1 |
Ink film splitting acoustics and tack on paper in offset printingVoltaire, Joakim January 2004 (has links)
<p>This licentiate thesis comprises two complementary studiesdealing with the sheet-fed offset printing of paper. The firststudy addresses the further development of a practical methodto acoustically monitor and analyse the film splitting ofoffset inks. This method was tested on laboratory printingequipment, specifically monitoring the continuous ink splittingin the nip of an IGT ink distribution unit and the short-timeink splitting in the inked print disc-paper nip of the printingunit of an ISIT instrument. The study verified that the inksplitting component of the acoustic signal contributes to thehigher frequency range (10-20 kHz) of the audible spectrum, andcan thus be separated from the lower frequency machine noise.Furthermore, the film splitting component is sensitive tochanges in the ink and printing conditions, thus enabling itsuse in probing the fundamental mechanisms occurring during inktransfer and also suggesting its applicability fornon-intrusive monitoring of industrial printing presses. Anincrease in film thickness during ink distribution correspondsto an increased acoustic power, with the exception of very lowink amounts, which give reduced acoustic emission due to alubricating effect. The effect of the presence of fountainsolution was simulated by adding emulsion-forming, butnon-evaporative, ethylene glycol. This produces an increase inacoustic power at low amounts, due to resistance to glycol dropdeformation, followed by a decrease at higher amounts owing toexcess glycol lining the rolls. During test printing on paper,increasing ink amounts also display an increased acousticresponse.</p><p>The second study further developed a theoretical model toexplain and predict the evolution of ink tack in terms of inksetting directly after offset printing on coated paper. Asmeasured by the ISIT, the tack of the printed ink rises duringshorter time periods, attains a maximum, and then falls atlonger times. The proposed model described how the ink tack,characterised by the impulse during disc pull-off, dependsdynamically on the viscoelastic properties of the ink, thecontact with paper and disc, and the flow geometry. The inksetting was modelled as a diffusion-limited transport of theoil vehicle through the ink film and into the pores of thecoated paper. The coupling of the tack and setting models,compared to the ISIT experimental measurements, then provided adiffusion coeffcient for ink setting during the tack riseperiod. This coeffcient decreases with time, and increasinglyrapidly with decreasing ink amounts due to theconcentration-dependent diffusion. For an accurate descriptionthe elasticity and adhesion effects also have to be considered,at least for explaining the tack fall period.</p>
|
2 |
Avalia??o dos fatores da perda de competitividade das empresas brasileiras de pap?is de impress?o revestidos: o couch?. / Evaluation of the factors responsible for the loss of competitiveness in the Brazilian s printing coated paper industry: Coated Wood Free.VILELA, Antonio Carlos 09 June 2009 (has links)
Made available in DSpace on 2016-04-28T20:19:23Z (GMT). No. of bitstreams: 1
2009 - Antonio Carlos Vilela.pdf: 1562012 bytes, checksum: 6336ba47d980fb5d06f60391e0fc9e7f (MD5)
Previous issue date: 2009-06-09 / This study has had as objective, the identification of the main factors responsible for the loss of competitiveness in the Brazilian?s printing and coated industry. Coated wood free. For this identification was applied a strategy of data evaluation through structured interviews with four professionals with experience in the Paper Sector. It was used information issued in articles, magazines, dissertations, newspapers and on top of that primary and secondary data from the Pulp and Paper Sector were used, specifically the coated wood free for printing segment. The study had as assumption that there was loss of competitiveness in the Brazilian market, and the main factor responsible for this loss could be attributed to a systemic factor, the exchange rate. There was an increase of importation and reduction of exportation in the period of the study. The main factors identified in the interviews in sequence of importance and according to the interviewers were; exchange rate, the illegal usage of duty free operation during the importation and the lack of update the industrial equipments in the Brazilian Mills The currency, as a main factor of competitiveness loss for the Coated paper sector and it was confirmed through the evaluation of secondary figures of importation grow and exportation reduction in the period of 2003 till 2008. Other factor, the illegal usage of duty free operation during the importation, was based only in the perception of the interviewers; there were no dada available due to the subjectivity of this topic. The third factor, the lack of update the industrial equipments in the Brazilian Mills appointed during the interviews. It could be confirmed in the analyze of the world?s fastest paper machines and more competitive in the world in comparison with Brazilian?s paper machines which speed are very far from the more competitive machines in the world. The Brazil is not even mentioned in this article of machines caparison. When the factors that determine the competitiveness of printing coated papers are analyzed in group, the conclusion is that Brazil is not competitive in this segment due to several business factors. The currency that is a systemic factor and appears in the periods of currency valuation works in the process of exposure of the low competitiveness already existent. / Este trabalho teve como objetivo identificar os principais fatores que levaram a ind?stria brasileira de papel de imprimir revestido, o Couch?, ? perda de competitividade. Para identifica??o desses fatores foi aplicada a estrat?gia de an?lise de dados atrav?s da realiza??o de entrevista estruturada com quatro profissionais experientes ligados ao setor de pap?is, informa??es publicadas em artigos, revistas, teses e disserta??es, alem dos dados prim?rios e secund?rios do setor de celulose e papel, especificamente os do segmento do papel de imprimir revestidos ? o Couch?. Dentro deste objetivo foi adotada a suposi??o de que houve perda de competitividade no mercado brasileiro, e que um dos principais fatores da perda desta competitividade poderia ser atribu?do a um fator sist?mico, o cambio, havendo aumento das importa??es e redu??o das exporta??es no per?odo estudado. Os principais fatores identificados nas entrevistas, por ordem de import?ncia e segundo os entrevistados, foram: o cambio, a pr?tica desleal de isen??o tribut?ria e a falta de atualiza??o do parque industrial brasileiro. O cambio, como principal fator de perda de competitividade do setor de pap?is revestidos, pode ser corroborado atrav?s da an?lise dos dados secund?rios de importa??o crescente e exporta??o declinante no per?odo analisado de 2003 a 2008. O outro fator de pr?tica desleal da isen??o tribut?ria ficou apenas na percep??o dos entrevistados, n?o havendo dados dispon?veis para sua avalia??o pelo pr?prio grau de subjetividade deste tema. O terceiro fator de perda de competitividade apontado nas entrevistas foi a falta de atualiza??o do parque industrial brasileiro. Isto pode ser confirmado pela an?lise dos dados das m?quinas de papel mais velozes e competitivas do mundo em compara??o com as do Brasil, cujas velocidades est?o muito aqu?m das mais competitivas do mundo. O Brasil n?o ? sequer citado no artigo comparativo. Quando os fatores determinantes da competitividade dos pap?is de imprimir revestidos s?o analisados em conjunto, observa-se que o Brasil n?o ? competitivo neste segmento devido a diversos fatores empresarias. Quando a quest?o cambial, que ? um fator sist?mico, aparece em per?odos de valoriza??o cambial, este somente exp?e e agrava mais ainda esta baixa competitividade existente.
|
3 |
Paper based Supercapacitors for vehicle KERS-applicationBlomquist, Nicklas January 2012 (has links)
High mobility has been a standard in the modern world for decades. This has resulted in high energy consumption, diminishing fossil energy reserves and rising levels of greenhouse gases. By recovering the energy lost in deceleration of vehicles the total energy consumption can be decreased and exhaust emissions reduced. This can be done with a kinetic energy recovery system (KERS) that converts kinetic energy to electric energy during deceleration, which then can be used for acceleration. KERS requires an electrical storage device with high power density, due to the high power levels generated at heavy braking. Batteries does not generally meet these requirements, especially in the cost-effective point of view, but different types of capacitors can be used to obtain a cheap and effective system. To get such an energy storage device small, lightweight and inexpensive while the technology is sustainable requires avoidance of rare metals and hazardous materials. In this master thesis energy and power levels for KERS has been modelled, based on standardized measurements techniques and small paper-based supercapacitors have been built and tested in order to model size, weight and price for a full-scale energy storage device to a KERS-application. The models showed that energy consumption in urban traffic could be reduced with 18% and with an electrode material for the energy storage device with a capacitance of about 1500 F/m2 a reasonable size and weight is obtained. To reach these values of capacitance in paper-based supercapacitors further testing is required on area and layer dependence and for different electrodes.
|
4 |
Ink film splitting acoustics and tack on paper in offset printingVoltaire, Joakim January 2004 (has links)
This licentiate thesis comprises two complementary studiesdealing with the sheet-fed offset printing of paper. The firststudy addresses the further development of a practical methodto acoustically monitor and analyse the film splitting ofoffset inks. This method was tested on laboratory printingequipment, specifically monitoring the continuous ink splittingin the nip of an IGT ink distribution unit and the short-timeink splitting in the inked print disc-paper nip of the printingunit of an ISIT instrument. The study verified that the inksplitting component of the acoustic signal contributes to thehigher frequency range (10-20 kHz) of the audible spectrum, andcan thus be separated from the lower frequency machine noise.Furthermore, the film splitting component is sensitive tochanges in the ink and printing conditions, thus enabling itsuse in probing the fundamental mechanisms occurring during inktransfer and also suggesting its applicability fornon-intrusive monitoring of industrial printing presses. Anincrease in film thickness during ink distribution correspondsto an increased acoustic power, with the exception of very lowink amounts, which give reduced acoustic emission due to alubricating effect. The effect of the presence of fountainsolution was simulated by adding emulsion-forming, butnon-evaporative, ethylene glycol. This produces an increase inacoustic power at low amounts, due to resistance to glycol dropdeformation, followed by a decrease at higher amounts owing toexcess glycol lining the rolls. During test printing on paper,increasing ink amounts also display an increased acousticresponse. The second study further developed a theoretical model toexplain and predict the evolution of ink tack in terms of inksetting directly after offset printing on coated paper. Asmeasured by the ISIT, the tack of the printed ink rises duringshorter time periods, attains a maximum, and then falls atlonger times. The proposed model described how the ink tack,characterised by the impulse during disc pull-off, dependsdynamically on the viscoelastic properties of the ink, thecontact with paper and disc, and the flow geometry. The inksetting was modelled as a diffusion-limited transport of theoil vehicle through the ink film and into the pores of thecoated paper. The coupling of the tack and setting models,compared to the ISIT experimental measurements, then provided adiffusion coeffcient for ink setting during the tack riseperiod. This coeffcient decreases with time, and increasinglyrapidly with decreasing ink amounts due to theconcentration-dependent diffusion. For an accurate descriptionthe elasticity and adhesion effects also have to be considered,at least for explaining the tack fall period.
|
5 |
Development of Antibacterial Efficacy Testing Method for TiO2 Coated Paper in the Presence of LightZoghi, Parisa 08 1900 (has links)
<p> Photocatalytic TiO2 coated paper was prepared as antibacterial paper to investigate bactericidal activity of TiO2 in the presence of UV light. When TiO2 exposed to UV light, it produced hydroxyl radicals which were strong oxidative groups and could damage the cell wall causing death of bacteria. The goal of this work was to develop a promising method for microbiological examination of antibacterial paper and to test the disinfection properties of photocatalytic TiO2 coated paper after UV illumination.</p> <p> Three different methods were modified to test antibacterial effect of TiO2 coated paper. The disk diffusion method, the washing method, and the membrane filter method. It was found that disk diffusion technique would not work because of insolubility of TiO2 in water but it could be used for any other antibacterial paper that consisted water soluble agent. The results from membrane filter method agreed with those of washing method showing the reduction of E.coli colonies for TiO2 coated paper after exposure to UV, comparing to blank paper.</p> <p> With use of washing method, it was shown that by changing some functions such as: increasing TiO2 content on the paper, increasing UV irradiation time or UV intensity, survival ratio of the bacteria decreased.</p> / Thesis / Master of Applied Science (MASc)
|
6 |
Optical Response From Paper : Angle-dependent Light Scattering Measurements, Modelling, and AnalysisGranberg, Hjalmar January 2003 (has links)
No description available.
|
7 |
Effects of Coating Formulations on Thermal Properties of Coating LayersLiang, Chong 15 February 2010 (has links)
The effects of coating formulation on thermal characteristics of coating layers were systematically studied for xerographic toner fusion on coated papers. Model coatings were formulated using three types of ground calcium carbonate and one kaolin pigments, each mixed with 6, 10, 18, and 25 pph of styrene butadiene latex binder. Porosity was found to be a key parameter for coating thermal conductivity adjustment, and was determined by the latex concentration. The particle size distribution and morphology of pigments also affect the overall thermal characteristics of coating layers. Print qualities on model coated papers were evaluated by print gloss measurement, toner adhesion test, and pair-wise visual ranking, and it was proved that print gloss is reduced with increasing bulk thermal conductivity of coating layers. The coating layer consisted of Covercarb HP pigment and 10 pph of latex was found to have the best performance in the three print quality evaluation tests.
|
8 |
Effects of Coating Formulations on Thermal Properties of Coating LayersLiang, Chong 15 February 2010 (has links)
The effects of coating formulation on thermal characteristics of coating layers were systematically studied for xerographic toner fusion on coated papers. Model coatings were formulated using three types of ground calcium carbonate and one kaolin pigments, each mixed with 6, 10, 18, and 25 pph of styrene butadiene latex binder. Porosity was found to be a key parameter for coating thermal conductivity adjustment, and was determined by the latex concentration. The particle size distribution and morphology of pigments also affect the overall thermal characteristics of coating layers. Print qualities on model coated papers were evaluated by print gloss measurement, toner adhesion test, and pair-wise visual ranking, and it was proved that print gloss is reduced with increasing bulk thermal conductivity of coating layers. The coating layer consisted of Covercarb HP pigment and 10 pph of latex was found to have the best performance in the three print quality evaluation tests.
|
9 |
Optical Response From Paper : Angle-dependent Light Scattering Measurements, Modelling, and AnalysisGranberg, Hjalmar January 2003 (has links)
No description available.
|
10 |
Tactile Perception - Role of Physical PropertiesSkedung, Lisa January 2010 (has links)
<p>The aim of this thesis is to interconnect human tactile perception with various physical properties of materials. Tactile perception necessitates contact and relative motion between the skin and the surfaces of interest. This implies that properties such as friction and surface roughness ought to be important physical properties for tactile sensing. In this work, a method to measure friction between human fingers and surfaces is presented. This method is believed to best represent friction in tactile perception.</p><p>This study is focused on the tactile perception of printing papers. However, the methodology of finger friction measurements, as well as the methodology to link physical properties with human perception data, can be applied to almost whichever material or surfaces.</p><p> </p><p>This thesis is based on three articles.</p><p> </p><p>In Article I, one participant performed finger friction measurements, using a piezoelectric force sensor, on 21 printing papers of different paper grades and grammage (weight of the papers). Friction coefficients were calculated as the ratio of the frictional force and the normal force, shown to have a linear relationship. The values were recorded while stroking the index finger over the surface. The results show that measurements with the device can be used to discriminate a set of similar surfaces in terms of finger friction. When comparing the friction coefficients, the papers group according to paper surface treatment and an emerging trend is that the rougher (uncoated) papers have a lower friction coefficient than the smoother (coated) papers. In the latter case, this is interpreted in terms of a larger contact between the finger and paper surface.</p><p> </p><p>In addition, a decrease in friction coefficient is noted for all papers on repeated stroking, where the coated papers display a larger decrease. XPS (X-ray Photoelectron Spectroscopy) reveals that skin lipids are transferred from the finger to the paper surface, acting as a lubricant and hence decrease friction. Nevertheless, there is evidence that mechanical changes of the surface cannot be completely ruled out.</p><p> </p><p>The reproducibility of the finger friction measurements is elaborated in Article II, by using many participants on a selection of eight printing papers out of the 21. The trends in friction are the same; once again, the coated papers display the highest friction. There are notably large variations in the exact value of the friction coefficient, which are tentatively attributed to different skin hydration and stroking modes.</p><p> </p><p>These same participants also took part in a tactile study of perceived paper coarseness (“strävhet” in Swedish). The results reveal that the participants can distinguish a set of printing papers in terms of perceived coarseness. Not unexpectedly, surface roughness appears to be an important property related to perceived coarseness, where group data display that perceived coarseness increases with increasing surface roughness. Interestingly, friction also appears to be a discriminatory property for some subjects. A few participants showed opposite trends, which is evidence for that what is considered coarse is subjective and that different participants “weigh” the importance of the properties differently. This is a good example of a challenge when measuring one-dimensional perceptions in psychophysics.</p><p> </p><p>In Article III, a multidimensional approach was used to explore the tactile perception of printing papers. To do this, the participants scaled similarity among all possible pairs of the papers, and this similarity data are best presented by a three-dimensional space solution. This means that there are three underlying dimensions or properties that the participants use to discriminate the surface feel. Also, there is a distinct perceptual difference between the rougher (uncoated) and smoother (coated) papers. The surface roughness appears to be the dominant physical property when discriminating between a real rough paper and a smooth paper, whereas friction, thermal conductivity and grammage are more important when discriminating among the smooth coated papers.</p>
|
Page generated in 0.0553 seconds