Ground penetrating radar (GPR) technology has been used for the past 20 years for a variety of applications to assess transportation infrastructure. However, the main issue after all these years remains: "How well does GPR work and under what conditions?" Results show that GPR works well for some situations, but is not an appropriate tool for other situations. It is not used currently on a routine basis by the US Departments of Transportation (DOTs) due mainly to difficulties encountered with data interpretation. Data interpretation difficulties are mainly attributed to the fact that images obtained from the reflected signals are not photographs of the features that are beneath the surface being investigated. The images show the amplitude of the radar-reflected signals from the interfaces with different dielectric properties. Therefore, a considerable amount of experience and operator skill may be required to correctly interpret sub-surface radar results. To better understand reflected GPR signals, this research was conducted with the following objectives: to determine the dielectric properties of concrete over the used GPR frequency range; to synthesize the reflected air-coupled radar signals and compare them with measured waveforms; to model and study the effects of simulated defects in concrete on the reflected air-coupled and ground-coupled radar signals; and to validate the research results in the field by predicting layer thicknesses of flexible pavements and detecting moisture in flexible pavement systems. Several concrete slabs, 1.5x1.5 m, were constructed with known thicknesses, simulated defects, and different reinforcement configurations. The concrete mixes included four different bridge deck mixes and one concrete pavement mix used in the State of Virginia. Results have shown that the dielectric constant of concrete is frequency and mix dependent. However, modeling the reflected signals using an average complex dielectric constant over the entire radar frequency range led to modeled waveforms comparable to the measured waveforms. Although air- and water-filled voids did distort the reflected waveforms, a model was developed to predict the reflected waveforms from the simulated defects. Reinforcement was found to affect the reflected waveforms only when it was oriented in a direction perpendicular to the GPR antennas. A model was also developed to predict the GPR waveforms obtained from flexible pavements. This model could be used in a procedure to measure layer thicknesses more accurately by including losses that occur inside the pavement materials. Two different case studies, where a ground-coupled GPR system was used to locate moisture at different layers, have led to the conclusion that the ground-coupled GPR is a feasible tool to detect moisture inside pavements. / Ph. D.

Three main objectives have been set for this research. The first is to develop an accurate method for measuring the dielectric constant of PCC using a capacitor probe (C-Probe) that has been recently developed at Virginia Tech and validate it for field application to detect internal PCC flaws such as delamination. The C-Probe consists of two flexible conducting plates, connected to a Network Analyzer, with a specific separation between them. The second is to optimize the C-Probe design configuration for different PCC slab thicknesses. The third objective is to develop a predictive model that correlates the bulk dielectric constant of PCC with its critical parameters (cement, aggregate, and air content). Five calibration methods have been developed and evaluated for the C-Probe to measure the dielectric properties of PCC. This evaluation has demonstrated that open, short, Teflon material (OSM) calibration method is the most appropriate one for the C-Probe. The selected calibration method was used to validate the C-Probe fixture for field application by measuring 1.5 x 1.5 m PCC slabs prepared with different mix properties, thicknesses, and induced deterioration. The C-Probe has been proved to detect induced voids in the PCC slabs. In addition, the effect of steel reinforcement on measurements can be mastered by controlling the penetration of electromagnetic (EM) field in the PCC slabs. The effective penetration depth of the EM field for different C-Probe design configuration was optimized by computer simulation. The results have been used to develop a predictive model that correlates the effective penetration depth with the plates' size, separation between them, and the dielectric constant of the PCC under test. Thus, an optimum design for different desired penetration depth was achieved. Two experimental designs were developed to identify the critical parameters that affect the bulk dielectric constant of PCC. A computer simulation was used to identify the significance of each parameter. A predictive model has been developed to correlate the PCC bulk dielectric constant to the critical parameters. The estimated dielectric constant of PCC using the predictive model was correlated to that obtained by other theoretical mixture models; the predictive model has found to correlate well with Looyenga theoretical mixture model. / Ph. D.

Nearly Euclidean Thurston maps are simple generalizations of rational Lattes maps. A Thurston map is called nearly Euclidean if its local degree at each critical point is 2 and it has exactly four postcritical points. We investigate when such a map has the property that the associated pullback map on Teichmuller space is constant. We also show that no Thurston map of degree 2 has constant pullback map. / Ph. D.

Yes / In this work, an analytical study of the electromagnetic propagation in a complex medium-based suspended three-layer coplanar waveguide (CPW) is carried out. The study aims at a numerical calculation of the dominant hybrid mode complex propagation constant in the CPW printed on a bianisotropic substrate. The herein considered bianisotropy is characterized by full 3×3 tensors of permittivity, permeability and magnetoelectric parameters. The study is based on the numerical derivation of the Green's functions of such a complex medium in the spectral domain. The study is carried out using the Full Generalized Exponential Matrix Technique based on matrix- shaped compact mathematical formulations. The Spectral Method of Moments (SMoM) and the Galerkin's procedure are used to solve the resulting homogeneous system of equations. The effect of the chiral and achiral bianisotropy on the complex propagation constant is particularly investigated. Goo d agreements with available data for an anisotropic-medium-based suspended CPW structure are achieved. Various cases of chiral and achiral bianisotropy have been investigated, and particularly, the effect on the dispersion characteristics is presented and compared with cases of isotropic and bianisotropic Tellegen media. / FCT/MEC through national funds and when applicable co-financed by the ERDF, under the PT2020 Partnership Agreement under the UID/EEA/50008/2019 project.

This thesis explores the design of a constant element of architecture over a changing landscape, and the moments created along the way. This exploration takes the form of a bridge and series of towers that travel 50 miles from Seattle, WA to the edge of the Puget Sound, Protection island. It is a pilgrimage, a journey, a structure situated within a suspended time and space. / Master of Architecture

The design of an active-unity power factor correction circuit with variable-hysteresis control for off-line dc-to-dc switching power supplies is described. Design equations relating the boost inductor current ripple to the circuit components selection and circuit performance arc discussed. A computer-aided design program (CADO) is developed to give the optimal circuit components selection. A 500 watt, 300 volt experimental circuit is built to verify the simulation and analysis results. The control-to-output response of the power factor circuit is verified with the experimental results. Design guidelines for the low-frequency feedback network are presented. Small-signal closed-loop responses are measured with an experimental power factor circuit. / Master of Science

This thesis presents the fundamental issues of the digital controlled DC/DC converter. A lot of challenges exist when you introduce the digital control technique into the control of the DC/DC converter, especially with regards to the voltage regulator module. One issue is the limit cycle oscillation problem caused by the quantization effect from the ADC and DPWM of the digital control chip. Another issue is the delay problem coming from the sample-hold effect. In this thesis, the modeling, analysis and design methodology for the constant frequency voltage-mode control is reviewed. A DPWM (Digital Pulse Width Modulator) model is verified in simulation, which shows what effects the digital control brings to the conventional Pulse Width Modulator. In CPES, the constant on-time control concept is introduced into the digital control of the voltage regulator module. This provides a high resolution of DPWM and allows the digital constant on-time voltage-mode control architecture to be proposed. To limit the oscillation amplitude in the digital control structure, the digital constant on-time current-mode control w/ external ramp is further proposed in CPES. To analyze this structure, a describing function model is proposed for the digital constant on-time current-mode control, which takes both the sample-hold effect and the quantization effect into consideration. This model clearly shows the stability problem caused by the sample-hold effect in the current loop. Using larger ramp's slope values, this stability issue can be alleviated. Based on this model, a design methodology is introduced. By properly designing the current loop's ADC resolution and the voltage loop's ADC resolution, the limit cycle oscillation in this structure can be minimized: the digital constant on-time current-mode control will only have the oscillation coming from the sample-hold effect in the current loop, which can be greatly reduced by adding the large slope's external ramp to this structure. Simulation verification for this design methodology is provided to prove the concepts. Based on the proposed model, the compensator design is performed. The motivation for the compensator design is to push the bandwidth while satisfying the stability condition and the dynamic no-limit-cycle oscillation condition. When analyzing the case of one sample per switching cycle, there is a certain amount of delay, which compromises the phase characteristics. Our design also requires a large external ramp because it will reduce the oscillation amplitude in our system. From our model, it is quite obvious that the external ramp must have a slope larger than one time that of inductor current down slope. A slope that is too larger will weaker the phase and limit the bandwidth. When using the normal current-mode compensator, like the 1-pole 1-zero compensator, the phase is dropped too much and the bandwidth will be limited too low. If we use a 2-pole 2-zero compensator, the phase can be boosted. However, in this case, the gain margin requirement from the dynamic no-limit-cycle oscillation condition will make the further improvements on bandwidth impossible. In our design, the one sixth of the switching frequency is achieved. / Master of Science

Clusters of low-performance spacecraft flying in formation may provide enhanced performance over single high-performance spacecraft. This is especially true for remote sensing missions where interferometry or stereographic imaging may provide higher resolution data. The configurations of such formations vary during an orbit due to orbital dynamics, and over longer time scales due to perturbations. Selection of a configuration should be based on overall performance of the formation. In this thesis, performance measures are developed and evaluated based on integration over one orbit. The measures involve the angular separation of spacecraft, the distance between spacecraft, and an area-based measure of the separation of the spacecraft. Numerical techniques are employed to evaluate the performance measures to determine optimal scenarios for two formations. Simplifying assumptions are made to allow a closed-form analytic solution and the results are compared to those obtained numerically. Finally, the sensitivity of the measures to linearized propagation techniques is investigated. / Master of Science

No / This paper discusses the aspect of student support that emerged as a key component of a longitudinal study into the experiences of nurses studying through open learning in the UK. Students engaged in this study were mature learners who were practicing nurses and predominantly, but not exclusively, women. Participants perceived entering higher education as a considerable challenge.

Ce mémoire est consacré à l’analyse du mensonge chez Kant. Or, comme la Métaphysique des moeurs est subdivisée en deux volets, le premier portant sur le droit et le second sur la moralité proprement dite, nous nous sommes proposé d’envisager le mensonge selon ces deux points de vue, en commençant par le second. En nous appuyant sur les textes de Kant qui envisagent le mensonge comme faute morale, les Leçons d’éthique, la Fondation de la Métaphysique des Moeurs, la Doctrine de la Vertu, nous montrons que Kant condamne moralement le mensonge parce qu’en lui-même, le mensonge constitue la plus grave violation du devoir de l’homme envers lui-même : la sincérité. L’homme qui n’est pas sincère, c’est-à-dire qui dit délibérément le contraire de ce qu’il pense non seulement va à l’encontre de la finalité inhérente à la communication, mais aussi, par le mensonge, l’homme renonce à sa personnalité. En renonçant ainsi à sa personnalité, l’homme cesse d’être un homme véritable, c’est-à-dire celui en qui la pensée et le dit coïncident, il devient un semblant d’homme, c’est-à-dire celui qui délibérément dit le contraire de ce qu’il pense. En s’appuyant sur le texte de Kant qui envisage le mensonge au point de vue du droit, D’un prétendu droit de mentir par humanité, nous avons mis en évidence que l’argument central de Kant est de montrer que toute tentative de tolérer un droit de mentir rendrait la société impossible. C’est qu’un droit de mentir condamnerait à jamais l’humanité à l’état de nature, parce que la confiance qu’exige le contrat originel qui marque l’entrée dans l’état de droit n’aurait plus aucun sens. De même, un droit de mentir ruinerait tous les contrats, qui reposent, pour leur effectivité, sur la confiance. Au fond, un droit de mentir est contraire même au droit. Nous avons montré en conclusion de mémoire en quoi la position de Kant restait encore, de nos jours, actuelle. Une grande partie de ce mémoire a été réservée au texte polémique de 1796 D’un prétendu droit de mentir par humanité. Ayant montré en quoi consiste la position de Kant, contrairement à celle de Constant, nous avons analysé les nombreux commentaires qui ont été consacrés à ce texte polémique, qui opposa Kant et Benjamin Consstant, afin de montrer que l’interprétation de la position de Kant sur le mensonge varie selon qu’on revendique exclusivement sa philosophie morale ou sa philosophie du droit. / This essay is dedicated to the analysis of Kant’s thought on the notion of lying. As the Métaphysique des moeurs is divided in two parts, the first dealing with the second on morality, the essay treats the lie through these two angles. Based on Kant’s texts discussing the lie as a moral fault, i.e. the Leçons d’éthique, the Fondation de la Métaphysique des Moeurs and the Doctrine de la Vertu, one can note that Kant morally condemns lying mainly because it constitutes, in itself, the most serious violation of the human’s duty towards himself: sincerity. The individual who is not sincere, that is to say who deliberately says the opposite of what he thinks, not only goes against the inherent purpose of communication but also abandons his personality. In so doing, the human ceases to be a real human, that is to say where his thought and saying coincides, and becomes a semblance of human, namely someone who deliberately says the opposite of what he thinks. Referring to Kant’s treatment of lying from a legal point of view, i.e. D’un prétendu droit de mentir par humanité, one sees the idea that any attempt to tolerate a right to lie would make society impossible. Indeed, a right to lie would forever condemn humanity to a state of nature in that the confidence that is required in the original contract, marking the transition to a rule of law, would loss its meaning. In addition, a right to lie would ruin all contracts that rest, for their efficiency, on confidence. In other words, a right to lie is also contrary to law. The essay ends by showing how Kant’s position still holds meaning in the present world. A major part of this essay focuses on the controversial text of 1796, entitled D’un prétendu droit de mentir par humanité. While having shown of what consists Kant’s position, contrary to that of Constant, we analyzed many commentaries which were devoted to this polemical text, opposing Kant and Benjamin Constant, in order to show that the interpretation of the position of Kant on lying varies according to whether his moral philosophy or his philosophy of the right is exclusively mobilized.