SAMMANFATTNING Medvetenhet och oro kring miljöeffekter från utsläpp av växthusgaser och de minskande resurserna av icke förnybara energikällor har ökat de senaste årtiondena. Utvecklingen av ny teknologi för förnybar energi har drivits fram globalt som ett svar på denna oro. Det har skett stora framsteg i produktion av el och värme från sol, vind, hav, vattenkraft, biomassa, geotermiska resurser, biobränslen och väte. Följaktligen har utvecklingen av energi-lager blivit en viktig del för integration av förnybar energi i systemen. Det är gynnsamt för hela försörjningskedjan, för pålitlighet och bättre stabilitet i leveranser och distribution, och för ökad el-kvalitet. I uppsatsen undersöks en optimal energidesign för ett kombinerat system med vattenkraft och vindkraft inklusive ett lager i form av en damm. Vatten som pumpas upp till lagret har en stor och balanserande potential för att få in en högre grad förnybar energi i energisystemen. Detta är nödvändigt då dessa energikällor är intermittenta och variabla till sin natur. Ett av de studerade objekten är ett vattenkraftverk med pumpad damm, Tehri i Uttarakhand, Indien. Systemets totala verkningsgrad om 93 % diskuteras utifrån förluster såväl som potentialen för vind och dess inverkan. Vind-data är hämta från National Institute of Wind Energy (NIWE) och har analyserats med programmen MATLAB och WindPro. Det slutligen valda området för exploatering av vindkraft blev Ramakkalmedu, Idukki district, Kerala, Indien. Efter valet av plats valdes tre olika vindturbiner ut för analys; Siemens SWT-3.2-113 3.2 MW, Enercon E-126 4.2MW, och Enercon E-126 7.58MW. Analysen består av flera delar; vindparks-modellering, beräkning av buller-generering från vindkraften, beräkning av årlig energi-generering - Annual Energy Production (AEP), kapacitetsfaktor, vindparkens effektivitet med hänsyn tagen till lagret/dammens variation av bas-last. Resultat har erhållits från alla tre turbinerna och den övergripande slutsatsen är att kombinationen med vatten- och vindkraft med lagring av vatten som pumpas upp vid behov är en tillfredsställande metod för att möta belastningstoppar, vilket valideras av denna uppsats.   Nyckelord: pumpade vattenkraftdammar, vindkraftparker, energi lager, förnybar energi. / ABSTRACT  Awareness and concern regarding the environmental effects of greenhouse gas emissions and depletion of non-renewable energy sources has increased over the last decades. A considerable development of new technology for renewable energy has occurred globally as an answer to this concern. There has been a major progress in production of electricity and heat generated from solar, wind, ocean, hydropower, biomass, geothermal resources, and biofuels and hydrogen. Consequently, the development of energy storages has become an imperative part, for integration of renewable energy. It is beneficial for the entire supply chain, for dependability and better stability, and for enhanced quality of electrical power. This thesis is exploring an optimal energy design for a system of pumped hydro-wind power plants including storage. Solutions with Pumped Hydro Storages have a great potential for their balancing role necessary for a higher degree of renewable energy sources, RES, in the energy systems because of the intermittent and variable nature of these sources. Tehri pumped hydro storage plant, in Uttarakhand, India is one of the objects studied in this thesis. The systems total efficiency of 93%, calculated from head losses, is discussed as well as wind potential and its impact. Wind data is obtained from National Institute of Wind Energy (NIWE) and analysed using the software tools MATLAB and WindPro. The finally chosen area explored for wind potential is Ramakkalmedu, Idukki district, Kerala, India. After selection of site within the area, three different turbines; Siemens SWT-3.2-113 3.2 MW, Enercon E-126 4.2MW, and Enercon E-126 7.58MW were considered for analysis. The analysis consists of several parts; Wind farm modelling, Noise estimation of Wind Park, estimation of Annual Energy Production (AEP), Capacity factor, Wind park efficiency with respect to the storage/reservoir´s base load variation. Results are achieved for all three turbines. The overall conclusion is that combined hydro and wind power with a pumped storage, is a satisfactory method for bulk energy store to address peak loads, which is validated by this thesis.   Keywords: Pumped Hydro, Wind farm, Energy Storage, Renewable Energy.

This thesis focuses on providing the means to use vertical-axis wind turbines (VAWTs) in wind farms as an alternative form of harnessing wind energy in offshore and urban environments where both wake and acoustic effects of turbines are important considerations. In order for VAWTs to be used in wind farm layout analysis and optimization, a reduced-order wake model is needed to calculate velocities around a turbine quickly and accurately. However, a VAWT wake model has not been available to accomplish this task. Using vorticity data from computational fluid dynamic (CFD) simulations of VAWTs and cross-validated Gaussian distribution and polynomial surface fitting, a wake model is produced that can estimate a wake velocity deficit of an isolated VAWT at any downstream and lateral position based on nondimensional parameters describing the turbine speed and geometry. When compared to CFD, which takes over a day to run one simulation, the wake model predicts the velocity deficit at any location with a normalized root mean squared error of 0.059 in about 0.02 seconds. The model agrees with two experimental VAWT wake studies with a percent difference of the maximum wake deficit of 6.3% and 14.6%. Using the actuator cylinder model with predicted wake velocities of multiple turbines, aerodynamic loads can be calculated on the turbine blades to estimate the power production of a VAWT wind farm. As VAWTs could be used in urban environments near residential areas, the noise disturbance coming from the turbine blades is an important consideration in the layout of a wind farm. Noise restrictions may be imposed on a wind farm to limit the disturbance, often impacting the wind farm's power producing capability. Two specific horizontal-axis wind turbine farm designs are studied and optimized using the FLORIS wake model and an acoustic model based on semi-empirical turbine noise calculations to demonstrate the impact a noise level constraint has on maximizing wind farm power production. When a noise level constraint was not active, the average power production increased, up to 8.01% in one wind farm and 3.63% in the other. Including a noise restriction in the optimization had about a 5% impact on the optimal average power production over a 5 decibel range. By analyzing power and noise together, the multi-modality of the optimization problem can be used to find solutions were noise impact can be improved while still maximizing wind farm power production.

In recent years, the popularity of wind energy has grown. It is starting to play a large role in generating renewable, clean energy around the world. In New Zealand, there is increasing recognition and awareness of global warming and the pollution caused by burning fossil fuels, as well as the increased difficulty of obtaining oil from foreign sources, and the fluctuating price of non-renewable energy products. This makes wind energy a very attractive alternative to keep New Zealand clean and green. There are many issues involved in wind farm development. These issues can be grouped into two categories - economic issues and environmental issues. Wind farm developers often use site selection process to minimise the impact of these issues. This thesis aims to develop GIS based models that provide effective decision support tool for evaluating, at a regional scale, potential wind farm locations. This thesis firstly identifies common issues involved in wind farm development. Then, by reviewing previous research on wind farm site selection, methods and models used by academic and corporate sector to solve issues are listed. Criteria for an effective decision support tool are also discussed. In this case, an effective decision support tool needs to be flexible, easy to implement and easy to use. More specifically, an effective decision support tool needs to provide users the ability to identify areas that are suitable for wind farm development based on different criteria. Having established the structure and criteria for a wind farm analysis model, a GIS based tool was implemented using AML code using a Boolean logic model approach. This method uses binary maps for the final analysis. There are a total of 3645 output maps produced based on different combination of criteria. These maps can be used to conduct sensitivity analysis. This research concludes that an effective GIS analysis tool can be developed for provide effective decision support for evaluating wind farm sites.

The number of integrated wind farms into the power system is increasing as well as the total installed wind power capacity, which may cause voltage stability concerns. Additionally, there are European Transmission System Operators (TSOs) that do notinvolve wind farms in contributing to the voltage control in any significant extent. In the on-going project by the European Network of Transmission System Operators for Electricity (ENTSO-E), to update the European grid requirements, this will probably be changed. The aim of this Master thesis is to demonstrate the voltage variations in the high voltage grid during different operational conditions. Thereafter, clarify when high voltages may occur at the connection point of the studied wind farm. Furthermore, it is investigated whether the wind farm is able to regulate the voltage in the cases when high voltages occur. The load flow and switching studies are performed with the software tool Power System Simulator for Engineering (PSS/E) version 32.1.1. The grid model represents a part of the Swedish high voltage grid. Since voltage stability often is a local issue, special modelling aspects has been performed at the hydropower generators in the close-located area of the wind farm. The main conclusions of this Master thesis are that high voltages is associated with low load situations, i.e., mostly during summer nights. Furthermore, the studied close-located reactor is not able to keep the voltage within desired level by itself. Finally, it has been shown that the wind farm is technically able to contribute to the voltage stability in the close-located area. But since wind power is an intermittent power source it makes the voltage regulating capacity less reliable compared to hydropower. The results and conclusions given in this Master thesis have also been summarized in a conference paper for The 11th International Workshop on Large-Scale Integration of Wind Power into Power Systems as well as on Transmission Networks for Offshore Wind Power Plants, see Lidström et al [35].

Since large scale unscheduled tripping of wind power generation could lead to power system stability problem. Thus network interconnection regulations become more rigid when the wind power penetration reaches a non-neglible portion of the total power generation. This thesis presents a comparison of five different low voltage ride through (LVRT) capability enhancement technologies, i.e., additional rotor resistance, DC bus chopper, crowbar on rotor, the combination of above schemes, and grid voltage support by controlling grid side converter. System simulations are performed under Digsilent environment with model and control blocks provided by the package. Additional models are developed to implement the LVRT enhancement schemes studied. A Doubly-Fed Induction Generator (DFIG) with pitch control is used to simulate different system fault scenarios with different voltage sag magnitude and duration time. Simulation results indicate that different enhancement schemes provide various levels in relieving DC bus overvoltage, rotor winding overcurrent, and overspeed problems, and the method combines all tested schemes seems to provide the best result.

As wind exploitation gains prominence in the power industry, the extensive use of this intermittent source of power may heavily rely on our ability to select the best combination of wind farming sites that yields maximal reliability of power systems at minimal cost. This research proposes a general method to minimize the wind park global power output variance by optimally distributing a predetermined number of wind turbines over a preselected number of potential wind farming sites for which the wind patterns are statistically known. The objective is to demonstrate the benefits of diversification for the reliability of wind-sustained systems through the search for steadier overall power outputs. Three years of wind data from the recent NREL/3TIER study in the western US provides the statistics for evaluating each site for their mean power output, variance and correlation with each other so that the best allocations can be determined. Some traditional reliability indices such as the LOLP are computed by using sequential Monte Carlo simulations to emulate the behavior of a power system uniquely composed of wind turbines and a load modeled from the 1996 IEEE RTS. It is shown that configurations featuring minimal global power output variances generally prove the most reliable for moderate load cases, provided the sites are not significantly correlated with the modeled load. Under these conditions, the choice of uncorrelated/negatively correlated sites is favored. The correlations between the optimized global wind power outputs and the modeled load are studied as well.

The interest in the utilization of offshore wind power is increasing significantly. Due to the shortage of in-land locations for wind farm and the wind speed offshore is potentially higher than that of onshore, which leads to a much higher power production. In this thesis a large offshore wind farm is modeled using Matlab simulation package. In the simulations active stall regulated wind turbines driving fixed speed asynchronous generators are used. Two different types of interconnections are modeled and compared, one is the Voltage Source Converter (VSC) based HVDC link and the other one uses high voltage AC (HVAC) cable interconnection. Transmission faults are simulated in each system and the transient response are examined. Three phase fault and single line to ground fault are used to compare the performance of the VSC based HVDC interconnection system and HVAC interconnection. It is found that compared to the traditional HVAC transmission, the VSC based HVDC transmission would have better performance under various system disturbances.

Large off-shore wind farms raise the concern of widespread tripping of off-shore wind generator in the presence of system faults and corresponding voltage dips that could potentially cause system wide blackout. In this thesis an offshore wind farm and three different types of power transmission are modeled and studied using simulation software. Off-shore wind farm composed of fixed speed induction generators and HVAC interconnection, HVAC interconnection plus STATCOM and HVDC interconnections are studied. Onshore grid faults are simulated for each interconnection. Voltage tolerance curves are established to assess fault ride through capability of each interconnection and compared with different grid transmission ride through capacity required by grid operator.

The supply of energy is a key factor in modern societies. As the old fossil sources for energy are dwindling, conflicts arise between competing nations and regions. Fossil energy sources also contribute to the pollution of the environment and emission of greenhouse gases. With renewable energy sources many of these drawbacks with fossil fuels can be eliminated as the energy will be readily available for all without cost or environmental impact. Combining the renewable energy sources will be very effective, particularly in commercial areas where lake of electricity is high. The cost of combining onshore wind and solar power plant is affordable. Furthermore there is no power failure or load shedding situation at any times. When it is manufactured in a large scale, cost of this integrated natural resources power generation system is affordable. Moreover there is no power failure or load shedding situation at any times. Therefore, it is the most reliable renewable power or electricity resources with less spending and highly effective production. ref [1]. The thesis work would take planning of offshore renewable plant (Lillgrund) with considering the resources of renewable power. The study would take in account combining the Lillgrund wind farm with solar system and take close look into the advantage and disadvantage of combining the renewable resources together and figure out if such station can work in proper way and provide sufficient power production. The study would take in account the effect of each resource on other resource, also calculations would be done. The study site is Lillgrund in south of Sweden. The Lillgrund wind farm is the most important offshore wind power plant installed in Sweden with a total capacity of 110 MW, corresponding to 48 turbines. ref [2].

Grid codes are becoming more demanding on power generating units due to the factthat the complexity of the power grid is increasing. The penetration of wind powerhas grown over the last years and it is clear that wind farms need to be addressedwith the same type of grid codes as conventional generation units. There is howeveran undeniable difference between the technology in conventional synchronousgeneration units, and the asynchronous generation units in wind farms. This thesis has reviewed the current grid code in Sweden and compared it to the newcode proposed by ENTSO-E, “the Requirements for Generators”, in the aspect ofwind farms with an installed power of 30 MW or more. The comparison has beencomplemented by an analysis of how wind farms of two different technologies(Doubly fed induction generators and full power converters) can meet therequirements and technical proposals have been given on how to be able to meetcompliance with the new grid codes. The Requirements for Generators contains many non-exhaustive and optionalrequirements, because of this it has been difficult to, at this stage, exactly point outthe technical impact on the grid connection of future wind farms in Sweden. For manyof the requirements in the Requirements for Generators there is no equivalent in theSwedish Grid Code (SvK FS2005:2) but counterparts can thus be found in existingpractices and therefor does not imply any major differences for the industry. The requirements of frequency regulation, synthetic inertia and reactive powercapability are the main components of the RfG which will require additional softwareand hardware installations for future wind farms in Sweden.