The goal of this project is to design a signal and data logger, which captures analog and digital signals with very long record time. The device supports multichannel complex triggering, a real-time oscilloscope-like mode and an offline mode for analyzing of previously sampled data. This project contains detailed analysis of the topic, description of hardware and software solutions and used methods. The thesis also contains verification tests and measurements. This device will be mainly used for hardware debugging of microprocessor based applications.

This master´s thesis deals with design of security system, which transmits captured video using mobile systems. There are chosen representatives of cameras and motion sensors that could be used in the construction. The thesis also deals with the theoretical design of the transmission system, which consists of a camera, a motion sensor, an USB modem and a microprocessor, that manages all operations. There is also a proposed block diagram of a communication method. The security system is designed and tested in various conditions.

This thesis deals with designing and implementation of wireless voting system based on the IQRF technology. The thesis describes mentioned IQRF technology and compares its features with others wireless technologies. It also describes the architecture design and communication protocol of the proposed system. The system consists of device conected to computer which collects data from the voting stations. The core of the thesis is the implementation of this components and implementation of control application for the computer. In conclusion, discussed the achievements and possible improvements.

This is our thesis for the course Degree Project in Electronics and Computer Engineering (IL122X). Our project was carried out at the company Westermo which is working on making industry network equipment. Westermo wanted a method for sending information from one of their network devices to a mobile device using secure wireless communication. It was first planned to be done using Bluetooth, and exchange keys through NFC. This was later changed to not just evaluate this particular situation, but to evaluate the best solution for their use-case. This report will go through our evaluation process. We will mention different possible techniques and if they can be used, then put the techniques together and form a possible solution. Our discussion will mention what we think is the best solution and why, and the way forward.

More and more people all over the world are using a USB modem to connect to the Internet. This is especially true in Sweden- which has the highest 3G coverage in Europe. Comparable to fixed broadband access, using a 3G USB modem is a wonderful experience for the customer. Increasingly, anywhere we can use our cellular phone is a place that we are able to access the Internet, even if we are traveling in a train, walking in a park, or sitting on the beach. This makes working on the move much easier. However, customers do not know if the network throughput, delay, and the cost of connectivity match their needs. Additionally, there is also the question of the time to connect to the network when there has not been some traffic for a period of time. However, the throughput, delay, and "time to connect" when using such a modem to connect to a wireless network depend on several factors. In this thesis we will examine these factors. More specifically, the thesis will analyze in detail the effects of using a USB attached network interface, in order to gain greater understanding of such an interface’s network performance. We have chosen to focus on the uplink, as it was expected to have a low throughput and it has not had as much attention as the downlink performance. / Fler och fler människor över hela världen använder ett USB-modem för att ansluta tillInternet. Detta gäller i synnerhet i Sverige, som har den största 3G-täckning i Europa.Jämförbar med fast bredband, med hjälp av ett 3G USB-modemet är en underbar upplevelseför kunden. Allt var som helst vi kan använda vår mobiltelefon är en plats som vi hartillgång till Internet, även om vi färdas i ett tåg, promenad i en park, eller sitter på stranden.Detta gör att arbeta på resande fot mycket enklare. Men kunderna inte vet om nätetgenomströmning, fördröjning, och kostnaden för anslutning passar deras behov. Dessutomfinns det också en fråga om tid att ansluta till nätverket när det inte har funnits några trafikför en tid. Men den genomströmning, fördröjning och "tid för att ansluta" när du använderett modem för att ansluta till ett trådlöst nätverk beror på flera faktorer. I denna avhandlingkommer vi att undersöka dessa faktorer. Mer specifikt avhandlingen analyserar i detaljeffekterna av att använda en USB bifogade nätverkskort, för att få större förståelse för ettsådant gränssnitt nätverk prestanda. Vi har valt att fokusera på upplänk, eftersom detförväntas ha låg kapacitet och det har inte fått lika mycket uppmärksamhet som denerlänkning prestanda.

This thesis deals with design of microprocessor controlled battery charger with support of NiCd, NiMH and Li-Ion cells. The project focus is aimed within circuits design at algorithm of charge detection implemented into microprocessor. User interface is formed by PC application which communicates with charger via USB. PC connection allows recording of charging characteristics behaviour. The result of thesis is completely designed and created battery charger including microprocessor and PC application source codes.

The text is focused on development induction heating coltroller. The motivation to create such a device was to correct deficiencies and add the necessary functionality for a device of this type. This was achieved mainly by adding the graphic display and USB interface. Graphic TFT display with buttons and a rotary encoder creates user interface. Part of the control unit is also circuit evaluateing temperature from three thermocouples. The paper dealt with the optimal solution for power supply, communication between control unit and power part, way of controlling graphical TFT display and selection of other components. The core is of course, suitable microcontroller, which manage all parts of the device.

Tato diplomová práce se zabývá návrhem elektronického informačního štítku, jehož základem je maticový LED displej. V teoretické části jsou probrány použitá rozhraní a periferie mikrokontroléru a PC a diskutuje se nad možnostmi kódování českých znaků. Dále se probírá krok za krokem návrh zařízení. Nejdříve jsou vytyčeny hlavní požadavky a funkcionalita zařízení, následuje výběr vhodných komponent a je navrženo elektrické schéma. Jádrem zařízení je mikrokontrolér Microchip PIC, pro který je dále navržen program. Nakonec je popsána a naprogramována aplikace pro MS Windows, která se se zařízením komunikuje.

Arbetet handlar om styrning och reglering av stegmotorer och permanentmagnetmotorer, genom attanvända det grafiska programmeringsspråket Labview från National Instruments (NI) tillsammansmed hårdvara i form av NI CompactRIO och NI USB datainsamlingskort. Implementeringen har sketti form av en robot med ett för uppgiften specialbyggt styrsystem, PWM – styrning av enpermanentmagnetmotor och en egenkonstruerad manöverdosa. / This report deals about controlling and regulating stepping motors and PM-motors by using thegraphical programming language NI Labview, with hardware NI CompactRIO and NI DAQ-USB.The implementation has been done by controlling a robot with a for the task built system, controllinga PM-motor by PWM and a own created controller.

<p>Arbetet handlar om styrning och reglering av stegmotorer och permanentmagnetmotorer, genom attanvända det grafiska programmeringsspråket Labview från National Instruments (NI) tillsammansmed hårdvara i form av NI CompactRIO och NI USB datainsamlingskort. Implementeringen har sketti form av en robot med ett för uppgiften specialbyggt styrsystem, PWM – styrning av enpermanentmagnetmotor och en egenkonstruerad manöverdosa.</p> / <p>This report deals about controlling and regulating stepping motors and PM-motors by using thegraphical programming language NI Labview, with hardware NI CompactRIO and NI DAQ-USB.The implementation has been done by controlling a robot with a for the task built system, controllinga PM-motor by PWM and a own created controller.</p>