Global ETD Search

31	Návrh závodního vozidla kategorie T1 / T1 Category Race Car Design Šťáva, Martin January 2019 (has links) This diploma thesis deal with conceptual design of racing car of T1 category. Car consist of tubular frame, front and rear double wishbone suspension, braking system and conceptual design of the fairing. These are the basic of this thesis. For the completeness of the design, the location of the crew and the placement of the components inside the frame are also proposed. Adams Car 2016, Autodesk Inventor 2016, Ansys Workbench 18.1 were used for designing, testing, simulation and calculations. Designed T1 category race car meets International Automobile Federation (FIA) technical standards and safety regulatons.
32	Návrh zadní nápravy formule SAE / Design of formula SAE rear axle Tomášek, Pavel January 2008 (has links) This thesis is concerned with the design of Formula SAE rear axle suspension and spring suspension. First part of the thesis deals with the preliminary desing and is followed by the kinematic analysis and optimalization of the rear axle geometric ordering. Next part is related to the verification of the spring suspension characteristics. Both these parts were worked up with the aid of the software ADAMS. Last part of the thesis includes the engineering desing of rear axle components and stress and deformation analysis.
33	Návrh zařízení pro měření a seřízení podvozku závodního automobilu. / Design of facilities for measuring and set-up of race car chassis Hejtmánek, Petr January 2009 (has links) This Diploma thesis deals with the design of facilities for measuring wheel alignment and set-up of race car chassis. Two versions of measuring system have been elaborated, each measurement procedure is described. Stress analysis of main parts follow. The last part consists of factors affecting accuracy of measurement.
34	Přestavba zavěšení předních kol automobilu / Conversion of Car Front Suspension Chaura, Václav January 2019 (has links) This diploma thesis is focused on the design of the conversion of the car front suspension for racing purpose. Existing suspension solution is described by analyse static and kinematic quantities. Furthermore, a change of suspension is proposed to improve the driving characteristics of the vehicle, where the kinematic, dynamic and strength analysis of the newly designed suspension is performed. The conclusion summarizes the comparison of the original and the new suspension design.
35	Měření odklonu kola během jízdy / Measurement of camber during driving Vojtěšek, Aleš January 2015 (has links) The subject of this master's thesis is design measurement and measure change wheel camber angle during driving. For this task were used parts from Corrsys-Datron and remaining elements needed to be manufactured. With complete system measurements were done and outputs data were displayed by Matlab and evaluated. Based on data evaluation is possible exactly determine relative position of the wheel to the road surface and to the body of vehicle.
36	Ausgewählte statistische Betrachtungen im Flugzeugentwurf: Superkritische Profile und Fahrwerk Gulla, Duncan January 2019 (has links) (PDF) Kenntnisse über Parametereigenschaften und Charakteristiken von Flugzeugkomponenten sind eine wesentliche Grundlage für Methoden des Flugzeugentwurfs. Daher ist Ziel dieser Arbeit, statistische Merkmale und Kenngrößen einer für den Flugzeugbau und Entwurf relevanten Auswahl an Komponenten zu erschließen. Dabei wurden zunächst superkritische Tragflügelprofile hinsichtlich ihrer geometrischen Eigenschaften (relative Profildicke, Wölbung, Dickenrücklage, Wölbungsrücklage und der sogenannte "Leading Edge Sharpness Parameter") untersucht. Diese Eigenschaften wurden mit der Software XFLR5 aus einer Auswahl an superkritischen Profilgeometrien erhoben und mit grafischen und beschreibenden Statistikmethoden ausgewertet. Die Profile wiesen relative Wölbungen von 0 % bis 3,4 % auf, die Mehrzahl entfiel auf Wölbungen von 1 % bis 2 %. Die Wölbungsrücklagen zeigten die für superkritische Profile typische Lage im hinteren Profilbereich zwischen 70 % und 90 % der Profiltiefe. Die Dickenrücklagen verteilten sich um einen Mittelwert von 37 % der Profiltiefe. Eine Betrachtung von Flugzeugreifendimensionen sollte das Verhältnis von Reifenbreite zum Durchmesser w/d charakterisieren. Es wurde ein annähernd lineares Verhalten festgestellt. Die Werte des Parameters w/d umfassten einen Bereich von 0,3 bis 0,4. Durch Regressionsanalysen konnten auch die Abhängigkeiten des Parameters w/d von nur einer bekannten Reifendimension (Breite oder Durchmesser) aufgezeigt werden. Die im Rahmen dieser Arbeit dargestellten Erkenntnisse können als Grundlage weiterführender Untersuchungen genutzt werden. ddc:620 info:eu-repo/classification/ddc/629.13 Luftfahrt Luftfahrzeug Flugzeugaerodynamik Fahrwerk Aeronautics Airplanes Aerodynamics Airplanes--Landing gear Tragflügelprofil Superkritischer Flügel Flugzeugentwurf Profildicke Wölbung Dickenrücklage Wölbungsrücklage XFLR5 Flugzeugreifen Reifenbreite Reifendurchmesser airfoil supercritical wing aircraft thickness camber tire regression
37	Těhlice vozu kategorie Formule SAE / Wheel Hub Carrier for car of Formule SAE Vymazal, Roman January 2008 (has links) This thesis deals with a mechanical design of a front wheel hub carrier and a rear wheel hub carrier for Formula SAE. It contains the main design as well as the control of a screw and computer loading solve process. The essential objectives of this thesis are the optimization of the mechanical design and following manufacturing of desired parts and their practical usage in a Formula SAE race car.
38	Aerodynamics of the Maple Seed Desenfans, Philip January 2019 (has links) (PDF) Purpose - The paper presents a theoretical framework that describes the aerodynamics of a falling maple (Acer pseudoplatanus) seed. --- Methodology - A semi-empirical method is developed that provides a ratio stating how much longer a seed falls in air compared to freefall. The generated lift is calculated by evaluating the integral of two-dimensional airfoil elements using a preliminary falling speed. This allows for the calculation of the definitive falling speed using Blade Element Momentum Theory (BEMT); hereafter, the fall duration in air and in freefall are obtained. Furthermore, the input-variables of the calculation of lift are transformed to require only the length and width of the maple seed. Lastly, the method is applied to two calculation examples as a means of validation. --- Findings - The two example calculations gave percentual errors of 5.5% and 3.7% for the falling speed when compared to measured values. The averaged result is that a maple seed falls 9.9 times longer in air when released from 20 m; however, this result is highly dependent on geometrical parameters which can be accounted for using the constructed method. --- Research limitations - Firstly, the coefficient of lift is unknown for the shape of a maple seed. Secondly, the approximated transient state is yet to be verified by measurement. --- Originality / Value - The added value of this report lies in the reduction of simplifications compared to BEMT approaches. In this way a large amount of accuracy is achieved due to the inclusion of many geometrical parameters, even though simplicity is maintained. This has been accomplished through constructing a simple three-step method that is fundamental and essentially non-iterative. ddc:620 info:eu-repo/classification/ddc/629.13 Aerodynamik Ahorn Auftrieb Strömungsabriss Aerodynamics Maple Lift (Aerodynamics) Stalling (Aerodynamics) Aerodynamisches Profil Anstellwinkel Freier Fall Bergahorn Samen Evolutionsbiologie Aerofoils Angle of attack (Aerodynamics) Acer pseudoplatanus Seeds Evolution (Biology) Blade Element Momentum Theory BEMT free fall post-stall chord twist camber autorotation
39	Návrh předpjaté nádrže / Design of reinforced tank Štramberský, Martin January 2014 (has links) The matter of this diploma thesis is a static storage tank for petroleum substances, the study of a solution for appropriate shape of shell and its effort to dihedral for roofing, and the study of effect of the storage of inner roofs walls of the tank to the size of the internal forces. The internal walls are carried out by the method of finite elements in the engineering program Scia Engineering 2013 and on the basis of it, designing of the framing sections of the tank. There is a calculation part of the lower horizontal bias wreaths of the shell and internal supporting wall. All the components are assessed on the 1st limit state of the load-bearing capacity and the 2nd limit state of the application (emergence cracks, limiting voltage in the concrete and a prestressing steel). The existing external wall is assessed only on the marginal status load of carrying capacity. The part of diploma thesis is also drawing documentation, accompanying report and technical report. The goal of the diploma thesis was to design the tank without an occurrence of the cracks in the concrete so as the vertical wall was prestressing only in the horizontal direction and the optimal proposal roof tanks as an addition.
40	Měření parametrů pneumatik / Tyre Parameters Measurement Pokorný, Pavel January 2012 (has links) It is the tyre that ensures the interaction between a wheel and road surface and it is the the tyre which also acts as a primary cushioning. Its construction, features and condition highly influence driving properties of a car and thus passenger safety as well. In motorsports the tyre is a key part of the vehicle and therefore it is necessary to make use of its complete potential for reaching the best results. The aim of this thesis is a device construction suitable for tyre parameter and their characteristics measurement. The next task is to design a measuring system for tyre pressure and temperature monitoring. With using of these devices a few real-tyre measurements and subsequent result evaluation will be done. The output of the thesis is an overview of construction details, overview of selected tyre parameters, design and drawing documentation of multipurpose measuring device and the results of my measurements.

Search results