Spelling suggestions: "subject:"fransfer coefficient"" "subject:"astransfer coefficient""
171 |
Energetické hodnocení obecní budovy / Energy assessment of building of municipalityJaníková, Hana January 2013 (has links)
The main objective of the master’s thesis is elaboration of energy audit within the theme of energy rating of buildings. Work consists of the beginning to the given theme including the actual legislative regulations. Another part is elaboration of the energy audit of building municipality with design and rating the measures of reduction of energy consumptions. In experimental part work deals with evaluation of building thermal envelope with use of thermograph measurement, also with quality of indoor environment within the use of building by measurement of concentration of CO2 and with heat and humidity balance.
|
172 |
Energetická optimalizace polyfunkčního objektu / Energy optimization of multifunctional buildingRulíšková, Pavla January 2014 (has links)
Contain of master´s thesis is a energy assessment of multifunctional building in Komňátka. The theoretical part deals with the analysis of legislativ documents, current technical solution and practical application to the specified building. In the practical part thesis focus on experimental determination of the heat transfer coefficient using thermography.
|
173 |
Měření součinitele přestupu tepla v kruhových minikanálech / Tubular minichannel heat transfer coefficient measurementSnášel, Jan January 2013 (has links)
The master’s thesis is describing measurement of heat transfer coefficient for heat exchanger with tubular minichannels. For understanding of the process, basic theory of heat transfer has its part in this work. The advanteges of minichannels and their clasiffication are also stated here. Another part describes the calculation for determination of heat transfer coefficient using the Wilson plot method and the method of direct determination of heat transfer coefficient. Measurement data are evaluated and comparison is made for results of both methods. This results are used for formulation of correlation equation for given flow regime.
|
174 |
Vliv provedení zateplení na rodinném domě v obci Karolínka na výdaje spojené s provozem této nemovitosti. / The Impact of Thermal Insulation of a Detached House in the Village of Karolínka on Running Expenses of this PropertyBatrla, Jan January 2014 (has links)
This thesis evaluates the influence of thermal insulation of a detached house on the expenses associated with the operation of the property. The first part describes the construction of houses from history to the present day, as well as legislation associated with the thermal insulation of buildings. The work also deals with the energy performance of buildings, energy price developments, types of thermal isolation and insulation of Houses. Thoroughly analyzes ETICS insulation systém. The second part is devoted to a particular detached house in the village Karolinka to evaluate the economic return on investment. Thermal insulation is solved in seven variants. The work includes thermal technical assessment of the condition of the original house and then heat the assessment of the options for the thermal insulation on its economic return. In conclusion, the assessment of individual variants insulation is calculated as a simple payback period.
|
175 |
Rozvoj inverzních úloh vedení tepla řešených s využitím optimalizačních postupů a vysokého stupně paralelizace / Development of Inverse Tasks Solved by Using the Optimizing Procedures and Large Number of Parallel ThreadsOndroušková, Jana January 2015 (has links)
In metallurgy it is important to know a cooling efficiency of a product as well as cooling efficiency of working rolls to maximize the quality of the product and to achieve the long life of working rolls. It is possible to examine this cooling efficiency by heat transfer coefficients and surface temperatures. The surface temperature is hardly measured during the cooling. It is better to compute it together with heat transfer coefficient by inverse heat conduction problem. The computation is not easy and it uses estimated values which are verified by direct heat conduction problem. The time-consuming of this task can be several days or weeks, depends on the complexity of the model. Thus there are tendencies to shorten the computational time. This doctoral thesis considers the possible way of the computing time shortening of inverse heat conduction problem, which is the parallelization of this task and its transfer to a graphic card. It has greater computing power than the central processing unit (CPU). One computer can have more compute devices. That is why the computing time on different types of devices is compared in this thesis. Next this thesis deals with obtaining of surface temperatures for the computation by infrared line scanner and using of inverse heat conduction problem for the computing of the surface temperature and heat transfer coefficient during passing of a test sample under cooling section and cooling by high pressure nozzles.
|
176 |
Faktory ovlivňující sprchové chlazení za vysokých teplot / Spray Cooling at High TemperaturesChabičovský, Martin January 2016 (has links)
Spray cooling of hot surfaces is used in the metallurgical industry during continuous casting, hot rolling or heat treatment. The water is sprayed on the cooled surface by the nozzle which transforms the water stream to droplets. The spray cooling of hot surfaces can be characterized as forced convection with the presence of the boiling. This physically complicated process is influenced by many factors, such as impurities and contaminants in the water, water temperature, water flow rate, droplet size, droplet impact velocity, surface temperature, surface roughness or the presence of oxides (scales) on the cooled surface. The dominant factor that affects the heat transfer during the spray cooling is the water impingement density. Other factors have a smaller but also significant effect. This doctoral thesis deals with the influence of the water temperature, surface roughness and the presence of oxides on the intensity of the spray cooling. These factors are investigated by laboratory experiments in which the hot steel surface is spray cooled. Effect of the oxide layer is also investigated by the numerical simulation. The experimental results are theoretically explained and generalized using mathematical methods.
|
177 |
Vliv provedení zateplení objektu rodinného domu v obci Újezd u Rosic na výdaje spojené s provozem této nemovitosti / The impact of executing new thermal insulation on a single-family house village Újezd u Rosic on the expenses associated with the operation of this real estateStromecký, Jiří January 2016 (has links)
The influence of the thermal insulation of a family house in the village of Újezd u Rosic and the expenses related with the operation of this property. Brief characteristics of the task and its challenges: The task will be to work on a proposal to insulate the chosen property. Based on this proposal, then evaluate the difference in cost for the operation of the property before and after insulation. The work will also evaluate the economic return on the investments made.
|
178 |
Vliv provedení zateplení rodinného domu na výdaje spojené s jeho provozem / The impact of executing new thermal insulation on a single-family house on the expenses associated with its operationLabounek, Martin January 2016 (has links)
This diploma thesis deals with insulation of the house and it's costs. First part relates to the developement of the construction, the current trends in the construction of houses, prices of energy and heating options. Next part relates with insulation system ETICS, the way of it's implementation and thermal assessment with basic names. Thermal insulation is designed in six variants. The work includes thermal assessment in original condition and the assessment of new condition modified by adding thermal insulation with it's economic return. In conclusion, the diploma thesis evaluates the payback period of insulation.
|
179 |
Engineering nanomaterials with enhanced functionalityLi, Shanghua January 2006 (has links)
This thesis deals with the engineering of novel nanomaterials, particularly nanocomposites and nanostructured surfaces with enhanced functionalities. The study includes two parts; in the first part, an in situ sol-gel polymerization approach is used for the synthesis of polymer-inorganic hybrid material and its exceptional transparent UV-shielding effect has been investigated. In the second part, electrodeposition process has been adapted to engineer surfaces and the boiling performance of the fabricated nanostructured surfaces is evaluated. In the first part of the work, polymer-inorganic hybrid materials composed of poly(methylmethacrylate) (PMMA) and zinc compounds were prepared by in situ sol-gel transition polymerization of zinc complex in PMMA matrix. The immiscibility of heterophase of solid organic and inorganic constituents was significantly resolved by an in situ sol-gel transition polymerization of ZnO nanofillers within PMMA in the presence of dual functional agent, monoethanolamine, which provided strong secondary interfacial interactions for both complexing and crosslinking of constituents. In the second part of the work, nanoengineering on the surface of copper plates has been performed in order to enhance the boiling heat transfer coefficient. Micro-porous surfaces with dendritic network of copper nanoparticles have been obtained by electrodeposition with dynamic templates. To further alter the grain size of the dendritic branches, the nanostructured surfaces underwent a high temperature annealing treatment. Comprehensive characterization methods of the polymer-inorganic hybrid materials and nanoengineered surfaces have been undertaken. XRD, 1H NMR, FT-IR, TGA, DSC, UV-Vis, ED, SEM, TEM and HRTEM have been used for basic physical properties. Pool boiling tests were performed to evaluate the boiling performance of the electrodeposited nanostructured micro-porous structures. The homogeneous PZHM exhibited enhanced UV-shielding effects in the entire UV range even at very low ZnO content of 0.02 wt%. Moreover, the relationship between band gap and particle size of incorporated ZnO by sol-gel process was in good agreement with the results calculated from the effective mass model between bandgap and particle size. The fabricated enhanced surface has shown an excellent performance in nucleate boiling. At heat flux of 1 W/cm2, the heat transfer coefficient is enhanced over 15 times compared to a plain reference surface. A model has been presented to explain the enhancement based on the structure characteristics. / QC 20101118
|
180 |
Srovnání nákladů na výstavbu budov z hlediska jejich pláště a způsobu vytápění / Comparison of costs for the construction of buildings in terms of their cladding and method of heatingSzturc, Jakub January 2022 (has links)
The thesis focuses on the cost comparison of the envelope compositions of a passive wood building depending on the type of thermal insulation used and the type of envelope composition. In the practical part, diffusion closed and diffusion open envelope compositions with different types of thermal insulation are proposed. The proposed compositions are priced and compared. The heating method and its costs are also marginally addressed.
|
Page generated in 0.0542 seconds