The IEEE802.15.4 Low Rate-Wireless Personal Area Network (LR-WLAN) is characterized by its low power consumption, low cost, and reliable data transfer. LR-WPAN can be used for security monitoring, by automatically setting various sensors which can be placed anywhere in the factory or home. This work implements baseband signal processing and circuit design for the 868/915MHz mode of the IEEE802.15.4 LR-WPAN. The development processes include algorithm design, system simulation, FPGA implementation and system measurements. The receiver algorithm includes packet detection, phase mapping, frequency offset estimation, energy detection, synchronization, despreading and differential decoding. All algorithms are completely described herein. The system simulation match the required specifications after running the algorithms. Additionally, algorithms are composed by the Verilog Hardware Description Language (VHDL) form. The process is designed according to the hardware to identify exactly each link . The simulations performed in this work include behavioral simulation and gate level simulation. Finally, the program is uploaded to the FPGA to verify results of the procedures is verified by Matlab, by determining the effects of transmission on the channel signal, including idle signals, initial phase, frequency offset and noise. The frequency offset arises when the oscillators of the transmitter and receiver do not match. The transmitter signal from the logic analyzer is then input to the FPGA. The signal sent from the logic analyzer is tested to determine whether it retains the original transmission signal homology. Finally, a LR-WPAN baseband circuit is successfully developed through by the above procedures.

Currently, wireless communication technologies are expected to be widely employed for in-vehicle communication where in-vehicle communication is built upon the interactions of different parts inside the vehicle. This communication is to enable a variety of applications for driver and passenger needs.  To have improved driving assistance, development of in-vehicle applications is very much needed. At present, intelligent systems inside the vehicle are mostly dominated by the wired technologies. The possibilities of wireless communication have inspired us and made an opportunity to analyse replacements for wired communication within a vehicle. In this connection, the scope of our thesis is to define the in-vehicle applications which are preferred by the wireless technologies, to define the applications using wired technologies which could be replaced by the wireless technologies and to identify those applications which are difficult to implement by the wireless technologies.   In-vehicle wired networks; and problems of these wired networks, along with several existing applications, have been discussed at the initial stage of this thesis for the purpose of having a clear understanding. After that, existing In-vehicle wireless applications and several challenging applications have also been studied. Studies have been done on the most important wireless technologies with their respective specifications. The requirement of establishing wireless communication has also been explained. Finally, an analysis has been done according to the requirements of the applications and verification of their possible reliance on the wireless technologies.   In a brief, comparable studies have been done among the wireless technologies to assess their current and future fitness for In-vehicle applications. The thesis concludes with some recommendations regarding when wireless technologies might be suitable for some in-vehicle applications to replace the wired technologies.

This report presents an investigation into some merging options between an upper-layer Bluetooth (BT) protocol stack with a lower-layer ECMA-368/9 Ultra Wideband (UWB) radio connection. A Bluetooth over Ultra Wideband (BToUWB) system is implemented by channelling an existing compliant Bluetooth connection’s data over an Ultra Wideband Medium Access Control (MAC) and Physical (PHY) layer radio channel. The aim of this project is to provide a description of the methodology used to create a BToUWB link and evaluate some advantages pertaining to the merger between the two Wireless Personal Area Network (WPAN) technologies. Prior to channelling data over a UWB connection, a compliant Bluetooth and UWB connection were configured between two Linux enabled computers by use of Bluetooth and UWB enabled Universal Serial Bus (USB) dongles. BlueZ, the official Bluetooth stack for Linux, were used to implement a modified Bluetooth stack. By modifying the open source BlueZ files, the Host Controller Interface (HCI) commands sent to the HCI sublayer by upper layer Logical Link Control and Adaptation Protocol (L2CAP) and Synchronous Connection-Oriented (SCO) implementations were hijacked and routed to a UWB “router and convergence” implementation for transmission over the UWB subsytem. Similarly lower level HCI events were spoofed to the L2CAP and SCO layers by the UWB convergence implementation upon receiving packets from the UWB subsystem. The commercial availability of UWB hardware through Wireless USB dongles enabled the realization of a compliant UWB link between the systems, requiring special driver modifications and Intel provided firmware to establish a WiMedia Logical Link Control Protocol (WLP) network. A specially developed test program generates L2CAP, Radio Frequency Communication (RFCOMM) and SCO Bluetooth data for testing the BToUWB link. The various Bluetooth data packets are routed from the Bluetooth stack to a developed kernel space routing module, which encapsulated the packets and route them via the WLP interface over the wireless high-speed UWB network to the remote system. On the remote side, the packets propagate its way back up through the UWB hardware and software module, and to the router module via call-back functions in the WLP interface. The router module strips the headers and injects the packets back into the Bluetooth L2CAP, RFCOMM or SCO layer for further Bluetooth processing. A test program running on the remote system, receives the test data and loops it back for asynchronous analyses, or stores it for later comparison in synchronous analyses. The results obtained from the system analyses shows how a Bluetooth system can benefit from implementing UWB as lower layer wireless interface over a short range by either improved asynchronous bandwidth, or synchronous reliability. The results also show some limitations of the pilot UWB hardware and firmware available over longer distances. In general, the successful transmission of Bluetooth data over the BToUWB implemented system proves the HCI layer to be a viable mergence point between the two protocols. / Dissertation (MEng)--University of Pretoria, 2009. / Electrical, Electronic and Computer Engineering / unrestricted

The thesis focuses on the architecture of embedded systems. It summarizes the current state of accepted standards from IEEE 1451 family, which deals with creating an environment for the sensors and their involvement in various networks. These standards describe the open, network-independent communication architecture for a sensor-based system. One of the main outcomes of this work is the architectures presented as case studies, which can be used as design patters for embedded applications. They are demonstrated on ZigBee technology suitable mainly for small devices with very low power consumption. Based on these studies the new design of universal gateway was proposed. Its major advantage is that it allows interconnection of the endpoints based on different sensor network technologies. Additionally, the thesis deals with modifying the routing protocol of ZigBee network in order to reduce power consumption required to transmit one data packet.

The ever-growing demand for higher quality and faster multimedia content delivery over short distances in home environments drives the quest for higher data rates in wireless personal area networks (WPANs). One of the candidate IEEE 802.15.3a WPAN proposals support data rates up to 480 Mbps by using punctured convolutional codes with quadrature phase shift keying (QPSK) modulation for a multi-band orthogonal frequency-division multiplexing (MB-OFDM) system over ultra wideband (UWB) channels. In the first part of this dissertation, we combine more powerful near-Shannon-limit turbo codes with bandwidth efficient trellis coded modulation, i.e., turbo trellis coded modulation (TTCM), to further improve the data rates up to 1.2 Gbps. A modified iterative decoder for this TTCM coded MB-OFDM system is proposed and its bit error rate performance under various impulsive noises over both Gaussian and UWB channel is extensively investigated, especially in mismatched scenarios. A robust decoder which is immune to noise mismatch is provided based on comparison of impulsive noises in time domain and frequency domain. The accurate estimation of the dynamic noise model could be very difficult or impossible at the receiver, thus a significant performance degradation may occur due to noise mismatch. In the second part of this dissertation, we prove that the minimax decoder in \cite, which instead of minimizing the average bit error probability aims at minimizing the worst bit error probability, is optimal and robust to certain noise model with unknown prior probabilities in two and higher dimensions. Besides turbo codes, another kind of error correcting codes which approach the Shannon capacity is low-density parity-check (LDPC) codes. In the last part of this dissertation, we extend the density evolution method for sum-product decoding using mismatched noises. We will prove that as long as the true noise type and the estimated noise type used in the decoder are both binary-input memoryless output symmetric channels, the output from mismatched log-likelihood ratio (LLR) computation is also symmetric. We will show the Shannon capacity can be evaluated for mismatched LLR computation and it can be reduced if the mismatched LLR computation is not an one-to-one mapping function. We will derive the Shannon capacity, threshold and stable condition of LDPC codes for mismatched BIAWGN and BIL noise types. The results show that the noise variance estimation errors will not affect the Shannon capacity and stable condition, but the errors do reduce the threshold. The mismatch in noise type will only reduce Shannon capacity when LLR computation is based on BIL.

Nowadays data networks occupy an important place in our world. Since the 70, data communications have evolved quickly, and data transmission, voice and video may be transmitted over different media (copper, fiber optic and wireless). For example we can mention video-conference, voice and IP telephony, electronic transactions, medical applications, industrial sensor networks, etc. These applications are carried out successfully through data communications protocols. Protocol is a set of rules and conventions that govern how network devices exchange information. The protocols analysis lets optimize network performance. The study and analysis of wireless personal area networks (WPAN) are developed in this thesis. The application fields include industrial monitoring and control, public safety, measured in vehicles, smart cards or boards, precision agriculture, among others. WPANs are suitable for use in small mobile devices such as sensors, cell phones, Personal Digital Assistants (PDAs), etc. The Institute of Electrical and Electronics Engineers (IEEE) specifies the rules for this type of networks under the IEEE 802.15.x. It have different subgroups:  802.15.1 specifications based on the Special Interest Group (SIG) Bluetooth.  802.15.2 developed a model of coexistence between networks Wireless LAN (Wireless Local Area Networks) and WPANs  803.15.3 transmission delivers high speed, low power consumption, low cost and quality of service.  802.15.4 researches and develops solutions that require low data transmission and thus the batteries lasting for months or even years. This thesis presents the development of proposals to improve the network performance over different real-time scheduling disciplines. First this thesis describes the standard 802.15.3, and then the real-time scheduling algorithms are explained. Then, several variants at MAC level are developed in order improve the real-time WPAN performance. / Las redes de datos hoy en día ocupan un lugar preponderante en mundo en que vivimos. Desde los años 70 los avances sobre las comunicaciones de datos han evolucionado a gran velocidad, pudiendo en la actualidad realizarse transmisiones de datos, voz y video sobre distintos medios (cobre, fibra óptica y sin cable). Como ejemplo podemos mencionar video-conferencias, voz y telefonía sobre IP, transacciones electrónicas bancarias, aplicaciones en medicina, red de sensores industriales, etc. Para que todas estas aplicaciones se lleven a cabo con éxito son indispensables los protocolos que rigen los distintos tipos de comunicaciones. Tal como su definición lo dice un protocolo es un conjunto de normas y convenciones que rigen de qué forma los dispositivos de una red intercambian información. El estudio de éstos permite optimizar el funcionamiento de la red. En esta tesis se desarrolla el estudio y análisis de redes inalámbricas (wireless) de área personal (WPAN). Este tipo de redes se emplean en diversos campos como control y monitoreo industrial, seguridad pública, medición en automóviles, tarjetas o placas inteligentes, agricultura de precisión entre otros. En términos generales, las redes WPANs son adecuadas para el uso en dispositivos móviles pequeños, como sensores, teléfonos celulares, Asistente Digital Personal (PDAs), etc. El Instituto de Ingenieros Electricistas y Electrónicos (IEEE) especifica las normas para este tipo de redes bajo el estándar IEEE 802.15.x, dentro de éste tenemos distintos subgrupos los cuales son:  802.15.1 basado en las especificaciones del Grupo de Interés Especial (SIG) de Bluetooth.  802.15.2 desarrolló un modelo de coexistencia entre las redes Wireless LAN (Redes de Área Local Inalámbricas) y las WPANs  803.15.3 ofrece alta velocidad de transmisión, bajo consumo de energía, bajo costo y calidad de servicio.  802.15.4 investiga y desarrolla soluciones que requieren una baja transmisión de datos y con ello una duración en las baterías de meses e incluso de años. Sobre el estándar 802.15.3 se desarrollarán distintos análisis que nos permitirán realizar propuestas para mejorar el rendimiento de las redes WPANs bajo distintas disciplinas de diagramación sobre sistemas de tiempo real; este es el objetivo de la tesis. Para cumplir con este objetivo, se inicia explicando el funcionamiento del estándar 802.15.3, luego se enfoca sobre los sistemas de tiempo real analizando los distintos algoritmos de diagramación. A continuación se desarrollan diversas metodologías con el objetivo de mejorar el rendimiento de las redes WPANs evaluando su desempeño bajo distintos esquemas de diagramación en tiempo real.

In recent years, an increasing number of devices have been developed for operation in the bands allocated by the Federal Communications Commission (FCC) for license-free operation. Given the rules governing devices in these bands, it is possible for interference created by these devices to significantly reduce the overall capacity of these bands. Two such protocols are Bluetooth and IEEE 802.11b. Several methods have been presented in the literature for managing interference between these two devices. However, these approaches are generally not practical, since they either require the purchase of specialized hardware or do not comply with the current versions of existing protocols. In this dissertation, an approach is presented that is not only backwards-compatible, but requires the algorithm to be implemented in only a small subset of the devices operating in the local environment for the coexistence algorithm to function properly. An analytical solution for this coexistence approach when applied to generic networks is presented. A method is also presented for the backwards-compatible integration of some medium access control (MAC) protocols into Bluetooth devices. A case study of the Bluetooth/IEEE 802.11b coexistence problem is presented in this dissertation, as well as a proposed coexistence mechanism, collision-based multiple access (CBMA). A form of adaptive frequency hopping (AFH) is presented in this dissertation, as well as a combined CBMA/AFH strategy. The CBMA algorithm is shown be able to significantly reduce the impact of a Bluetooth link on an IEEE 802.11b link. The AFH algorithm is shown to have comparable performance to the CBMA algorithm. A combined CBMA/AFH algorithm presented, is shown to not only have an impact on the IEEE 802.11b link that is not greater than the CBMA-only implementation, but the Bluetooth link throughput is shown to be significantly greater than either the CBMA or AFH implementation alone. / Ph. D.

The widespread use of wireless technologies has led to a tremendous development in wireless communication systems. Currently, an individual mobile user may carry multiple personal devices with multiple wireless interfaces, which can interconnect with each other to form a Wireless Personal Area Network (WPAN) which moves with this user. These devices exist in a heterogeneous environment which is composed of various wireless networks with differing coverage and access technologies and also the topology, device conditions and wireless connections in the WPAN may be dynamically changing. Such individual mobile users require ubiquitous communications anytime, anywhere, with any device and wish content to be efficiently and continuously transferred across the various wireless networks both outside and inside WPANs, wherever they move. This thesis presents research carried out into how to implement ubiquitous communications for WPANs in such an environment. Two main issues are considered. The first is how to initiate content transfer and keep it continuous, no matter which wireless network is used as a user moves or how the WPAN changes dynamically. The second is how to implement this transfer in the most efficient way: selecting the most suitable transfer mode for a WPAN according to the user’s and application’s requirements. User-centric (personal-area-centric) and contentcentric mechanisms are proposed in this thesis to address these issues. A scheme based on a Personal Distributed Environment (PDE) concept and designed as a logical user-based management entity is presented. This is based on three mechanisms which are proposed to overcome the technical problems in practical scenarios, which cannot be solved by existing approaches. A novel mechanism is proposed to combine local direct and global mobile communications, in order to implement ubiquitous communications in both infrastructure-less and infrastructurebased networks. This enables an individual user’s ubiquitous communications to be initiated in an infrastructure-less network environment and kept continuous when they move across infrastructure-based networks. Its advantages are evaluated by a performance analysis model and compared to existing solutions and verified by experiments. A cooperation and management scheme is also proposed for dynamic changes of multiple mobile routers and flexible switching of personal device roles in a WPAN while keeping ongoing ubiquitous communications continuous. This adopts a novel view of WPANs which solves the addressing problems caused by changes of mobile routers and makes these transparent to personal devices in the WPAN and external content sources. It provides an efficient method for changing the mobile router of a single WPAN or a WPAN merging with another moving network. Its benefits are demonstrated through performance analysis models. Finally, a novel user-centric and contentcentric mechanism for decision making, to select the most appropriate mobile router in a dynamically changing WPAN environment is proposed. This selects the most suitable content transfer mode for the WPAN to fulfil an individual user’s various requirements. It has different strategies to suit various types of applications. Selection results are demonstrated to verify the proposed mechanism in multiple scenarios of changing user requirements, applications and WPAN conditions.

La bande de fréquences au voisinage de 60GHz (bande 57-64GHz) est en développement rapide pour les systèmes de communication sans fil à courte portée. Cependant, les rayonnements autour de 60GHz sont absents du spectre naturel et les organismes vivants n'y ont encore jamais été exposés dans les conditions environnementales. <br />Ce travail de thèse porte sur l'analyse des effets potentiels des rayonnements millimétriques de faible puissance au niveau cellulaire. Les études sont axées sur deux directions de recherche. Premièrement, nous avons considéré l'influence des ondes millimétriques à 60GHz sur la structure et les propriétés biophysiques des modèles artificiels des membranes biologiques. Deuxièmement, nous avons étudié l'influence du rayonnement millimétrique autour de 60GHz sur les modifications de l'expression génétique des protéines chaperones dans les cellules gliales du cerveau humain.

Στην εν λόγω εργασία, έγινε μια προσπάθεια καταγραφής του τεχνολογικού τοπίου της τηλεπικοινωνιακής αγοράς, με έμφαση την διαλειτουργικότητα μεταξύ των Δικτύων Κινητής Τηλεφωνίας και των Ασύρματων Δικτύων Δεδομένων και των σχετικών αλλαγών που έχει επιφέρει αυτή η διαλειτουργικότητα, τόσο στις παρεχόμενες υπηρεσίες, όσο και στα εφαρμοζόμενα επιχειρηματικά μοντέλα από πλευράς εταιρειών της συγκεκριμένης αγοράς. Στα πλαίσια αυτής της προσπάθειας, χρειάστηκε να πραγματοποιηθεί μια λεπτομερής καταγραφή των τεχνολογικών εξελίξεων, σε επίπεδο τεχνικών προδιαγραφών και προτύπων, στις παραπάνω δύο κατηγορίες δικτύων, ώστε να καταλήξουμε σε εκείνα τα πρότυπα που πλέον μπορούν να οδηγήσουν στην υλοποίηση δικτύων τα οποία θα χαρακτηρίζονται από τα παρακάτω: • θα είναι ενοποιημένα ώστε οι διαφορετικές τεχνολογικές πλατφόρμες των εταιρειών να λειτουργούν απρόσκοπτα, • θα χαρακτηρίζονται από χαμηλό κόστος, • ο τελικός χρήστης θα μπορεί να είναι συνεχώς συνδεδεμένος με κάποιο δίκτυο ασύρματης πρόσβασης και να απολαμβάνει τις υπηρεσίες που επιθυμεί, οποτεδήποτε και οπουδήποτε. Η δομή της διπλωματικής εργασίας ακολουθεί τον προαναφερθέντα τρόπο σκέψης. Στο 1ο Κεφάλαιο γίνεται μια σύντομη παρουσίαση του στόχου σε επίπεδο τεχνολογιών αλλά και υπηρεσιών, δηλαδή των αναμενόμενων αποτελεσμάτων αυτών των δικτύων νέας γενιάς, στα οποία έχουμε συνηθίσει να αναφερόμαστε ως δίκτυα 4G (4th Generation) ή δίκτυα B3G (Beyond 3G) ή τέλος ως All – IP ασύρματα δίκτυα. Στο 2ο Κεφάλαιο, γίνεται μια λεπτομερής παρουσίαση των Δικτύων Κινητής Τηλεφωνίας από τις πρώτες τους εκδοχές (1G) έως τις πλέον σύγχρονες (3.5G) που έχουν εμφανιστεί μέχρι σήμερα. Αναλύονται τόσο οι γενιές των δικτύων όσο και τα χρησιμοποιούμενα πρότυπα, σε επίπεδο αρχιτεκτονικής όσο και σε επίπεδο πρωτοκόλλων. Στη συνέχεια του κεφαλαίου υπάρχει η τεχνική περιγραφή των επικρατέστερων δικτύων κινητής τηλεφωνίας, σήμερα, δηλαδή των GSM, GPRS και UMTS, ενώ στο τέλος του κεφαλαίου υπάρχει μια σύντομη περιγραφή της διαδικασίας intersystem handover μεταξύ των GSM και UMTS. Στο 3ο Κεφάλαιο, περνάμε πλέον στα Ασύρματα Δίκτυα Δεδομένων. Γίνεται μια εκτενής περιγραφή των προτύπων που έχουν καθοριστεί και συγκεκριμένα στα πρότυπα IEEE 802.15 Wireless Personal Area Networks (WPANs) με κυριότερους εκφραστές τα δίκτυα βασιζόμενα σε Bluetooth και IrDA, το πρότυπο IEEE 802.11 Wireless Local Area Networks (WLANs) με σημαντικότερος εκπροσώπους τα WiFi και HyperLan/2, το πρότυπο IEEE 802.16 Wireless Metropolitan Area Networks (WMANs) ή αλλιώς γνωστότερο ως WiMAX και τέλος το πρότυπο IEEE 802.20 Wireless Wide Area Networks (WWANs) ή διαφορετικά Mobile Broadband Wireless Access (MWBA) το οποίο είναι υπό διερεύνηση ακόμα και φιλοδοξεί να αποτελέσει το ασύρματο ανάλογο της τεχνολογίας xDSL, καθώς θα προσφέρει ασύρματες ευρυζωνικές υπηρεσίες. Στο 4ο Κεφάλαιο παρουσιάζονται μεθοδολογίες υλοποίησης του integration μεταξύ δικτύων των δύο κατηγοριών και συγκεκριμένα παραδείγματα διαλειτουργικότητας, όπως μεταξύ GPRS ή UMTS και WLANs ή μεταξύ UMTS και WiMAX. Γίνεται εκτενής συζήτηση γύρω από τα προβλήματα που θα πρέπει να αντιμετωπιστούν, όπως η εξασφάλιση ανεκτού επιπέδου QoS, οι μηχανισμοί για handover μεταξύ των δικτύων, η διαχείριση της κινητικότητας των χρηστών και των τερματικών και δίνονται παραδείγματα δημιουργίας ενοποιημένων δικτύων, τόσο με τη τεχνική της χαλαρής όσο και με την τεχνική της ισχυρής ζεύξης. Στο τελευταίο τμήμα του Κεφαλαίου, γίνεται μια εκτενής αναφορά στις αρχιτεκτονικές διασύνδεσης ετερογενών δικτύων με IP δίκτυα κορμού, τα γνωστά All – IP networks. Ιδιαίτερη έμφαση δίνεται στους μηχανισμούς πραγματοποίησης των handovers βάσει πολιτικών (policy based) και η χρήση τεχνικών για micromobility και macromobility σε σχέση με την κινητικότητα των τερματικών. Το 5ο Κεφάλαιο αφορά τις εφαρμογές και υλοποιήσεις ασυρμάτων δικτύων δεδομένων στον Ελληνικό χώρο, στα πλαίσια του Επιχειρησιακού Προγράμματος «Κοινωνία της Πληροφορίας» και πιο συγκεκριμένα τα «Εξοπλισμός και δικτύωση σε όλες τις βαθμίδες της εκπαίδευσης», «Ασύρματα Ευρυζωνικά Δίκτυα ΟΤΑ»και «Μητροπολιτικά Ευρυζωνικά Δίκτυα Οπτικών Ινών ΟΤΑ» και ουσιαστικά αποτελούν παραδείγματα και υλοποιήσεις διασύνδεσης WiFi, WiMAX και IP backbone δικτύων όπως το ΣΥΖΕΥΞΙΣ με δυνατότητες για παροχή VoIP. / In this thesis, an effort of presenting the technological landscape of the telecommunication market takes place, with focus on the interoperability between the Mobile Telephony Networks and the Wireless Data Networks and the relative changes that have evolved through this interoperability, both regarding the provided services and the applied business models by the enterprises of the specific market. Within the frames of this effort, a detailed recording of technological developments is realised, in terms of technical specifications and standards, in the two aforementioned categories of networks, so as to conclude to those standards that are utilized by the next generation networks (4G) which will be: • Networks that will be unified so as the different technological platforms will function smoothly. • Networks that will be characterized by low cost of deployment. • The end user will be continuously connected with a wireless access network, enjoying the preferred services anywhere and anytime. The master thesis structure follows the aforementioned methodology. The 1st Chapter includes a short presentation of expected results, both in terms of technologies and services for next generation networks, which we usually refer to as 4G networks (4th Generation) or B3G networks (Beyond 3G) or finally as All - IP wireless networks (AIPN). In the 2nd Chapter, a detailed presentation of Mobile Telephony Networks takes place, from their first versions (1G) until the most modern (3.5G) that have been presented up to today. The analysis includes both the various generations of networks and the used standards, in terms of modulation and multiplexing techniques. The rest of the chapter focuses on the technical description of the prevailing networks, GSM, GPRS and UMTS, while the chapter ends with a short description of intersystem handover processes between GSM and UMTS. Τhe 3rd Chapter, includes an extensive description of the Wireless Data Networks standards such as: IEEE 802.15 Wireless Personal Area Networks (WPANs) with main representatives networks based on Bluetooth and IrDA, standard IEEE 802.11 Wireless Local Area Networks (WLANs) mainly represented by WiFi and HyperLan/2, IEEE 802.16 Wireless Metropolitan Area Networks (WMANs) standard, widely known as WiMax and finally the IEEE 802.20 Wireless Wide Area Networks (WWANs) standard, namely Mobile Broadband Wireless Access (MWBA) that is still under development and aspires to constitutes the wireless version of the xDSL technology, since it aims to provide wireless broadband services. In the 4th Chapter methodologies for integrating the two types of networks, are presented along with examples of interoperability between GPRS / UMTS and WLANs or between UMTS and WiMAX. Extensive discussion around the problems that should be faced, as the guarantee of bearable QoS level, the mechanisms for handover between the networks and the management of mobility of users and terminals, is held. Moreover, examples of integrated networks with both loose and tight coupling methodologies are presented. The last section of the chapter concerns a detailed description of architectures for interconnecting heterogeneous wireless networks over IP – based backhaul networks, namely All – IP networks, with special focus on policy based handover mechanisms and techniques for managing micromobility and macromobility issues. The 5th Chapter concerns the changes taking place in the telecommunications market deriving from the technological progress in the subject of heterogeneous wireless networks interconnection. New service packets are created, as a result of new business plans that are drawn up by the big telecommunications organizations. Finally, we present the developments in the Greek market and subsidised projects from Information Society AE, via which wireless networks have been materialised, with aim to promote Broadband Services.