A presença de antibióticos no ecossistema representa um sério risco à saúde humana e animal em virtude do desenvolvimento crescente de resistência bacteriana. Uma vez que a maioria dos antibióticos é persistente à degradação biológica, os processos oxidativos avançados são apontados como uma das tecnologias mais efetivas para decompor esses compostos em águas residuárias. A bacitracina zíncica (Bc-Zn) é um potente antibiótico constituído por uma mistura complexa de peptídeos não-biodegradáveis, conjugados ao zinco. Apesar de ser um antibiótico amplamente consumido na medicina humana e animal, é preocupante a escassez de estudos que investigam sua degradação e destino ambiental. O presente trabalho analisou a degradação da Bc-Zn através dos processos de fotólise direta e UV/H2O2 em diferentes condições de radiação UVC e concentração inicial de H2O2. Os parâmetros cinéticos rendimento quântico da fotólise, constantes cinéticas de pseudo-primeira ordem e constante cinéticas de segunda ordem foram satisfatoriamente estimados pela modelagem do sistema fotoquímico experimental. Os resultados revelaram que a fotólise direta permitiu degradar todos os congêneres da mistura de Bc-Zn nas maiores doses de radiação UVC empregadas. No entanto, não houve remoção de TOC após 120 minutos de irradiação. A adição de H2O2 acelerou substancialmente a fotodegradação do antibiótico, apresentando constantes cinéticas de pseudo-primeira ordem uma ordem de grandeza superiores às obtidas por fotólise direta. Além disso, remoção considerável de até 71% do TOC foi alcançada. A análise estatística demonstrou que a radiação UV foi um fator bem mais significativo para a fotodegradação da Bc-Zn em relação à concentração inicial de H2O2, sendo as melhores condições do processo alcançadas para a maior taxa específica de emissão de fótons (1,11×10-5 Einstein L-1 s-1). Ensaios biológicos com soluções tratadas por fotólise direta e UV/H2O2 indicaram remoção completa da atividade antimicrobiana residual, ainda que os produtos da fotodegradação tenham se mostrado não-biodegradáveis. Análises de toxicidade indicaram que o metal zinco presente no antibiótico é responsável pela a toxicidade no micro-organismo-teste Vibrio fischeri. Estudos adicionais devem ser realizados para identificar os sub-produtos formados, bem como para investigar a degradação da Bc-Zn em efluentes industriais reais. / The presence of antibiotics in ecosystems represents a serious risk to human and animal health, caused by the increase in bacterial resistance. Since most antibiotics resist to biological degradation, advanced oxidation processes are pointed out as the most effective technologies for degrading these compounds in wastewater. Zinc bacitracin (Bc-Zn) is a potent antibiotic with a complex mixture of non-biodegradable peptides conjugated to zinc. Despite being a widely used antibiotic in human and animal medicine, the scarcity of studies dealing with its degradation and environmental fate is a matter of concern. In this work, Bc-Zn degradation by direct photolysis and the UV/H2O2 process was investigated for different UVC radiation conditions and initial H2O2 concentrations. Kinetic parameters, namely the photolysis quantum yield, pseudo-first order kinetic constants and second-order kinetic constants, were satisfactorily estimated from experimental data by modeling the photochemical system. The results showed that all the congeners of the Bc-Zn mixture were photolyzed at the highest UVC doses applied, while no TOC removal was observed after 120 minutes of irradiation. The addition of H2O2 substantially accelerated Bc-Zn photodegradation, with pseudo-first order kinetic constants of one order of magnitude higher than those observed under direct photolysis. In addition, a remarkable removal of up to 71% of TOC was achieved. Statistical analyses showed that UV radiation had a much more important effect on Bc-Zn photodegradation in comparison with initial H2O2 concentration, with the best process conditions achieved for the highest specific photon emission rate (1.11×10-5 Einstein L-1 s-1). Biological assays carried out with the solutions treated by direct photolysis and UV/H2O2 revealed no residual antimicrobial activity, though photodegradation products remained non-biodegradable. In addition, toxicity analyses indicated that the zinc metal present in the antibiotic is responsible for the toxic effect on the test microorganism Vibrio fischeri. Finally, further studies should be performed to identify the by-products formed and to investigate Bc-Zn degradation in real industrial wastewater.

A presença de antibióticos no ecossistema representa um sério risco à saúde humana e animal em virtude do desenvolvimento crescente de resistência bacteriana. Uma vez que a maioria dos antibióticos é persistente à degradação biológica, os processos oxidativos avançados são apontados como uma das tecnologias mais efetivas para decompor esses compostos em águas residuárias. A bacitracina zíncica (Bc-Zn) é um potente antibiótico constituído por uma mistura complexa de peptídeos não-biodegradáveis, conjugados ao zinco. Apesar de ser um antibiótico amplamente consumido na medicina humana e animal, é preocupante a escassez de estudos que investigam sua degradação e destino ambiental. O presente trabalho analisou a degradação da Bc-Zn através dos processos de fotólise direta e UV/H2O2 em diferentes condições de radiação UVC e concentração inicial de H2O2. Os parâmetros cinéticos rendimento quântico da fotólise, constantes cinéticas de pseudo-primeira ordem e constante cinéticas de segunda ordem foram satisfatoriamente estimados pela modelagem do sistema fotoquímico experimental. Os resultados revelaram que a fotólise direta permitiu degradar todos os congêneres da mistura de Bc-Zn nas maiores doses de radiação UVC empregadas. No entanto, não houve remoção de TOC após 120 minutos de irradiação. A adição de H2O2 acelerou substancialmente a fotodegradação do antibiótico, apresentando constantes cinéticas de pseudo-primeira ordem uma ordem de grandeza superiores às obtidas por fotólise direta. Além disso, remoção considerável de até 71% do TOC foi alcançada. A análise estatística demonstrou que a radiação UV foi um fator bem mais significativo para a fotodegradação da Bc-Zn em relação à concentração inicial de H2O2, sendo as melhores condições do processo alcançadas para a maior taxa específica de emissão de fótons (1,11×10-5 Einstein L-1 s-1). Ensaios biológicos com soluções tratadas por fotólise direta e UV/H2O2 indicaram remoção completa da atividade antimicrobiana residual, ainda que os produtos da fotodegradação tenham se mostrado não-biodegradáveis. Análises de toxicidade indicaram que o metal zinco presente no antibiótico é responsável pela a toxicidade no micro-organismo-teste Vibrio fischeri. Estudos adicionais devem ser realizados para identificar os sub-produtos formados, bem como para investigar a degradação da Bc-Zn em efluentes industriais reais. / The presence of antibiotics in ecosystems represents a serious risk to human and animal health, caused by the increase in bacterial resistance. Since most antibiotics resist to biological degradation, advanced oxidation processes are pointed out as the most effective technologies for degrading these compounds in wastewater. Zinc bacitracin (Bc-Zn) is a potent antibiotic with a complex mixture of non-biodegradable peptides conjugated to zinc. Despite being a widely used antibiotic in human and animal medicine, the scarcity of studies dealing with its degradation and environmental fate is a matter of concern. In this work, Bc-Zn degradation by direct photolysis and the UV/H2O2 process was investigated for different UVC radiation conditions and initial H2O2 concentrations. Kinetic parameters, namely the photolysis quantum yield, pseudo-first order kinetic constants and second-order kinetic constants, were satisfactorily estimated from experimental data by modeling the photochemical system. The results showed that all the congeners of the Bc-Zn mixture were photolyzed at the highest UVC doses applied, while no TOC removal was observed after 120 minutes of irradiation. The addition of H2O2 substantially accelerated Bc-Zn photodegradation, with pseudo-first order kinetic constants of one order of magnitude higher than those observed under direct photolysis. In addition, a remarkable removal of up to 71% of TOC was achieved. Statistical analyses showed that UV radiation had a much more important effect on Bc-Zn photodegradation in comparison with initial H2O2 concentration, with the best process conditions achieved for the highest specific photon emission rate (1.11×10-5 Einstein L-1 s-1). Biological assays carried out with the solutions treated by direct photolysis and UV/H2O2 revealed no residual antimicrobial activity, though photodegradation products remained non-biodegradable. In addition, toxicity analyses indicated that the zinc metal present in the antibiotic is responsible for the toxic effect on the test microorganism Vibrio fischeri. Finally, further studies should be performed to identify the by-products formed and to investigate Bc-Zn degradation in real industrial wastewater.

Oxidation reactions are of prime importance at an industrial level and correspond to a huge market. Oxidation reactions are widely practiced in industry and are thoroughly studied in academic and industrial laboratories. Achievements in oxidation process resulted in the development of many new selective oxidation processes. Environmental protection also relies mainly on oxidation reactions. Remarkable results obtained in this field contributed to promote the social image of chemistry which gradually changes from being the enemy of nature to becoming its friend and savior. This study dealt with two aspects regarding oxidation process. The first aspect represented an experimental study for the partial oxidation of benzene to phenol using Pd membrane in the gaseous phase. The second part was a theoretical study for some of the advanced oxidation process (AOPs) which are applied for contaminant destructions in polluted waters. Niwa and coworkers reported a one step catalytic process to convert benzene to phenol using Pd membrane. According to their work, this technique will produce a higher yield than current cumene and nitrous oxide based industrial routes to phenol. A similar system to produce phenol from benzene in one step was studied in this work. Results at low conversion of benzene to phenol were obtained with a different selectivity from the reported work. High conversion to phenol was not obtained using the same arrangement as the reported one. High conversion to phenol was obtained using a scheme different from the one reported by Niwa et al1. It was found that producing phenol from benzene is not related to Pd-membrane since phenol was produced by passing all reactants over a Pd catalyst. Within the studied experimental conditions, formation of phenol was related to Pd catalyst since Pt catalyst was not capable of activating benzene to produce phenol. Other evidence was the result of a blank experiment, where no catalyst was used. From this experiment no phenol was produced. A kinetic model for the advanced oxidation process using ultraviolet light and hydrogen peroxide (UV/H2O2) in a completely mixed batch reactor has been tested for the destruction of humic acid in aqueous solutions. Known elementary chemical reactions with the corresponding rate constants were taken from the literature and used in this model. Photochemical reaction parameters of hydrogen peroxide and humic acid were also taken from the literature. Humic acid was assumed to be mainly destroyed by direct photolysis and radicals. The rate constant for the HA- reaction was optimized from range of values in the literature. Other fitted parameters were the rate constant of direct photolysis of hydrogen peroxide and humic acid. A series of reactions were proposed for formation of organic byproducts of humic acid destruction by direct photolysis and radicals. The corresponding rate constants were optimized based on the best fit within the range of available published data. This model doesn't assume the net formation of free radicals species is zero. The model was verified by predicting the degradation of HA and H2O2 for experimental data taken from the literature. The kinetic model predicted the effect of initial HA and H2O2 concentration on the process performance regarding the residual fraction of hydrogen peroxide and nonpurgeable dissolved organic carbon (NPDOC). The kinetic model was used to study the effect of the presence of carbonate/bicarbonate on the rate of degradation of NPDOC using hydrogen peroxide and UV (H2O2/UV) oxidation. Experimental data taken from literature were used to test the kinetic model in the presence of carbonate/bicarbonate at different concentrations. The kinetic model was able to describe the trend of the experimental data. The kinetic model simulations, along with the experimental data for the conditions in this work, showed a retardation effect on the rate of degradation of NPDOC due to the presence of bicarbonate and carbonate. This effect was attributed to the scavenging of the hydroxyl radicals by carbonate and bicarbonate. A kinetic model for the degradation of methyl tert-butyl ether (MTBE) in a batch reactor applying Fenton's reagent (FeII/ H2O2) and Fenton-like reagent (Feo/ H2O2) in aqueous solutions was proposed. All of the rate and equilibrium constants for hydrogen peroxide chemistry in aqueous solutions were taken from the literature. Rate and equilibrium constants for ferric and ferrous ions reactions in this model were taken from the reported values in the literature, except for the rate constant for the reaction of ferric ions with hydrogen peroxide where it was fitted within the range that was reported in the literature. Rate constant for iron dissolution was also a fitted parameter. The mechanism of MTBE degradation by the hydroxyl radicals was proposed based on literature studies. The kinetic model was tested on available experimental data from the literature which involved the use of Fenton's reagent and Fenton-like reagent for MTBE degradation. The degradation of MTBE in Fenton's reagent work was characterized to proceed by two stages, a fast one which involved the reaction of ferrous ions with hydrogen peroxide (FeII/H2O2 stage) and another, relatively, slower stage which involved the reaction of ferric ions with hydrogen peroxide (FeIII/H2O2 stage). The experimental data of MTBE degradation in the FeII/H2O2 stage were not sufficient to validate the model, however the model predictions of MTBE degradation in the FeIII/H2O2 stage was good. Also, the model was able to predict the byproducts formation from MTBE degradation and their degradation especially methyl acetate, and tert-butyl alcohol. The effect of each proposed reaction on MTBE degradation and the byproducts formation and degradation was elucidated based on a sensitivity analysis. The kinetic model predicted the degradation of MTBE for Fenton-like reagent for the tested experimental data. Matlab (R13) was used to solve the set of ordinary nonlinear stiff differential equations that described rate of species concentrations in each advanced oxidation kinetic model. Niwa, S. et al., Science 295 (2002) 105