Despite numerous advantages of using particles in a wide range of applications, they have one drawback that is their tendency to agglomerate. One way to overcome this problem is to sterically  stabilize the particles by introducing polymeric  chains covalently attached to the surface. Surface modification by covalently attaching polymer chains to the particle surface can be achieved by e.g. a ‘grafting-from’ technique under UV irradiation. In this thesis, polylactide (PLA) particles were surface modified, under UV irradiation, with the hydrophilic monomers: acrylamide (AAm), acrylic acid (AA), and maleic anhydride (MAH). The developed ‘grafting-from’ technique was shown to be nondestructive method for surface modification of PLA particles of two different geometries. The change in surface chemistry of the PLA particles was confirmed by FTIR and XPS, indicating the success of the surface grafting technique. Force interaction between two surface grafted PLA substrates was measured by colloidal probe AFM in different salt concentrations. In order to understand the repulsive force, the AFM force profiles were compared to the DLVO theory and AdG model. Long range repulsive interactions were mainly observed when hydrophilic polymers were covalently attached to the surface of PLA particles, leading to steric interaction. Attractive force dominated the interaction when neat PLA particle was approaching each other, resulting in particle aggregation, even though short range repulsion was observed at small separation distance, i.e. approximately 10 nm. Attractive interaction was also observed when neat PLA was approaching to PAA-grafted PLA substrate. This attractive interaction was much greater than force interaction between two neat PLA substrates.  The surface grafted particles can be used in biomedical application where secondary interactions are important to overcome particle agglomeration such as particle-based drug delivery. / <p>QC 20130529</p>

No description available.

Disabled-2 (Dab2) is an adapter protein that interacts with cell membranes and it is involved in several biological processes including endocytosis and platelet aggregation. During endocytosis, the Dab2 phosphotyrosine-binding (PTB) domain mediates protein binding to phosphatidylinositol 4,5-bisphosphate (PIP2) at the inner leaflet of the plasma membrane and helps co-localization with clathrin coats. Dab2, released from platelet alpha granules, inhibits platelet aggregation by binding to the °IIb? integrin receptor on the platelet surface through an Arg-Gly-Asp (RGD) motif located within the PTB domain. Alternatively, Dab2 binds sulfatides on the platelets surface, and this binding partition Dab2 in two pools (sulfatide and integrin receptor-bound states), but the biological consequences of lipid binding remain unclear. Dab2 binds sulfatides through two basic motifs located on its N-terminal region including the PTB domain (N-PTB). We have characterized the binding of Dab2 to micelles, which are widely used to mimic biological membranes. These micellar interactions were studied in the absence and presence of Dab2 lipid ligands, sulfatides and PIP2. By applying multiple biochemical, biophysical, and structural techniques, we found that whereas Dab2 N-PTB binding to PIP2 stabilized the protein but did not contribute to the penetration of the protein into micelles, sulfatides induced conformational changes and facilitated penetration of Dab2 N-PTB into micelles. This is in agreement with previous observation that sulfatides, but not PIP2, protect Dab2 N-PTB from thrombin cleavage. By studying the mechanism by which Dab2 targets membranes, we will have the opportunity to manipulate its function in different lipid-dependent biological processes. / Master of Science

Yes / There are many polymers formed of acrylate monomers in existence. Here we interrogate four commonly-used examples and study how their solution properties are pH dependent, or how their state of ionisation can affect their solution properties. Poly(acrylic acid) and poly(methacrylic acid) are both polyelectrolytes, with ionisable functional groups that make them stimuli responsive, changing their hydrodynamic volume. Poly(acrylamide) is a mass-produced material used in a variety of industrial applications, often with an anionic and cationic co-monomer, which dictates both its efficacy and impact on the environment. Poly(N-isopropyl acrylamide) is a thermally responsive material with applications in smart bioengineering. In solution, these materials can interact with each other due to competing hydrogen bonding interactions. However, this interpolymer complexation is dependent on both the ionisation, and the conformational state, of the polymers involved. This review focuses on the results from fluorescence tagging and turbidimetric techniques.

Yes / Corneal ulcers, a leading cause of blindness in the developing world are treated inappropriately without prior microbiology assessment because of issues related to availability or cost of accessing these services. In this work we aimed to develop a device for identifying the presence of Gram-positive or Gram-negative bacteria or fungi that can be used by someone without the need for a microbiology laboratory. Working with branched poly (N-isopropyl acrylamide) (PNIPAM) tagged with Vancomycin, Polymyxin B, or Amphotericin B to bind Gram-positive bacteria, Gram-negative bacteria and fungi respectively, grafted onto a single hydrogel we demonstrated specific binding of the organisms. The limit of detection of the microbes by these polymers was between 10 and 4 organisms per high power field (100X) for bacteria and fungi binding polymers respectively. Using ex vivo and animal cornea infection models infected with bacteria, fungi or both we than demonstrated that the triple functionalised hydrogel could pick up all 3 organisms after being in place for 30 min. To confirm the presence of bacteria and fungi we used conventional microbiology techniques and fluorescently labelled ligands or dyes. While we need to develop an easy-to-use either a colorimetric or an imaging system to detect the fluorescent signals, this study presents for the first time a simple to use hydrogel system, which can be applied to infected eyes and specifically binds different classes of infecting agents within a short space of time. Ultimately this diagnostic system will not require trained microbiologists for its use and will be used at the point-of-care. / We gratefully acknowledge support for this research by the Well- come Trust which provided funding for Shivshetty, Swift and Pinnock (Grant 0998800/B/12/Z).

Humans are exposed to a variety of chemicals including environmental pollutants, cosmetics, food preservatives and drugs. Some of these substances might be harmful to the human body. Traditional toxicological and behavioural investigations performed in animal models are not suitable for the screening of a large number of compounds for potential toxic effects. There is a need for simple and robust in vitro cellular models that allow high-throughput toxicity testing of chemicals, as well as investigation of specific mechanisms of cytotoxicity. The overall aim of the thesis has been to evaluate neuronally differentiated mouse embryonal carcinoma P19 cells (P19 neurons) as a model for such testing. The model has been compared to other cellular models used for neurotoxicity assessment: retinoic acid-differentiated human neuroblastoma SH-SY5Y cells and nerve growth factor-treated rat pheochromocytoma PC12 cells. The chemicals assessed in the studies included the neurotoxicants methylmercury, okadaic acid and acrylamide, the drug of abuse MDMA (“ecstasy”) and a group of piperazine derivatives known as “party pills”. Effects of the chemicals on cell survival, neurite outgrowth and mitochondrial function have been assessed. In Paper I, we describe a fluorescence-based microplate method to detect chemical-induced effects on neurite outgrowth in P19 neurons immunostained against the neuron-specific cytoskeletal protein βIII-tubulin. In Paper II, we show that P19 neurons are more sensitive than differentiated SH-SY5Y and PC12 cells for detection of cytotoxic effects of methylmercury, okadaic acid and acrylamide. Additionally, in P19 neurons and differentiated SH-SY5Y cells, we could demonstrate that toxicity of methylmercury was attenuated by the antioxidant glutathione. In Paper III, we show a time- and temperature-dependent toxicity produced by MDMA in P19 neurons. The mechanisms of MDMA toxicity did not involve inhibition of the serotonin re-uptake transporter or monoamine oxidase, stimulation of 5-HT2A receptors, oxidative stress or loss of mitochondrial membrane potential. In Paper IV, the piperazine derivatives are evaluated for cytotoxicity in P19 neurons and differentiated SH-SY5Y cells. The most toxic compound in both cell models was TFMPP. In P19 neurons, the mechanism of action of TFMPP included loss of mitochondrial membrane potential. In conclusion, P19 neurons are a robust cellular model that may be useful in conjunction with other models for the assessment of chemical-induced neurotoxicity.

Acrylamide, 2,5-hexanedione, Tri-o-tolyl phosphate and leptophos belong to three fundamentally different chemical classes but all four chemicals cause central-peripheral distal axonopathy. Some of these compounds have been shown to alter brain steady state levels of neurotransmitters or to inhibit the activities of adenosine triphosphatases which are involved in the uptake and storage of biogenic amines. Tests were performed to determine alterations in steady state levels of rat brain norepinephrine and dopamine in response to doses of the above chemicals and of the central nervous system toxin, methyl mercuric chloride sufficient to cause ataxia. Catecholamine synthesis rate constant estimations were performed. Specific activities of tyrosine in brains of control and treatment groups following intravenous injection of labelled tyrosine were compared to determine if passage of tyrosine across the blood-brain barrier were affected by treatments. Levels of the dopamine metabolite, dihydroxyphenylacetic acid were assayed in all cases. Levels of the norepinephrine metabolite, 3-methoxy-4-hydroxymethylethyleneglycol sulfate, were assayed in response to acrylamide administration. Animal weights were recorded at the beginning and end of the treatment period. Rats treated with a cumulative dose of 250 mg/kg acrylamide had significantly lower norepinephrine levels than controls. 2,5-hexanedione administration significantly increased the dopamine synthesis rate constant at a cumulative dose of 210 mg/kg. Cumulative doses of 700 and 2100 mg/kg also appeared to elevate norepinephrine and dopamine synthesis rate constants, but values were not statistically significant. Leptophos caused a slight but significant increase in dopamine levels in rats administered a cumulative dose of 75 mg/kg. Methyl mercuric chloride caused variable effects to norephinephrine synthesis rate and lowered dopamine synthesis rate constant at cumulative doses of 5 to 50 mg/kg. No other alterations were seen in levels of catecholamines or of their metabolites, nor in synthesis rate constants of the catecholamines in response to administration of the five neurotoxic compounds. No evidence of altered blood-brain transport of tyrosine was observed at any level of neurotoxins administered. Rats given the highest cumulative doses of all neurotoxins except tri-o-tolyl phosphate gained significantly less weight than control animals. It was concluded that the four compounds which cause delayed distal neurotoxicity do not alter levels of turnover rates of brain catecholamines in a consistent manner.

Dans le plasma, la protéine humaine de transfert des esters de cholestérol joueun rôle central dans le métabolisme des lipoprotéines plasmatiques en catalysant le transfert net massique d'esters de cholestérol des HDL vers les lipoprotéines contenant de l'Apo.B, et de triglycérides des VLDL vers les HDL et LDL. Bien que le rôle de la CETP sur l'athérogénicité du profil lipoprotéique reste à l'heure actuelle encore ambigu, l'étude des mécanismes de régulation de cette protéine suscite un intérêt croissant d'un point de vue pharmacologique en particulier en ce qui concerne le développement d'inhibiteurs. <br />Une approche in vitro nous a permis de montrer que des composés amphipathiques (acides gras non estérifiés et rétinoïdes) constitués d'une chaîne carbonée hydrophobe et d'un groupement carboxylique ionisable induisaient une augmentation de l'activité de transfert des esters de cholestérol en augmentant l'électronégativité des particules lipoprotéiques. <br />In vivo, nos études ont permis de mettre en évidence une corrélation significative entre la concentration en acides gras non estérifiés liés aux protéines et l'activité de la CETP plasmatique chez des sujets normolipidémiques. L'effet des acides gras non estérifiés est encore plus marqué dans des situations pathologiques associées à une redistribution des AGNE de l'albumine vers les lipoprotéines plasmatiques (analbuminémie ou syndrôme néphrotique). La mise au point d'une méthode électrophorétique spécifique nous a permis de confirmer que, chez des sujets analbuminémiques, les échanges d'esters de cholestérol s'effectuent préférentiellement avec les lipoprotéines les plus électronégatives dont le contenu en AGNE est le plus élevé.<br />Globalement, les résultats de cette étude montrent que les AGNE constituent des modérateurs potentiels de l'activité de transfert des esters de cholestérol au niveau plasmatique et qu'ils pourraient ainsi influencer l'athérogénicité du profil lipoprotéique.

Polymers which are sensitive towards external physical, chemical and electrical stimuli are termed as ‘intelligent materials’ and are widely used in medical and engineering applications. Presently, polymers which can undergo a physical change when heat is applied at a certain temperature (cloud point) in water are well-studied for this property in areas of separation chemistry, gene and drug delivery and as surface modifiers. One example of such a polymer is the poly (N-isopropylacrylamide) PNIPAAM, where it is dissolved well in water below 32 oC, while by increasing the temperature further leads to its precipitation. In this work, an alternative polymer poly (2-(2-methoxy ethoxy)ethyl methacrylate-co- oligo(ethylene glycol) methacrylate) (P(MEO2MA-co-OEGMA)) is studied due to its biocompatibility and the ability to vary its cloud points in water. When a layer of temperature responsive polymer was attached to a single continuous porous piece of silica-based material known as a monolith, the thermoresponsive characteristic was transferred to the column surfaces. The hybrid material was demonstrated to act as a simple temperature ‘switch’ in the separation of a mixture of five steroids under water. Different analytes were observed to be separated under varying column temperatures. Furthermore, more complex biochemical compounds such as proteins were also tested for separation. The importance of this work is attributed to separation processes utilizing environmentally friendly conditions, since harsh chemical environments conventionally used to resolve biocompounds could cause their biological activities to be rendered inactive. / Polymere, welche empfindlich gegenüber externen physikalischen, chemischen und elektrischen Einflüssen sind, werden „intelligente Materialien“ genannt. Diese werden weitverbreitet in medizinischen und technischen Anwendungen eingesetzt. Auf diesem Gebiet ausführlich erforschte Materialien sind Polymere, welche durch Hitze bei einer bestimmten Temperatur (Trübungspunkt) eine physikalische Veränderung eingehen können, genannt thermoresponsive Polymere. Eingesetzt werden diese z.B. in chromatographischen Trennverfahren, in Gen- und Wirkstofftransport Vorgängen und zur Oberflächenmodifikation. Ein Beispiel für so ein Polymer ist das poly(N-isopropylacrylamide) PNIPAAM, welches unter 32 °C in Wasser gelöst vorliegt und mit Erhöhung der Temperatur als Niederschlag ausfällt. In dieser Arbeit wurde ein alternatives Polymer, das poly(2-(2-methoxyethoxy)ethylmethacrylate-co-oligo(ethyleneglycol) methacrylate) (P(MEO2MA-co-OEGMA)), untersucht, in Bezug auf Biokompatibilität und der Änderung des Trübungspunktes in Wasser. Wenn eine Schicht eines temperaturempfindlichen Polymers auf einen Monolithen (einteiliger, poröser und auf Silika-basierendes Material) aufgebracht wird, werden die thermoresponsiven Eigenschaften auf die Oberfläche dieses Monolithen übertragen. Der Monolith dient hier als Säule in einer HPLC-Anlage. Es wurde gezeigt, dass das Hybrid-Material als einfacher „Temperaturschalter“ in der Trennung von fünf verschiedenen Steroiden in Wasser agieren kann. Untersucht wurde die Separation verschiedener Analyten mit dem Variieren der Säulentemperatur. Zusätzlich wurden mehr komplexe biochemische Stoffe, wie Proteine, getestet. Die Bedeutung dieser Arbeit ist zurückzuführen auf Separationsprozesse, welche umweltfreundlichen Bedingungen nutzen, da die rauen chemischen Bedingungen in konventionellen Separationsprozessen die biologische Inaktivität der Verbindungen zur Folge haben können. Der zweite Teil der Arbeit beschäftigte sich mit der Entwicklung eines alternativen Trägermaterials als Ersatz zu den Silika-basierende Trennungssäulen. Kohlenstoffmaterialien sind aufgrund ihrer ausgezeichneten mechanischen Härte und chemischen Stabilität eine vielversprechend Alternative. Die Synthese von Kohlenstoffkugeln als Trägermaterial kann als „grüner“ Prozess in meiner Arbeit angesehen werden, da milde Synthesebedingungen in purem Wasser verwendet wurden. Die Leistungsfähigkeit des Materials wurde mit einer Serie von Separationsreaktionen gezeigt.

Photo-initiated reactions involve the use of ultraviolet (UV) or visible light radiation to effect chemical transformations. Some of the advantages of photo-initiated reactions over thermal or high pressure reactions include mild reaction conditions like ambient temperature and pressure, good control over the reaction by the simple switching on/off the light source, and faster reaction kinetics. Usually, semiconductor photocatalysts or oxidizing agents are used to enhance the rate of photo reactions. “Photocatalysis” involves the generation of valence band holes and conduction band electrons by the band gap excitation of a semiconductor photocatalyst. These charge carriers produce reactive hydroxyl and superoxide radicals, which mediate oxidation and reduction reactions. However, the oxidizing agents are decomposed by the incident radiation to generate reactive radicals, which accelerate the photo reaction. Today, photocatalysis and photo-oxidative reactions are widely being practiced for environmental pollution abatement, synthesis of fine chemicals, synthesis of polymers, generation of hydrogen as a clean energy carrier, and in anti-fogging and self-cleaning surface treatments. The present investigation focuses on elucidating the mechanism and kinetics of environmentally and synthetically relevant photo-initiated reactions for a better understanding of the fundamental aspects of the photo processes. The different photo-initiated reactions studied in this dissertation can be grouped under the broad categories of (i) photocatalytic degradation of organic compounds like dyes and phenols, and reduction of metal ions, (ii) photocatalytic degradation of polymers, (iii) selective photocatalytic oxidation of cyclohexane, (iv) sonophotocatalytic degradation of dyes, (v) photopolymerization, and (vi) sonophotooxidative degradation of polymers. Nano-sized TiO2, synthesized by solution combustion technique (henceforth denoted as CS TiO2), was used as the photocatalyst for most of the above reactions, except for the last two polymer reactions, where organic initiators were used. Invariably, the photocatalytic activity of CS TiO2 was compared with the commercially available Degussa P-25 TiO2 (DP25). Based on the experimental results, detailed mechanisms were proposed for the different reactions, kinetic models were derived, and the rate coefficients signifying the importance of the underlying reaction steps were evaluated. Pd2+ substituted and Pd0 impregnated TiO2 were synthesized by solution combustion and reduction techniques, respectively, and characterized by powder XRD, XPS, TEM, BET surface area, UV/visible, TGA, FT-IR and photoluminescence measurements. While the above catalysts are known to be more active compared to CS TiO2 for the gas phase NO reduction and NO decomposition reactions, it was found in this study, that these catalysts exhibit lower activity for the degradation of organic compounds like dyes, phenol and 4-chlorophenol, in the aqueous phase. The decrease in activity was correlated with a reduction in surface area and photoluminescence intensity of these catalysts, compared to CS TiO2. Ag+ substituted (Ag sub) and Ag0 impregnated (Ag imp) nano-TiO2 were synthesized by solution combustion and reduction techniques, respectively, and characterized by the above standard measurements. These catalysts were used for the photodegradation of dyes, and the selective photooxidation of cyclohexane to cyclohexanone. For the photocatalytic degradation of dyes, unsubstituted CS TiO2 exhibited the highest activity, followed by 1% Ag imp and 1% Ag sub. However, for the photooxidation of cyclohexane, the total conversion of cyclohexane and the selectivity of cyclohexanone followed the order: 1% Ag sub > DP-25 > CS TiO2 > 1% Ag imp. The kinetics of photodegradation of the dyes and the photooxidation of cyclohexane was modeled using Langmuir-Hinshelwood rate equation, and a free radical mechanism, respectively. This study proves that the photoactivity of a catalyst is not solely determined by a single physical property, but rather by a number of variables including the surface area, band gap, surface hydroxyl content, oxide ion vacancy and surface charge of the catalyst. The photocatalytic degradation of five anionic, eight cationic and three solvent dyes, containing different functional groups, was evaluated. The degradation of the dyes was quantified using the initial rate of decolorization and overall percent mineralization. The decolorization of the anionic dyes with CS TiO2 followed the order: Indigo Carmine > Eosin Y > Amido Black 10B > Alizarin Cyanine Green > Orange G. The decolorization of the cationic dyes with DP-25 followed the order: Malachite Green > Pyronin Y > Rhodamine 6G > Azure B > Nile Blue Sulfate > Auramine O ≈ Acriflavine ≈ Safranin O. CS TiO2 exhibited higher rates of decolorization and mineralization for all the anionic dyes, while DP-25 was better in terms of decolorization for most of the cationic dyes. The solvent dyes exhibited adsorption dependent decolorization. The observed results were rationalized based on the molecular structure and degradation pathway of the dyes. The simultaneous photocatalytic degradation of phenolic compounds like phenol and 4-nitrophenol, and the reduction of metal ions like copper (Cu2+) and chromium (Cr6+) were studied. It was found that the presence of phenol accelerated the reduction of Cu2+ to Cu+, and the presence of phenol and 4-nitrophenol accelerated the adsorption of Cr6+ onto CS TiO2. A detailed dual-cycle, multi-step reaction mechanism was proposed for the simultaneous degradation and reduction, and a model was developed using the network reduction technique. The kinetic rate constants in the model were evaluated for the systems studied. The simultaneous UV and ultrasound (US) degradation of anionic dyes was carried out in presence of CS TiO2. The rates of degradation and mineralization of the dyes were higher for the sonophotocatalytic process compared to the individual photo-and sonocatalytic processes. The effect of dissolved gases and US intensity on the sonophotocatalytic degradation of the dyes was evaluated. A dual-pathway network mechanism of sonophotocatalytic degradation was proposed for the first time, and the rate equations were modeled using the network reduction technique. The kinetic rate coefficients of the individual steps were evaluated for all the systems by fitting the model with the experimental data. Eosin Y and Fluorescein dye sensitized visible light degradation of phenol, 4chlorophenol, 2,4-dichlorophenol and 2,4,6-trichlorophenol was studied. A detailed mechanism of sensitized degradation was proposed, and a mechanistic model for the rate of degradation of the phenolic compound was derived by using the pyramidal network reduction technique to evaluate the rate coefficients. An important conclusion of this study indicates that at low initial dye concentrations, the rate of degradation of the phenolic compound is first order in the concentration of the dye, while at high initial dye concentrations, the rate is first order in the concentration of the phenolic compound. The different phenolic and dye intermediates that were formed during degradation were identified by mass spectrometry, and a most probable pathway of degradation was proposed. The solution photopolymerization of methyl-, ethyl-, butyl-and hexylmethacrylates in presence of benzoyl peroxide as the initiator was studied. The effect of initiator and monomer concentrations on the time evolution of polymer concentration, number average molecular weight (Mn) and polydispersity (PDI) was examined. The reversible chain addition and β-scission, and primary radical termination steps were included in the mechanism along with the classical initiation, propagation and termination steps. The rate equations were derived using continuous distribution kinetics and solved numerically to fit the experimental data. The model predicted the instantaneous increase of Mn and PDI of the polymers to steady state values. The rate coefficients exhibited a linear increase with the size of the alkyl chain of the alkyl methacrylates. Poly(acrylamide-co-acrylic acid) copolymers of different compositions were synthesized and characterized. The copolymers were statistical with a relatively high percentage of acrylamide units, as determined by 13C-NMR. The aqueous phase photolytic and photocatalytic degradation of the copolymers and the homopolymers was conducted. The degradation was modeled using continuous distribution kinetics. The degradation followed a two step mechanism, wherein the rapid first step comprised of the scission of weak acrylic acid units along the chain, which was followed by the breakage of the relatively strong acrylamide units. The rate constants for the weak and strong links followed a linear trend with the percentage of acrylic acid and acrylamide in the copolymer, respectively. The photocatalytic degradation of the copolymers of methyl methacrylate with butyl methacrylate (MMA-BMA), ethyl acrylate (MMA-EA) and methacrylic acid (MMA-MAA) was carried out in toluene. The copolymers and the corresponding homopolymers degraded randomly along the chain. The degradation rate coefficient was determined using continuous distribution kinetics. The time evolution of the hydroxyl and hydroperoxide stretching vibration in the FT-IR spectra of the copolymers indicated that the degradation rate follows the order: MMA-MAA > MMA-EA > MMA-BMA. The photodegradation rate coefficients were compared with the activation energy of pyrolytic degradation. The observed contrast in the order of thermal stability compared to the photostability of these copolymers was attributed to the two different mechanisms governing the scission of the polymers and the evolution of the products. The mechano-chemical degradation of poly(methyl methacrylate), poly(ethyl methacrylate) and poly(n-butyl methacrylate) using US and UV radiation, in presence of benzoin as the photoinitiator, was carried out. A degradation mechanism that included the decomposition of the initiator, generation of polymer radicals by hydrogen abstraction of the initiator radicals, and reversible chain transfer between the stable polymer and the polymer radicals, was proposed. The mechanism assumed mid-point chain scission due to US and random chain scission due to UV radiation. The steady state evolution of PDI was successfully predicted by the continuous distribution kinetics model. The rate coefficients of polymer scission due to US and UV radiation exhibited a linear increase and decrease with the size of the alkyl group of the poly(alkyl methacrylate)s, respectively.