earthquake.
|
8 |
Développement d’une méthode d’optimisation multiobjectif pour la construction bois : prise en compte du confort des usagers, de l’impact environnemental et de la sécurité de l’ouvrage / Development of a multiobjective optimisation method for timber building : consideration of user comfort, environmental impact and structural safetyArmand Decker, Stéphanie 22 September 2015 (has links)
Les pays industrialisés cherchent aujourd’hui à réduire leur consommation d'énergie et à utiliser des matières premières de substitution, notamment renouvelables dont le bois fait partie. Pour promouvoir son usage, le développement de méthodes favorisant son recours dans les systèmes constructifs pour la construction multiétage est nécessaire.La conception d’un bâtiment est multicritère. Des objectifs contradictoires sont à optimiser simultanément. Des solutions de compromis Pareto-optimaux sont par exemple recherchées entre l’atteinte des meilleures performances d’usage et la limitation de l’impact environnemental du bâtiment. Ces travaux portent ainsi sur le développement d’une méthode d’optimisation multiobjectif de systèmes constructifs bois adaptés au multiétage.Des objectifs de maximisation du confort vibratoire des planchers et de minimisation des besoins de chauffage, d’inconfort thermique, de potentiel de réchauffement climatique et d’énergie grise sont pris en compte. La méthode repose sur un algorithme d’optimisation multiobjectif par essaim particulaire capable de proposer un ensemble de solutions non-dominées constituant le front de Pareto. L’espace des solutions est contraint par des exigences réglementaires nécessaires à la sécurité de l’ouvrage. L’ensemble des fonctions-objectif est modélisé sous forme de fonctions analytiques. Les sorties d’intérêt du modèle de simulation thermique dynamique sont substituées par des métamodèles.La méthode développée est mise en oeuvre sur un cas d’étude. Les résultats obtenus offrent une grande diversité dans un panel de 20 000 solutions optimales. Ces résultats constituent un support de discussion entre les différents acteurs d’un projet de construction. / Industrialised countries are seeking to reduce their energy consumption and to use alternative raw materials, including renewables such as wood. To promote its use, multi-storey timber constructive systems need the development of new design methods.Building required a multicriteria design where conflicting objectives must be optimised simultaneously. Research solutions have to achieve the best Pareto-compromise between use performance and environmental impact of the building. This work aims to develop a multiobjective optimisation method of timber multi-storey building.The objectives of maximising floor vibration comfort and minimising heating needs, thermal discomfort, global warming potential and embodied energy are taken into account. A multi-objective particle swarm optimization algorithm is used to obtain a set of non-dominated solutions which is the Pareto front. The solution space is constrained by regulatory requirements necessary for the safety of the structure. All objective-functions are modelled as analytic functions. Dynamic thermal simulation model outputs are replaced by metamodels.The developed method is implemented on a case study. The results offer a great diversity in a panel of 20 000 optimal solutions. These results provide a basis for discussion between the different actors of a construction project.
|
9 |
Exploring climate impacts of timber buildings : The effects from including non-traditional aspects in life cycle impact assessmentPeñaloza, Diego January 2015 (has links)
There is an urgency within the building sector to reduce its greenhouse gas emissions and mitigate climate change. An increased proportion of biobased building materials in construction is a potential measure to reduce these emissions. Life cycle assessment (LCA) has often been applied to compare the climate impact from biobased materials with that from e.g. mineral based materials, mostly favouring biobased materials. Contradicting results have however been reported due to differences in methodology, as there is not yet consensus regarding certain aspects. The aim of this thesis is to study the implications from non-traditional practices in climate impact assessment of timber buildings, and to discuss the shortcomings of current practices when assessing such products and comparing them with non-renewable alternatives. The traditional practices for climate impact assessment of biobased materials have been identified, and then applied to a case study of a building with different timber frame designs and an alternative building with a concrete frame. Then, non-traditional practices were explored by calculating climate impact results using alternative methods to handle certain methodological aspects, which have been found relevant for forest products in previous research such as the timing of emissions, biogenic emissions, carbon storage in the products, end-of-life substitution credits, soil carbon disturbances and change in albedo. These alternative practices and their implications were also studied for low-carbon buildings. The use of non-traditional practices can affect the climate impact assessment results of timber buildings, and to some extent the comparison with buildings with lower content of biobased building materials. This effect is especially evident for energy-efficient buildings. Current normal practices tend to account separately for forest-related carbon flows and aspects such as biogenic carbon emissions and sequestration or effects from carbon storage in the products, missing to capture the forest carbon cycle as a whole. Climate neutrality of wood-based construction materials seems like a valid assumption for studies which require methodological simplification, while other aspects such as end-of-life substitution credits, soil carbon disturbances or changes in albedo should be studied carefully due to their potentially high implications and the uncertainties around the methods used to account for them. If forest phenomena are to be included in LCA studies, a robust and complete model of the forest carbon cycle should be used. Another shortcoming is the lack of clear communication of the way some important aspects were handled. / <p>QC 20150310</p>
|
10 |
Ductility of cross-laminated timber buildings, influence of low-cycle fatigue strength and development of an innovative connectionBezzi, Stefano 24 April 2020 (has links)
This thesis is mainly focused on the seismic behaviour of cross laminated timber (CLT) buildings. The document can be subdivided into three main sections closely related to each other.
In the first part, after a short introduction on the state of the art on timber buildings regarding the constructive and legislative issues, the behaviour of CLT buildings is presented. The research is focused on the study on single shear-walls, on the multi-storey single-walls and on the behaviour of the whole buildings. The analyses are performed in order to assess the ductility level achievable by a CLT building as a result of different choices for the ductility of the connections at the foundation level. In order to estimate the ductility level, a large number of non-linear analyses were performed. This was possible thanks to a Matlab code, specifically developed, which allowed to reduce the computational burden. The results are used to evaluate a reliable set of behaviour factors to be applied in the seismic design of CLT buildings.
In the second part of thesis, the low-cyclic fatigue strengths for different typologies of dissipative timber connections are presented. The low-cyclic fatigue strength represents a key-parameter in the assessment of the seismic behaviour of timber connections. In fact, high values of ductility associated with low values of strength degradation ensure a remarkable and reliable energy dissipation without a significant loss of strength. Despite the current version of chapter 8 of Eurocode 8 requires specific values of seismic demand for timber connections in terms of low-cyclic fatigue strength, no specific provision is reported to this regard in the European Standard for the cycling testing of timber connections and assemblage in seismic design (EN 12512). In This Standard the ductility capacity and the impairment of strength are calculated as separate mechanical parameters. For this reason, a proposal of revision of European Standard EN12512 is presented and discussed.
The third and last part of the thesis describes an innovative connection for CLT buildings. This innovative connection was originally developed in order to absorb both traction and shear actions. Furthermore, a good performance has been obtained in terms of low-cyclic fatigue strength and ductility, with the aim of conceiving a connection able of satisfy the requirements of the current seismic European Standard. The design of this new connection was an iterative process, starting from some simplified numerical models. After some improvements, it was possible to obtain the expected performance levels. The strength and rigidity of the designed connection were initially obtained through numerical analysis, and then compared with the results of physical tests carried out in the Materials and Structures Testing Laboratory (MSTL), that is a part of the Department of Civil, Environmental and Mechanical Engineering (DICAM) of the University of Trento.
|
Page generated in 4.1255 seconds