The theme of this thesis is the development of mononuclear Ru-based complexes that are capable of catalyzing the water oxidation (or O2-evolving) reaction, e.g. 2 H2O → O2 + 4 H+ + 4 e−. Several families of mononuclear Ru water oxidation catalysts were designed and prepared. They feature with anionic ancillary ligands that contain carboxylate or phenolate donors. The properties of the catalysts were investigated in various aspects including coordination geometry, electrochemical behavior, and ligand exchange. All catalysts showed outstanding catalytic activity towards water oxidation in the presence of cerium(IV) ammonium nitrate as a sacrificial oxidant. High-valent Ru intermediates involved in the reactions were characterized both experimentally and theoretically. The kinetics of catalytic water oxidation was examined based on one catalyst and a prevailing catalytic pathway was proposed. The catalytic cycle involved a sequence of oxidation steps from RuII−OH2 to RuV=O species and O−O bond formation via water-nucleophilic-attack to the RuV=O intermediate. By comparing properties and catalytic performance of Ru catalysts herein with that of previously reported examples, the effect of anionic ancillary ligands was clearly elucidated in the context of catalytic water oxidation. Aiming to further application in an envisaged artificial photosynthesis device, visible light-driven water oxidation was conducted and achieved primarily in a homogeneous three-component system containing catalyst, photosensitizer, and sacrificial electron acceptor. Moreover, one model Ru catalyst was successfully immobilized on ordinary glass carbon surface through a facile and widely applicable method. / <p>QC 20121112</p>

Artificial systems involving water oxidation and solar cells are promising ways for the conversion of solar energy into fuels and electricity. These systems usually consist of a photosensitizer, an electron donor and / or an electron acceptor. This thesis deals with the synthesis and photoinduced electron transfer of several donor-sensitizer-acceptor supramolecular systems. The first part of this thesis describes the synthesis and properties of two novel dinuclear ruthenium complexes as electron donors to mimic the donor side reaction of Photosystem II. These two Ru2 complexes were then covalently linked to ruthenium trisbipyridine and the properties of the resulting trinuclear complexes were studied by cyclic voltammetry and transient absorption spectroscopy. The second part presents the synthesis and photoinduced electron transfer of covalently linked donor-sensitizer supramolecular systems in the presence of TiO2 as electron acceptors. Electron donors are tyrosine, phenol and their derivatives, and dinuclear ruthenium complexes. Intramolecular electron transfer from the donor to the oxidized sensitizer was observed by transient absorption spectroscopy after light excitation of the Ru(bpy)32+ moiety. The potential applications of Ru2-based electron donors in artificial systems for water oxidation and solar cells are discussed. In the final part, the photoinduced interfacial electron transfer in the systems based on carotenoids and TiO2 is studied. Carotenoids are shown to act as both sensitizers and electron donors, which could be used in artificial systems to mimic the electron transfer chain in natural photosynthesis.

The objective of this thesis is to investigate the photocatalytic activity in nanosized TiO2 structures. Two different structures were used for two different reaction systems. In the first part of the study, TiO2 coated on glass beads by a sol-gel procedure were used to test the photocatalytic CO2 reduction reaction with H2O and H2 in the gas phase. The results of photocatalytic CO2 reduction reaction revealed that CO2 reduction step of the overall reaction proceeds in dark / while illumination is required for water splitting reaction. In the second part of the study, Photocatalytic oxidation activity of the commercial TiO2 powders mixed with grout and plaster were studied for a potential commercial self cleaning material. A method based on gas phase benzene oxidation was developed for testing TiO2 added cement based self cleaning surfaces. This method was used to screen 15 commercial TiO2 samples with and without cement. Based on this method a commercial TiO2 sample (S9) was selected for further use. Surface of 15 commercial TiO2 samples were characterized by using NO and CO2 as probe molecules. Photocatalytic benzene oxidation experiments showed that using TiO2 on the surface lead to more effective surfaces in terms of photocatalytic activity. TiO2 was bound to surface by inorganic materials without much activity loss. This kind of amount optimization is of commercial importance.

A detailed understanding of natural photosynthesis provides inspiration for the development of sustainable and renewable energy sources, i.e. a technology that is capable of converting solar energy directly into chemical fuels. This concept is called artificial photosynthesis. The work described in this thesis contains contributions to the development of artificial photosynthesis in two separate areas. The first one relates to light harvesting with a focus on the question of how electronic properties of photosensitizers can be tuned to allow for efficient photo-induced electron transfer processes. The study is based on a series of bis(tridentate)ruthenium(II) polypyridyl complexes, the geometric properties of which make them highly appealing for the construction of linear donor-photosensitizer-acceptor arrangements for efficient vectorial photo-induced electron transfer reactions. The chromophores possess remarkably long lived 3MLCT excited states and it is shown that their excited-state oxidation strength can be altered by variations of the ligand scaffold over a remarkably large range of 900 mV. The second area of relevance to natural and artificial photosynthesis that is discussed in this thesis relates to the coupled movement of protons and electrons. The delicate interplay between these two charged particles regulates thermodynamic and kinetic aspects in many key elementary steps of natural photosynthesis, and further studies are needed to fully understand this concept. The studies are based on redox active phenols with intramolecular hydrogen bonds to quinolines. The compounds thus bear a strong resemblance to the tyrosine/histidine couple in photosystem II, i.e. the water-plastoquinone oxidoreductase enzyme in photosynthesis. The design of the biomimetic models is such that the distance between the proton donor and acceptor is varied, enabling studies on the effect the proton transfer distance has on the rate of proton-coupled electron transfer reactions. The results of the studies have implications for the development of artificial photosynthesis, in particular in connection with redox leveling, charge accumulation, as well as electron and proton transfer. In addition to these two contributions, the excited-state dynamics of the intramolecular hydrogen-bonded phenols was investigated, thereby revealing design principles for technological applications based on excited-state intramolecular proton transfer and photoinduced tautomerization.

The aim of this study is to test the limits of photocatalytic reduction of CO2 over Pt and light harvesting dye promoted TiO2 films under UV and visible light. Thick and thin TiO2 film catalysts are coated onto 1 cm long glass beads via a common sol-gel procedure and dip coating technique. TiO2 thin films were promoted by Pt and three different light harvesting molecules: RuBpy (Tris (2,2&rsquo / &ndash / bipyridyl) ruthenium (II) chloride hexahydrate) , BrGly (1,7-dibromo-N,N&rsquo / -(t-butoxycarbonyl-methyl)-3,4:9,10-perylene-diimide) and BrAsp (1,7-dibromo-N,N&rsquo / -(S-(1-t-butoxy-carbonyl-2-t-butoxycarbonyl-methyl)-ethyl)- 3,4:9,10-perylenediimide). Their SEM, XRD, UV-Vis spectroscopy and hydrogen chemisorption characterizations are performed. Reaction tests are performed for the catalysts under UV and visible light. The only quantifiable reaction product was methane. With RuBpy containing catalysts hydrogen production was observed under UV light, but not quantified. The results indicated that Pt addition resulted in higher yields in UV experiments. The presence of light harvesting molecules resulted in increase in photocatalytic activity for thin films, whereas it resulted in no change or decrease for the thick films. The latter case may occur due to the UV filtering effect of these dyes. Use of dyes (with visible range absorption bands) as promoters made visible light excitation possible. This resulted in photocatalytic activity under visible light, which was not observed with unpromoted and Pt promoted TiO2 thin film catalysts. Under visible light methane was the only quantified photoreduction product. CO evolution was also observed, but not quantified. The photocatalytic activities of the dye promoted TiO2 were in the order of RuBpy~BrAsp&gt / BrGly. The methane yields of visible light experiments were one order of magnitude lower than the ones under UV light.

Par une approche supramoléculaire, des architectures radiales hétéro-poly-métalliques ont été réalisées pour des applications en photosynthèse artificielle et en magnétisme moléculaire. Dans une première partie, la synthèse et la caractérisation (spectroscopie UV-vis, émission, électrochimique, DRX) de complexes de ruthénium(II), possédant une gamme de ligands polypyridines, ont été réalisées. Les calculs théoriques ont été effectués afin de soutenir l’interprétation des propriétés photophysiques. Ces complexes, présentant un certain nombre de pyridines externes, ont servi de cœur à des architectures à base de rhénium tris-carbonyles (pour les effets d’antenne), et de cobaloximes (pour les propriétés catalytiques). Les nucléarités obtenues varient de 2 à 7 selon le cœur utilisé. Ces systèmes ont été engagés dans des cycles de photo-production de dihydrogène, démontrant une meilleure efficacité que la référence du domaine, le [Ru(bpy)3]2+. La seconde partie concerne l’étude de couples de métaux de transition, construits à partir de briques polycyanométallates, ou de lanthanides pontés par des ligands oxamides. Ces approches « complexes comme ligand » puis « assemblages comme ligand » permettent d’obtenir des systèmes de haute nucléarité, présentant des propriétés de molécule-aimant ou des effets magnéto-caloriques (à base de CrNi, GdCu, DyCu). Des propriétés photomagnétiques ont été observées sur les couples RuCu et MoCu, pouvant servir de commutateurs moléculaires dans des systèmes complexes. Enfin, une structure hétéro-tétra-métallique trifonctionnelle a été obtenue contenant à la fois un commutateur MoCu, une entité molécule-aimant CuTb et un complexe de ruthénium. / By a supramolecular strategy, radial hetero-poly-metallic architectures were obtained for applications in artificial photosynthesis and molecular magnetism. The first part is devoted to the synthesis, as well as the photophysical characterization (UV-vis absorption, emission, electrochemistry, X-ray diffraction) of ruthenium(II) complexes bearing a wide range of polypyridine ligands. Theoretical calculations were performed to support the interpretation of the photophysical properties. Through their pendant pyridine moieties, these complexes were used as core of architectures, bearing rhenium tris-carbonyl (for antenna effects), and cobaloximes (for catalytic properties) complexes. The nuclearities obtained vary from two to seven according to the core involved. These systems were engaged in photo-production of hydrogen, demonstrating more efficient systems than the reference in the field, the archetypal [Ru(bpy)3]2+. The second part concerns the study of transition metal couples, built on polycyanometallate cores, or oxamide-bridged lanthanide-based assemblies. These “complex as ligand” and “assemblies as ligand” approaches allow us to obtain high nuclearity systems on which we seek single molecule magnet (SMM) properties or good magnetocaloric effect (based on CrNi, GdCu, DyCu). Photo-magnetic properties have been studied on the RuCu and MoCu couples, which can serve as molecular switches in complex systems. Finally, a tri-functional hetero-tetra-metallic architecture was obtained containing a MoCu switch, a CuTb SMM entity, and a ruthenium complex.

<p>Climate change and the energy crisis are substantial challenges facing the human species, and they are projected to threaten life on our planet. For millions of years, the sun has been the main source of energy for life on Earth; this inspires ongoing research efforts focusing on a “sunlight to fuel” energy solution. Photosynthesis is nature’s tool to derive energy from the sun. Hence, scientists focus on the biochemistry of this phenomenon to employ photosynthesis in a man-made device. Such a device is able to convert solar energy to chemical energy through a light-driven cycle of the chemical reactions which produce hydrogen gas, later used as fuel. This process, often called “artificial photosynthesis,” needs efficient catalysts which can be incorporated into a molecular assembly and other microscopic structures or immobilized on an electrode surface. </p><p>Additionally, evolution, in the course of billions of years, chose manganese as an abundant and effective metal to facilitate the process of photosynthesis. These manganese atoms formed a cluster and an optimized ligand field to maximize efficiency. The photochemistry and photo-physics process behind photosynthesis is yet to be fully understood and implemented in a man-made apparatus with comparable efficiency and durability. </p><p>Photosynthesis requires a source of electrons. Water is an abundant molecule on earth that can provide the electrons needed for the photosynthesis. Although water is ubiquitous, it is one of the most stable molecules; hence, splitting it demands a well-designed system with strong oxidizing capability. Because a single atom of oxygen is highly reactive, there should be at least four oxidation states in the system to remove four electrons and release molecular oxygen: O2. The O-O bond formation is one of the most important steps in photosynthesis to fully understand. Lacking a thorough knowledge of this step prevents design and fabrication of robust and active water oxidizing catalysts. To fully understand O-O formation, one should perform a comprehensive study of each of the intermediates of the system. In other words, we need an understanding of the structure and electronic configuration of the system (natural or artificial) from the moment that a water molecule attaches to the catalyst (usually a metal core, central in the complex), until the moment that oxygen released as an O2 molecule. </p><p>There are multiple possible mechanisms to explain O-O formation. Two mechanisms that were extensively studied in this thesis are water nucleophilic attack and radical coupling. The prevailing view about oxygen formation in the catalysts that we study here explains the O-O bond formation by nucleophilic attack of a water molecule to a highly oxidized ruthenium (RuV=O) species. In this hypothesis, all polypyridine ligands that are coordinated to ruthenium remain neutral during the water oxidation process, while the formation of RuV=O (the key intermediate) would require a relatively high free energy (about 1.8 to 2 eV); use of computational (numerical) calculations determine this to be thermodynamically inaccessible. Furthermore, the failure of spectroscopic techniques to confirm the presence of RuV=O calls the validity of this model into question.)</p><p>Alternatively, radical coupling hypothesis considers another pathway to oxygen bond formation. Here, one of the nitrogen atoms coordinated to ruthenium in polypyridine plays a crucial role. We hypothesize that after formation of RuIV=O (which is spectroscopically observed), one nitrogen decoordinates from the metallic core (ruthenium) and oxidizes to form Ru-ON species. This N-oxide ligand can be further oxidized to form a ligand cation radical. It has been shown that [ligand-NO]+• can have almost no energy barrier for O-O bond formation via spin alignment. The study of the role of N-oxide is one of the main focuses of this work. Since this hypothesis does not require RuV=O nor water nucleophilic attack, it explains the process of water oxidation and opens further avenues for the design of future catalysts.</p><p>To confirm our hypothesis, I employed several spectroscopic methods and computational calculations. This new pathway predicts new intermediates exclusive to this model. Our objective is to prove their presence by in situ spectroscopy and test the possibility of formation of each intermediate computationally, to see if their formation is thermodynamically feasible. </p><div><br></div>

Développer de nouvelles sources d’énergie respectueuses de l’environnement est un des enjeux majeur de nos sociétés développées. Pour espérer la pérennité de notre espèce sur cette planète, il est indispensable de développer les sources d'énergie renouvelable ; permettant de nous affranchir de la dépendance aux énergies fossiles polluantes et dont les stocks s’épuisent. Il appartient aux scientifiques d’apporter leurs contributions à cet important défi que l’on appelle la transition énergétique et pour ça d’aider à développer une énergie idéale qui ne produirait pas de déchet polluant, serait très efficace et largement disponible. L'énergie solaire représente un excellent candidat car elle est de loin la plus abondante et prometteuse source d’énergie propre. D'importants efforts sont donc menés pour développer les technologies solaires, notamment la photosynthèse artificielle.La photosynthèse artificielle a vu le jour il y a une centaine d’années et fait l’objet de beaucoup d’intérêt et de recherche. Cette technologie cherche à imiter la photosynthèse naturelle réalisée par les plantes; et cela afin de stocker l’énergie provenant du Soleil dans des composés utilisables par l’Homme. La photosynthèse artificielle consiste en l’élaboration de systèmes synthétiques capables sous impulsion lumineuse de réaliser la décomposition de l’eau de manière catalytique, pour générer du dihydrogène ou des produits issus de la réduction du CO2, que l’on appelle combustibles solaires car à haut potentiel énergétique. En effet, la photosynthèse débute par la photo-catalyse de l’oxydation de l’eau, qui permet d’extirper les électrons et les protons des molécules d’eau. Ce sont ces électrons et protons qui seront utilisés par un catalyseur pour produire les combustibles solaires.Depuis peu, une véritable volonté de comprendre les mécanismes qui ont lieu lors de ces réactions catalysées semble apparaitre. Ces réactions mettent en jeu des transferts électroniques multiples photo-induits et cela rend leur étude assez compliquée. Grâce à des avancées technologiques importantes, nous avons étudié de manière plus approfondies plusieurs systèmes photo-catalytiques afin d’en tirer des savoirs permettant de rationaliser le design et d’améliorer les capacités des futurs systèmes développés. Ces avancées techniques ont été possibles grâce à des collaborations interdisciplinaires entre des chimistes et des physiciens et ont permis de développer un montage d’absorption transitoire « double-pump» afin de caractériser les espèces transitoires formées et de retracer les mécanismes lors de deux transferts électroniques photo-induits successifs.Dans la seconde partie de ce travail, de nouveaux catalyseurs ont été développé pour la réaction de photo-catalyse de l’oxydation de l’eau. La majorité des études menées jusqu’ici sur le sujet ont porté sur des systèmes moléculaires, mais le manque de robustesse et de réutilisabilité des catalyseurs homogènes a poussé la recherche vers le domaine des matériaux. Ainsi depuis une quarantaine d’années des systèmes photo-catalytiques hétérogènes ont été développé. Nous avons explorés deux types de matériaux, des nanoparticules catalyseurs dans des systèmes photo-catalytiques, et des polymères qui à eux seuls sont capables de réaliser l’ensemble des fonctions nécessaires à la photo-catalyse d’une réaction telle que l’oxydation de l’eau sous irradiation de lumière visible.Ainsi au cours de cette thèse nous avons tenté par deux approches d’avancer les connaissances et le développement de la photosynthèse artificielle. Une solution encore peu développée au problème énergétique auquel notre société fait face est le recours aux combustibles solaires, et il est grand temps que la recherche avance et que la transition énergétique s’impose plus efficacement et largement. / Developpment of environment-friendly sources of energy is one of the stakes major for our societies. To hope for the sustainability of Humans on Earth, it is essential to change our consumer habits on energetics by breaking our dependance on fossil fuels, which use leads to ecological desasters and which stocks are running out. The key of this important challenge is the growth of renewable energy sources, and this is called energy transition. The ideal energy would not produce any polluting waste, would be efficient and widely available. Solar energy is an excellent candidate because it is by far the most abundant and promising source of clean energy. Thus, important efforts are made to developp the solar technologies, including artificial photosynthesis.Artificial photosynthesis was created a century ago and is the focus of many interests and researchs. This technology aims at mimicking the natural photosynthesis realized by plants ; and that in order to store the energy coming from the Sun irriadiation in compounds that can be used at demand. Artificial photosynthesis consists in the elaboration of synthetic systems able under light impulsion to realize the water splitting/decomposition reactions in a catalytique way, generating hydrogène or CO2 reduction products, which are called solar fuels thanks to their high energetic potentials. Indeed, photosynthesis begins with the photo-catalysis of water oxidation, which extirpates the electrons and protons of water molecules. And it is these electrons and protons which will be used to produce the solar fuels.Recently, a real commitment to understand deaply the mechanisms that take place during these catalysed reactions seems to appear. These transformations involve multiple photo-induced electron transfers and it returns their study relatively complicated. Thanks to technological breakthroughs, we studied in a thorough way several photocatalytic systems to draw knowledges ; allowing the rationalisation of the design and then the efficiency improvement of future developped systems. These technical advances were possible thanks to interdisciplinary collaborations between chemists and physicists and led to the developpment of a set-up of « double-pump » transient absorption, that enables to characterize the transient species formed and to track down the pathways during two successive photoinduced electron transfers.In the second part of this work, new catalysts were developped for the photocatalysis of water oxidation reaction. The big majority of the studies led so far on this subject concerned molecular systems, but the lack of robustness and reusability of homogeneous catalysts pushed the research towards materials area. Since about forty years, heterogeneous systems were developped for photocatalysis of several reactions. We explored two types of materials, nanoparticules as catalyst in photocatalytic systems ; and polymers that are able on their own to realize all the functions required for the photocatalysis of a reaction such as water oxidation under visible light irradiation.Thus, during this PhD we tried by two approaches to increase the knowledges and the development of artificial photosynthesis. A solution that is still under-developped to fix the energetic issue our society is facing to, is the use of solar fuels ; and it’s imperative for the research to move forward and that energy transition prevails more effectively and widely.

La criticité du réchauffement climatique incite à chercher des solutions pour réduire les émissions de dioxyde de carbone (CO₂). Le développement de catalyseurs qui peuvent aider à capturer, activer, réduire et valoriser le CO₂ est au cœur de ce défi. Cette thèse a répondu à cet appel en développant des mimétismes moléculaires inspirés de la Nature, dans le cadre plus large de la photosynthèse artificielle. Au début il s'agissait de suivre le parcours d'un photon de lumière visible et de déterminer comment il peut réduire la molécule de CO₂. Ensuite afin de réaliser des catalyseurs plus efficaces, de nouvelles molécules ont été synthétisées en s’inspirant de l’enzyme CO déshydrogénase (CODH) qui présente des performances exceptionnelles pour la réduction du CO₂. Enfin, une autre propriété du CODH a conduit à une validation de principe pour la valorisation immédiate du CO photo-produit dans la synthèse des liaisons amides marqués, une caractéristique courante des médicaments. / The criticality of global warming urges for the advancement of science to reduce carbon dioxide (CO₂) emissions in the atmosphere. At the heart of this challenge is the development of sustainable catalysts that can help capture, activate, reduce, and eventually valorize CO₂. This PhD work tried to respond to this call by developing molecular mimics inspired by natural systems in the larger scheme of artificial photosynthesis. Firstly, it involved tracking the journey of a photon of visible light and how it is transformed to a reducing power able to reduce CO₂. Secondly, in search for more efficient and stable catalysts, new mimics were synthesized inspired by the exceptional performance of CO dehydrogenase enzymes (CODH) in reducing CO₂. Lastly, further understanding of CODH also led to a proof-of-concept that directly valorizes the photo-produced CO for the synthesis of isotopically-labelled amide bonds, a common motif in pharmaceutically-relevant drugs.

No description available.