Introdução: A eficácia da litotripsia extracorpórea por ondas de choque (LECO) no tratamento de cálculos em cálice inferior do rim ainda é motivo de controvérsia. Variáveis que possam impactar nos resultados da LECO ainda não estão bem estabelecidos. Objetivo: Avaliar quais variáveis impactam na fragmentação e eliminação de cálculos em cálice inferior do rim após LECO. Material e Métodos: Avaliamos prospectivamente pacientes submetidos à LECO para tratamento de cálculos de cálice inferior de 5 a 20 mm. O índice de massa corpórea (IMC) e a circunferência abdominal foram medidos em cada caso. Um único radiologista, cego aos resultados da LECO, mensurou o tamanho, área e densidade dos cálculos, assim com a distância pele-cálculo, o comprimento, largura e altura infundibular, e o ângulo pielo-calicinal baseado na tomografia computadorizada (TC) realizada antes do procedimento. As taxas de fragmentação, sucesso (cálculos residuais <= 4 mm em pacientes assintomáticos) e eliminação completa foram avaliadas após uma única sessão de LECO, em uma segunda TC, realizada 12 semanas após o procedimento. Análises uni e multivariada foram realizadas. O nível de significância foi estabelecido em p<0,05. Resultados: Cem pacientes foram incluídos no estudo. A idade e IMC médios foram de 47,1 ± 12,5 anos e 28,0 ± 4,7 Kg/m2. O tamanho médio dos cálculos foi de 9,1 ± 3,0 mm. As taxas globais de fragmentação, sucesso e eliminação completa foram de 76%, 54% e 37%, respectivamente. Após a regressão logística múltipla, o IMC (p=0,004) e a densidade (p=0,005) do cálculo impactaram significativamente na fragmentação. O tamanho (p=0,039) e a densidade (p=0,012) do cálculo impactaram significativamente na taxa de sucesso, enquanto o tamanho do cálculo (p=0,029), sua densidade (p=0,046) e o comprimento infundibular (p=0,015) impactaram significativamente na taxa de eliminação completa. As maiores taxas de fragmentação, sucesso e eliminação completa foram encontradas em pacientes com IMC <= 30 Kg/m2, cálculo <=10 mm e <= 900 UH, e comprimento infundibular <= 25 mm. A coexistência das variáveis significantes de mau prognóstico proporcionou uma taxa de eliminação completa <20%. As taxas de doentes livres de cálculos foram menores em pacientes com medidas anatômicas desfavoráveis em relação àqueles com medidas favoráveis, embora a diferença tenha sido significante apenas para o comprimento infundibular (14% vs. 43%, p=0,02). Conclusão: Pacientes com IMC > 30 kg/m2 apresentam uma menor taxa de fragmentação dos cálculos. Tamanho (> 10 mm) e densidade (>900 UH) do cálculo, assim com o comprimento infundibular (>25 mm) influenciam negativamente nos resultados da LECO / Introduction: The efficiency of shock wave lithotripsy (SWL) for treatment of lower pole stone is still controversial. Variables that could impact on SWL outcomes are not well established. Objective: To evaluate which variables impact fragmentation and clearance of lower pole calculi after SWL. Material and Methods: We prospectively evaluated patients undergoing SWL for solitary lower pole kidney stones ranging from 5-20mm. Patient\'s body mass index (BMI) and abdominal waist circumference were recorded. One radiologist, blinded to SWL outcomes, measured stone size, area and density, stone-skin distance, infundibular length, width and height, and infundibulopelvic angle based on baseline noncontrast computed tomography (NCCT). Fragmentation, success (residual fragments <= 4mm in asymptomatic patients) and stone-free rates were evaluated after one single SWL by NCCT 12 weeks post-operatively. Univariate and multivariate analysis were performed. Significance level was set at p < 0.05. Results: One hundred patients were enrolled in this study. Mean age and BMI were 47.1 ± 12.5 years and 28.0 ± 4.7 Kg/m2. Mean stone size was 9.1 ± 3.0 mm. Overall fragmentation, success, and stone-free rates were 76%, 54%, and 37%, respectively. After multiple logistic regression, BMI (p=0.004) and stone density (p=0.005) impacted significantly on fragmentation. Stone size (p=0.039) and stone density (p=0.012) impacted significantly on success rate, whereas stone size (p=0.029), stone density (p=0.046), and infundibular length (p=0.015) impacted significantly on stone-free rate. The higher fragmentation, success and stone-free rates were found for patients with BMI <= 30 Kg/m2, stone <=10 mm and <=900 HU, and infundibular length <= 25 mm. The coexistence of unfavorable variables led to a stone-free rate <20%. Stone-free rates were lower for patients with unfavorable anatomic features compared to those with favorable measurements, although the difference was only significant for infundibular length (14% vs. 43%, p=0.02). Conclusion: Patients with BMI >30 Kg/m2 have a lower stone fragmentation rate. Stone size ( > 10 mm) and stone density (>900 UH), as well as infundibular length ( > 25 mm) impact negatively on SWL outcomes

Os exames de neuroimagem são essenciais na rotina pré-cirúrgica de pacientes com lesão encefálica. A ressonância magnética (RM) e a tomografia computadorizada (TC) são métodos consagrados que fornecem valiosas informações anatômicas das lesões e áreas adjacentes. A ressonância magnética funcional (RMf) é um método mais recente que pode dar suporte a neurocirurgia demonstrando as áreas que apresentam resposta hemodinâmica durante a realização de determinadas tarefas. Por outro lado, o neurocirurgião deve associar estas novas técnicas aos conhecimentos da anatomia empregados no ato cirúrgico. Ribas (2005) estabeleceu um sistema de pontos-chave aplicados à anatomia microcirúrgica, que representam relações entre a superfície do crânio e a superfície do cérebro e demonstra erros menores que 2 cm entre estes pontos e os sulcos e giros cerebrais num estudo em cadáveres. Entretanto, a metodologia não permitiu avaliar a relação com areas cerebrais que mostram atividade hemodinâmica durante a realização de tarefas somatossentivas e motoras. O objetivo desta dissertação foi de avaliar métodos de fusão de imagens geradas por TC, RM e RMf com intuito de verificar as relações craniométricas com os sulcos e giros, e a relação destes pontos com os aspectos funcionais das áreas motora e somatosensitiva. MÉTODOS: Foram realizados exames de RM e RMf com paradigmas motor e somatosensitivo em aparelho de três Tesla (3T) em dez sujeitos que realizaram TC de crânio prévia, (dois com lesão cerebral e oito sem alterações cerebrais visíveis a TC). Escolhemos quatro dos dez pontos-chave estudados por Ribas para avaliação neste trabalho: a intersecção entre os sulcos frontal inferior e pré-central; a intersecção entre os sulcos frontal superior e o précentral; o ponto rolândico superior; e a intersecção entre os sulcos intraparietal e o sulco pós-central devido às suas relações com areas classicamente relacionadas à função motora e somatossensitiva. Os dados de TC, RM e RMf foram analisados por diferentes programas e os resultados comparados. O processo final teve intuito de co-registrar espacialmente as três técnicas e permitir medidas de distâncias em imagens nas três dimensões (3D). RESULTADOS: determinamos um fluxograma de processos computacionais que permitiram mensurar a congruência espacial entre as técnicas de TC, RM, RMF. Não foi encontrada ferramenta computacional que, isoladamente, permitisse todo o conjunto de funcionalidades necessárias para atingir o objetivo. A implementação do processo de fusão das três modalidades mostrou-se viável com a utilização quatro softwares de acesso gratuito (Osirix, Register, Mricro e FSL). Em quatro voluntários foram determinadas as distâncias espaciais entre os pontos-chave na superfície cerebral e na superfície do crânio, a média das quais foi de 2,5cm (±0,6cm) - levando-se em que esta medida inclui as dimensões da tábua ossea e espaços liquóricos, este valor se encontra dentro do que foi demonstrado por Ribas. Porém, a média das distâncias entre pontos na superfície do crânio e pontos de maior resposta na RMf, e entre estes e pontos-chave da superfície do cérebro foi maior, respectivamente de 5,0cm (±1,7cm) e 3,6cm (±2,1cm). Estes achados mostram variabilidade funcional inter-individual, aparentemente maior que a anatômica. Os dados destes estudo mostram que a técnica é viável, e ampliação da casuística pode permitir a análise estatística, necessária para utilização deste método na prática clínica. / Neuroimaging studies have a pivotal role in pre-surgical assessment of patients with brain lesions. Magnetic Resonance Imaging (MRI) and Computerized Tomography (CT) are established techniques providing anatomic information of the lesion and surrounding areas. Functional MRI (fMRI) is a recent method applied to probe brain function via hemodynamic response of brain regions involved in certain tasks, and thus provide useful information to the neurosurgeon. On the other hand, these new techniques have to be added to the knowledge necessary to the neurosurgery act. Ribas (2005) have established a system based on key-points aimed to guide microsurgical interventions. The system consists of anatomical relationships between points in the surfaces of the skull and the cerebrum and is reported to have errors below 2 cm of the intended cerebral sulci and giri in a post-mortem study. Nevertheless, this method does not allow for studying the relationship of the cerebral regions showing hemodynamic response to somatosensory and motor tasks. Our aim was to evaluate image fusion techniques applicable to CT, MRI and fMRI in order to verify the craniometrical relations between skull surface, cerebral surface and areas with maximal hemodynamic response to somatosensory and motor tasks. METHODS: We performed MRI and fMRI studies in ten subjects who had a CT scan performed for other reasons (8 healthy volunteers and 2 patients with localized brain lesions) using somatosensory and motor paradigms in a 3T MRI system. We have selected four out of the ten key points determined by Ribas to perform this analysis: the intersection between the inferior frontal and pre-central sulci; the intersection between the superior frontal and precentral sulci; the superior rolandic point; and the intersection between the intraparietal and post-central sulci. This choice was based on the classical localization of brain regions associated with somatossensory and motor functions. CT, MRI and fMRI data were analysed using different software packages, and the results were compared. The final goal of the process was to spatially co-register the three techniques and distance measurements in three dimensions (3D). RESULTS: we have established a pipeline using different computational processes to measure the spatial anatomic congruency between the key points shown in CT, MRI and fMRI images. We did not find a single software package enabling all the functionalities necessary to accomplish our goals. The implementation of the three imaging modalities fusion process was feasible using four public domain softwares (Osirix, Register, Mricro e FSL). We have determined the distances between the key points in four subjects (e patient). The average distance between the skull surface and brain surface points was 2.5cm (±0.6cm) and taking into account the calvarium thickness and cerebro-spinal fluid dimensions, this value is within what was observed in Ribass study. The average distance between the key points in the skull surface and the fMRI maximum response point, and the average between the brain surface and the fMRI maximum response point was larger, respectively 5.0cm (±1, 7cm) and 3.6cm (±2,1cm). These findings show that the intersubject functional variability is apparently larger then the inter-subject anatomical variability. Our results show that image fusion between CT, MRI and fMRI is possible. We believe that an increased number of subjects and appropriate statistical analysis will help to guide the possible application of this method in clinical routine.

O presente estudo destinou-se a realizar uma análise comparativa entre a osteoartrite de quadris e o posicionamento acetabular através de exames radiográficos e de tomografia computadorizada. Foram incluídos 13 pacientes portadores e oito não-portadores de osteoartrite primária do quadril, recrutados no Ambulatório do Instituto de Ortopedia e Traumatologia do Hospital das Clínicas da Faculdade de Medicina da Universidade de São Paulo. Os exames foram submetidos à medição das seguintes variáveis: ângulos acetabulares, ângulo centro-borda, sinal do entrecruzamento, largura e profundidade do acetábulo no RX; anteversão e ângulos setoriais acetabulares nos tomogramas. Não se verificou diferença estatisticamente significatova na anteversão acetabular entre ambos os grupos, ao passo que o ângulo acetabular setorial posterior mostrou média inferior no grupo afetado / The present study intends to develop a comparative analysis between primary hip osteoarthritis and acetabular positioning through x-ray exams and computed tomographic scans. 13 affected and 8 non-affected patients by degenerative hip disease with no underline causes are recruited within the ambulatory care service of the Institute of Orthopedics and Traumatology of the Hospital of Clinics, São Paulo University Medical School. Their radiographic exams are studied for extracting some parameters named as: acetabular angles, center edge angle, crossover sign, acetabular width and acetabular depth. Tomographic films give information to measure acetabular ante version and acetabular setorial angles. Statistically, there is no significant relationship concerning acetabular ante version within the two groups, although, the posterior acetabular setorial angle shows a lower median value in the osteoarthritic group

A região da articulação temporomandibular (ATM) possui uma limitação na obtenção de imagens pela radiografia convencional. A tomografia computadorizada é o exame mais indicado pela alta especificidade e sensibilidade, para o diagnóstico, planejamento cirúrgico e tratamento das lesões ósseas. O objetivo deste trabalho consiste na avaliação de lesões ósseas simuladas na cabeça da mandíbula pela tomografia computadorizada. Foram utilizadas 15 mandíbulas secas, onde foram criadas lesões esféricas, com o auxílio de brocas esféricas cirúrgicas de uso odontológico com tamanhos variados (nº 1, 3, 6) na cabeça da mandíbula. As lesões foram avaliadas por meio da TC multislice (64 canais), por 2 examinadores independentemente, em 02 ocasiões distintas, utilizando 2 protocolos: axial, coronal, sagital e imagens parassagitais para visualização dos pólos (anterior, lateral, posterior, medial, superior). Posteriormente, as imagens foram comparadas com as lesões presentes na mandíbula seca (Padrão Ouro) avaliando o grau de especificidade e sensibilidade da TC. Estatística de Kappa, teste de validade e teste do Qui-Quadrado foram utilizados como métodos estatísticos. Como resultados observaram a vantagem da associação dos cortes axial, coronal e sagital com cortes parassagitais para detecção de lesões na região de cabeça de mandíbula. Para determinada localização de lesões nos pólos, os tipos de protocolos não apresentaram diferenças significativas em relação as porcentagens de concordância. Os protocolos para visualização da região de cabeça da mandíbula foram estabelecidos no intuito de melhorar a visualização da presença de alterações de cada pólo da cabeça da mandíbula. No que se refere aos pólos avaliados pelos cortes parassagitais houve melhor visualização no pólo anterior e posterior no sentido látero medial. Nos pólos superior, medial e lateral foram mais bem visualizados no sentido ântero-posterior. / There are limitations for image acquisition using conventional radiography of the temporomandibular joint (ATM) region. Computerized tomography (CT) scan is a better option due to its higher specificity and sensitivity for diagnosis, surgical planning and treatment of bone injuries. The purpose of this study is to evaluate simulated bone injuries of the head of the jaw by CT scan. Spherical lesions were created in the head of 15 dry jaws with dentist drills (sizes 1, 3, and 6). Lesions were evaluated using the CT multislice (64 bits) by 2 examiners independently, in 2 different occasions, using 2 protocols: axial, coronal, and sagittal and parasagittal images for head of the mandible visualization (anterior, lateral, posterior, medial, and superior). Images were compared with the dry jaw (gold standard) regarding the presence of injuries, evaluating the degree of specificity and sensitivity of the CT. Kappa statistics, validity tests, and chi-square tests were used as statistical methods. As a result, we observed the advantage of the association of axial, coronal and sagittal slices with parasagittal slices for detection of lesions in the region of mandibles head. For some lesions localized in polar regions, protocols did not show statistically significant differences regarding the proportion of agreement. Protocols for visualization were created to improve the visualization of lesions in each polar region of the jaws head. Regarding parassagittal slices, there was better lateromedial visualization of the anterior and posterior poles and better anteroposterior visualization of superior, medial, and lateral poles.

Orientadores: Nelson Marcio Gomes Caserta, Nelson Adami Andreollo / Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Ciências Médicas / Made available in DSpace on 2018-08-26T00:57:33Z (GMT). No. of bitstreams: 1 Barros_RicardoHoelzdeOliveira_M.pdf: 3905509 bytes, checksum: 23dca8471ab6fab1bb855e172bbb54ac (MD5) Previous issue date: 2014 / Resumo: Objetivo: Avaliar a tomografia computadorizada com múltiplas fileiras de detectores no estadiamento pré-operatório da profundidade de invasão tumoral, acometimento linfonodal e metastático, de acordo com a classificação TNM, em pacientes com adenocarcinoma gástrico. Métodos: 50 pacientes com câncer gástrico foram submetido a estadiamento pré-operatório com tomografia computadorizada de 64 canais de detectores. Dois radiologistas analisaram independentemente as imagens e classificaram os achados. A sensibilidade, especificidade, acurácia e acurácia global para cada avaliador foram calculadas. A concordância inter-observador também foi avaliada. Resultados: A acurácia na classificação das categorias T variou entre 74% e 96% para o observador 1 e entre 80% e 92% para o observador 2. A acurácia global foi de 70% para ambos os observadores. O kappa ponderado foi de 0,75, consistente com uma concordância inter-observador substancial. A acurácia na classificação do acometimento linfonodal (categoria N) variou entre 55% e 79% para o observador 1 e entre 73% e 82% para o observador 2. A avaliação do acometimento metastático evidenciou acurácia global foi de 89,6 % para ambos os observadores. Conclusão: A tomografia computadorizada com 64 canais de detectores evidenciou acurácia clinicamente relevante no estadiamento pré-operatório do adenocarcinoma gástrico / Abstract: Aims: To evaluate the diagnostic performance of multidetector computed tomography (MDCT) with regard to preoperative staging of tumor invasion depth and the presence of lymph node and metastatic involvement according to the TNM classification, in patients with gastric carcinoma. Methodology: Fifty patients with biopsy-confirmed gastric cancer were subjected to pre-surgical staging by 64 channel MDCT. Two radiologists independently analyzed the images and classified the findings. The sensitivity, specificity, accuracy and overall accuracy were calculated for each reviewer. The inter-reviewer agreement was also evaluated. Results: When classifying the T categories, accuracy varied from 74 to 96% for reviewer 1 and from 80 to 92% for reviewer 2. The overall accuracy was 70% for both reviewers. There was substantial inter-reviewer agreement (kappa = 0.75). The accuracy of the lymph node involvement (category N) classification varied from 55¿79% for reviewer 1 and 73¿82% for reviewer 2. The evaluation of metastatic involvement showed an overall accuracy of 89.6% for both reviewers. Conclusion: The 64 channel MDCT showed clinically relevant accuracy in the preoperative staging of gastric carcinoma / Mestrado / Fisiopatologia Cirúrgica / Mestre em Ciências

Electrical trees are micrometre-size tubular channels of degradation in high voltage polymeric insulation, a precursor to failure of electrical power plant. Hence, electrical trees critically affect the reliability of power systems and the performance of new insulation designs. Imaging laboratory-grown electrical trees has been an important tool for studying how trees develop. Commonly, electrical trees prepared in transparent or translucent polymers are imaged using traditional optical methods. Consequently, most of the analysis has been based on two-dimensional (2D) images of trees, thus, valuable information may be lost. However, electrical trees are complex interconnected structures that require a tree-dimensional (3D) approach for more complete analysis. This thesis investigates a method for imaging and analysis of electrical trees to characterise their 3D structure and provide a platform for further modelling. Laboratory created electrical trees were imaged using X-ray Computed Tomography (XCT) and Serial Block-Face Scanning Electron Microscopy (SBFSEM), 3D imaging techniques that provide sub-micrometre spatial resolution. Virtual replicas of the trees, which are the 3D geometrical models representing the real electrical trees, were generated and new indices to characterise the 3D structure of electrical trees were developed. These parameters were indicative of differences in tree growth and thus, they can be used to investigate patterns and classify the structure of electrical trees. The progression of the tree was analysed using cross-sections of the tree that are orthogonal to the growth: the number of tree channels and area covered by them were measured. The fractal dimension of the tree was calculated from the 3D model and from the 2D projections, the latter being lower for all the tree-type structures studied. Parameters from the skeleton of the tree such as number of nodes, segment length, tortuosity and branch angle were measured. Most of the mean segment lengths ranged 6-13 µm, which is in accordance to the 10µm proposed by various tree-growth models. The capabilities of XCT and SBFSEM imaging techniques were evaluated in their application to electrical trees. Bush and branch trees, including early-growth electrical trees (of length 20-40 µm), were analysed and compared using the comprehensive tool of visualisation and characterisation developed. A two-stage tree-growth experiment was conducted to analyse the progression and development of tree branches using XCT: tree channels after the second stage of growth were wider than after the first, while the fractal dimension remained the same. The capabilities of XCT and SBFSEM were tested for imaging electrical trees in optically-opaque materials such as micro and nano-filled epoxy compounds. The general structure of trees in epoxy filled up to 20 wt% micro-silica was observed using both techniques. The use of a virtual replica as the 3D geometrical model for the simulation of the electric field distribution using Finite Element Analysis (FEA) was preliminary explored. A combination of the imaging techniques is proposed for a more complete structural analysis of trees. It is believed that a great impact towards understanding electrical treeing will be achieved using the 3D technical platform developed in this thesis.

京都大学 / 0048 / 新制・課程博士 / 博士(人間健康科学) / 甲第22837号 / 人健博第79号 / 新制||人健||6(附属図書館) / 京都大学大学院医学研究科人間健康科学系専攻 / (主査)教授 岡 昌吾, 教授 藤井 康友, 教授 萩原 正敏 / 学位規則第4条第1項該当 / Doctor of Human Health Sciences / Kyoto University / DGAM

This work deals with processing and analysis of micro-CT images of dental-canals filled by~two materials (AH-plus and NaMPC). For that reason, six dog-teeth were scanned in the X-Ray Micro CT Research Lab. The main aim was to produce an algorithm (in Matlab) that evaluates the quality of filling of dental canals (quality of filling materials). The algorithm performs the segmentation of dental canals and calculates their borders. Also, the algorithm measures the percentage contacts of filling materials with dental walls. Moreover, the algorithm provides masks of dental canals according to requirements of the commercial program VG Studio, that evaluates the porosity of filling materials. The results of percentage contacts and porosities show on not-remarkable differences of tested filling materials.

The morphology of asphalt mixtures plays a vital role in their properties and behaviour. The work in this thesis is aimed at developing a fundamental understanding of the effect of the asphalt morphology on the strength properties and deformation mechanisms for development of morphology-based analysis framework for long-term response prediction. Experimental and computational methods are used to establish the relationship between the mixture morphology and response. Micromechanical modeling is employed to understand the complex interplay between the asphalt mixture constituents resulting in strain localization and stress concentrations which are precursors to damage initiation and accumulation. Based on data from actual asphalt field cores, morphology-based material models which considers the influence of the morphology on the long-term material properties with respect to damage resistance, healing and ageing are developed. The morphology-based material models are implemented in a hot-mix asphalt (HMA) fracture mechanics framework for pavement performance prediction. The framework is able to predict top-down cracking initiation to a reasonable extent considering the variability of the input parameters. A thermodynamic based model for damage and fracture is proposed. The results from the study show that the morphology is an important factor which should be taken into consideration for determining the short- and long-term response of asphalt mixtures. Further understanding of the influence of the morphology will lead to the development of fundamental analytical techniques in design to establish the material properties and response to loads. This will reduce the empiricism associated with pavement design, reduce need for extensive calibration and validation, increase the prediction capability of pavement design tools, and advance pavement design to a new level science and engineering. / Asfaltblandningars morfologi har en avgörande betydelse för deras egenskaper och beteenden. Arbetet i denna avhandling syftar till att utveckla en grundläggande förståelse för effekten av asfaltsmorfologin för deras hållfasthetsegenskaper och deformationsmekanismer och utveckling av ramverksanalysmorfologi baserat på långsiktig förutsägelse. Experimentella beräkningsmetoder används för att fastställa sambandet mellan blandningens morfologi och respons. Mikromekanisk modellering används för att förstå det komplexa samspelet mellan asfaltmassans beståndsdelar som resulterar i spänningslokalisering och spänningskoncentrationer som är föregångare till initiering av skador och ackumulation. Morfologibaserade materialmodeller beaktar påverkan av morfologin på de långsiktiga materialegenskaperna med avseende på skademotstånd, helande samt åldrande, och är utvecklade från data hos verkliga asfaltsfältskärnor. Morfologinbaserade materialmodeller är implementerade i en varmblandad asfalt-( HMA )-brottmekanik-ramverk för förutsägelse av beläggningsprestanda. Ramverket kan i rimlig utsträckning förutspå variationen i ingångsparametrarna ’top-down’ sprickbildningsinitiering. En termodynamiskbaserat ramverk föreslås för skador och brott. Resultaten från studien visar att morfologin är en viktig faktor som bör beaktas för att bestämma respons av asfaltblandningar på kort och lång sikt. Ytterligare förståelse av inverkan av morfologin kommer att leda till utvecklingen av grundläggande analytiska tekniker i design för fastställning av materialegenskaper och belastningars respons. Detta kommer att minska empirism som förknippas med beläggningskonstruktionen, minska behovet av omfattande kalibrering och validering, öka förutsägelseförmågan av designverktyg för beläggningen, samt avancera beläggningsdesign till en ny vetenskaplig nivå och ingenjörskonst. / <p>QC 20150420</p>

Tato práce se zaměřuje na pokročilou zobrazovací technologii, rentgenovou počítačovou tomografii (CT). Tato nedestruktivní technika je využívána pro výzkum různých biomateiálů ve tkáňovém inženýrství a materiálové vědě obecně (skafoldy, polymery, keramické materiály, kompozity aj.). Vizualizace a kvantifikace ve 3D jsou výhodné v rámci multidisciplinárního přístupu, který je často v těchto odvětvích uplatňován. Záměr této práce lze rozdělit do dvou oblastí. Prvním tématem je optimalizace měřicí procedury různých měkkých materiálů pomocí CT s laboratorními rentgenovými zdroji. To zahrnuje převážně zobrazování ve fázovém kontrastu, konkrétně metodu volného šíření záření (VŠZ). Tato práce teoreticky popisuje VŠZ a demonstruje tento jev na řadě experimentů. Následné nezbytné zpracování dat získaných VŠZ je implementováno a vyhodnoceno na základě míry zlepšení obrazových dat. Druhé téma ukazuje konkrétní aplikace CT v materiálovém inženýrství. Několik studií s různými CT zařízeními ukazuje příklady možných aplikací a obrazového zpracování. Příklady korelace CT dat s jinými doplňkovými technikami ukazují, jak může být CT aplikována v multioborovém přístupu ke komplexnímu řešení vědeckých problémů.