The thermal evolution of pyroclastic density currents (PDCs) is the result of entrainment of ambient air, particle concentration, and initial eruptive temperature, which all impact PDC dynamics and their hazards, such as runout distance. The associated hazards and opaqueness of PDCs make it impossible for in-situ entrainment efficiencies or concentration measurements that would provide critical information on the thermal evolution and physical processes of PDCs. The thermal evolution of explosive eruptive events such as volcanic plumes and pyroclastic density currents (PDCs) is reflected in the textures of the material they deposit. A multiscale model is developed to evaluate how the rinds of breadcrust bombs can be used as a unique thermometer to examine the thermal evolution of PDCs. The multiscale, integrated model examines how bubble growth, pyroclast cooling, and dynamics of PDC and projectile pyroclasts form unique pyroclast morphology. Rind development is examined as a function of transport regime (PDC and projectile), transport properties (initial current temperature and current density), and pyroclast properties (initial water content and radius). The model reveals that: 1) rinds of projectile pyroclasts are in general thicker and less vesicular than those of PDC pyroclasts; 2) as the initial current temperature decreases due to initial air entrainment, the rinds on PDC pyroclasts progressively increase in thickness; and 3) rind thickness increases with decreasing water concentration and decreasing clast radius. Therefore, the modeled pyroclast’s morphology is dependent not only on initial water concentration but also on the cooling rate, which is determined by the transport regime. The developed secondary thermal proxy is then applied to the 2006 PDCs from the Tungurahua eruption to constrain the entrainment efficiency and thermal evolution of PDCs. A three-dimensional multiphase Eulerian-Eulerian-Lagrangian (EEL) model is coupled to topography and field data such as paleomagnetic data and rind thicknesses of collected pyroclasts to study the entrainment efficiency and thus the thermal history of PDCs at Tungurahua volcano, Ecuador. The modeled results that are constrained with observations and thermal proxies demonstrate that 1) efficient entrainment of air to the upper portion of the current allows for rapid cooling, 2) the channelized pyroclastic density currents may have developed a stable bed load region that was inefficient at cooling and 3) the PDCs had temperatures of 600-800K in the bed load region but the upper portion of the currents cooled down to ambient temperatures. The results have shown that PDCs can be heterogeneous in particle concentration, temperature, and dynamics and match observations of PDCs down a volcano and the thermal proxies. Lastly, the entrainment efficiencies of PDCs increases with increasing PDC temperature and entrainment varies spatially and temporally. Therefore, the assumption of a well-mixed current with a single entrainment coefficient cannot fully solve the thermal evolution and dynamics of the PDC.

Includes appendix on CD-ROM (p. 157). / Thesis (Ph. D.)--University of Hawaii at Manoa, 2004. / Includes bibliographical references (leaves 158-175). / Also available by subscription via World Wide Web / xiv, 175 leaves, bound ill. (some col., one folded), maps (some col.) 29 cm. +

Thesis (Ph. D.)--Oregon State University, 2006. / Includes map in pocket. Printout. Includes bibliographical references (leaves 170-185). Also available on the World Wide Web.

Volcanic eruptions pose hazards to life and insfrastructure, and contribute to the resurfacing of earth and other planetary bodies. Lavas and magmas are multi-phase suspensions of silicate melts (liquids), solid crystals, and vapor bubbles, and solidify into glass and rock upon cooling. The interactions between phases place important controls on the dynamics and timescales of magma and lava transport and emplacement. The purpose of this thesis is to explore the role of multiphase interactions in controlling eruption dynamics and inform conceptual and numerical models for hazard prediction. In Chapters 1 and 2, centimeter to meter scale analog experiments are used to explore the multi-phase rheological properties and flow behaviors of bubble- and particle-bearing suspensions. Optical imaging of dam-break experiments presented in Chapter 1 expand existing experimental parameter ranges for lava analogs to higher bubble concentrations than existing datasets (up to 82% by volume bubbles and 37% by volume particles). I develop a constitutive relationship for threephase relative viscosity, and demonstrate that at the low strain-rate conditions relevant to many natural lava flows, accounting for the rheological effect of bubbles can result in the prediction of slower runout speeds. Chapter 2 expands upon the work of Chapter 1 using different analog materials observed using nuclear magnetic resonance imaging (MRI) phase-contrast velocimetry (PCV) to measure velocity in the flow interior of three-phase dam-break experiments. I find that for high-aspect ratio particles (sesame seeds), phase segregation into shear bands readily occurs, even at low particle fraction (20%) and results in strain localization. I suggest that the presence of shear bands can lead to faster flow runout than predicted using assumptions of bulk rheology. Chapter 3 analyzes thermal infrared (IR) time-lapse photography and videography of Hawaiian to Strombolian explosive activity during the 2021 eruption of Cumbre Vieja volcano, La Palma, Canary Islands, Spain. Images are analyzed to find time series of apparent plume radius, velocity, and apparent volume flux of high-temperature gas and lava. I compare with other measures of eruptive activity, including remote observations of plume height, SO₂ flux, effusive flux, tremor, and events at the volcano edifice including edifice collapses and the opening of new vents. I find correlations between tremor and explosive flux, but no correlation with SO2 flux or effusive flux, which I interpret as evidence of bubble segregation, highlighting the role of phase segregation and temporal variability in material properties in natural systems. Finally, in Chapter 4, I develop a novel finite element model to explore the interaction between a viscous flow with a solidified crust, and the effect of these interactions on lava flow and lava dome emplacement. I develop a model that couples a temperature-dependent viscous interior with an elastic shell flowing into air, water, or dense atmospheres. The model expands upon existing numerical simulations used in volcanology to have direct applications to lava flows and domes on the sea floor, which accounts for a large portion of the volcanism on Earth, and volcanism on other planetary bodies. Additionally, the formation of levees or solidified flow fronts that fracture and lead to a restart of flow. These lava flow breakouts pose a significant hazard, but there are currently no volcanological community codes capable of using a physics-based approach to predict the timing or location of breakouts. The model in Chapter 4 is the first to allow for assessment of the likelihood of failure at the scale of a flow lobe. Chapter 4 describes the model formulation and verification, and validation against centimeter-scale molten basalt experiments. The dissertation as a whole integrates work using a variety of methods including analog experiments, observations of natural eruptions, and numerical simulations to contribute to our understanding of the effects of multi-phase interactions on volcanic eruptions.

Non-linear volcanic and magmatic processes control the occurrence and behavior of volcanic eruptions. Consequently, understanding the responses of volcanic systems to processes of different length scales, timescales, and magnitudes is critical to interpreting ancient deposits, understanding current eruption dynamics, and predicting future activity. Here I present the results of three studies wherein analytical geochemistry, experimental petrology, and turbulent flow analysis describe otherwise obscured volcanic processes. Injections of new magma are common events in magma chambers. Recharging magma can change the chamber composition and temperature and may facilitate assimilation of country rock. Plagioclase phenocrysts provide an opportunity to examine recharge and assimilation processes, because their compositions are sensitive to temperature and their Sr isotopic ratios can record compositional variations in the chamber. Chemical and isotopic microanalyses of crystals from 7 eruptions of El Chichón Volcano, Mexico, reveal that recharge and assimilation events are very common and mixing is efficient, but individual events seldom affect the entire chamber. During every eruption, magma decompresses and ascends through a conduit from a chamber at depth to a vent at the surface. Changes in pumice textures during the 1800 ¹⁴C yr BP eruption of Ksudach Volcano, Kamchatka, suggest that conduit structure changed following caldera collapse. Decompression experiments show that the post-collapse pumice decompressed at ~0.0025 MPa/s, compared to pre-collapse decompression rates of >0.01 MPa/s. By balancing those results with eruptive mass fluxes I quantify the effects of caldera collapse on a conduit, and show that collapse resulted in a conduit with a very broad base and narrow vent. Turbulent air entrainment controls whether an eruption column rises buoyantly or collapses to generate pyroclastic flows. Through extensive re-evaluation of video and photographs of the 18 May 1980 eruption of Mount St. Helens, I report the first measurements of the turbulent velocity field of a volcanic column and show that changes in its turbulence reflect changes in eruption behavior. Those results indicate collapse was caused by a reduction in eddy size and turbulent air entrainment initiated by an increased vent size and the development of a buoyant annulus surrounding a dense, collapsing core. / text

This study is an effort to characterize the magma sources, plumbing system, and eruptive behavior of Mount Hood, a low-explosivity recharge-dominated volcano in the Oregon Cascades. The three manuscripts in this dissertation make use of melt inclusion data, phenocryst compositions, and whole rock petrology and geochemistry to build a schematic model of plumbing, mixing, and eruption at Mount Hood. Volatile contents in melt inclusions were measured by Fourier Transform Infrared Spectroscopy (FTIR) and Secondary Ion Mass Spectometry (SIMS). These measurements indicate that the pre-eruptive volatile contents at Mount Hood are comparable to concentrations in more explosive volcanoes, and do not sufficiently explain the low explosivity of Mount Hood. Measured H₂O contents were also used to test the validity of multiple different hygrometers. Various geothermobarometers were applied to the melt inclusions and phenocrysts from Mount Hood, and demonstrate that pre-eruptive temperatures increase by 100-150 ̊C immediately after mafic recharge, which occurs days to weeks prior to eruption and is accompanied by a 5-10 fold decrease in magma viscosity. Numerical simulations of magma ascent indicate that magma fragmentation is significantly delayed with this magnitude of pre-eruptive heating, which reduces the likelihood of explosive eruption. Analyses of amphibole demonstrate two markedly different populations, which correspond to different magma compositions, temperatures, and pressures. Pressure and temperature calculations were compared to other geothermobarometers to crosscheck the validity of these results and generally agreed well. Trace element concentrations in lavas, enclaves, and inclusions from Mount Hood confirm previous models for simple binary mixing at Mount Hood. A linear regression technique for extrapolating the major element contents of the mixing endmembers works acceptably well to characterize the trace element budgets of these endmembers. Additionally, we observe that the "recharge filter" that is responsible for the compositionally monotonous lavas at Mount Hood is also the likely cause of long-term low explosivity, and is indicative of a two-part magma plumbing system that may be a general model for a number of other recharge-dominated arc volcanoes. The results presented in this dissertation, in concert with previous results by other authors, converge on a generally consistent model for the production, hybridization, and eruption of intermediate lavas at Mount Hood and elsewhere. / Graduation date: 2012 / Access restricted to the OSU Community at author's request from Sept. 16, 2011 - March 16, 2012

Volcanogenic lightning has a long documented history in the scientific field, though its origins are still poorly understood. The interactions leading to electrification of ash plumes is essentially a function of the microphysics controlling and affecting ash particle collisions. This thesis presents measurements made on charged particle interactions in a fluidized bed, with large-scale applications to the phenomenon of volcanogenic lightning and charged particle dynamics in volcanic plumes. Using a fluidized bed of ash samples taken from Ecuador's Volcán Tungurahua, particles are introduced to a collisional environment, where they acquire an associated polarity. A charged copper plate is used to collect particles of a given polarity, and particle size distributions are obtained for different weight fractions of the ash. It is observed that relatively smaller particles acquire a net negative charge, while larger particles in the sample charge positively. This is a well-documented occurrence with perfectly spherical, chemically identical samples, but this work represents one of the first applications of the principle to volcanic ash. Image analysis is preformed to determine the size distribution associated with specific polarities, and the associated minimum charge on each particle is calculated based on the plate collection height and particle size. We also present results that demonstrate the relationship between particle collisions and the amount of charge exchanged. Using techniques developed to examine the collision rate within a flow, combined with the charging rates determined from this experiment, we determine a maximum charge exchange rate of 1.28±0.23 electrons transferred per collision.

La perméabilité est une propriété essentielle notamment pour déterminer la nature explosive des volcans, ainsi que pour de nombreuses autres applications scientifiques et industrielles dans les environnements où l'écoulement du fluide est une préoccupation majeure. Combinant des méthodes expérimentales de déformation des roches en laboratoire, des approches de terrain, de la modélisation numérique, et des analyses systématiques de microstructure, ce travail a mis en évidence le caractère complexe de la formation et la destruction des réseaux poreux dans le magma et des roches volcaniques. La compétition entre les processus dilatants (qui augmentent la porosité) et compactants (qui la diminuent) exerce une influence sur les propriétés de transport des fluides à la fois dans le magma et dans la roche volcanique solidifiée. Ces processus incluent la vésiculation et la croissance des bulles dans le conduit, la rupture et la compression du magma, la fracturation issue du refroidissement et fracturation induite par le transport, ainsi que la déformation pendant ou après la mise en place des matériaux, et la densification par frittage. / The permeability of various volcanic materials is an essential parameter governing the explosive behaviour of volcanic systems, as well as being important in many other scientific and industrial applications in environments where fluid flow is a major concern. Combining experimental rock deformation methods with field measurements, numerical modelling, and systematic analyses of rock microstructure, this work explores the complexities involved in the formation and destruction of porous networks in magma and volcanic rocks, addressing how permeability can evolve in volcanic systems. Competition between dilatant processes (which increase porosity) and compactant processes (which decrease porosity) influences the fluid transport properties both in the conduit-dwelling magma and in solidified edifice rock. These processes include (but are not limited to) vesiculation and bubble growth in the conduit, fracture and compaction of magma, post-emplacement thermal or mechanical fracturing, strain-induced deformation, and viscous sintering.

Title from PDF of title page. / Document formatted into pages; contains 200 pages. / Thesis (M.A.)--University of South Florida, 2003. / Includes bibliographical references. / Text (Electronic thesis) in PDF format. / ABSTRACT: How people pereceive the risks associated with natural hazards contributes to their willingness to take protective action. Such action may be constrained by prevailing socio-economic and place-specific conditions that restrict or inform the choice of protective measures available to the individual. Vulnerability to the impacts of extreme geophysical events increases when the range of alternatives is limited or misinformed. Many evacuees from a potentially violent volcanic eruption in Ecuador returned to their home town of Banos while it was still under an evacuation order in 2000 and considered to be a high risk area by officials. / ABSTRACT: The research examined four main questions: (1) What economic conditions confronted Baños evacuees? (2) What political or other social events occurred while they were evacuated that limited their perceived range of options? (3) What information was available about prior eruptions of the volcano and other local natural hazards? and (4) What were the characteristics of the economic base of Baños? These questions were investigated using data from interviews with evacuees, government and non-governmental officials, census and other statistical information, scholarly texts and newspaper reports. The research suggests that economic conditions made it extremely difficult for people to relocate to other communities. When a violent eruption did not occur immediately, and few direct impacts of the eruptions were experienced in Banos, many people chose to return home in an effort to reestablish themselves economically. / ABSTRACT: These people perceived the volcano hazard in Baños to be far less threatening than the economic destitution associated with evacuation. This perception may have been influenced by factors other than the socio-economic context, including efforts of political leaders and tourist business owners to effect the town's economic recovery. These efforts included an aggressive publicity campaign that minimized the risk posed by the volcano. Besides encouraging tourists to return, the campaign also encouraged evacuees to do so. Finally, among some residents, religious beliefs may have contributed to perceptions that they would not be harmed in the event of an explosive eruption. / System requirements: World Wide Web browser and PDF reader. / Mode of access: World Wide Web.

No description available.