No description available.

A presente tese tem por objetivo geral apresentar dois ensaios sobre os acidentes do trabalho à luz da teoria dos diferenciais salariais compensatórios sobre os empregos de risco no Brasil. Para tanto, a partir da base de dados da Relação Anual de Informações Sociais (RAIS), fornecida pelo Ministério do Trabalho (MT), são construídas variáveis relacionadas às taxas de ocorrência de acidentes do trabalho (fatal, lesão e doença) para as subclasses da Classificação Nacional de Atividades Econômicas (CNAE). No primeiro, intitulado \"O Valor estatístico de uma vida: estimativas para o Brasil\", é calculado o valor estatístico de uma vida para diferentes amostras de trabalhadores (homens, mulheres e trabalhadores blue-collars) com o objetivo de fornecer um parâmetro financeiro referente às indenizações a serem pagas a trabalhadores (e às suas famílias, em caso de acidentes fatais) que sofreram algum dos tipos de acidentes listados anteriormente no exercício de sua atividade laboral. No segundo ensaio, intitulado \"O impacto da \"Lei do Descanso\" nas horas trabalhadas, nos salários e nos acidentes não-fatais do trabalho dos caminhoneiros brasileiros\", é estimado o método de diferenças em diferenças generalizadas para avaliar se a Lei de Descanso, implementada em 2012 no Brasil, visando regular a jornada diária de trabalho e de descanso dos caminhoneiros brasileiros, com o intuito de melhorar as condições de trabalho e de reduzir os acidentes envolvendo estes profissionais, gerou diferenças estatísticas nas horas mensais trabalhadas, nos salários e nos acidentes não-fatais do trabalho (por lesão ou doença) destes trabalhadores. / The purpose of this thesis is to present two essays on labor accidents in the light of the theory of compensatory wage differentials on hazardous jobs in Brazil. To do so, based on the data base of the \"Relação Anual de Informações Sociais (RAIS), provided by the Ministry of Labor (MT), I use variables related to the rates of occurrence of labor accidents (fatal, injury and illness) constructed for the subclasses of the \"Classificação Nacional de Atividades Econômicas\" (CNAE). In the first essay, entitled \"The Value of a Statistical Life: Estimates for Brazil\", the value of a statistical life is estimated for different samples of workers (men, women and blue-collar workers) with the objective of providing a financial parameter related to the indemnities to be paid to workers (and their families in case of fatal accidents) who suffered any of the types of accidents listed, previously, in the exercise of their work activity. In the second essay, entitled \"The Impact of the \"Rest by Law\" on hours worked, wages, and non-fatal accidents of Brazilian truck drivers\", the method of generalized differences-in-differences is estimated to assess whether the \"Rest by Law\", implemented in 2012 in Brazil, aimed to properly regulate the daily work of the Brazilian truck drivers, with the purpose of improving their working conditions and reducing accidents involving these professionals, generated statistical differences on monthly hours worked, in wages and in non-fatal accidents of work (injury or illness) of these workers.

O objetivo desta tese foi o estudo da influência do aditivo redutor de retração (SRA) e o aditivo compensador de retração (SCA) em argamassas e pastas de cimento de escória ativada com silicato de sódio. A metodologia foi centrada na análise da retração por secagem e autógena, com o estudo de outras características que influenciam no fenômeno da retração, como as propriedades mecânicas. Para o avanço no conhecimento do efeito dos aditivos no comportamento do cimento de escória, foi caracterizada a microestrutura com a determinação da análise por termogravimetria, porosimetria e difração de raios X. Neste estudo foram empregados os seguintes teores de aditivo, porcentagem relativa à massa de aglomerante: 0,5%, 1%, 1,5% e 2% do aditivo SRA e 5%, 10% e 15% do aditivo SCA. Para a análise da influência da relação a/agl foram empregadas três teores: 0,40, 0,48 e 0,56. No estudo das amostras de referência, sem a utilização de aditivo, observou-se que o aumento da relação a/agl causa o aumento da retração por secagem e da retração autógena do cimento de escória ativada. A diminuição da resistência mecânica com o aumento da relação a/agl, o que torna o esqueleto sólido mais susceptível à deformações, e o aumento das tensões capilares, em razão do aumento da quantidade de água livre para ser evaporada, são os principais fatores para o aumento da retração por secagem. No caso da retração autógena, seu aumento é atribuído ao aumento da auto-secagem com o aumento do volume de poros com diâmetro na faixa de mesoporos, além da diminuição da resistência mecânica. O aditivo redutor de retração (SRA) conseguiu reduzir a retração por secagem em percentuais de 40% até 74% aos 28 dias, no entanto, este tipo de aditivo não obteve êxito no combate a retração autógena. Com relação à resistência mecânica, o aditivo SRA causou a redução de até 40%, efeito atribuído à diminuição do grau de hidratação e retardo do refinamento da porosidade. O aditivo compensador de retração (SCA) amenizou a retração por secagem e a retração autógena, reduzindo em até 64% e 70%, respectivamente, porém reduziu em até 60% a resistência mecânica do cimento de escória ativada. Com relação à microestrutura, o aditivo SCA diminuiu o grau de hidratação e aumentou a porosidade total, com o aumento da proporção do volume de macroporos. / The aim of this research was the study of the influence of shrinkage reducing admixture (SRA) and shrinkage compensating admixture (SCA) in mortars and pastes of blast furnace slag activated with sodium silicate. The method was centered in the analysis of free drying and autogenous shrinkage, with other characteristics that affect the shrinkage, as the mechanical properties. The microstructure behavior was accomplished with thermogravimetry (TG), mercury intrusion porosimetry (MIP) and X-ray diffraction (XRD). The samples were prepared with 0,5%, 1%, 1,5% and 2% of SRA admixture and 5%, 10% and 15% of SCA admixture, by binder mass. The effect of water/binder ratio was accomplished in three contents: 0,40, 0,48 and 0,56. In the reference mixtures, without admixtures, it was observed that an increase of water/binder ratio incurs in an increase of drying and autogenous shrinkage of alkali activated slag. The explanations for drying shrinkage behavior are the decrease of mechanical strength as consequence of water/binder increase, that turns the porous structure more susceptible to deformations, and the increase of the capillary tensions, attributed to the increase of free water to be evaporated. The increase of autogenous shrinkage with water/binder ratio is attributed to the increase of pore volume with diameter in the mesopores range, besides the decrease of the mechanical strength. The shrinkage reducing admixture (SRA) diminish drying shrinkage of 40% up to 74% at 28 days, however, this type of admixture was not capable to combat the autogenous shrinkage. About mechanical strength, the SRA admixture incurs in a decrease up to 40% of compression strength that it was attributed to the decrease of the hydration degree and retard of pore size refinement. The shrinkage compensating admixture (SCA) softened drying and autogenous shrinkage, reducing in up to 64% and 70%, respectively. However, the SCA admixture decreases in up to 60% mechanical strength of alkali activated slag. About microstructure, SCA admixture reduced the hydration degree and it increased the total porosity, with the increase of macropores volume.

No description available.

O objetivo desta tese foi o estudo da influência do aditivo redutor de retração (SRA) e o aditivo compensador de retração (SCA) em argamassas e pastas de cimento de escória ativada com silicato de sódio. A metodologia foi centrada na análise da retração por secagem e autógena, com o estudo de outras características que influenciam no fenômeno da retração, como as propriedades mecânicas. Para o avanço no conhecimento do efeito dos aditivos no comportamento do cimento de escória, foi caracterizada a microestrutura com a determinação da análise por termogravimetria, porosimetria e difração de raios X. Neste estudo foram empregados os seguintes teores de aditivo, porcentagem relativa à massa de aglomerante: 0,5%, 1%, 1,5% e 2% do aditivo SRA e 5%, 10% e 15% do aditivo SCA. Para a análise da influência da relação a/agl foram empregadas três teores: 0,40, 0,48 e 0,56. No estudo das amostras de referência, sem a utilização de aditivo, observou-se que o aumento da relação a/agl causa o aumento da retração por secagem e da retração autógena do cimento de escória ativada. A diminuição da resistência mecânica com o aumento da relação a/agl, o que torna o esqueleto sólido mais susceptível à deformações, e o aumento das tensões capilares, em razão do aumento da quantidade de água livre para ser evaporada, são os principais fatores para o aumento da retração por secagem. No caso da retração autógena, seu aumento é atribuído ao aumento da auto-secagem com o aumento do volume de poros com diâmetro na faixa de mesoporos, além da diminuição da resistência mecânica. O aditivo redutor de retração (SRA) conseguiu reduzir a retração por secagem em percentuais de 40% até 74% aos 28 dias, no entanto, este tipo de aditivo não obteve êxito no combate a retração autógena. Com relação à resistência mecânica, o aditivo SRA causou a redução de até 40%, efeito atribuído à diminuição do grau de hidratação e retardo do refinamento da porosidade. O aditivo compensador de retração (SCA) amenizou a retração por secagem e a retração autógena, reduzindo em até 64% e 70%, respectivamente, porém reduziu em até 60% a resistência mecânica do cimento de escória ativada. Com relação à microestrutura, o aditivo SCA diminuiu o grau de hidratação e aumentou a porosidade total, com o aumento da proporção do volume de macroporos. / The aim of this research was the study of the influence of shrinkage reducing admixture (SRA) and shrinkage compensating admixture (SCA) in mortars and pastes of blast furnace slag activated with sodium silicate. The method was centered in the analysis of free drying and autogenous shrinkage, with other characteristics that affect the shrinkage, as the mechanical properties. The microstructure behavior was accomplished with thermogravimetry (TG), mercury intrusion porosimetry (MIP) and X-ray diffraction (XRD). The samples were prepared with 0,5%, 1%, 1,5% and 2% of SRA admixture and 5%, 10% and 15% of SCA admixture, by binder mass. The effect of water/binder ratio was accomplished in three contents: 0,40, 0,48 and 0,56. In the reference mixtures, without admixtures, it was observed that an increase of water/binder ratio incurs in an increase of drying and autogenous shrinkage of alkali activated slag. The explanations for drying shrinkage behavior are the decrease of mechanical strength as consequence of water/binder increase, that turns the porous structure more susceptible to deformations, and the increase of the capillary tensions, attributed to the increase of free water to be evaporated. The increase of autogenous shrinkage with water/binder ratio is attributed to the increase of pore volume with diameter in the mesopores range, besides the decrease of the mechanical strength. The shrinkage reducing admixture (SRA) diminish drying shrinkage of 40% up to 74% at 28 days, however, this type of admixture was not capable to combat the autogenous shrinkage. About mechanical strength, the SRA admixture incurs in a decrease up to 40% of compression strength that it was attributed to the decrease of the hydration degree and retard of pore size refinement. The shrinkage compensating admixture (SCA) softened drying and autogenous shrinkage, reducing in up to 64% and 70%, respectively. However, the SCA admixture decreases in up to 60% mechanical strength of alkali activated slag. About microstructure, SCA admixture reduced the hydration degree and it increased the total porosity, with the increase of macropores volume.

Abstract : Wastepaper sludge ash (WSA) is generated by a cogeneration station by burning wastepaper sludge. It mainly consists of amorphous aluminosilicate phase, anhydrite, gehlenite, calcite, lime, C2S, C3A, quartz, anorthite, traces of mayenite. Because of its free lime content (~10%), WSA suspension has a high pH (13). Previous researchers have found that the WSA composition has poor robustness and the variations lead to some unsoundness for Portland cement (PC) blended WSA concrete. This thesis focused on the use of WSA in different types of concrete mixes to avoid the deleterious effect of the expansion due to the WSA hydration. As a result, WSA were used in making alkali-activated materials (AAMs) as a precursor source and as a potential activator in consideration of its amorphous content and the high alkaline nature. Moreover, the autogenous shrinkage behavior of PC concrete at low w/b ratio was used in order to compensate the expansion effect due to WSA. The concrete properties as well as the volume change were investigated for the modified WSA blended concrete. The reaction mechanism and microstructure of newly formed binder were evaluated by X-ray diffraction (XRD), calorimetry, thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). When WSA was used as precursor, the results showed incompatible reaction between WSA and alkaline solution. The mixtures were not workable and provided very low compressive strength no matter what kinds of chemical activators were used. This was due to the metallic aluminum in WSA, which releases abundant hydrogen gas when WSA reacts with strong alkaline solution. Besides, the results of this thesis showed that WSA can activate the glassy phase contained in slag, glass powder (GP) and class F fly ash (FFA) with an optimum blended ratio of 50:50. The WSA/slag (mass ratio of 50:50) mortar (w/b of 0.47) attained 46 MPa at 28 days without heat curing assistance. A significant fast setting was noticed for the WSA-activated binder due to the C3A phase, free lime and metallic aluminum contained in the WSA. Adding 5% of gypsum can delay the fast setting, but this greatly increased the potential risk of intern sulfate attack. The XRD, TGA and calorimetry analyses demonstrated the formation of ettringite, C-S-H, portlandite, hydrogarnet and calcium carboaluminate in the hydrated binder. The mechanical performance of different binder was closely related to the microstructure of corresponding binder which was proved by the SEM observation. The hydrated WSA/slag and WSA/FFA binder formed a C-A-S-H type of gel with lower Ca/Si ratio (0.47~1.6). A hybrid gel (i.e. C-N-A-S-H) was observed for the WSA/GP binder with a very low Ca/Si ratio (0.26) and Na/Si ratio (0.03). The SEM/EDX analyses displayed the formation of expansive gel (ettringite and thaumasite) in the gypsum added WSA/slag concrete. The gradual emission of hydrogen gas due to the reaction of WSA with alkaline environment significantly increased the porosity and degraded the microstructure of hydrated matrix after the setting. In the last phase of this research WSA-PC blended binder was tailored to form a high autogenous shrinkage concrete in order to compensate the initial expansion. Different binders were proportioned with PC, WSA, silica fume or slag. The microstructure and mechanical properties of concrete can be improved by decreasing w/b ratios and by incorporating silica fume or slag. The 28-day compressive strength of WSA-blended concrete was above 22 MPa and reached 45 MPa when silica fume was added. The PC concrete incorporating silica fume or slag tended to develop higher autogenous shrinkage at low w/b ratios, and thus the ternary binder with the addition of WSA inhibited the long term shrinkage due to the initial expansion property to WSA. In the restrained shrinkage test, the concrete ring incorporating the ternary binder (PC/WSA/slag) revealed negligible potential to cracking up to 96 days as a result of the offset effect by WSA expansion. The WSA blended regular concrete could be produced for potential applications with reduced expansion, good mechanical property and lower permeability. / Résumé : Les cendres de boues de désencrage (CBD) sont générées par une centrale de cogénération par combustion boues de désencrage. Ils se composent principalement de phase amorphe d'aluminosilicate, anhydrite, gehlenite, calcite, chaux, C2S, C3A, quartz, anorthite, des traces de mayénite. En raison de leur teneur en chaux libre (~ 10%), CBD ont un pH élevé (13). Les chercheurs précédents ont montré que la composition des CDB a une mauvaise robustesse et les variations conduisent à une certaine inconsistance pour le béton avec un mélange de ciment Portland (CP) et des CBD. Cette thèse a porté sur l'utilisation des CBD dans différents types de mélanges de béton pour éviter l'effet délétère de l'expansion due à l'hydratation des CBD. Par conséquent, les CBD ont été utilisées dans la fabrication des matériaux à activation alcaline (MAA), en tant que source précurseur et comme activateur potentiel en tenant compte de sa teneur en matière amorphe et la nature très alcaline des CBD. De plus, le retrait endogène du béton avec CP à faible rapport E/L a été utilisé afin de compenser l'effet d'expansion en raison des CBD. Les propriétés du béton ainsi que le changement de volume ont été étudiés pour le béton mélangé avec des CBD modifiés. Le mécanisme réactionnel et la microstructure du liant nouvellement formé a été évaluée par la diffraction aux rayons X diffraction (DRX), calorimétrie, l'analyse thermogravimétrique (ATG), microscopie électronique à balayage (MEB) et spectroscopie à dispersion d'énergie aux rayons X (DEX). Quand les CBD ont été utilisés comme précurseur, les résultats ont montré des réactions incompatibles entre CBD et une solution alcaline. Les mélanges ne sont pas maniables et donnent de très faibles résistances en compression, peu importe le type d'activateurs chimiques utilisés. Cela est dû à l'aluminium métallique dans les CBD, qui permet de libérer de l'hydrogène gazeux en abondance quand les CBD réagissent avec une solution alcaline forte. D'ailleurs, les résultats de ces recherches ont montré que les CBD peuvent activer la phase amorphe contenue dans le laitier, poudre de verre (PV) et les cendres volantes de classe F (CVF) avec un rapport de mélange optimal de 50:50. Un mortier avec un rapport massique 50:50 de CBD et de laitier (E/L de 0,47) atteint 46 MPa à 28 jours sans l’aide d’un murissement à chaud. Une prise rapide significative a été notée pour le liant CBD activé en raison de la phase C3A, chaux libre et l’aluminium métallique impliqué dans les CBD. L’ajout de 5% de gypse peut retarder la prise rapide, mais augmente grandement le risque potentiel de l’attaque au sulfate interne. Le DRX, ATG et l’analyse calorimétrique ont démontré la formation d'ettringite, C-S-H, la portlandite, hydrogrenat et carboaluminate de calcium dans le liant hydraté. Les différentes performances mécaniques du liant ont été étroitement liées à la microstructure correspondante qui a été prouvée par le MEB. Les liants hydratés CBD/laitier et CBD/CVF ont formé un type de gel C-A-S-H avec un faible rapport Ca/Si (0,47 ~ 1,6). On a observé un gel hybride (à savoir C-N-A-S-H) pour le liant CBD/PV avec un des très faibles rapports Ca/Si (0,26) et Na/Si (0,03). Les analyses MEB/DRX ont montré une formation de gel expansive (d’ettringite et de thaumasite) dans le gypse ajouté au béton avec les CBD et le laitier. L'émission progressive de l'hydrogène gazeux en raison de la réaction des CBD dans un environnement alcaline a augmenté la porosité et la dégradation de la microstructure de matrice hydratée après la prise. Dans la dernière phase de cette recherche, le liant avec un mélange de CBD et de CP a été développé pour former un retrait autogène élevé, afin de compenser l'expansion initiale. Différents liants ont été préparés avec le CP, CBD, la fumée de silice ou du laitier. La microstructure et les propriétés mécaniques du béton peuvent être améliorées en diminuant les rapports E/L et en incorporant la fumée de silice ou du laitier. La résistance en compression à 28 jours du béton aux CBD était supérieure à 22 MPa et atteint 45MPa lorsqu'on a ajouté de la fumée de silice. Le béton avec du CP incorporant de la fumée de silice ou du laitier ont tendance à développer un retrait endogène plus élevée à de faibles rapports E/L, et donc le liant ternaire avec l'ajout des CBD réduit le retrait à long terme en raison de la propriété d’expansion initiale des CBD. Dans l'essai de retrait empêché, l'anneau en béton incorporant le liant ternaire (CP/CBD/laitier) a révélé un potentiel négligeable à la fissuration jusqu'à 96 jours en raison de l'effet de décalage de l'expansion des CBD. Des liants modifiés avec des CBD peuvent être utilisés dans des mélanges de béton ordinaire pour des applications potentielles avec des expansions réduites, des bonnes propriétés mécaniques et une faible perméabilité.

The master thesis deals with the design of a condensing steam turbine for a waste incineration plant with regulated take for a heat exchanger, which has a heat output of 15 MWt and a temperature gradient of 60/90 °C. In the thesis, a thermal scheme was first designed, which was based on the required design parameters. The maximum mass flow of steam into the turbine is 38 t/h. The pressure and temperature of the admission steam is 37 bar and 440 °C. The degassing temperature is 105 °C and the cooling water temperature at the condenser inlet is 20 °C. The following is the design and thermodynamic calculation of the turbine flow channels. The first stage of the turbine is designed as a regulatory with equal pressure blades. The rest part of the turbine is designed with overpressure blades and is divided into 6 cones, in which there are a total of 27 stages. The strength inspection of the designed blade profiles was performed. A compensating piston and a gland system were designed. Finally, bearings for the rotor were designed and then the operating diagram of the turbine was constructed. The work is supplemented by a structural drawing of the longitudinal section of the turbine.

The diploma thesis is focused on the development of the concept of a mechanical device that would meet the necessary requirements to achieve a successful simulation of reduced gravity or microgravity on the tested body at its impact. The choice of a suitable mechanism is based on a literary research of all available variants and highlight of their specifics. Target values are created for the selected method of testing, upon reaching which the concept will be considered successful. In order to verify the functionality of the concept, a mechanism is assembled on a smaller scale. The individual components of the mechanism are tested and carefully selected. All essential physical processes taking place in the system are mathematically described and combined into a MATLAB script. A separate application is created to calculate the behavior of the system based on the specified input parameters.

No description available.

Este trabalho propõe um sistema fotovoltaico (PV) multifuncional conectado a um sistema elétrico trifásico a quatro fios e operando com estratégia dual de compensação ativa de potência. Além da injeção de potência ativa na rede elétrica, o sistema PV operara como um condicionador unificado de qualidade de energia (UPQC) suprimindo as correntes harmônicas da carga e compensando a potência reativa. Adicionalmente, tensões balanceadas, reguladas e livre de harmônicos são fornecidas para a carga. O sistema PV-UPQC é baseado em uma estratégia de compensação dual, na qual o conversor série opera como uma fonte de corrente senoidal, enquanto o conversor paralelo atua como uma fonte de tensão senoidal. Como resultado, nenhum comportamento transitório é observado na troca entre os modos de operação ilhado e interconectado do sistema PV-UPQC. Além disso, para contornar os problemas associados às mudanças bruscas de irradiação solar, uma malha de controle feed-forward atua na geração das referências de corrente do conversor série, de modo que se obtenha um rápido balanço de potência entre o sistema PV e a rede elétrica. Como resultado, as respostas dinâmicas tanto da corrente elétrica quanto da tensão do barramento CC são melhoradas. A análise detalhada envolvendo o fluxo de potência ativa dos inversores é realizada proporcionando um melhor entendimento sobre a operação do sistema PV-UPQC, bem como auxiliando no dimensionamento dos conversores de potência. Resultados de simulação e experimentais são apresentados para avaliar os desempenhos estáticos e dinâmicos do PV-UPQC conectado ao sistema elétrico de distribuição. / This work proposes a multifunctional single-stage three-phase four-wire grid-connected photovoltaic (PV) system operating with a dual active power-line compensating strategy. Besides injection of active power into the grid, the PV system operates as a unified power quality conditioner (UPQC), suppressing the load harmonic currents and compensating reactive power. Additionally, regulated, balanced and harmonic free output voltages are provided to the load. Since the PV-UPQC is based on a dual compensation strategy, the series converter operates as a sinusoidal current source, whereas the parallel converter operates as a sinusoidal voltage source. Thus, seamless transition can be achieved from the interconnected to the islanding operation modes, and vice-versa, without load voltage transients. Moreover, to overcome problems associated with sudden solar irradiation changes, fast power balance involving the PV array and the grid is obtained, since the feed-forward control loop acts on the generation of the series inverter current references. As a result, the dynamic responses of both inverter currents and dc-bus voltage are improved. Detailed analysis involving the active power flow through the inverters is performed allowing proper understanding of the PV-UPQC operation, as well as assisting to design of the power converters. Simulation and experimental results are presented to evaluate both dynamic and static performances of the PV-UPQC tied to the electrical distribution system.