1 |
SAR Reduction on a Portable Device Using Intelligent MetamaterialWang, Yi-jen 28 July 2010 (has links)
In this thesis, intelligent metamaterial was designed to reduce the peak specific absorption rate (SAR) value. Intelligent metamaterial means that when the antenna is far away from a human head, the metamaterial behaves like air and it does not affect the antenna performance; when the antenna is close to a human head, however, the metamaterial acts like a single negative (SNG) material.
We designed two kinds of intelligent metamaterial structures. One makes use of impedance mismatching, and the other makes use of the frequency band shift property to reduce the peak SAR value at the operating frequency. The former structure is broadband, and it can reduce the peak SAR value by 56.7%. The latter structure has a much smaller size compared to the former one, and it is suitable for cellular phone applications. The peak SAR value can be reduced by 40% using the latter structure. The proposed two kinds of the intelligent metamaterial structures do not affect the antenna performance.
Finally, the intelligent metamaterial has been applied to a cellular phone. The dimension of the intelligent metamaterial is only 40 mm ¡Ñ 20 mm ¡Ñ 0.8 mm. The intelligent metamaterial does not affect the antenna performance when the antenna is far away from a human head. When the antenna is close to a human head, the peak SAR is reduced by 41.7%.
|
2 |
Effect of metallic accessories on the human head to the SAR distribution due to mobile phones.Li, Tzung-han 13 December 2010 (has links)
In recent years, the rapid development of wireless communications has resulted in much better quality of life due to easiness and multitudes in communications. The most representative products are the mobile phones. The product is so popular that in developed countries nearly everyone owns a mobile phone; that applies not only to adults, but also young students. In view of this wide spreading phenomenon, the mobile phone industry has inescapable health related responsibilities for its users, especially for the younger ones. While enjoying the great convenience of the product, the users are advised to understand the possible health related effects caused by electromagnetic radiation. One of the very important considerations is Specific Absorption Rate (SAR), in which absorption of electromagnetic energy by a medium (for example, a human head) is measured. Before a mobile phone is brought into the market, it is important to understand how the SAR values can be affected by the metallic accessories around the human head.
This thesis uses software package, SEMCAD, to analyze the metallic accessories on the human head which might influence the SAR value. We would discuss in this thesis three object, eyeglasses, earrings and rings which could affect the maximum SAR value in the human head. For eyeglasses and earring, we would suggest why these metallic accessories at different position could cause different SAR value to suggest people which gesture should be avoided while using the cell phone. For ring, this thesis would use the shape of the ring and place it at special position to decrease the maximum SAR value in the human head to reduce the possible harm from the electromagnetic radiation of mobile phone and ensure the safety while using a cell phone.
|
3 |
Novel Designs for Broadband Slot Mobile Phone AntennaLin, Po-wei 22 June 2011 (has links)
In this thesis, two novel broadband slot mobile phone antenna designs respectively for penta-band WWAN operation and eight-band LTE/WWAN operation are presented. The antennas are suitable to be mounted near the bottom edge of the system ground plane of the mobile phone. Good radiation characteristics for the antennas are obtained, and the two antennas respectively occupy a small printed area of 50 ¡Ñ 4 mm2 and 53 ¡Ñ 4 mm2. The first design uses a C-shaped strip connected to the bottom edge of the system ground plane to make the structure of the system ground plane close to a symmetric shorted dipole antenna. This makes it promising to excite a chassis mode to enhance the operating bandwidth of the antenna. The second one uses a microstrip feedline having a chip-inductor-loaded branch. The novel microstrip feedline can lead to more uniform distribution of the electric fields excited in the slot such that enhanced bandwidth of the antenna¡¦s lower band is obtained. Further, since the chip inductor performs like a low-pass filter, the original bandwidth of the antenna¡¦s upper band is not affected. Additionaly, the impedance matching of the lower frequencies of the upper band can be improved, which enhances the upper-band bandwidth of the antenna. Effects of the user¡¦s head and hand on the proposed antenna are also studied, and the simulated SAR and HAC issues are also analyzed in this thesis.
|
4 |
Effects of Signals from Mobile Communication Base Station and Handset on the SAR Distribution in the Human HeadChen, Yu-chi 15 August 2005 (has links)
In recent years, the wireless communication operators use more and more systems based on the transmission and reception of EM waves. As a result, more and more base stations are being installed on the rooftop of existing buildings in densely populated areas. The prevailing of wireless communications has prompted the public¡¦s concern of the health issue. To date, the most prominent and scientifically verifiable biological effect of EM waves is the heating effect. In order to maintain the users¡¦ health from the over-heating due to excessive use, analysis of the temperature distribution inside the human body is also very critical as well as the SAR guidelines.
The purpose of this thesis is to investigate the SAR values and temperature distribution inside the human head, under the EM exposure of mobile communication base station and handset based on the use of finite-difference time-domain (FDTD) method. In general, we assumed that the far-field exposure of base station are uniform plane-wave exposures. The total-field / scattered-field (TF/SF) formulation implements a compact uniform plane-wave source permitting FDTD simulations to accurately predict the SAR distribution in the human head due to uniform plane-wave exposures. Furthermore, this thesis investigates the effects of the rectangular frames of the metallic spectacles at 900MHz and 1.8 GHz for the uniform plane wave.
|
5 |
MULTISCALE MODELING OF III-NITRIDE CORE-SHELL SOLAR CELLSAbdullah, Abdulmuin Mostafa 01 May 2017 (has links)
Multiscale computational simulations are performed to investigate how electronic structure and optical absorption characteristics of recently reported nanostructured III-nitride core-shell MQW solar cells are governed by an intricate coupling of size-quantization, atomicity, and built-in structural and polarization fields. The core computational framework, as available in our in-house QuADS 3-D simulator, is divided into four coupled phases: 1) Geometry construction for the wurtzite lattice having hexagonal crystal symmetry and non-conventional crystal orientations; 2) Structural relaxation and calculation of atomistic strain distributions using the VFF Keating molecular-mechanics model, which employs a conjugate gradient energy minimization scheme; 3) Obtaining the induced polarization and internal potential distributions using a 3-D atomistic Poisson solver; 4) Computing the single-particle electronic structure and optical transition rates using a 10- band sp3 s*-spin tight-binding framework; and 5) Using a TCAD toolkit, study the carrier transport and obtain the device terminal characteristics. Special care was taken in incorporating the nonpolar m-plane crystallographic orientation within the simulator via appropriate lattice vectors, rotational matrices, neighboring atom co-ordinates and sp3-hybridized passivation scheme. Numerical calculations of electronic structure properties are generally based on non-primitive rectangular unit cell. The rectangular geometry approximation is still valid and can be considered even in the presence of strain in nanostructures such as quantum wells, nanowires, and even in self-assembled quantum dots with varying composition. With this approximation, atoms are grouped into traditional unit cells resulting in simpler analysis and better storage scheme, which results in more dynamic and easily debugged algorithms. Note that the contribution of the second-order piezoelectric polarization is small in the nonpolar m-plane structure (as compared to the polar c-plane counterpart) and was neglected in this study. Besides, the spontaneous polarization is non-existent in m-plane structure. The polarization fields are incorporated in the Hamiltonian as an external potential within a non-self-consistent approximation. From the simulations, it is found that, even without the inclusion of any internal fields, the crystal symmetry is lowered compared to ideal geometries, which is due mainly to the fundamental atomicity and interface discontinuities. However, with the inclusion of internal polarization fields, although the symmetry is lowered further, the m-plane structure exhibits a stronger overlap and localization of the wavefunctions, as compared to the c-plane counterpart. Importantly, strain, in the m-plane structure, causes a larger splitting of the topmost valence band and the interband transition probability involving the 4th valence band was found to be highest. Overall, the m-plane structure offers higher spontaneous emission rate and internal quantum efficiency (IQE) as well as an improved fill-factor.
|
6 |
Exposure-Aware Signal Design for Millimeter Wave MIMO Communication SystemsMiguel R Castellanos Llorca (8812094) 08 May 2020 (has links)
All wireless devices expose users to some level of electromagnetic radiation during operation. In many countries, exposure levels are strictly regulated to ensure the safety of consumers. Previous research demonstrates that incorporating exposure constraints into transmit signal design leads to substantial capacity gains over traditional power back-off techniques. This is especially vital for millimeter wave systems, which require large array gains to combat high path losses and are more susceptible to a decrease in transmit power. In this work, we present exposure modeling procedures and exposure-aware transmission schemes for millimeter wave systems. We first develop methods to approximate the characteristic matrix of a quadratic model for two exposure measures in the millimeter wave band: incident power density and surface specific absorption rate (SAR). The proposed models can be calculated with a small number of parameters and can be altered to account for changes in the exposure scenario. Software simulations with half-wave dipole antennas corroborate the accuracy of the exposure models in the millimeter wave band. We then exploit the ability of the model to calculate exposure at any point surrounding the device to develop efficient exposure-aware signaling strategies. Finally, we propose a low-complexity perturbation approach to obtain exposure-compliant beamforming vectors. Analytical and numerical results demonstrate that the proposed exposure-aware signaling techniques outperform power reduction approaches.
|
7 |
Penetration models in Real Estate Market Analysis : A case study in Lidingö MunicipalityKooakachai, Sunchai January 2011 (has links)
Although the concept of real estate market analysis are more widely used in real estate industry but penetration rate seem to be misunderstood by some commentators in the market. To accomplish a penetration analysis, existing models have to extensive taking the specific characteristics of explainable model and techniques that allow the market commentators to estimate penetration rate with more accuracy through existing models by integrate changes in the macro economy. The main purpose of this paper is to explain and analyze to give some issues for the prediction of how business cycle and real estate cycle will affect to penetration rate. The scope of this thesis is to study of a medium sized complete residential development in Sweden namely Gåshaga Pirar in Lidingö municipality.
|
8 |
Enhanced Microwave Hyperthermia using NanoparticlesUrdaneta, Maryory 01 January 2015 (has links)
In this dissertation a study of enhanced hyperthermia for cancer treatment through the use of magnetic nanoparticles is presented. Hyperthermia has been in use for many years, as a potential alternative method in cancer treatment, and high frequency microwave radiation has been used successfully to raise the tumor temperature to around 42°C in superficial tumors without causing damage to surrounding healthy tissues. Magnetic fluid hyperthermia involves the use of magnetic nanoparticles injected into the tumor before exposure to microwave radiation. The magnetic energy in the nanoparticles is converted into heat allowing for a more rapid rise of temperature in the tumor to the desired level. In addition, the nanoparticles allow the electromagnetic absorption to be focused in the tumor and can be used to treat deep tumors in organs, such as the liver. Iron oxide magnetic nanoparticles were considered for this study as they are non-toxic and bio-compatible. For the case of breast cancer, the values for the temperature and specific absorption rate (SAR) in the tumor and in the healthy tissue were obtained through simulations and validated by measurement done on phantom models. Various characteristics of the nanoparticles such as radius, magnetic susceptibility and concentration were considered. In order to take the effect of the blood flow, which causes cooling and helps maintain the body temperature, various blood perfusion rates for a tumor in the liver were studied. A human male model in SEMCAD X, in which blood flow can be adjusted, was used for simulations. The tumor was injected with the nanoparticles and the change in temperature upon exposure to electromagnetic radiation was observed. The simulated results were compared with measured results on a liver phantom model in which saline solution was used to model blood flow. There was good agreement between the measured and simulated results.
|
9 |
Implanted Antennas and Intra-Body Propagation Channel for Wireless Body Area NetworkIbraheem, Ali Ahmed Younis 25 November 2014 (has links)
Implanted Devices are important components of the Wireless Body Area Network (WBAN) as a promising technology in biotelemetry, e-health care and hyperthermia applications. The design of WBAN faces many challenges, such as frequency band selection, channel modeling, antenna design, physical layer (PHY) protocol design, medium access control (MAC) protocol design and power source. This research focuses on the design of implanted antennas, channel modeling between implanted devices and Wireless Power Transfer (WPT) for implanted devices. An implanted antenna needs to be small while it maintains Specific Absorption Rate (SAR) and is able to cope with the detuning effect due to the electrical properties of human body tissues. Most of the proposed antennas for implanted applications are electric field antennas, which have a high near-zone electric field and, therefore, a high SAR and are sensitive to the detuning effect. This work is devoted to designing a miniaturized magnetic field antenna to overcome the above limitations. The proposed Electrically Coupled Loop Antenna (ECLA) has a low electric field in the near-zone and, therefore, has a small SAR and is less sensitive to the detuning effect. The performance of ECLA, channel model between implanted devices using Path Loss (PL) and WPT for implanted devices are studied inside different human body models using simulation software and validated using experimental work. The study is done at different frequency bands: Medical Implanted Communication Services (MICS) band, Industrial Scientific and Medical (ISM) band and 3.5 GHz band using ECLA. It was found that the proposed ECLA has a better performance compared to the previous designs of implanted antennas. Based on our study, the MICS band has the best propagation channel inside the human body model among the allowed frequency bands. The maximum PL inside the human body between an implanted antenna and a base station on the surface is about 90 dB. WPT for implanted devices has been investigated as well, and it has been shown that for a device located at 2 cm inside the human body with an antenna radius of 1 cm an efficiency of 63% can be achieved using the proposed ECLA. / Ph. D.
|
10 |
SAR and Radiation Performance of Balanced and Unbalanced Mobile Antennas using a Hybrid Computational Electromagnetics FormulationAbd-Alhameed, Raed, Excell, Peter S., Khalil, Khaled, Alias, R., Mustafa, J. January 2004 (has links)
No / A procedure to reduce the effect of the mobile antenna on the handset by using balanced antennas has been investigated. Use of this type of antenna may degrade the antenna performance, such as bandwidth and gain, although it can cause less effect on the body to which they are adjacent. If the antennas are well designed, the maximum specific absorption rate (SAR) values are likely to be reduced when placed next to the head, since the coupling of such antennas to the body of the handset is very weak. A study on balanced and unbalanced antennas for mobile handsets next to the human head is presented, using a hybrid electromagnetics method for the analysis. The method uses the hybridisation technique between the frequency-domain method of moments (MoM) and the finite-difference time-domain method (FDTD). The antenna was modelled using MoM whereas the head tissues were modelled using FDTD. Two antennas were designed and investigated with respect to the SAR and radiation performance for two different antenna positions on the top edge of a mobile handset. Radiation patterns are presented and compared, with and without the head, and the maximum SAR values and field distributions inside the head are discussed. The balanced antenna shows good improvements with respect to the unbalanced antenna in terms of the SAR values and variations of the input impedances.
|
Page generated in 0.3891 seconds