This dissertation describes our study of a photophysical process that leads to ultrafast generation of triplet excitons following photoexcitation, singlet exciton fission, in three different acene dimers and diradicaloids. In pentacene and tetracene dimers, we investigate their mechanism of singlet fission. In a series of diradicaloids, we study the relation between molecular structure, diradical character and the suitability for singlet fission. In the first two chapters we explore singlet fission in pentacene dimer. We demonstrate fast and highly efficient intramolecular singlet fission, consisting of two covalently attached pentacene units. The singlet fission pathway is governed by the energy gap between singlet and charge-transfer states, which change dynamically with molecular geometry but are primarily set by the side group. The process exhibits a sensitivity to solvent polarity and competes with geometric relaxation in the singlet state, while subsequent triplet decay is strongly dependent on conformational freedom. The near orthogonal arrangement of the pentacene units is unlike any structure currently proposed for efficient singlet fission and points toward new molecular design rules. Furthermore, these results are the first to demonstrate the role of charge-transfer states in singlet fission and highlight the importance of solubilising groups to optimise excited-state photophysics. In the next chapter, we examine singlet fission in tetracene dimer, where singlet fission is energetically unfavourable. We demonstrate triplet yield as high as 190% can be achieved via fission from higher singlet excited states mediated by charge-transfer states. The outcomes of this study provide deeper insight into the role of hot singlet states in singlet fission and point toward less stringent molecular design rules. In the last chapter, we shift our focus on a new class of molecules, diradicaloid molecules. We explore a family of zethrene molecules, with tuneable diradical character, and demonstrate their general ability to undergo rapid singlet fission via spin-entangled and emissive triplet-pair state TT. A wide range of zethrene molecules are found to be suitable for singlet fission, with additional benefits of high absorption coefficients and photo-/chemical stability.

No description available.

No description available.

Polycyclic aromatic hydrocarbons composed of benzenoid rings fused in a linear fashion comprise the class of compounds known as acenes. The structures containing three to six ring fusions are brightly colored and possess band gaps and charge transport efficiencies sufficient for semiconductor applications. These molecules have been investigated throughout the past several decades to assess their optoelectronic properties. The absorption, emission and charge transport properties of this series of molecules has been studied extensively to elucidate structure-property relationships. A wide variety of analogous molecules, incorporating heterocycles in place of benzenoid rings, demonstrate similar properties to the parent compounds and have likewise been investigated. Functionalization of acene compounds by placement of groups around the molecule affects the way in which molecules interact in the solid state, in addition to the energetics of the molecule. The use of electron donating or electron withdrawing groups affects the frontier molecular orbitals and thus affects the optical and electronic gaps of the molecules. The use of bulky side groups such as alkylsilylethynyl groups allows for crystal engineering of molecular aggregates, and changing the volume and dimensions of the alkylsilyl groups affects the intermolecular interactions and thus changes the packing motif. In chapter 2, a series of tetracene and pentacene molecules with strongly electron withdrawing groups is described. The investigation focuses on the change in energetics of the frontier molecular orbitals between the base acene and the nitrile and dicyanovinyl derivatives as well as the differences between the pentacene and tetracene molecules. The differences in close packing motifs through use of bulky alkylsilylethynyl groups is also discussed in relation to electron acceptor material design and bulk heterojunction organic photovoltaic characteristics. Chapter 3 focuses on molecular acceptor and donor molecules for bulk heterojunction organic photovoltaics based on anthrathiophene and benzo[1,2-b:4,5-b’]dithiophene central units like literature molecules containing fluorene and dithieno[2,3-b:2’,3’-d]silole cores. The synthetic strategies of developing reduced symmetry benzo[1,2-b:4,5-b’]dithiophene to study the effect of substitution around the central unit is also described. The optical and electronic properties of the donors and acceptors are described along with the performance and characteristics of devices employing these molecules. The final two data chapters focus on new nitrogen containing polycyclic hydrocarbons containing indolizine and (2.2.2) cyclazine units. The optical, electronic and other physical properties of these molecules are explored, in addition to the synthetic strategies for incorporating the indolizine and cyclazine units. By use of alkylsilylethynyl groups, crystal engineering was investigated for the benzo[2,3-b:5,6-b’]diindolizine chromophore described in chapter 4 to target the 2-D “brick-work” packing motif for application in field effect transistor devices. Optical and electronic properties of the cyclazine end-capped acene molecules described in chapter 5 were investigated and described in relation to the base acene molecules. In both cases, density functional theory calculations were conducted to better understand unexpected optical properties of these molecules, which are like the linear acene series despite the non-linear attachment.

Inorganic materials have dominated electronic applications such as photovoltaic cells, thin film transistors (TFTs) and light emitting diodes (LEDs). However developments in the field of organic electronics over the past three decades have enabled the use of organic materials in these devices. While significant improvements have been made to improve their electronic properties there are several road blocks towards commercial application. One of the significant obstacles is the poor charge carrier mobility associated with organic semiconductors processed by well established printing methods. The goal of my research project is to improve the charge carrier mobility of solution cast films of acene semiconductors by partial halogenation and heteroatom substitution. Spin coated films of triisopropylsilylethynylated difluoropentacene exhibited higher hole mobility compared to TIPS pentacene due to contact induced nucleation of pentacene on perfluorobenzenethiol treated gold electrodes. The success of this project allowed me to further investigate the effect of degree of fluorination on the electronic properties of pentacene. A series of trialkylsilylethynylated tetrafluoro and octafluoropentacenes were synthesized and their performances in thin film transistors and solar cells were explored. Solar cells made from these materials using poly(3-hexylthiophene) as donor exhibited poor open circuit voltages (Voc) resulting in low power conversion efficiency (PCE). Better device performances were achieved using pentacenes having single halogen substituent. In order to improve the charge carrier mobility in TFTs soluble trialkylsilylethynylated hexacenes were explored. However these molecules exhibited a greater tendency to photo-dimerize in solution and solid state. Partial halogenation was used as a tool to improve the solution stability of reactive hexacene. The improved solution stability of partially halogenated hexacenes allowed me to successfully extend this approach to heptacene and nonacene. Finally a series of new trialkylsilylethynylated anthradiselenophenes were synthesized to improve molecular ordering in the solid state by increasing non-bonding Se – Se interaction. However single crystal x-ray diffraction studies revealed no such interaction between the acene chromophore resulting in poor device performance.

For the investigation of single molecules on surfaces, STM under UHV and at low temperatures is the experimental technique of choice. Inelastic STM is, furthermore, able to manipulate the target structures and to induce chemical reactions or to control single molecule mechanics precisely. This thesis presents inelastic STM experiments on three different molecules as a tool for the electronic manipulation at a single molecule level. The first part of this work concerns the on-surface synthesis of dodecacene, the longest acene molecule obtained so far. Acenes as smallest zigzag edge graphene nanoribbons and model 1D electronic system play an important role in both experimental and theoretical science. Due to the high reactivity and low solubility of long acenes, precursor molecules were deoxygenated step wise in an on-surface reaction triggered by inelastic tunneling and through annealing at increasing temperatures. The molecular structure was proven by high resolution STM employing a CO functionalized tip. Additionally, the electronic states of the molecule were observed in the energy spectrum by STS and their spatial distribution was measured in dI/dV maps. The increase in the band gap compared to shorter acenes was explained by increasing contributions of multiradical states to the electronic states and higher orbitals participating in virtual tunneling states. In the second part of this work, the inelastic tunneling effect was used to investigate the conversion of electrical into mechanical energy in azulene derivatives carrying a large dipole moment. Metal organic complexes consisting of gold adatoms and pristine as well as cleaved molecules were formed upon evaporation of BCA. These structures were identified with the aid of theoretical calculations. Voltage pulse experiments at different tunneling resistance revealed that the electric field in combination with the charge distribution of the structures is the origin of the motion. Metal organic complexes of cleaved molecules could be moved on the surface in a controlled way and driven along an arbitrarily chosen parcours. The third part of this work concerns the investigation of DMBI-P molecules as rotors for molecular machines. Demethylation during evaporation was used to create an open radical bond stably anchoring the molecule on the surface. This was utilized for a step wise rotation where the direction is controlled by the voltage sign and chirality of the molecule on the surface. A C-H stretch mode was identified as its origin, serving as energy entry channel excited by inelastic tunneling electrons. Temperature dependent measurements and theoretical calculations yielded the potential barrier for the rotation. / Rastertunnelmikroskopie (RTM) unter UHV Bedingungen und bei tiefen Temperaturen ist die experimentelle Methode der Wahl zur Untersuchung von Einzelmolekülen auf Oberflächen. Darüber hinaus ist inelastische RTM in der Lage, die Zielstrukturen zu manipulieren und chemische Reaktionen auszulösen oder die Mechanik der einzelnen Moleküle präzise zu kontrollieren. Diese Dissertation behandelt inelastische RTM-Experimente an drei verschiedenen Molekülen als Werkzeug zur elektronischen Manipulation einzelner Moleküle. Der erste Teil der Arbeit behandelt die Oberflächensynthese von Dodecacen, des längsten bisher erzeugten Acens. Als kleinste Graphen-Nanobänder mit Zickzack-Rand und Modell für eindimensionale elektronische Systeme spielen Acene sowohl in Theorie als auch Experimentalphysik eine wichtige Rolle. Aufgrund der hohen Reaktivität und geringen Löslichkeit langer Acene wurden Vorläufermoleküle sowohl durch inelastisches Tunneln als auch durch Heizen des Substrates schrittweise deoxygeniert. Die Molekülstruktur wurde durch hochaufgelöste RTM mittels einer CO-funktionalisierten Spitze nachgewiesen. Zusätzlich konnten die elektronischen Zustände des Moleküls im Energiespektrum identifiziert und ihre räumliche Verteilung in dI/dV-Karten festgehalten werden. Die Vergrößerung der Bandlücke im Vergleich zu kürzeren Acenen konnte hierbei durch zunehmenden Einfluss multiradikaler Zustände auf den Grundzustand des Moleküls und den Beitrag höherer Molekülorbitale zu den virtuellen Tunnelzuständen erklärt werden. Im zweiten Teil dieser Arbeit wird die inelastische RTM dazu genutzt, um die Umwandlung von elektrischer Energie in mechanische mittels Azulen-Derivaten mit großem Dipolmoment zu untersuchen. Bei der Verdampfung bilden diese metallorganische Komplexe aus Goldatomen und sowohl intakten als auch gespaltenen Molekülen. Deren Strukturen wurden mit Hilfe von Berechnungen identifiziert. Experimente mit Spannungspulsen bei unterschiedlichen Tunnelwiderständen enthüllten das elektrische Feld in Kombination mit der Ladungsverteilung der Strukturen als Ursprung der Bewegung. Die metallorganischen Komplexe aus gespaltenen Molekülen konnten zielgerichtet auf der Oberfläche durch einen zufällig gewählten Parcours bewegt werden. Der dritte Teil dieser Arbeit behandelt die Untersuchung von DMBI-P Molekülen zur Verwendung als Rotoren für molekulare Maschinen. Eine Demethylierung während der Verdampfung erzeugt eine offene Bindung, die das Molekül stabil auf der Oberfläche verankert. Dies wurde für eine schrittweise Rotation genutzt, deren Richtung durch das Vorzeichen der Spannung und die Chiralität auf der Oberfläche kontrolliert werden konnte. Eine C-H Streckschwingung dient hierbei als Eintrittskanal der durch inelastische Elektronen bereitgestellten Energie. Temperaturabhängige Messungen und theoretische Berechnungen lieferten die Potentialbarriere für die Rotation.

xx, 318 p. ： ill. (some col.) / Highly conjugated, carbon rich molecules are of great interest due to their unique optoelectronic properties. These molecules are now recognized as suitable materials for advanced materials applications such as light-emitting diodes, photovoltaics, and thin film transistors. Of particular interest is the indenofluorene (IF) scaffold, a 6-5-6-5-6-fused ring system that holds a striking topological similarity to pentacene, a very successful electron donating organic semiconductor. Also of interest is another class of compounds referred to as tetrakis(arylethynyl)benzenes, TAEBs, which are cruciform-shaped molecules that possess numerous pathways for electronic and photonic transfer and are amenable to a host of substitution patterns. Chapter I examines the history of the IF scaffold and its development over the last century through the use of literature examples relating to both its synthesis and potential use as an emerging class of electron accepting materials. Chapter II introduces the feasibility of stable, fully conjugated IFs. Two examples of 5,6,11,12-tetraethynyl-indeno[1,2- b ]fluorenes are synthesized where their structural and optoelectronic properties are explored. Chapter III further explores the IF scaffold and outlines the synthesis of a series of 6,12-diethynylindeno[1,2-b ]fluorenes in conjunction with detailed computational, structural, and photophysical studies. Chapter IV discusses the synthesis and characterization of a series of 6,12-diarylindeno[1,2- b ]fluorenes and examines their structural and optoelectronic properties. Chapter V describes a series of donor/acceptor-functionalized TAEBs that incorporate the 4,4-difluoro-4-bora-3a,4a,-diaza-s -indacene moiety, better known as BODIPY, as the acceptor unit. Additionally, two TAEB molecules and three structurally related bis(arylethynyl)benzene (BAEB) isomers where only acceptors are used to evaluate the effectiveness of the donor group are synthesized. This dissertation includes both previously published and unpublished co-authored material. / Committee in charge: Professor David R. Tyler， Chairperson； Professor Michael M. Haley， Advisor； Professor Victoria J. DeRose， Member； Professor Shih-Yuan Liu， Member； Professor Scott D. Bridgham， Outside Member

No description available.

Acenes are a class of polycyclic aromatic hydrocarbons (PAH) with linearly fused benzene rings. They are widely considered as promising materials for organic and molecular electronics. However, larger molecules of this class possessing more than five rings are chemically extremely reactive and show a very low solubility. Hence, large acenes are difficult to handle, and the experimental data available to date is limited. The aim of this work is to show a very promising protocol of how acenes with different lengths can be stabilized and investigated on metallic surfaces. The experimental approach of on-surface synthesis is explored to generate the respective acenes directly on the metallic substrate via the reduction of suitable precursor molecules. High-resolution scanning probe microscopy (SPM) is employed at a temperature of 5 K to verify the chemical conversion at a single-molecule level. In the first part of this work, the on-surface synthesis of acenes is introduced via the example of tetracene (4-acene) formation on Cu(111). Precursors with 1,4-epoxy moieties preferably adsorb with their oxygen-rich site facing the substrate. Subsequently, they can be deoxygenated via annealing of the substrate or by single-molecule manipulation with the tip of the scanning probe microscope. In both cases, atomic force microscopy (AFM) measurements resolve the planar adsorption geometry of tetracene on the surface with atomic resolution. Based on these findings, scanning tunneling microscopy (STM) is employed to investigate the self-assembly patterns of on-surface generated anthracene (3-acene) and tetracene molecules after synthesis on Au(111). These measurements show intriguing organic nanostructures and supramolecular networks that can form at the metallic interface upon thermally-induced surface reactions. The second part of this thesis focuses on the electronic structure of acenes adsorbed on a metallic substrate. By applying the novel method of on-surface reduction, single and isolated hexacene (6-acene) molecules are investigated on Au(111). Scanning tunneling spectroscopy (STS) measurements indicate a weak interaction with the substrate and reveal five accessible molecular resonances at the organic-metal interface. The differential conductance maps with high spatial resolution at the respective resonant bias values compare well to elastic scattering quantum chemistry-based calculations. Finally, the experimental investigations of Br-substituted precursors show the stabilization of genuine unsubstituted heptacene (7-acene), as confirmed by imaging of the molecular structure via atomic-resolution STM. Accordingly, the precise characterization of this molecule via STS allows more insight into the electronic structure of adsorbed acenes with respect to their length. / Acene sind eine Klasse von polyzyklischen aromatischen Kohlenwasserstoffen mit linear kondensierten Benzolringen. Sie gelten weithin als vielversprechende Materialien für die organische und molekulare Elektronik. Jedoch sind die größeren Moleküle dieser Klasse mit mehr als fünf Ringen chemisch extrem reaktiv und zeigen eine sehr geringe Löslichkeit, daher gibt es bisher nur wenige experimentelle Untersuchungen ihrer Eigenschaften. Das Ziel dieser Arbeit ist es, Acene mit unterschiedlichen Längen auf einer metallischen Oberfläche stabilisieren und untersuchen zu können. Dabei wird der experimentelle Ansatz der Oberflächensynthese verfolgt und die jeweiligen Acene durch Reduktion von geeigneten Präkursoren direkt an einer metallischen Grenzfläche hergestellt. Hochauflösende Rastersondenmikroskopie an einzelnen Molekülen bei einer Temperatur von 5K nimmt dabei eine Schlüsselrolle im Nachweis der chemischen Umwandlung auf der Oberfläche ein. Im ersten Teil dieser Arbeit wird die Oberflächensynthese von Acenen am Beispiel von Tetracen (4-Acen) auf Cu(111) eingeführt. Die Ausgangsmoleküle mit funktionellen Gruppen adsorbieren bevorzugt mit ihrer sauerstoffreichen Seite auf dem Substrat und können dort sowohl thermisch als auch mithilfe der Spitze des Rastersondenmikroskops umgewandelt werden. In beiden Fällen wird die planare Adsorptionsgeometrie von Tetracen auf der Oberfläche mittels Rasterkraftmikroskopie mit atomarer Auflösung abgebildet. Darauf aufbauend wird Rastertunnelmikroskopie genutzt, um die Selbstassemblierung von Anthracen (3-Acen) und Tetracen nach der jeweiligen Synthese auf Au(111) zu untersuchen. Die Messungen zeigen unerwartete organische Nanostrukturen und supramolekulare Netzwerke, welche sich an der metallischen Grenzfläche durch die induzierte Oberflächenreduktion bilden können. Der zweite Teil dieser Arbeit beschäftigt sich mit den elektronischen Eigenschaften von adsorbierten Acenen. Durch die neuartige Methode der Oberflächenreduktion können einzelne Hexacene (6-Acen) auf Au(111) untersucht werden. Messungen basierend auf Rastertunnelspektroskopie geben Hinweise auf die schwache Wechselwirkung mit dem Substrat und zeigen fünf molekulare Eigenzustände, die im Experiment zugänglich sind. Die entsprechenden Abbildungen der differentiellen Leitfähigkeiten mit hoher Ortsauflösung sind in guter Übereinstimmung mit einer quantenmechanischen Modellierung. Schließlich wird die Stabilisierung von Heptacen (7-Acen) von Br-substituierten Präkursoren mittels Rastertunnelmikroskopie mit atomarer Auflösung gezeigt. Dadurch kann die elektronische Struktur von adsorbierten Acenen anhand ihrer Länge verglichen werden.

Acenes are a class of polycyclic aromatic hydrocarbons (PAH) with linearly fused benzene rings. They are widely considered as promising materials for organic and molecular electronics. However, larger molecules of this class possessing more than five rings are chemically extremely reactive and show a very low solubility. Hence, large acenes are difficult to handle, and the experimental data available to date is limited. The aim of this work is to show a very promising protocol of how acenes with different lengths can be stabilized and investigated on metallic surfaces. The experimental approach of on-surface synthesis is explored to generate the respective acenes directly on the metallic substrate via the reduction of suitable precursor molecules. High-resolution scanning probe microscopy (SPM) is employed at a temperature of 5 K to verify the chemical conversion at a single-molecule level. In the first part of this work, the on-surface synthesis of acenes is introduced via the example of tetracene (4-acene) formation on Cu(111). Precursors with 1,4-epoxy moieties preferably adsorb with their oxygen-rich site facing the substrate. Subsequently, they can be deoxygenated via annealing of the substrate or by single-molecule manipulation with the tip of the scanning probe microscope. In both cases, atomic force microscopy (AFM) measurements resolve the planar adsorption geometry of tetracene on the surface with atomic resolution. Based on these findings, scanning tunneling microscopy (STM) is employed to investigate the self-assembly patterns of on-surface generated anthracene (3-acene) and tetracene molecules after synthesis on Au(111). These measurements show intriguing organic nanostructures and supramolecular networks that can form at the metallic interface upon thermally-induced surface reactions. The second part of this thesis focuses on the electronic structure of acenes adsorbed on a metallic substrate. By applying the novel method of on-surface reduction, single and isolated hexacene (6-acene) molecules are investigated on Au(111). Scanning tunneling spectroscopy (STS) measurements indicate a weak interaction with the substrate and reveal five accessible molecular resonances at the organic-metal interface. The differential conductance maps with high spatial resolution at the respective resonant bias values compare well to elastic scattering quantum chemistry-based calculations. Finally, the experimental investigations of Br-substituted precursors show the stabilization of genuine unsubstituted heptacene (7-acene), as confirmed by imaging of the molecular structure via atomic-resolution STM. Accordingly, the precise characterization of this molecule via STS allows more insight into the electronic structure of adsorbed acenes with respect to their length. / Acene sind eine Klasse von polyzyklischen aromatischen Kohlenwasserstoffen mit linear kondensierten Benzolringen. Sie gelten weithin als vielversprechende Materialien für die organische und molekulare Elektronik. Jedoch sind die größeren Moleküle dieser Klasse mit mehr als fünf Ringen chemisch extrem reaktiv und zeigen eine sehr geringe Löslichkeit, daher gibt es bisher nur wenige experimentelle Untersuchungen ihrer Eigenschaften. Das Ziel dieser Arbeit ist es, Acene mit unterschiedlichen Längen auf einer metallischen Oberfläche stabilisieren und untersuchen zu können. Dabei wird der experimentelle Ansatz der Oberflächensynthese verfolgt und die jeweiligen Acene durch Reduktion von geeigneten Präkursoren direkt an einer metallischen Grenzfläche hergestellt. Hochauflösende Rastersondenmikroskopie an einzelnen Molekülen bei einer Temperatur von 5K nimmt dabei eine Schlüsselrolle im Nachweis der chemischen Umwandlung auf der Oberfläche ein. Im ersten Teil dieser Arbeit wird die Oberflächensynthese von Acenen am Beispiel von Tetracen (4-Acen) auf Cu(111) eingeführt. Die Ausgangsmoleküle mit funktionellen Gruppen adsorbieren bevorzugt mit ihrer sauerstoffreichen Seite auf dem Substrat und können dort sowohl thermisch als auch mithilfe der Spitze des Rastersondenmikroskops umgewandelt werden. In beiden Fällen wird die planare Adsorptionsgeometrie von Tetracen auf der Oberfläche mittels Rasterkraftmikroskopie mit atomarer Auflösung abgebildet. Darauf aufbauend wird Rastertunnelmikroskopie genutzt, um die Selbstassemblierung von Anthracen (3-Acen) und Tetracen nach der jeweiligen Synthese auf Au(111) zu untersuchen. Die Messungen zeigen unerwartete organische Nanostrukturen und supramolekulare Netzwerke, welche sich an der metallischen Grenzfläche durch die induzierte Oberflächenreduktion bilden können. Der zweite Teil dieser Arbeit beschäftigt sich mit den elektronischen Eigenschaften von adsorbierten Acenen. Durch die neuartige Methode der Oberflächenreduktion können einzelne Hexacene (6-Acen) auf Au(111) untersucht werden. Messungen basierend auf Rastertunnelspektroskopie geben Hinweise auf die schwache Wechselwirkung mit dem Substrat und zeigen fünf molekulare Eigenzustände, die im Experiment zugänglich sind. Die entsprechenden Abbildungen der differentiellen Leitfähigkeiten mit hoher Ortsauflösung sind in guter Übereinstimmung mit einer quantenmechanischen Modellierung. Schließlich wird die Stabilisierung von Heptacen (7-Acen) von Br-substituierten Präkursoren mittels Rastertunnelmikroskopie mit atomarer Auflösung gezeigt. Dadurch kann die elektronische Struktur von adsorbierten Acenen anhand ihrer Länge verglichen werden.