abstract: A vast amount of energy emanates from the sun, and at the distance of Earth, approximately 172,500 TW reaches the atmosphere. Of that, 80,600 TW reaches the surface with 15,600 TW falling on land. Photosynthesis converts 156 TW in the form of biomass, which represents all food/fuel for the biosphere with about 20 TW of the total product used by humans. Additionally, our society uses approximately 20 more TW of energy from ancient photosynthetic products i.e. fossil fuels. In order to mitigate climate problems, the carbon dioxide must be removed from the human energy usage by replacement or recycling as an energy carrier. Proposals have been made to process biomass into biofuels; this work demonstrates that current efficiencies of natural photosynthesis are inadequate for this purpose, the effects of fossil fuel replacement with biofuels is ecologically irresponsible, and new technologies are required to operate at sufficient efficiencies to utilize artificial solar-to-fuels systems. Herein a hybrid bioderived self-assembling hydrogen-evolving nanoparticle consisting of photosystem I (PSI) and platinum nanoclusters is demonstrated to operate with an overall efficiency of 6%, which exceeds that of land plants by more than an order of magnitude. The system was limited by the rate of electron donation to photooxidized PSI. Further work investigated the interactions of natural donor acceptor pairs of cytochrome c6 and PSI for the thermophilic cyanobacteria Thermosynechococcus elogantus BP1 and the red alga Galderia sulphuraria. The cyanobacterial system is typified by collisional control while the algal system demonstrates a population of prebound PSI-cytochrome c6 complexes with faster electron transfer rates. Combining the stability of cyanobacterial PSI and kinetics of the algal PSI:cytochrome would result in more efficient solar-to-fuel conversion. A second priority is the replacement of platinum with chemically abundant catalysts. In this work, protein scaffolds are employed using host-guest strategies to increase the stability of proton reduction catalysts and enhance the turnover number without the oxygen sensitivity of hydrogenases. Finally, design of unnatural electron transfer proteins are explored and may introduce a bioorthogonal method of introducing alternative electron transfer pathways in vitro or in vivo in the case of engineered photosynthetic organisms. / Dissertation/Thesis / Doctoral Dissertation Biochemistry 2014

Photoinduced electron transfer in self-assembled via axial coordination porphyrin-fullerene dyads is investigated. Fullerene functionalized with imidazole and fullerenes functionalized with pyridine are chosen as electron acceptors, while zinc pophyrin derivatives are utilized as electron donors. The electron withdrawing ability of halogen atoms make the porphyrin ring electrophilic, which explained the binding of (F20TPP)Zn with fullerene derivatives having the highest binding constant around 105M-1. Another important observation is that the fullerene imidazole binding to zinc pophyrin had higher stability than fullerene pyridine-porphyrin dyad. Computational DFT B3LYP-21G(*) calculations are used to study the geometric and electronic structures. The HOMO and LUMO was found to be located on the porphyrin and fullerene entities, respectively. Photoinduced electron transfer is investigated by the steady-state absorption and emission, differential pulse voltammetry, and nanosecond and femtosecond transient absorption studies. The measurements provided the same conclusion that the increasing number of the halogen atoms on the porphyrin ring leads to the higher binding of porphyrin-fullerene supramolecular dyads and efficient charge separation and charge recombination processes.

Carbon dioxide is a viable resource, if used as a raw material for bioprocessing. It is abundant and can be collected as a byproduct from industrial processes. Globally, photosynthetic organisms utilize around 6’000 TW (terawatt) of solar energy to fix ca. 800 Gt (gigaton) of CO2 in the planets largest carbon-capture process. Photosynthesis combines light harvesting, charge separation, catalytic water splitting, generation of reduction equivalents (NADH), energy (ATP) production and CO2 fixation into one highly interconnected and regulated process. While this simplicity makes photosynthetic production of commodity interesting, yet photosynthesis suffers from low energy efficiency, which translates in an extensive footprint for solar biofuels production conditions that store < 2% of solar energy. Electron transfer processes form the core of photosynthesis. At moderate light intensity, the electron transport chains reach maximum transfer rates and only work when photons are at appropriate wavelengths, rendering the process susceptible to oxidative damage, which leads to photo-inhibition and loss of efficiency. Based on our fundamental analysis of the specialized tasks in photosynthesis, we aimed to optimize the efficiency of these processes separately, then combine them in an artificial photosynthesis (AP) process that surpasses the low efficiency of natural photosynthesis. Therefore, by combining photovoltaic light harvesting with electrolytic water splitting or CO2 reduction in combination with microbiological conversion of electrochemical products to higher valuable compounds, we developed an electro-microbial carbon capture and conversion setups that capture CO2 into the targeted bioplastic; polyhydroxybutyrate (PHB). Based on the type of the electrochemical products, and the microorganism that either (i) convert products formed by electrochemical reduction of CO2, e.g. formate (using inorganic cathodes), or (ii) use electrochemically produced H2 to reduce CO2 into higher compounds (autotrophy), three AP setups were designed: one-pot, two-pot, and three-pot setups. We evaluated the kinetic (microbial uptake and conversion, electrochemical reduction) and thermodynamics (efficiencies) of the separate processes, and the overall process efficiency of AP compared to photosynthesis. We address the influence of several parameters on efficiencies and time-space yields, e.g. salinity, pH, electrodes, media, partial pressures of H2 and CO2. These data provide a valuable basis to establish a highly efficient and continuous AP process in the future.

Mother nature has laid out a beautiful blueprint to capture sunlight and convert to usable form of energy. Inspired by nature, donor-acceptor systems are predominantly studied for their light harvesting applications. This dissertation explores new donor-acceptor systems by studying their photochemical properties useful in building artificial photosynthetic systems. The systems studied are divided into phthalocyanine-porphyrin-fullerene-based, perylenediimide-based, and aluminum porphyrin-based donor-acceptor systems. Further effect of solvents in determining the energy or electron transfer was studied in chapter 6. Such complex photosynthetic analogues are designed and characterized using UV-vis, fluorescence spectroscopy, differential pulse voltammetry and cyclic voltammetry. Using ultrafast transient absorption spectroscopy, the excited state properties are explored. The information obtained from the current study is critical in getting one step closer to building affordable and sustainable solar energy harvesting devices which could easily unravel the current energy demands.

京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第21074号 / 工博第4438号 / 新制||工||1690(附属図書館) / 京都大学大学院工学研究科分子工学専攻 / (主査)教授 田中 庸裕, 教授 梶 弘典, 教授 今堀 博 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DFAM

Multimodular designs of electron donor-acceptor systems are the ultimate strategy in fabricating antenna-reaction center mimics for artificial photosynthetic applications. The studied photosystems clearly demonstrated efficient energy transfer from the antenna system to the primary electron donor, and charge stabilization of the radical ion pair achieved with the utilization of secondary electron donors that permits either electron migration or hole transfer. Moreover, the molecular arrangement of the photoactive components also influences the route of energy and electron transfer as observed from the aluminum(III) porphyrin-based photosystems. Furthermore, modulation of the photophysical and electronic properties of these photoactive units were illustrated from the thio-aryl substitution of subphthalocyanines yielding red-shifted Q bands of the said chromophore; hence, regulating the rate of charge separation and recombination in the subphthalocyanine-fullerene conjugates. These multicomponent photosystems has the potential to absorb the entire UV-visible-NIR spectrum of the light energy allowing maximum light-harvesting capability. Furthermore, it permits charge stabilization of the radical ion pair enabling the utilization of the transferred electron/s to be used by water oxidizing and proton reducing catalysts in full-scale artificial photosynthetic apparatuses.

Converting solar energyto fuels such as hydrogen by the reaction of water splitting is a promising solution for the future sustainable energy systems. The theme of this thesis is to design water splitting devices via molecular engineering; it concerns the studies of both electrochemical-driven and photo-electrochemical driven molecular functional devices for water splitting. The first chapter presents a general introduction about Solar Fuel Conversion. It concerns molecular water splitting catalysts, light harvesting materials and fabrication methods of water splitting devices. The second chapter describes an electrode by immobilizing a molecular water oxidation catalyston carbon nanotubes through the hydrophobic interaction. This fabrication method is corresponding to the question: “How to employ catalysts in functional devices without affecting their performances?” In the third chapter, molecular water oxidation catalysts were successfully immobilized on glassy carbon electrode surface via electrochemical polymerization method. The O-O bond formation pathways of catalysts on electrode surfaces were studied. This kinetic studyis corresponding to the question: “How to get kinetic information of RDS whena catalyst is immobilized on the electrode surface?” Chapter four explores molecular water oxidation catalysts immobilized on dye-sensitized TiO2 electrodeand Fe2O3 semiconductor electrode via different fabrication methods. The reasons of photocurrent decay are discussed and two potential solutions are provided. These studies are corresponding to the question: “How to improvethe stability of photo-electrodes?” Finally, in the last chapter, two novel Pt-free Z-schemed molecular photo-electrochemical cells with both photoactive cathode and photoactive anode for visible light driven water splitting driven were demonstrated. These studies are corresponding to the question: “How to utilizethe concept of Z-schemein photosynthesis to fabricate Pt-free molecular based PEC cells? / <p>QC 20160129</p>

abstract: The molecular modification of semiconductors has applications in energy conversion and storage, including artificial photosynthesis. In nature, the active sites of enzymes are typically earth-abundant metal centers and the protein provides a unique three-dimensional environment for effecting catalytic transformations. Inspired by this biological architecture, a synthetic methodology using surface-grafted polymers with discrete chemical recognition sites for assembling human-engineered catalysts in three-dimensional environments is presented. The use of polymeric coatings to interface cobalt-containing catalysts with semiconductors for solar fuel production is introduced in Chapter 1. The following three chapters demonstrate the versatility of this modular approach to interface cobalt-containing catalysts with semiconductors for solar fuel production. The catalyst-containing coatings are characterized through a suite of spectroscopic techniques, including ellipsometry, grazing angle attenuated total reflection Fourier transform infrared spectroscopy (GATR-FTIR) and x-ray photoelectron (XP) spectroscopy. It is demonstrated that the polymeric interface can be varied to control the surface chemistry and photoelectrochemical response of gallium phosphide (GaP) (100) electrodes by using thin-film coatings comprising surface-immobilized pyridyl or imidazole ligands to coordinate cobaloximes, known catalysts for hydrogen evolution. The polymer grafting chemistry and subsequent cobaloxime attachment is applicable to both the (111)A and (111)B crystal face of the gallium phosphide (GaP) semiconductor, providing insights into the surface connectivity of the hard/soft matter interface and demonstrating the applicability of the UV-induced immobilization of vinyl monomers to a range of GaP crystal indices. Finally, thin-film polypyridine surface coatings provide a molecular interface to assemble cobalt porphyrin catalysts for hydrogen evolution onto GaP. In all constructs, photoelectrochemical measurements confirm the hybrid photocathode uses solar energy to power reductive fuel-forming transformations in aqueous solutions without the use of organic acids, sacrificial chemical reductants, or electrochemical forward biasing. / Dissertation/Thesis / Doctoral Dissertation Biochemistry 2018

La photosynthèse est un processus biologique naturel qui convertit l'énergie lumineuse en énergie chimique par l'action de centres réactionnels photosynthétiques. L'énergie convertie est stockée sous forme de produits de haute énergie synthétisés par la branche réductive du processus photosynthétique. Les électrons nécessaires à ces réactions sont fournis par des molécules d'eau lors de leur oxydation par le centre de dégagement de l'oxygène (Oxygen Evolving Complex: OEC) pour le système de photosynthèse II (PSII). La photosynthèse artificielle cherche à reproduire les réactions qui se produisent dans les organismes naturels afin de i) de mieux comprendre les processus chimiques qui se déroulent dans les systèmes naturels, et ii) de parvenir à exploiter l'énergie solaire pour le développement de carburants propres et renouvelables. Chaque étape qui survient dans le processus de photosynthèse naturelle, telle que la capture de lumière, le transfert d'énergie, le transfert d'électron, la séparation de charge, l'activation du catalyseur et la réaction catalytique doit se produire au sein du système artificiel. La photosynthèse artificielle cherche à reproduire les réactions qui se produisent dans les organismes naturels afin de i) de mieux comprendre les processus chimiques qui se déroulent dans les systèmes naturels, et ii) de parvenir à exploiter l'énergie solaire pour le développement de carburants propres et renouvelables. Chaque étape qui survient dans le processus de photosynthèse naturelle, telle que la capture de lumière, le transfert d'énergie, le transfert d'électron, la séparation de charge, l'activation du catalyseur et la réaction catalytique doit se produire au sein du système artificiel. Avec ces concepts en vue, nous avons conçu, synthétisé et caractérisé des molécules qui imitent les réactions réalisées par les antennes et les centres réactionnels présents dans le photosystème II. Ces molécules sont capables de reproduire la séparation de charges induite par la lumière, le transfert d'électrons et l'accumulation d'équivalents oxydo-réducteurs observés pendant la photosynthèse naturelle. Les antennes artificielles se constituent de caroténoïdes et phthalocyanines. Ces molécules présentent des profiles d'absorption large avec des coefficients d'extinction élevés, et sont capables de supporter des transferts d'énergie ultra rapides qui permettent l'état de séparation de charges. En faisant varier la longueur de la chaine conjuguée des caroténoïdes de neuf à onze liaisons doubles, nous avons pu mettre en évidence comment ces molécules peuvent agir aussi bien comme donneurs que comme agents dissipateurs d'énergie, effet caractéristique qui s'apparente au processus de trempe non-photochimique (Non Photochemical Quenching: NPQ) qui se produit dans le cycle de la zéaxanthine. Les mimiques des agents donneurs du photosystème II ont aussi été étudiées. Ces systèmes supramoléculaires contiennent une partie photoactive liée de façon covalente par un intermédiaire à une cavité contenant un ion ou un agrégat d'ions métalliques. La photosensibilisateur utilisé est un complexe du ruthénium [Ru(bipy)3]2+ (bpy = 2,20-bipyridine), homologue du P680, qui absorbe la lumière dans le spectre visible et déclenche le transfert d'électron. Les espèces RuIII résultantes ont un potentiel d'oxydation réversible de 1.3 V vs SCE, comparables à celui de P680 (1.25 V vs NHE) et présentent donc la possibilité d'oxyder à la fois un complexe manganèse ainsi qu'une source d'électron. Concernant les molécules imitant le coté donneur du PSII, nous avons synthétisé des paires ruthénium-phénol, ainsi que des systèmes ruthénium-manganèse bimétalliques. Parmi ces dernières, nous avons étudié celles présentant des cavités de coordination constituées de terpyridines, vu qu'il a déjà été montré que les dimères Mn-di-μ-oxo-Mn de ce type peuvent catalyser l'oxydation de l'eau en oxygène moléculaire. Des salènes et salophènes ont aussi été examinés étant donné que de tels groupes peuvent accomplir l'oxydation à deux électrons de substrats organique. Dans la littérature, ces réactions sont toutes conduites par l'action d'oxydants chimiques externes, tandis que nous avons pour but d'utiliser des espèces oxydantes induites par l'action de la lumière.

<p>In the society of today the need for alternative energy sources is increasing. The construction of artificial devices for the conversion of sunlight into electricity or fuel seems very attractive from an environmental point of view, since these devices are based on processes that does not necessarily generate any harmful biproducts. In the oxygen evolving photosynthetic process highly efficient energy and electron transfer reactions are responsible for the conversion of the sunlight into chemically stored energy and if the same principles can be used in an artificial device, the only electron supply required, is water. </p><p> This thesis describes energy and electron transfer reactions in supramolecular complexes where the reactions are intended to mimic the basic steps in the photosynthetic process. All complexes are based on ruthenium(II)-trisbipyridine as photosensitizer, that is covalently linked to electron donors or electron or energy acceptors. The photochemical reactions were studied with time resolved transient absorption and emission measurements. In the complexes that mimic the donor side of Photosystem II, where a manganese cluster together with tyrosine catalyses the oxidation of water, intramolecular electron transfer was found to occur from Mn(II) or tyrosine to photo-oxidized Ru(III). Studies of a series of Ru(II)-Mn(II) complexes gave information of the quenching of the Ru(II) excited state by the coordinated Mn(II), which is important for the development of multi-nuclear Ru(II)-Mn complexes. In the supramolecular triad, PTZ-Ru²⁺-Q, the charge separated state, PTZ^+●-Ru²⁺-Q^-●, was rapidly formed, and further development where a second electron acceptor is linked to quinone is planned. Ultra fast energy transfer τ<200 fs), was obtained between ruthenium(II) and osmium(II) in a small artificial antenna fragment. Fast and efficient energy transfer is important in larger antennas or photonic wires where a rapid energy transfer is desired over a large distance.</p>