Facilement excitable au moyen de diode InGaAs, l’ion Ytterbium trivalent présenteune émission infrarouge intéressante pour des applications laser. Les matériaux étudiés sontnombreux. Parmi eux, les borates sont des composés stables, transparents dans l’UV et présentant un seuil élevé au dommage. Ils sont par conséquent des bons candidats pour desapplications optiques. D’un point de vue structural, ils présentent une diversité de sitesd’accueil pour la terre rare ce qui permet de moduler les émissions obtenues en fonction de lacomposition.Nous avons mené une étude d’élaboration et de caractérisation sur un borate (à fusioncongruente) et deux oxyborates (à fusion non congruente) de composition : Li6Ln(BO3)3 ;LiGd6O5(BO3)3 ; Na3La9O3(BO3)8.Les différentes croissances cristallines, par la méthode Czochralski ou par la méthodedu flux, nous ont permis d’obtenir des cristaux de taille centimétrique comportant de largeszones transparentes, utiles pour les tests en cavité laser. L’étude spectroscopique de l’ionytterbium nous a permis d’évaluer l’éclatement des niveaux d’énergie et de localiser les ionsterres rares dans ces matrices. Différentes caractérisations thermiques, mécaniques et optiquesont aussi été réalisées sur les cristaux afin de pouvoir estimer les paramètres laser.Finalement, de premiers tests lasers ont été réalisés et ont montré la potentialité de cesmatériaux en tant que matériaux amplificateurs. / By the mean of InGaAs diode, trivalent ytterbium ions can give rise to an interestinginfrared emission for laser applications. Numerous compounds are in study. Among them,borates are stable, UV-transparent compounds and they have a high damage threshold. Thusthey are good candidates for optical applications. From a structural point of view, they exhibita diversity of host sites for the rare earth which allows to modulate emission withcomposition.We carry out an elaboration and characterization study on a borate and two oxyboratecompounds of formula Li6Ln(BO3)3 ; LiGd6O5(BO3)3 ; Na3La9O3(BO3)8.Crystal growth, by Czochralski or flux method depending on the meltingcharacteristic, enable us to obtain centimetric sized crystals with large transparent areas.Ytterbium ion spectroscopy study enables us to estimate energy levels splitting and to locaterare earth ions in these matrices. Several thermal, mechanical and optical characterizations were also performed on the crystals to estimate laser parameters. Finally, first laser tests werecarried out and have shown the potentiality of these materials as amplifier media.

Cette thèse traite des dégradations induites par la pompe (photo-noircissement) et les radiations ionisantes externes (radio-noircissement) dans les fibres optiques en silice dopées ytterbium (FDY) utilisées en environnement sévère. Au travers de caractérisations expérimentales et de modélisations inédites, elle analyse leur interaction et en tire les conséquences quant à la tenue des FDY aux radiations sous pompe. La première partie porte sur l’identification des défauts induits (centres colorés) et leurs mécanismes de formation/guérison. Elle s’appuie sur un ensemble de caractérisations post-irradiation (RPE, ARI, TL) réalisées sur des échantillons de préformes et sur leur corrélation originale (guérison thermique, couplage TL et ARI). L’étude systématique en fonction de la composition met en évidence l’influence des co-dopants (Al, Ce) sur la capture des charges libérées lors des processus d’ionisation. La seconde partie analyse le noircissement se développant sous l’effet simultané de la pompe et de l’irradiation ionisante. A partir d’un banc de mesures autorisant le suivi de la dégradation en temps réel, on montre que photo- et radio-noircissements résultent des mêmes centres colorés blanchis par la pompe. Ce résultat, ajouté aux mécanismes préalablement identifiés, permet de proposer un modèle physique local de la dégradation photo-radio-induite. La confrontation des simulations issues de ce modèle à une large variété d’observations originales faites « en ligne » conduit à sa validation. Il est ainsi démontré que, pour des débits de dose inférieurs à une valeur critique, la dégradation des FDY pompées et irradiées ne peut excéder leur niveau de photo-noircissement. / This thesis deals with the degradation induced by the pump (photodarkening, PN) and ionizing radiations (radiodarkening, RN) in ytterbium-doped optical fiber (YDF) used in harsh environments. Through original experimental characterizations and modeling, it analyses the interplay between PN and RN and reveals important and novel properties of the radiation resistance of pumped YDF. The first part investigates induced defects (color centers) together with their creation/recovery mechanisms. It used a set of post-irradiation characterizations (ESR, RIA, TSL) conducted on preform samples and benefited from their original correlation (thermal recovery protocols coupling TSL and RIA). A systematic study as a function of composition reveals the influence of co-dopants (Al, Ce) on the trapping of carrier freed during ionization processes. The second part examines the darkening build-up under the simultaneous action of the pump and an ionizing irradiation. By using a measurement bench that allowed us to follow the real-time “on line” degradation of fiber samples, we showed that photo- and radio-darkening both arise from the same color centers that can be bleached by the pump. On the basis of this finding and of the preceding identified mechanisms, we propose a local physical model of the photo-radio-induced darkening. The latter is thoroughly validated by further successful comparisons of simulated degradation with a wide variety of “on line” original observations. Then, we notably demonstrate that for dose rates lying below a critical value (explicited by our theory), the degradation of pumped and irradiated YDF never exceeds the photo-darkening level.

Les propriétés exacerbées des atomes de Rydberg ont permis d'étendre les possibilités offertes par les atomes froids dans la création de gaz d'atomes en très forte interaction, avec des applications notamment en simulations quantiques, dans la physique à N corps ou dans la réalisation de portes quantiques grâce au phénomène de blocage dipolaire. L'utilisation des atomes de Rydberg froids est cependant actuellement limitée par le fait qu'il n'est pas possible de continuer d'appliquer les techniques expérimentales de manipulation optique avec les atomes à un électron actif. L’attention de la communauté des atomes de Rydberg froids s’est donc récemment portée sur les atomes à deux électrons actifs qui offrent la possibilités, une fois l’un des deux électrons excité vers un état de Rydberg, de disposer d’un second électron optiquement actif qu’il va être possible de manipuler par laser. L’objectif de cette thèse est d’étendre les techniques de manipulation optique aux atomes à deux électrons actifs excités dans des états de Rydberg, dans le cas de l’atome d’ytterbium. Elle présente d’une part la conception et l’assemblage du dispositif expérimental permettant l’obtention d’une source d’atomes de Rydberg froids d’ytterbium. A terme, ce montage permettra la manipulation optique de ces atomes de Rydberg. D’autre part, elle présente le développement d’un modèle numérique implémentant la théorie du défaut quantique à plusieurs voies pour permettre la détermination théorique du spectre énergétique de l’ytterbium ainsi que son comportement sous l’effet de perturbations extérieures. / The exacerbated properties of Rydberg atoms have extended the possibilities offered by cold atoms in creating atomic gases in very strong interaction with applications including quantum simulations in many-body physics or in achieving of quantum gates with the dipole blocking phenomenon. The use of cold Rydberg atoms is however currently limited by the fact that it is not possible to continue to apply the experimental techniques of optical manipulation with the atoms to an active electron. The attention of the Rydberg atoms cold community is recently focused on the two active electron atoms offering possibilities, once one of the two electrons excited to a Rydberg state, to provide a second optically active electron that it will be possible to manipulate with laser light.The objective of this thesis is to extend the optical manipulation techniques to atoms with two active electrons excited in Rydberg states, in the case of the ytterbium atom. It has on the one hand the design and assembly of the experimental apparatus for obtaining a source of cold Rydberg ytterbium atoms. Ultimately, this device will allow the optical manipulation of these Rydberg atoms. Furthermore, it presents the development of a numerical model that implements the multichannel quantum defect theory to the theoretical determination of the energy spectrum of ytterbium and its behavior under the influence of external perturbations.

Le développement de sources laser générant des impulsions femtoseconde à très haut taux de répétition est l'un des axes de recherche les plus porteur de ces 10 dernières années, et ouvre la voie pour de nombreuses applications industrielles et scientifiques. Les lasers à fibres permettent d'obtenir des sources de forte puissance moyenne, mais le fort confinement de la lumière générant de fortes non-linéarités, limite l'énergie des impulsions de sortie. Les amplificateurs à cristaux quant à eux, ne permettent généralement pas d'obtenir des impulsions aussi courtes que dans les lasers à fibres principalement à cause des propriétés spectroscopiques des cristaux, mais cependant ils permettent d'obtenir des énergies bien plus élevées. La post-compression par effets non-linéaires est une des solutions permettant de réduire la durée de ces impulsions. Cependant, les non-linéarités sont généralement préjudiciables, et limitent les performances des lasers (principalement en terme de qualité temporelle des impulsions). Une technique mise en oeuvre pour contrôler et exploiter positivement ces non-linéarités afin d'obtenir des impulsions courtes et de bonne qualité, tout en atteignant des énergies élevées dans les amplificateurs régénératifs à cristaux, est présentée dans cette thèse.L'application d'un étirement négatif à l'impulsion avant amplification, permet de compenser dans certaines conditions, la dispersion positive des composants de l'amplificateur ainsi que la phase non-linéaire accumulée durant l'amplification . Nous avons donc étudié théoriquement et expérimentalement les différents régimes d'amplification non-linéaire, afin de trouver les paramètres optimaux. Ceci à permis de démontrer des impulsions ultracourtes et d'excellentes qualités temporelles même avec de fortes intégrales B. En considérant le couplage de la dispersion et des effets non-linéaires, ainsi que la bande de gain des milieux à gain, nous avons pu générer des impulsions sub-100 fs pour des puissances crêtes de plusieurs centaines de MW. Ces résultats obtenus dans des amplificateurs à très fort gain (50 dB) nous ont permis d'établir de nouveaux records de durées pour ce type d'architectures.Une autre étude sur la montée en puissance a permis de dimensionner une nouvelle gamme d'amplificateurs à cristaux, exploitant la géométrie pavé (usuellement appelée "slab") pour optimiser l'évacuation thermique. Une source de plus de 60 W a été réalisée, démontrant le potentiel de montée en puissance de ce type d'amplificateurs. Nous avons également mis en évidence les limites de cette architecture, en montrant des dégradations spatiales liées aux effets thermiques, problèmes majeurs lors de la montée en puissance.5 articles ont été rédigés grâce à ces résultats théoriques et expérimentaux. Ces travaux ont été présentés dans dix conférences. Enfin, ils ont permis à la société Amplitude Systèmes de procéder à la mise sur le marché de deux nouvelles gammes de produits : un laser compact et intégré et le TANGOR 100 W. / The development of laser sources delivering femtosecond pulses at high repetition rate is one of the main axe of reaserch of these 10 past years and is a key for many industrial and scientific applications. In one hand, fiber lasers allow to reach high average power sources, but the strong confinment of the light leads to high nonlinearities limiting output pulse energy. In the other hand, bulk amplifiers cannot provide as short pulse duration as fiber lasers because of crystals spectroscopic properties. However they can reach higher energy. Usually nonlinear effects are deletarious and limit output temporal pulse quality. A technic to tailor and exploid positively these nonlinearities in order to obtain shorter pulses together with high pulse energy in bulk regenerative amplifier is presented in this thesis.Negative dispersion managment prior amplification permits to precompensate the amplifier positive dispersion together with the accumulated nonlinear phase aquired during amplification. In order to deliver ultrashort pulses with an excellent temporal quality theoritical studies have been carried out to optimise the paramaters. By considering dispersion, nonlinearities and limited gain bandwidth, we could demonstrated sub-100 fs pulses with a peak power of hundreds of MW. These results established new pulse duration record in high gain (50 dB) bulk amplifiers.Another study allowed to design new amplifier geometries for power scaling. This has been done by using slab crystal geometry to improved heat dissipation. More than 60W average power has been demonstrated, highlighting the potential of such architecture for high power lasers. We also studied limitations of such design, especially thermal degradation effects, which are one of the main issues of high power bulk amplifier.5 articles have been written thanks to these theoritical and experimental results and have been presented in 10 conferences. As industrial results Amplitude Systemes has lunched into market two new lines of products: a compact and all integrated laser and a TANGOR 100 W.

Les lasers à impulsions ultra-courtes (< 10 ps) ont largement démontré leur intérêt pour de nombreuses applications scientifiques, industrielles ou encore médicales. Le domaine du micro-usinage par impulsions laser est l'un des domaines les plus actifs du moment. Les dernières avancées en la matière privilégient deux axes de recherche, l'augmentation du taux de répétition associé à de fortes puissances moyennes et une montée en énergie. Nos travaux s'inscrivent dans ce contexte et visent à développer des amplificateurs d'impulsions ultracourtes innovants à base de fibres cristallines Yb:YAG délivrant de fortes puissances moyennes et de fortes énergies en régime de polarisation cylindrique. Les sources développées sont destinées à être intégrées au sein de systèmes de micro-usinage laser aux performances inédites développés dans le cadre du projet européen Razipol. Celles-ci joueront le rôle de préamplificateur fort gain au sein d'une architecture MOPA composé d'un oscillateur ultra-rapide à base de cristal d'Yb:KYW et d'un amplificateur final à base de disque mince Yb:YAG. Pour répondre à la problématique des dégradations spatiales liées à la montée en puissance moyenne dans les architectures à laser solide pompé par diode, une architecture en cascade composée de trois étages d'amplification permettant de réduire la charge thermique a d'abord été réalisée. Grâce à une fine optimisation de l’ensemble des paramètres spectroscopiques (taux de dopage des cristaux, longueur d'onde de pompe...) et géométriques (longueur des cristaux, tailles de faisceaux...) a permis d'amplifier des impulsions femtosecondes (750 fs) jusqu'à des puissances moyennes de 100 et 85 W, respectivement obtenues en polarisation linéaire et cylindrique, à la cadence de 20 MHz. Un amplificateur picoseconde de forte énergie à également été réalisé. Intégrant un dispositif de combinaison cohérente à division temporelle à 4 ou 8 répliques visant à réduire les effets non-linéaires, la source développée délivre des énergies remarquablement élevées pour ce type de système à amplification directe. Il délivre des énergies de 1 et 2 mJ à des cadences inférieures à 20 kHz. Ces résultats ont fait l'objet de 2 publications dans des revues internationales à comité de lecture. Par ailleurs les deux amplificateurs développés ont été intégrés sous la forme de systèmes compactes et robustes, utilisables par les membres du projet européen Razipol. Ces travaux ont également inspirée une nouvelle ligne de produits désormais commercialisés la société Fibercryst. / In the last decade ultra-short pulse laser (< 10 ps) have sparked increasing interest for many industrial and scientific applications. Among the geometries used so far for high-power Yb-doped diode-pumped solid-state lasers as slabs, rods and thin disks, the single crystal fiber (SCF) technology was recently shown to have a high potential for the amplification of ultrashort pulses thanks to a very efficient thermal management and high optical efficiencies. This technology combined with the cubic crystal structure of Yb:YAG offers a cylindrical symmetry of the optical and thermo-mechanical properties. Yb:YAG SCFs are therefore well suited for the amplification of cylindrically polarized beams. In the context of a European Project called RAZIPOL, we have developed new laser amplifier architectures using SCF to directly amplify femtosecond pulses to achieve high energy and high average power pulses with radial and azimuthal polarizations without any stretching and recompression of the pulses.We first demonstrate a three-stage diode-pumped Yb:YAG single-crystal-fiber amplifier to generate femtosecond pulses at high average powers with linear or cylindrical (i.e., radial or azimuthal) polarization. At a repetition rate of 20 MHz, 750 fs pulses were obtained at an average power of 85 W in cylindrical polarization and at 100 W in linear polarization. Investigations on the use of Yb:YAG single-crystal fibers with different length/doping ratios and the zero-phonon pumping at a wavelength of 969 nm were conducted in order to optimize the performances of the amplifiers.The second part of the project is focused on pulse energy scaling. In this sense, we demonstrate a two-stage Yb:YAG single-crystal-fiber amplifier designed for high peak power to significantly increase the pulse energy of a low power picosecond laser. The first amplifier stage has been designed for high gain. Using a gain medium optimized in terms of doping concentration and length an optical gain of 32dB has been demonstrated. The second amplifier stage designed for high energy using divided pulse technique allows to generate recombined output pulse energy of 2mJ at 12.5 kHz with a pulse duration of 6 ps corresponding to a peak power 320MW. Average powers ranging from 25W to 55W with repetition rates varying from 12.5 kHz to 500 kHz have been demonstrated.This results has led to the publication of 2 articles in international peer-reviewed journals and have been presented in 7 conferences. Finally this work has inspired the launch of a new line of industrial products by Fibercryst.

Ultralow threshold, compact and highly efficient femtosecond lasers based on Yb³⁺ -doped potassium yttrium tungstate (Yb:KYW) and Yb³⁺ -doped vanadium yttrium oxide (Yb:YVO 4 ) have been demonstrated within this PhD-research project. For a continuous wave unmode-locked Yb:KYW laser a threshold as low as 101 mW was obtained with a slope efficiency of 74 %. By employing a single prism for dispersion control, the laser was tunable between 1012 nm to 1069 nm. When operated in the mode-locked regime, this laser produced transform-limited pulses having durations of 210 fs at a central wavelength of 1044 nm. Stable mode locking was observed for an optimised incident pulse fluence on the SESAM between 140 μJ/cm² to 160 μJ/cm² which was 2-3 times higher than the designed energy pulse fluence of the SESAM (70 μJ/cm² ). The employment of several combinations of chirped mirror designs for control of intracavity group velocity dispersion led to excellent results. The threshold for mode locking was satisfied for a pump power of 255 mW where the slope efficiency was measured to be 62 %. This is the most efficient SESAM-assisted femtosecond laser yet reported and the highest optical-to-optical efficiency of 37 % is exceptional. Transform- limited pulses with durations as short as 90 fs were produced in a spectral region centred on 1052 nm. The success of this research thus represents a good foundation on which to design and build more compact configurations that will incorporate just one chirped mirror for dispersion compensation. A relatively high nonlinear refractive index, n₂ , of 15 x 10⁻¹⁶ cm² /W was measured in Yb:YVO 4 and this affords particular potential for this candidate material in Kerr-lens mode locking. In fact, for operation in the femtosecond domain, the threshold power was 190 mW with a slope efficiency of 26 % and near-transform-limited pulses as short as 61 fs were generated at a centre wavelength of 1050 nm. The main objectives in developing this type of laser relate to a demonstration of high peak power operation in thin disc laser configurations. The deployment of a diode-pumped Yb:KYW femtosecond laser as a pump source for frequency doubling in a periodically-poled LiTaO₃ crystal was realised. The maximum realized output power of 150 mW corresponded to an impressive second harmonic conversion efficiency of 43 %. 225-fs duration green pulses (centred at 525 nm) were generated under the condition of strong focusing in the nonlinear crystal.

This thesis focuses on research I have done on ytterbium-doped femtosecond fiber lasers. These lasers operate in the near infrared region, lasing at 1030 nm. This wavelength is particularly important in biomedical applications, which includes but is not limited to confocal microscopy and ablation for surgical incisions. Furthermore, fiber lasers are advantageous compared to solid state lasers in terms of their cost, form factor, and ease of use. Solid state lasers still dominate the market due to their comparatively high energy pulses. High energy pulse generation in fiber lasers is hindered by either optical wave breaking or by multipulsing. One of the main challenges for fiber lasers is to overcome these limitations to achieve high energy pulses. The motivation for the work done in this thesis is increasing the output pulse peak power and energy. The main idea of the work is that decreasing the nonlinearity that acts on the pulse inside the cavity will prevent optical wave breaking, and thus will generate higher energy pulses. By increasing the output energy, ytterbium-doped femtosecond fiber lasers can be competitive with solid state lasers which are used commonly in research. Although fiber lasers tend to lack the wavelength tuning ability of solid state lasers, many biomedical applications take advantage of the 1030 µm central wavelength of ytterbium-doped fiber lasers, so the major limiting factor of fiber lasers in this field is simply the output power. By increasing the output energy without resorting to external amplification, the cavity is optimized and cost can remain low and economical. During verification of the main idea, the cavity was examined for possible back-reflections and for components with narrow spectral bandwidths which may have contributed to the presence of multipulsing. Distinct cases of multipulsing, bound pulse and harmonic mode-locking, were observed and recorded as they may be of more interest in the future. The third-order dispersion contribution from the diffraction gratings inside the laser cavity was studied, as it was also considered to be an energy-limiting factor. No significant effect was found as a result of third-order dispersion; however, a region of operation was observed where two different pulse regimes were found at the same values of net cavity group velocity dispersion. Results verify the main idea and indicate that a long length of low-doped gain fiber is preferable to a shorter, more highly doped one. The low-doped fiber in an otherwise equivalent cavity allows the nonlinear phase shift to grow at a slower rate, which results in the pulse achieving a higher peak power before reaching the nonlinear phase shift threshold at which optical wave breaking occurs. For a range of net cavity group velocity dispersion values, the final result is that the low doped fiber generates pulses of approximately twice the value of energy of the highly-doped gain fiber. Two techniques of mode-locking cavities were investigated to achieve this result. The first cavity used NPE mode-locking which masked the results, and the second used a SESAM for mode-locking which gave clear results supporting the hypothesis.

Yb3+-Lasermedien glänzen mit hoher Effizienz und relativ geringer thermischer Last, besonders in Laseroszillatoren und -verstärkern mittlerer bis hoher Leistung. Modenkopplung von Yb3+-Lasersystemen ermöglicht Subpikosekunden-Pulse bei hoher mittlerer Ausgangsleistung. Diese Arbeit widmet sich zwei Gruppen der vielversprechendsten neuen Yb3+-aktivierten Laserkristalle: den strukturell analogen, monoklinen Doppelwolframaten Yb:KGd(WO4)2 (Yb:KGW), Yb:KY(WO4)2 (Yb:KYW) und KYb(WO4)2 (KYbW) und den Yb3+-dotierten Sesquioxiden, vertreten durch Yb:Sc2O3 (Yb:Skandia). Die spektroskopischen Daten von KYbW, darunter eine extrem kurze 1/e-Absorptionslänge von 13 Mikrometern bei 981 nm, wurden im Rahmen der Dissertation vermessen. Die Lasereigenschaften niedrig Yb3+-dotierter Wolframate im Dauerstrich (cw)- und modengekoppelten Betrieb wurden in Lasern moderater Ausgangsleistung untersucht. Ultrakurzpuls-Erzeugung mit Yb:KYW, Yb:KGW und Yb:Glas wurde in einem passiv modengekoppelten Laser verglichen. Dabei wurde eine relativ hohe Lasereffizienz erreicht, Dank einer Trapezlaserdiode als Pumpquelle mit exzellenter Strahlqualität. Quasi-cw- und cw-Laserbetrieb von Yb3+ in hochdotierten und stöchiometrischen Wolframatkristallen wurden untersucht. Diese Materialien sind interessant für Mikrochip- und Scheibenlaser. Wichtige Fragestellungen waren die Kristallqualität und die Hitzeentwicklung bei hohen Yb3+-Konzentrationen. Erstmals wurde Lasertätigkeit von Wolframaten mit Yb3+-Konzentrationen >>20% und schließlich, mit KYbW, cw-Laserbetrieb eines stöchiometrischen Yb-Lasermaterials demonstriert. Weiterhin wurde mit KYbW der kleinste bisher für einen Laserkristall gemessene Laserquantendefekt erzielt, 1,6%. Unter Benutzung eines Yb:Sc2O3-Lasermediums wurde erstmals modengekoppelter Betrieb eines Oszillators mit Sequioxid-Laserkristall gezeigt. Betrieb mit nichtsolitonen- und solitonenartiger Pulsformung sowie mit Ti:Saphir-Laser oder Trapezlaserdiode als Pumplaser wurden untersucht. Mit einem Ti:Saphir-gepumpten Yb:Skandia-Laser wurde eine Konversionseffizienz von 47 % bezogen auf die absorbierte Pumpleistung erreicht, der bisher höchste Wert für einen modengekoppelten Yb3+-basierten Laser. / Yb3+ laser media excel with high efficiency and relatively low heat load, especially in medium to high power laser oscillators and amplifiers. Mode-locking of Yb3+ laser systems can provide subpicosecond pulse durations at high average power. This work deals with two groups of the most promising novel Yb3+-activated laser crystals: Yb3+-activated monoclinic double tungstates, namely the isostructural crystals Yb:KGd(WO4)2 (Yb:KGW), Yb:KY(WO4)2 (Yb:KYW), and KYb(WO4)2 (KYbW), and Yb3+-doped sesquioxides, represented by Yb:Sc2O3 (Yb:scandia). Spectroscopic data of KYbW were investigated as part of this thesis, finding an extremely short 1/e-absorption length of 13 micrometers at 981 nm. Continuous-wave (cw) and mode-locked laser performance of moderate-average-power lasers based on lowly Yb3+-doped tungstates were examined. Ultrashort pulse generation with Yb:KYW, Yb:KGW, and Yb:glass was compared in a passively mode-locked laser. A relatively high mode-locked laser efficiency was achieved due to a tapered diode pump laser with excellent beam quality. Quasi-cw and cw lasing of Yb3+ in highly doped and stoichiometric tungstate crystals were investigated. These materials are interesting for microchip and thin-disk lasers. Important issues were crystal quality and heat generation at high Yb3+ concentrations. For the first time, laser operation of tungstates with a Yb3+ concentration >>20% and finally, with KYbW, cw lasing of a stoichiometric Yb laser material was achieved. Furthermore, with KYbW, the smallest laser quantum defect ever for a laser crystal was demonstrated, 1.6%. Using a Yb:Sc2O3 laser medium, for the first time mode locking of an oscillator using a sesquioxide laser crystal was realized. Laser regimes with non-solitonlike and solitonlike pulse shaping were investigated, using a Ti:Sapphire laser and a tapered laser diode as pump sources. With a Ti:Sapphire-laser-pumped Yb:scandia laser the highest conversion efficiency with respect to absorbed pump power for any mode-locked Yb3+-based laser was achieved, 47%.

Thesis (Ph. D.)--Ohio State University, 2006. / Title from first page of PDF file. Includes bibliographical references (p. 194-202).

This thesis focuses on research I have done on ytterbium-doped femtosecond fiber lasers. These lasers operate in the near infrared region, lasing at 1030 nm. This wavelength is particularly important in biomedical applications, which includes but is not limited to confocal microscopy and ablation for surgical incisions. Furthermore, fiber lasers are advantageous compared to solid state lasers in terms of their cost, form factor, and ease of use. Solid state lasers still dominate the market due to their comparatively high energy pulses. High energy pulse generation in fiber lasers is hindered by either optical wave breaking or by multipulsing. One of the main challenges for fiber lasers is to overcome these limitations to achieve high energy pulses. The motivation for the work done in this thesis is increasing the output pulse peak power and energy. The main idea of the work is that decreasing the nonlinearity that acts on the pulse inside the cavity will prevent optical wave breaking, and thus will generate higher energy pulses. By increasing the output energy, ytterbium-doped femtosecond fiber lasers can be competitive with solid state lasers which are used commonly in research. Although fiber lasers tend to lack the wavelength tuning ability of solid state lasers, many biomedical applications take advantage of the 1030 µm central wavelength of ytterbium-doped fiber lasers, so the major limiting factor of fiber lasers in this field is simply the output power. By increasing the output energy without resorting to external amplification, the cavity is optimized and cost can remain low and economical. During verification of the main idea, the cavity was examined for possible back-reflections and for components with narrow spectral bandwidths which may have contributed to the presence of multipulsing. Distinct cases of multipulsing, bound pulse and harmonic mode-locking, were observed and recorded as they may be of more interest in the future. The third-order dispersion contribution from the diffraction gratings inside the laser cavity was studied, as it was also considered to be an energy-limiting factor. No significant effect was found as a result of third-order dispersion; however, a region of operation was observed where two different pulse regimes were found at the same values of net cavity group velocity dispersion. Results verify the main idea and indicate that a long length of low-doped gain fiber is preferable to a shorter, more highly doped one. The low-doped fiber in an otherwise equivalent cavity allows the nonlinear phase shift to grow at a slower rate, which results in the pulse achieving a higher peak power before reaching the nonlinear phase shift threshold at which optical wave breaking occurs. For a range of net cavity group velocity dispersion values, the final result is that the low doped fiber generates pulses of approximately twice the value of energy of the highly-doped gain fiber. Two techniques of mode-locking cavities were investigated to achieve this result. The first cavity used NPE mode-locking which masked the results, and the second used a SESAM for mode-locking which gave clear results supporting the hypothesis.