Este trabalho apresentada um estudo experimental do fenômeno de biestabilidade que ocorre na geometria simplificada de dois tubos dispostos lado a lado submetidos a um escoamento cruzado turbulento. Na análise consideram-se a condição de tubos fixos e com um grau de liberdade (rotacional), submetidos a diferentes números de Reynolds. A técnica experimental consiste na medição de flutuações de velocidade do escoamento através da anemometria de fio quente em canal aerodinâmico, na avaliação dos esforços do escoamento sobre os tubos com o uso de uma célula de carga e na visualização dos efeitos do fenômeno biestável sobre os tubos livres para rotacionar. Os dados obtidos da medição no canal são tratados com o uso de ferramentas estatísticas, espectrais e de ondaletas. Os resultados das visualizações do escoamento são apresentados através de imagens obtidas das filmagens realizadas com uma câmera digital. A investigação experimental consiste de ensaios de cilindros rígidos elasticamente montados e pivotados na base e posteriormente liberados para oscilar e/ou rotacionar em um eixo central aos dois tubos, submetidos ao escoamento perpendicular permanente de ar no canal Nos resultados experimentais observam-se a presença da biestabilidade e nota-se o comportamento não simultâneo deste fenômeno ao longo dos cilindros. A formação assimétrica das esteiras também é estudada e atribuída à interação entre os vórtices das esteiras, já que, inicialmente, o desprendimento dos vórtices atrás dos cilindros é simétrico. Na avaliação dos esforços por extensiometria, as etapas de condicionamento e aquisição do sinal foram elaboradas e os resultados de deformação mecânica apresentaram similaridade com o fenômeno observado na anemometria experimental. Para um número de Reynolds de 27635 encontrou-se uma força de 26,1 mN com um torque desenvolvido na célula de carga de 84,95Nmm. A técnica de visualização do fenômeno empregada corrobora a interpretação dos resultados obtidos através da técnica de anemometria de fio quente e extensiometria em canal aerodinâmico. / This paper presents an experimental study of the bistability phenomenon that occurs in the simplified geometry of two tubes arranged side by side submitted to a turbulent cross flow. In the analysis we consider the condition of fixed tubes and with a degree of freedom (rotational), submitted to different Reynolds numbers. The experimental technique consists in the measurement of velocity fluctuations through the aerodynamic channel with the hot wire anemometry technique, the evaluation of the stresses of the flow on the tubes with the use of a load cell and the visualization of the effects of the bistable phenomenon on the tubes free to rotate. The data obtained from the measurement in the channel are treated with the use of statistical, spectral and wavelet tools. The results of the flow visualizations are presented through images obtained with a high speed digital camera. The experimental investigation consists of tests of rigid cylinders mounted elastically and pivoted at the base and later released to oscillate and / or to rotate in a central axis to the two tubes, submitted to the flow of air in the channel In the experimental results we observe the presence of bistability and note the non-simultaneous behavior of the phenomenon along the cylinders. The asymmetric formation of the wakes is also studied and attributed to the interaction between the vortices from wakes behind the cylinders, since, initially, the wake detachments is symmetrical. In the evaluation of the forces by means of the extensiometry technique, the steps of conditioning and acquisition of the signal were elaborated and the results of mechanical deformation presented similarity with the phenomenon observed in the experimental anemometry. For a Reynolds number of 27635 a force of 26.1 mN was found with a torque developed in the load cell of 84.95 Nmm. The technique used for the visualization of the phenomenon corroborates the interpretation of the results obtained through hot wire anemometry and extensiometry in aerodynamic channel.

Este trabalho apresenta um estudo experimental do efeito da razão de bloqueio em um canal aerodinâmico no Número de Strouhal e o fenômeno da biestabilidade. É estudado o escoamento turbulento sobre um cilindro e também sobre dois cilindros dispostos lado a lado, onde fez-se uso de cilindros de vários diâmetros a fim de variar a razão de bloqueio no canal. Dois tipos de espaçamento entre os tubos são estudados. A técnica experimental consiste na medição de flutuações de velocidades em um canal aerodinâmico utilizando a técnica de anemometria de fio quente. Os dados obtidos da medição no canal aerodinâmico são tratados com o uso de ferramentas estatísticas, espectrais e de ondaletas. Para um cilindro, os resultados confirmam o aumento do número de Strouhal com o aumento da razão de bloqueio, na faixa do número de Reynolds utilizada. Razões de bloqueio mais baixas podem acarretar diminuição do número de Strouhal, também em função do número de Reynolds. Os resultados confirmam a existência do fenômeno da biestabilidade no escoamento sobre dois cilindros dispostos lado a lado, assim como a influência da razão de bloqueio sobre o fenômeno, sendo mais predominante em um dos espaçamentos estudados. Para razões de bloqueio altas, o fenômeno da biestabilidade pode não ocorrer ou pouco ocorre. Para razões de bloqueio mais baixas podemos ter também a não ocorrência do fenômeno em função das dimensões dos tubos serem mais reduzidas, fazendo com que a captação do fenômeno também seja reduzida. / This paper presents an experimental study of the effect of blockage ratio in a aerodynamic channel on Strouhal number and the bistability phenomenon. It studied the turbulent flow around a single cylinder and also on two cylinders arranged side-by-side, where use has been made of cylinders of various diameters to vary the blockage ratio of the channel. Two types of pitch to diameter ratio are studied. The experimental technique consists of measuring velocity fluctuations in aerodynamic channel using the technique of hot-wire anemometry. The data obtained from measuring the aerodynamic channel are treated with the use of statistical tools, spectral and wavelet analysis. For a single cylinder, the results confirm the increase of the Strouhal number with increasing blockage ratio in the range of Reynolds number used. Lower blockage ratio can cause a decrease of the Strouhal number, also a function of Reynolds number. The results confirm the existence of the bistability phenomenon in the flow on two cylinders arranged side-by-side, as well as the influence of blockage ratio on the phenomenon, being more predominant in one of the row spacings. For higher blockage ratios, the bistability phenomenon may not occur or occurs shortly. For lower blockage ratio, due to the smaller dimensions of the tubes the phenomenon may not occur on the capture of the phenomenon is also reduced with the present experimental technique.

Orientador: Edson Del Rio Vieira / Banca: Sérgio Said Mansur / Banca: Marcello Augusto F. de Medeiros / Resumo: Anemômetros de fio quente são sensíveis instrumentos capazes de medir variações de velocidade nos mais diversos tipos de escoamentos, sejam eles gasosos ou líquidos. Um delicado filamento metálico é aquecido por uma corrente elétrica a qual gera calor por efeito Joule e transfere parte dessa energia para o escoamento incidente, sendo esta troca de calor proporcional a velocidade do fluído, definindo assim o princípio básico de funcionamento da anemometria de fio quente. Quando este filamento é montado num circuito tipo ponte de Wheatstone, pode-se relacionar a troca de calor no filamento através da variação de sua resistência elétrica fazendo o uso de circuitos eletrônicos especiais. Este trabalho aborda os conceitos básicos da anemometria de fio quente, seus circuitos de controle principais e seus modos de operação, mostrando diferentes métodos para calibração de sondas de fio quente em escoamentos gasosos, além de apresentar uma metodologia completa para construção de um sistema básico de anemômetro de fio quente de temperatura constante. Dois dispositivos foram construídos e testados sendo avaliados quanto ao seu funcionamento e sua resposta em freqüência. / Abstract: Hot wire anemometers are sensitive instruments capable of measuring fluctuation of speed in many fluid flows, gaseous or liquid. A delicate metallic filament is heated by an electric current (Joule effect) and cooled by incident flow, this heat exchange is proportional of the fluid speed, defining the basic phenomenon of hot-wire anemometry. When this filament is mounted on an arm of Wheatstone bridge, the heat lost by the filament can be related its electric resistance when special electronic circuits are used. This work presents the concepts of hot-wire anemometry, its main control circuits and its operation mode, showing the basic methods for hot wire calibration with gaseous flows, besides presenting a complete methodology for construction of a basic constant temperature hot-wire anemometer system, based on the tests of two experimental circuits which are evaluated by electronic tests and its frequency response. / Mestre

Este trabalho apresenta um estudo acerca dos principais parâmetros que caracterizam o fenômeno da biestabilidade em dois tubos dispostos lado a lado submetidos a escoamento cruzado turbulento. A técnica experimental da anemometria de fio quente em canal aerodinâmico é aplicada na medição das flutuações de velocidade do escoamento após os tubos. As séries temporais obtidas são utilizadas como dados de entrada para determinação das funções densidade de probabilidade (PDF) usando um modelo de mistura finita, de acordo com uma função t de Student assimétrica e com o auxílio do método de Monte Carlo. Transformadas de ondaletas discretas e contínuas são aplicadas na filtragem das séries temporais para determinadas bandas de frequências e na análise do conteúdo de energia destes sinais. Através de conceitos de sistemas caóticos, é realizada a reconstrução do atrator do problema pelo método dos atrasos temporais, a partir das séries experimentais de velocidade, permitindo a determinação da dimensão de imersão e o cálculo do maior expoente de Lyapunov. Os resultados mostram a existência de dois patamares distintos de velocidade média nas séries temporais, correspondentes aos dois modos do escoamento, cada qual com números de Strouhal e funções densidade de probabilidade distintas. Uma análise conjunta das componentes axial e transversal do escoamento e suas PDF indicam as regiões no plano de medições onde o fenômeno se manifesta, sendo que reconstruções da trajetória filtrada das séries temporais para determinadas bandas de frequências apresentam características caóticodeterminísticas. O maior expoente de Lyapunov das séries experimentais é positivo, o que é um indício de comportamento caótico. / This work presents a study of the main parameters that characterize the phenomenon of bistability in two tubes placed side by side submitted to turbulent crossflow. The experimental technique of hot wire anemometry in aerodynamic channel is applied in the measurement of velocity fluctuations of the flow after the tubes. The time series obtained are used as input data for determining the probability density functions (PDF) using a finite mixture model, according to an asymmetric Student t function and with the aid of a Monte Carlo method. Wavelet transforms are applied in discrete and continuous filtering of time series for certain frequency bands and in the analysis of the energy content of these signals. By means of chaotic systems concepts, the attractor reconstruction of the problem is performed using the method of time delays from the experimental series of velocity, allowing the determination of the embedding dimension and calculating the largest Lyapunov exponent. The results show the existence of two different levels of mean velocity in time series, corresponding to two flow modes, each one with different Strouhal numbers and probability density functions. A joint analysis of axial and transverse components of flow and its PDF indicate the regions in the measurement plan where the phenomenon is manifested, and reconstructions of the trajectory of the filtered time series for certain frequency bands have chaotic-deterministic characteristics. The largest Lyapunov exponent of experimental series is positive, which is an indication of chaotic behavior.

Este trabalho apresentada um estudo experimental do fenômeno de biestabilidade que ocorre na geometria simplificada de dois tubos dispostos lado a lado submetidos a um escoamento cruzado turbulento. Na análise consideram-se a condição de tubos fixos e com um grau de liberdade (rotacional), submetidos a diferentes números de Reynolds. A técnica experimental consiste na medição de flutuações de velocidade do escoamento através da anemometria de fio quente em canal aerodinâmico, na avaliação dos esforços do escoamento sobre os tubos com o uso de uma célula de carga e na visualização dos efeitos do fenômeno biestável sobre os tubos livres para rotacionar. Os dados obtidos da medição no canal são tratados com o uso de ferramentas estatísticas, espectrais e de ondaletas. Os resultados das visualizações do escoamento são apresentados através de imagens obtidas das filmagens realizadas com uma câmera digital. A investigação experimental consiste de ensaios de cilindros rígidos elasticamente montados e pivotados na base e posteriormente liberados para oscilar e/ou rotacionar em um eixo central aos dois tubos, submetidos ao escoamento perpendicular permanente de ar no canal Nos resultados experimentais observam-se a presença da biestabilidade e nota-se o comportamento não simultâneo deste fenômeno ao longo dos cilindros. A formação assimétrica das esteiras também é estudada e atribuída à interação entre os vórtices das esteiras, já que, inicialmente, o desprendimento dos vórtices atrás dos cilindros é simétrico. Na avaliação dos esforços por extensiometria, as etapas de condicionamento e aquisição do sinal foram elaboradas e os resultados de deformação mecânica apresentaram similaridade com o fenômeno observado na anemometria experimental. Para um número de Reynolds de 27635 encontrou-se uma força de 26,1 mN com um torque desenvolvido na célula de carga de 84,95Nmm. A técnica de visualização do fenômeno empregada corrobora a interpretação dos resultados obtidos através da técnica de anemometria de fio quente e extensiometria em canal aerodinâmico. / This paper presents an experimental study of the bistability phenomenon that occurs in the simplified geometry of two tubes arranged side by side submitted to a turbulent cross flow. In the analysis we consider the condition of fixed tubes and with a degree of freedom (rotational), submitted to different Reynolds numbers. The experimental technique consists in the measurement of velocity fluctuations through the aerodynamic channel with the hot wire anemometry technique, the evaluation of the stresses of the flow on the tubes with the use of a load cell and the visualization of the effects of the bistable phenomenon on the tubes free to rotate. The data obtained from the measurement in the channel are treated with the use of statistical, spectral and wavelet tools. The results of the flow visualizations are presented through images obtained with a high speed digital camera. The experimental investigation consists of tests of rigid cylinders mounted elastically and pivoted at the base and later released to oscillate and / or to rotate in a central axis to the two tubes, submitted to the flow of air in the channel In the experimental results we observe the presence of bistability and note the non-simultaneous behavior of the phenomenon along the cylinders. The asymmetric formation of the wakes is also studied and attributed to the interaction between the vortices from wakes behind the cylinders, since, initially, the wake detachments is symmetrical. In the evaluation of the forces by means of the extensiometry technique, the steps of conditioning and acquisition of the signal were elaborated and the results of mechanical deformation presented similarity with the phenomenon observed in the experimental anemometry. For a Reynolds number of 27635 a force of 26.1 mN was found with a torque developed in the load cell of 84.95 Nmm. The technique used for the visualization of the phenomenon corroborates the interpretation of the results obtained through hot wire anemometry and extensiometry in aerodynamic channel.

Este trabalho apresenta um estudo experimental do efeito da razão de bloqueio em um canal aerodinâmico no Número de Strouhal e o fenômeno da biestabilidade. É estudado o escoamento turbulento sobre um cilindro e também sobre dois cilindros dispostos lado a lado, onde fez-se uso de cilindros de vários diâmetros a fim de variar a razão de bloqueio no canal. Dois tipos de espaçamento entre os tubos são estudados. A técnica experimental consiste na medição de flutuações de velocidades em um canal aerodinâmico utilizando a técnica de anemometria de fio quente. Os dados obtidos da medição no canal aerodinâmico são tratados com o uso de ferramentas estatísticas, espectrais e de ondaletas. Para um cilindro, os resultados confirmam o aumento do número de Strouhal com o aumento da razão de bloqueio, na faixa do número de Reynolds utilizada. Razões de bloqueio mais baixas podem acarretar diminuição do número de Strouhal, também em função do número de Reynolds. Os resultados confirmam a existência do fenômeno da biestabilidade no escoamento sobre dois cilindros dispostos lado a lado, assim como a influência da razão de bloqueio sobre o fenômeno, sendo mais predominante em um dos espaçamentos estudados. Para razões de bloqueio altas, o fenômeno da biestabilidade pode não ocorrer ou pouco ocorre. Para razões de bloqueio mais baixas podemos ter também a não ocorrência do fenômeno em função das dimensões dos tubos serem mais reduzidas, fazendo com que a captação do fenômeno também seja reduzida. / This paper presents an experimental study of the effect of blockage ratio in a aerodynamic channel on Strouhal number and the bistability phenomenon. It studied the turbulent flow around a single cylinder and also on two cylinders arranged side-by-side, where use has been made of cylinders of various diameters to vary the blockage ratio of the channel. Two types of pitch to diameter ratio are studied. The experimental technique consists of measuring velocity fluctuations in aerodynamic channel using the technique of hot-wire anemometry. The data obtained from measuring the aerodynamic channel are treated with the use of statistical tools, spectral and wavelet analysis. For a single cylinder, the results confirm the increase of the Strouhal number with increasing blockage ratio in the range of Reynolds number used. Lower blockage ratio can cause a decrease of the Strouhal number, also a function of Reynolds number. The results confirm the existence of the bistability phenomenon in the flow on two cylinders arranged side-by-side, as well as the influence of blockage ratio on the phenomenon, being more predominant in one of the row spacings. For higher blockage ratios, the bistability phenomenon may not occur or occurs shortly. For lower blockage ratio, due to the smaller dimensions of the tubes the phenomenon may not occur on the capture of the phenomenon is also reduced with the present experimental technique.

The increased fatigue loads and decreased power output of a wind turbine placed in the wake of another turbine is a well-known problem when building new wind power farms. In order to better estimate the total power output of a wind power farm, knowledge about the development and stability of wind turbine wakes is crucial. In the present thesis, the wake behind a small-scale model turbine was investigated experimentally in a wind tunnel. The velocity in the wake was measured with hot-wire anemometry, for different free stream velocities and tip speed ratios. To characterize the behaviour of the model turbine, the power output, thrust force and rotational frequency of the model were also measured. These results were then compared to calculations using the Blade Element Momentum (BEM) method. New turbine blades for the model was constructed using the same method, in order to get an estimate of the distribution of the lift and drag forces along the blades. This information is needed for comparisons with certain numerical simulations, which however remains to be performed.By placing the turbine at different heights in a turbulent boundary layer, the effects of forest turbulence on wind turbine outputs (power and thrust) could also be investigated.The evolution of the tip vortices shed from the turbine blades was studied by performing velocity measurements around the location of the tip vortex breakdown. The vortices' receptivity to disturbances was then studied by introducing a disturbance in the form of two pulsed jets, located in the rear part of the nacelle. In order to introduce a well-defined disturbance and perform phase-locked measurements, a new experimental setup was constructed and successfully tested for two different disturbance frequencies. The mean streamwise velocity and the streamwise turbulence intensity was found to scale well with the free stream velocity and the spreading of the wake was found to be proportional to the square root of the downstream distance.  The comparison for power and thrust between measurements and BEM calculations showed good agreement in some cases but worse agreement when the pitch angle of the blades was small.The velocity measurements showed that the tip vortices can be susceptible to disturbances and an earlier breakdown could be detected. However, more measurements need to be made to fully investigate the dependance on disturbance frequency and amplitude. / QC 20120504

This report documents the measurements of turbulence quantities resulting from vortices embedded in a zero pressure gradient turbulent boundary layer. Turbulent boundary layers are found in most flow regimes over large scale vehicles and have been studied for many years. Various systems to control separation of boundary layers have been proposed, but vortex generators have proven to be an economical choice as they are often used to fix deficiencies in a flow field after large scale production of a vehicle has commenced. In order to better understand the interaction between vortex generators and the boundary layer in which they are embedded, an experiment has been performed using through non-invasive Comprehensive Laser Doppler Velocimeter. The results show that normalization on edge velocity is appropriate for comparison with previous work. The 1/S parameter and vq^2 parameter were found to be most appropriate to correlate the Reynolds stresses and triple products, respectively. The higher inflow edge velocity and greater momentum thickness, creating a lower vortex generator to boundary layer height ratio, result in a more diffuse vortex as compared to previous work conducted in the same wind tunnel, with the same geometry, but with different inflow conditions. / Master of Science

On-blade hot wire anemometry measurements as well as far field sound measurements at several receiving angles have been previously made for a rotor partially embedded in a boundary layer. The inflow distortion effect on the rotor angle of attack distribution was determined directly from the on-blade measurements, and was found to minimally affect the angle of attack at the blade tips and lower the angle attack in the rotor disk plane as the radial location moves towards the hub. A narrow, sharp increase in angle of attack as the rotor blades approached the wall was also observed, indicating blade interaction with flow reversal. The haystacking pattern, or spectral humps that appear at multiples of the blade passage frequency, was studied for a wide range of advance ratios. At high advance ratios, evidence of vortex shedding from the blade trailing edges was observed. For low advance ratios, the haystacks narrowed, became more symmetric and increased in number. A method of determining the average acoustic signature of an eddy passage through a rotor was developed from time delay aligning multiple microphone signals and eddy passages detected using the continuous wavelet transform. It was found that the eddy passage signatures were similar to a cosine wave with a Gaussian window. It was also found that normalized timescales obtained directly from the eddy passage signatures remained somewhat constant with advance ratio, but increases slightly for fixed free stream velocities with increasing rotor RPM. For advance ratios less than 0.6, the eddy passage signatures were dominated by a tonal component due to rotor ingestion of misaligned flow caused by a boundary layer separation at the wall. This indicates that flow reversal known as the Pirouette Effect is interacting with the rotor blades. / Master of Science

The first part of this work focuses on control experiments performed on an unstable kerosene-fueled turbulent combustor. Using a phase shift controller and primary fuel modulation stability is successfully gained for a wide band of global equivalence ratios allowing the limitations of the control scheme to be characterized. It is shown that control signal saturation can significantly impact the ability of the control scheme to stabilize the system. Three different regions of controllability are defined based on the degree of saturation. A hysteresis behavior is also found to exist for the controller settings depending on whether stability is being maintained or realized for an unstable system. The second part of this work focuses on the impact that primary fuel modulation has on the fuel spray. Measurements for a simplex nozzle and an air-assist nozzle are taken under both static and dynamic operating conditions with a Phase Doppler Anemometry system. The dynamic modulation is found to significantly impact the spray properties of both nozzles. / Master of Science