Made available in DSpace on 2014-10-09T12:27:47Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:04:53Z (GMT). No. of bitstreams: 0 / Cinza leve de carvão, resíduo gerado em usina termelétrica, foi usada para sintetizar zeólita por meio de tratamento hidrotérmico com solução de NaOH. A cinza leve (CL-2) e a zeólita sintética (ZM-2) que foi predominantemente identificada como hidroxi-sodalita foram utilizadas como adsorventes dos corantes aniônicos índigo carmina (IC) e reativo laranja 16 (RL16) de soluções aquosas. Nos processos de adsorção, os efeitos de tempo de contato, concentração inicial de corantes, pH, massa de adsorventes e temperatura foram avaliados. O estudo cinético de adsorção demonstrou que os resultados apresentaram melhor ajuste ao modelo de pseudo-segunda ordem e que adsorção de superfície e difusão intrapartícula participaram no mecanismo de adsorção. Os parâmetros termodinâmicos demonstraram que a adsorção foi espontânea em todos os processos de adsorção. Os processos de adsorção foram de natureza endotérmica para todos os sistemas, com exceção do sistema IC/ZM-2, em que foi exotérmico. Os dados de entropia mostraram a ocorrência do aumento da desordem na interface sólido/solução durante a adsorção em todos os sistemas, exceto novamente no IC/ZM-2, no qual se verificou a diminuição da desordem na interface. As isotermas de adsorção ajustaram-se à equação linear de Langmuir. As capacidades máximas de adsorção foram 1,48 mg/g para o sistema IC/CL-2; 1,13 mg/g para IC/ZM-2; 0,96 mg/g para RL16/CL-2 e 1,14 mg/g para RL16/ZM-2 à temperatura ambiente. O estudo de dessorção realizado com água, com soluções aquosas ácidas e com solução aquosa básica demonstrou ser ineficiente tanto para a recuperação dos corantes quanto para a regeneração dos adsorventes. / Dissertacao (Mestrado) / IPEN/D / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP

Submitted by Marco Antonio Oliveira da Silva (maosilva@ipen.br) on 2017-10-27T12:15:25Z No. of bitstreams: 0 / Made available in DSpace on 2017-10-27T12:15:25Z (GMT). No. of bitstreams: 0 / A síntese de zeólitas a partir de cinzas leves e pesadas de carvão mineral foi realizada por tratamento hidrotérmico alcalino, as quais foram nomeadas ZCL e ZCP, respectivamente. As zeólitas organomodificadas ZML e ZMP foram obtidas a partir da modificação superficial de ZCL e ZCP, respectivamente, utilizando o surfactante catiônico brometo de hexadeciltrimetilamônio. A partir das soluções remanescentes geradas na síntese de ZCL e ZCP foi possível sintetizar duas novas zeólitas. As características físicoquímicas dos nanomateriais zeolíticos sintetizados, bem como de suas respectivas matérias primas, tais como: capacidade de troca catiônica, massa específica, área específica, composição química, mineralógica e morfológica, entre outras, foram determinadas. Os adsorventes ZML e ZMP foram utilizados na remoção dos corantes Azul Direto 71 (DB71) e Rodamina B (RB) de soluções aquosas em sistema de batelada. Desta forma, quatro sistemas DB71/ZML, RB/ZML, DB71/ZMP e RB/ZMP foram investigados. Os modelos de pseudoprimeira ordem e pseudo-segunda ordem foram aplicados aos dados experimentais para o estudo da cinética de adsorção. O modelo de pseudosegunda ordem foi o que melhor descreveu o processo de adsorção de todos os sistemas corante/zeólita organomodificada. O equilíbrio da adsorção foi analisado a partir de quatro modelos de isoterma, sendo eles: Langmuir, Freundlich, Temkin e Dubinin-Radushkevich (D-R). Os resultados mostram que os modelos de Freundlich e Langmuir melhor descreveram os dados experimentais dos sistemas DB71/ZML e DB71/ZMP, respectivamente. Para os sistemas com RB, o modelo de D-R foi o que melhor se ajustou para ambos adsorventes ZML e ZMP. O planejamento fatorial 24 foi aplicado para a análise dos seguintes fatores que influenciam o processo de adsorção: concentração inicial do corante (Co), pH, dose de adsorvente (M) e temperatura (T). De acordo com as condições estudadas concluiu-se, com o intervalo de confiança igual a 95%, que para o sistema DB71/ZML, os fatores e suas interações que mais influenciam foram C0, M, pH, pH*M, pH*C0, M*C0, pH*M*C0, nessa ordem. No sistema DB71/ZMP, a ordem de influência foi: M, C0, pH, pH*M, pH*C0, M*C0, pH*M*C0. Para os sistemas RB/ZML e RB/ZMP, os resultados foram: M, C0, M*C0, pH, pH*M e M, C0, M*C0, respectivamente. O equilíbrio de adsorção foi atingido em cerca de 40 min para todas as amostras. As porcentagens de remoção do DB71 estavam na faixa de 50 80% e 20 50% para ZML e ZMP, respectivamente. A faixa de porcentagens de remoção do RB variou entre 60 80% e 30 50% para ZML e ZMP, respectivamente. / Dissertação (Mestrado em Tecnologia Nuclear) / IPEN/D / Instituto de Pesquisas Energéticas e Nucleares - IPEN-CNEN/SP

Neste trabalho os complexos cis- [Ru(BAF)(bpy)(PPh3)(OH2)](ClO4)2 (monômero B) e cis-[Ru(dmbpy)2(PPh3)(OH2)](OPh)2 (monômero C) foram sintetizados e caracterizados através de métodos espectroscópicos e eletroquímicos, sendo utilizados na construção de novos eletrodos modificados EMs e aplicados na eletrooxidação de substratos orgânicos. A preparação destes EMs consistiu no recobrimento da superfície de eletrodos de feltro de carbono e de bastões de grafite pelos filmes poliméricos ancorados ao rutênio. Os intervalos de potencial aplicados para a polimerização dos complexos foram àqueles correspondentes, respectivamente, aos potenciais de polimerização do contra-íon difenolato e do ligante azóico contendo o grupamento fenol. A atividade catalítica destes EMs foi investigada através de um estudo cinético, através de eletrooxidações heterogêneas acompanhadas por UV/Vis de diversos compostos orgânicos como: safrol, isosafrol, álcool benzílico, fenil etil álcool, etil benzeno, tolueno, benzaldeído, ciclo hexen-2-ol, demonstrando que os EMs podem ser utilizados como catalisadores em reações de eletrooxidações com rendimentos satisfatórios. / In this work the complexes cis-[Ru(BAF)(bpy)(PPh3)(OH2)](ClO4)2 (B monomer) and cis-[Ru(dmbpy)2(PPh3)(OH2)](OPh)2 (C monomer) were synthesized and characterized by spectroscopic and electrochemical methods, and they were utilized in construction of new modified electrodes (MEs) and applied in electrooxidation of organic substrates. The preparation of these new MEs was done by coating the surfaces of carbon felt and carbon rod electrodes by polymeric films where the ruthenium complexes were anchored. The potential range applied to accomplish the polimerization of the complexes corresponds to the potencial ranges of diphenol anion and azoic ligand with the phenolic group, respectively. The catalytic activity of these MEs was studied by kinetic methodology monitoring the heterogeneous electroxidations by UV/Vis of some organic substrates like: safrol, isosafrol, benzylic alcohol, phenil ethyl alcohol, ethyl benzene, toluene, cycle-hexen-2-ol, showing that these EMs can be utilized as catalyst in electrooxidations reactions with goods yields.

Dyes for inkjet printing are typically of the chromonic type. Chromonic mesophases have gained considerable attention as a well-defined group of lyotropic mesogens with different properties from conventional amphiphiles. While extensive research has been dedicated to the field of surfactant liquid crystals, structural and aggregation studies of chromonics have only emerged as a topic of interest within the last few years. The liquid crystalline structures in aqueous solutions of commercial Cu - phthalocyanine and black dyes have been examined using a combination of optical microscopy, UV-vis spectroscopy, nuclear magnetic resonance, wide- and small-angle X-ray diffraction and electronic paramagnetic resonance with a view to examining the phase behaviour of the chromonic mesophases formed over a broad range of concentrations and temperatures. These studies were performed in order to resolve outstanding problems concerning structural properties of these systems. Optical microscopy allowed us to identify the liquid crystalline phases and to construct the phase diagram. The observations show that both of these dyes form nematic mesophase above 15% wt / wt% dye. The small-angle diffraction data confirmed that the nematic phase for the black dye is maintained throughout the 16-25% composition range. A further increase in concentration leads to the formation of the hexagonal phase. The Cu – phthalocyanine dye also formed a nematic phase at low concentrations, with the aggregates undergoing a phase transition to an orientationally ordered chromonic liquid crystal phase at high dye concentration. These studies showed that this ordered phase possessed hexagonal symmetry. The wide-angle X-ray results demonstrated that aggregation involved π-π stacking of the molecules into columns. An additional reflection at ca. 6.8Å was observed for the black dye, which is believed to arise from “head – to – tail” packing of the molecules within the aggregates (a similar phenomenon observed in other azo dyes, e.g. Edicol Sunset Yellow).The densities of both dyes were measured over the studied range of concentrations. This enabled us to calculate the parameters of the aggregates within the hexagonal mesophase. A comparison between the area of the molecule and the cross-section of the aggregates showed that the aggregates of both dyes were the unimolecular stacks.

1-Aza-2-azoniaallene salts are reactive intermediates that undergo [3+2] cycloaddition with many different types of multiple bonds. For the past several years, the Brewer group has studied the reactivity of these intermediates in intramolecular reactions, and have discovered that these cationic heteroallenes can react through a variety of other, mechanistically distinct, pathways to give different classes of nitrogen heterocycles. For example, prior work in the Brewer group revealed that 1-aza-2-azoniaallene salts could react in an intramolecular [4+2] cycloaddition reaction to give protonated azomethine imine salts containing a 1,2,3,4-tetrahydrocinnoline scaffold. Further study of the scope and limitations of this Diels-Alder-like reaction are described herein. These studies primarily focused on how varying the N-aryl ring and alkene substituents affected the reaction. We discovered that in several instances, the metal mediated reaction did not facilitate the cycloaddition very well, so we searched for alternative ways to facilitate the reaction. We discovered that a non-metallic Lewis acid (TMSOTf) provided very clean products with α-chloroazo compounds. I hypothesized that changing the leaving group adjacent to the azo might further improve the reaction. With this in mind, I developed a technique to prepare α-trifluoroacetoxyazo compounds by treating aryl hydrazones with trifluoroacetoxy dimethylsulfonium trifluoroacetate. This technique is compatible with all types of functional groups including nitro aryl compounds, which gave low yields of the corresponding chloroazo derivatives. Importantly, these α-trifluoroacetoxyazo compounds gave even better cycloaddition results when treated with TMSOTf, and this method is more practical, more environmentally friendly, and greener than the metal mediated technique. This process even returned sterically hindered products in high yield, and provide a dearomatized non-protonated azomethine imine salt, which further verified the proposed mechanism of the [4+2] cycloaddition. Azomethine imines are well known to undergo 1,3-dipolar cycloadditions with alkenes. We wondered if the protonated azomethine imine salts generated by the [4+2] cycloaddition could be used in a subsequent base-mediated [3+2] cycloaddition to generate structurally complex tetra- or pentacyclic products. We were pleased to find that the protonated azomethine imines indeed reacted smoothly with a variety of π-system in the presence of triethylamine to give the corresponding cycloadducts in high yields with moderate to high diastereoselectivities. In an attempt to understand the diastereoselectivity of these [3+2] cycloadditions better, I modeled them computationally.

No description available.

Understanding the fundamental physics in light absorption and perfect light absorption is vital for device applications in detector, sensor, solar energy harvesting and imaging. In this research study, a large area fabrication of Al-doped ZnO/Al2O3/graphene/Al2O3/gold/silicon device was enabled by a spin-processable hydrophilic mono-layer graphene oxide. In contrast to the optical properties of noble metals, which cannot be tuned or changed, the permittivity of transparent metal oxides, such as Al-doped ZnO and indium tin oxide, are tunable. Their optical properties can be adjusted via doping or tuned electrically through carrier accumulation and depletion, providing great advantages for designing tunable photonic devices or realizing perfect absorption. A significant shift of Raman frequency up to 360 cm-1 was observed from graphene in the fabricated device reported in this work. The absorption from the device was tunable with a negative voltage applied on the Al-doped ZnO side. The generated absorption change was sustainable when the voltage was off and erasable when a positive voltage was applied. The reflection change was explained by the Fermi level change in graphene. The sustainability of tuned optical property in graphene can lead to a design of device with less power consumption.

La photo-isomérisation de l’azopolymère cause des mouvements de masse permettant d'inscrire des figures d'interférences à la surface de films minces. Les films sont répliqués sur un substrat en PDMS transparente t étirable. Il forme des réseaux de phase. Les figures de diffraction décrivent les surfaces, elles sont utilisées pour modéliser numériquement les réseaux, quelles que soient les contraintes.Le projet WOLF vise à fabriquer des nano lasers blancs à colorants organiques. Un montage complexe de caractérisation est développé. Le module d’excitation permet d’illuminer les nanotubes un à un. Le pompage tente de maximiser l’émission laser d’un unique nano objet. La collection du signal repose pricipalement sur l’utilisation d’une fibre optique ouvrant la porte de la microscopie confocale. La spectroscopie associée au montage révèle la formation de cavités au sein des nano bâtonnets organiques. Malgré la faible puissance du signal, les modes sont étudiés,mettant en évidence des nano-cavités. Les nano-objets sont parfois étudiés dans des liquide. La micro-fluidique est développée au laboratoire. Sans salle blanche une méthode photolithographique est développée à bas coûts. Les puces nouvellement créées sont testées dans le mélange de deux fluides et lors de la caractérisation de nanoparticules en suspension par leur mouvement Brownien. Cette thèse à permis de mettre en place les outils d’observation de nano-objets uniques / Azopolymer photo-isomerization causes matter motion. This phenomena is responsible for the inscription of the interference pattern on surface of thin films. The films are replicated by pouring PDMS on it. PDMS is a transparent and stretchable polymer. The diffraction pattern of these gratings describes the surface. These informations are used to numerically simulate the surface irrespective of the mechanical constraints.The WOLF project try to synthetize white lightorganic nanolasers. For that purpose, a complex setup has been realised. The excitation part of the setup illuminates a single nano-laser or a few. The pump source is designed to optimise the amplified emission of the nanolasers. The collection of the signal is based on an optical fiber.This fibre has given us the chance to use confocal microscopy. Spectroscopy combined with our setup show the existence of nanocavities among nanotubes. In spite of the low signal power, the emitting modes are studied and show the cavity effect of these lasers. In another context, nano-objets are sometimes studied in solution. For that reason, a new experiment has been setup, namely, microfluidic. Without the use of a clean room, a low cost photolithograpic method is developped. The microfluidic chips are tested during the mixing of to liquids and during the obsevation of the brownian motion of particules. This PhD thesis has given the tools needed for the characterization of single nano-objects.

No description available.

No description available.