Australia is one of the most popular countries for immigrants to settle. Many highly qualified Indians from India have made Australia their home, and they hold important positions in the Australian work-force. The Australian work-force now consists not only of employees from different countries, but also of parents who try to balance their work roles and family roles simultaneously. For dual-earner families this can be difficult and could lead to increased job stress and work family conflict. Due to these cultural and gender differences, experiences in the paid work-force cannot be assumed to be the same for all employees. The purpose of this research was to investigate the role of culture and gender among working professionals in Australia and to study the interactional patterns within dual-earner couples in the Australian work-force. This was exploratory research and was conducted using three studies. All studies were cross-sectional, and qualitative as well as quantitative measures were used for data collection. In the first study data were collected from matched pairs of 10 Australian and 10 Indian born mothers who were employed in the Australian work-force. Interviews were conducted and responses to the interview were recorded. Results suggested some significant differences in job stress, with Australian mothers experiencing more job stress than Indian mothers. Further, interview results indicated that women from both cultures were responsible for most of the household work. Study two of the thesis combined culture and gender to investigate job satisfaction, work stress and work family conflict among Australian men and women working in the Australian work-force (N = 58). A 2 X 2 ANOVA was used for this. There were no cultural differences found among men and women of both cultures on measures of job satisfaction, work-family conflict and family-work conflict. However, cultural differences were observed on the job stress scale with Australian men and women experiencing more job stress than Indian men and women. There were also significant gender differences in job stress, workfamily- conflict and family-work conflict. Australian men and Indian men reported higher family-work conflict. Results of this study revealed significant gender differences and therefore, the third study was designed to investigate these gender differences further. Study three investigated the role of gender and work stress variables through crossover and spillover research. Many gender differences in predictors of fatigue, job stress and dyadic adjustment were found among couples both working in white collar professions. This study too strengthened the traditional gender role with women experiencing higher job stress and family-work conflict. It is suggested that these findings contribute to the work-stress literature in three ways. Findings confirm that gender, rather than culture, are responsible for differences among immigrants in their perception of job satisfaction, work-family conflict and family-work conflict. Findings also confirm the traditional gender role of women, who are responsible for most domestic household work, and also demonstrate that increase in work-family conflict and family-work conflict contributes to an increase in job stress among dual-earner couples. This research has provided an insight into factors contributing to both crossover and spillover among Australian dual earner professionals, an area which has not received much attention. / http://proxy.library.adelaide.edu.au/login?url= http://library.adelaide.edu.au/cgi-bin/Pwebrecon.cgi?BBID=1365266 / Thesis (Ph.D.) - University of Adelaide, School of Psychology, 2009

Australia is one of the most popular countries for immigrants to settle. Many highly qualified Indians from India have made Australia their home, and they hold important positions in the Australian work-force. The Australian work-force now consists not only of employees from different countries, but also of parents who try to balance their work roles and family roles simultaneously. For dual-earner families this can be difficult and could lead to increased job stress and work family conflict. Due to these cultural and gender differences, experiences in the paid work-force cannot be assumed to be the same for all employees. The purpose of this research was to investigate the role of culture and gender among working professionals in Australia and to study the interactional patterns within dual-earner couples in the Australian work-force. This was exploratory research and was conducted using three studies. All studies were cross-sectional, and qualitative as well as quantitative measures were used for data collection. In the first study data were collected from matched pairs of 10 Australian and 10 Indian born mothers who were employed in the Australian work-force. Interviews were conducted and responses to the interview were recorded. Results suggested some significant differences in job stress, with Australian mothers experiencing more job stress than Indian mothers. Further, interview results indicated that women from both cultures were responsible for most of the household work. Study two of the thesis combined culture and gender to investigate job satisfaction, work stress and work family conflict among Australian men and women working in the Australian work-force (N = 58). A 2 X 2 ANOVA was used for this. There were no cultural differences found among men and women of both cultures on measures of job satisfaction, work-family conflict and family-work conflict. However, cultural differences were observed on the job stress scale with Australian men and women experiencing more job stress than Indian men and women. There were also significant gender differences in job stress, workfamily- conflict and family-work conflict. Australian men and Indian men reported higher family-work conflict. Results of this study revealed significant gender differences and therefore, the third study was designed to investigate these gender differences further. Study three investigated the role of gender and work stress variables through crossover and spillover research. Many gender differences in predictors of fatigue, job stress and dyadic adjustment were found among couples both working in white collar professions. This study too strengthened the traditional gender role with women experiencing higher job stress and family-work conflict. It is suggested that these findings contribute to the work-stress literature in three ways. Findings confirm that gender, rather than culture, are responsible for differences among immigrants in their perception of job satisfaction, work-family conflict and family-work conflict. Findings also confirm the traditional gender role of women, who are responsible for most domestic household work, and also demonstrate that increase in work-family conflict and family-work conflict contributes to an increase in job stress among dual-earner couples. This research has provided an insight into factors contributing to both crossover and spillover among Australian dual earner professionals, an area which has not received much attention. / http://proxy.library.adelaide.edu.au/login?url= http://library.adelaide.edu.au/cgi-bin/Pwebrecon.cgi?BBID=1365266 / Thesis (Ph.D.) - University of Adelaide, School of Psychology, 2009

Made available in DSpace on 2014-06-11T19:23:39Z (GMT). No. of bitstreams: 0 Previous issue date: 2007-09-06Bitstream added on 2014-06-13T18:51:01Z : No. of bitstreams: 1 ferreira_ab_me_ilha.pdf: 5542320 bytes, checksum: ac4ab4f7279192ce563639cce31eb895 (MD5) / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) / Desenvolveu-se neste trabalho a implementação computacional de um algoritmo genético. Este se constituiu de uma população inicial sobre a qual agem quatro operadores fundamentais: seleção, “crossover”, substituição e mutação, e produz uma nova população. Sobre a qual agem novamente os operadores genéticos, e assim sucessivamente produzindo uma seqüência de populações. O operador seleção foi implementado em três algoritmos básicos: roda da roleta, amostragem estatística universal e torneio. O “crossover” também foi desenvolvido em algumas opções: um ponto, dois pontos, múltiplos pontos, e uniforme. A substituição de indivíduos da população pelos filhos ocorre de três maneiras básicas: dos pais, dos menos aptos, e dos indivíduos sorteados aleatoriamente. A mutação ocorre de apenas uma maneira. Inicialmente, o algoritmo genético foi executado em computador de maneira seqüencial. Resolveu-se um conjunto de problemas de otimização multidimensional e também o Problema do Caixeiro Viajante (TSP – Traveler Salesman Problem). Fez-se um estudo paramétrico dos vários parâmetros que aparecem no algoritmo genético, tais como: tamanho da população, número de gerações, taxa de seleção, probabilidade de mutação, e taxa de elitismo. No caso de problemas de otimização multidimensional a representação do cromossomo de cada indivíduo é binária, já no caso do TSP a representação é inteira decimal. Em ambos os casos da otimização multidimensional e do TSP também foi utilizada a técnica de hill-climbing visando aumentar a taxa de convergência da solução. A técnica de janelamento foi utilizada somente no caso de otimização multidimensional, também visando aumentar a taxa de convergência. Posteriormente, o algoritmo genético foi executado também em processamento computacional paralelo,... / It was developed in this work the computational implementation of a genetic algorithm. That is constituted of an initial population upon which act four basic operators: selection, crossover, substitution and mutation, producing a new population. Upon which act again the genetic operators, and thus, successively, producing a sequence of populations. The operator selection was implemented in three basic algorithms: roulette wheel, stochastic universal sampling, and tournament. The crossover also was developed in some options: one point, two points, several points, and uniform. Substitution of individuals from the population by the newborns happens in three basic ways: the fathers, the less apt, and the individuals sorted randomly. Mutation happens in only one manner. Initially, the genetic algorithm was processed sequentially in the computer. It was solved a set of multidimensional optimization problems and also the Traveler Salesman Problem - TSP. It was done a parametric study of the several parameters that appear in the genetic algorithm, such as: population size, number of generations, selection rate, mutation probability, and elitism rate. In the case of multidimensional optimization problems the chromosome representation of each individual is binary, but in the case of TSP the representation is integer decimal. In both cases of multidimensional optimization and TSP also it were used the hill-climbing technique aiming to increase the solution convergence rate. The windowing technique was used just for the multidimensional optimization case, also aiming to increase the convergence rate. Lately, the genetic algorithm was also performed in a computational parallel processing mode, using several computers linked by a net. In each computer it was executed one genetic algorithm upon a local population. The interaction among several populations was done through the migration ...(Complete abstract, click electronic access below)

The use of molecular markers to predict non-tested materials in field trials has been extensively employed in breeding programs. The genomic prediction of single crosses is a promising approach in maize breeding programs as it reduces selection cycle and permits the selection of promising crosses. Accounting for non-additive effects on genomic prediction can increase prediction accuracy of models depending on the traits genetic architecture. Genomic prediction was first developed for single environments andrecently extended to exploit the genotype by environment interactions for prediction of non-evaluated individuals. The employment of multi-environment genomic models is advantageous in several aspects and has enabled significant higher prediction accuracies than single environment models. However, only a small number of studies regarding the inclusion of non-additive effects in these models are reported. Moreover, the genotype by environment interaction complexity can largely impact the prediction accuracyof these models. Thus, the objectives were to i)evaluate the contribution of additive and non-additive (dominance and epistasis) effects for the prediction of agronomical traits with different genetic architecture in tropical maize single-crosses grown under two nitrogen regimes (ideal and stressing), and ii)verify the impact of the genotype by environment interaction complexity, and the inclusion of dominance deviations, on the prediction accuracy of hybrids grain yield using a multi-environment prediction model. For this, we used phenotypic and genotypic data of 906 single-crosses evaluated during two years, at two locations, under two nitrogen regimes, totaling eight contrasting environments (combination of year x locations x nitrogen regimes). The traits considered in the study were grain yield, ear, and plant height. The results regarding the inclusion of additive and non-additive effects (dominance and epistasis) in genomic prediction models suggest that non-additive effects play an important role instressing conditions, having a high, medium and low contribution for phenotypic expression of grain yield, plant height, and ear height, respectively. The inclusion of dominance deviations in multi-environment prediction model increases the prediction accuracy. Furthermore, a linear relationship between genotype by environment complexity and prediction accuracywas found. / O uso de marcadores moleculares para a predição do fénotipo de materiais não testados em campo tem sido amplamente utilizado em programas de melhoramento genético de plantas. A predição genômica de hibridos simples é uma ferramenta promissora no melhoramento genético do milho, pois além da redução do tempo necessário para cada ciclo de seleção, ela pode ser utilizada para a identificação de cruzamentos promissores. Dependendo da característica em estudo, a inclusão de efeitos não aditivos em modelos de predição genômica pode aumentar significativamente sua acurácia de predição. Além disso, estes modelos foram inicialmente propostos para a predição de materiais em apenas um único ambiente. Atualmente, foram expandidos para considerarem os efeitos da interação genótipos por ambiente. O uso de tais modelos têm se mostrado vantajoso em vários aspectos, um deles é o considerável aumento da acurácia de predição de novos materiais. Contudo, ainda são escassos estudos envolvendoa inclusão de efeitos não aditivos nesses modelos. Ademais, fatores como a complexidade da interação genótipo por ambiente pode influenciar de maneira significativa a acurácia preditiva de modelos considerando múltiplos ambientes. Portanto, os objetivos foram: i)avaliar a contribuição de efeitos aditivos e não aditivos (dominância e epistasia) para a predição de caracteres agronômicos com diferentes arquiteturas genéticas em cruzamentos simples de milho tropical cultivados sob dois níveis de disponibilidade de nitrogênio (ideal e estressado), e ii)verificar o impacto da complexidade da interação genótipo por ambiente, e da inclusão de desvios de dominância na acurácia de predição de modelos multi-ambientes para a predição da produtividade grãos de híbridos simples de milho. Para isto, foram utilizados os dados fenótipicos e genotípicos de 906 híbridos simples de milho avaliados durante dois anos, em dois locais, sob dois níveis de adubação nitrogenada, totalizando oito ambientes distintos (combinação ano xlocal x nivel de adubação nitrogenada). Os caracteres estudados foram produtividade de grãos, altura de espiga, e plantas. Os resultados acerca da inclusão de efeitos aditivos e não aditivos (dominancia e epistasia) sugerem que, efeitos não aditivos são mais importantes sob condições de estresse, contribuem de maneira significativa para produtividade grãos, de modo intermediário para altura de plantas e possuem pouca importância para altura de espiga. A inclusão de desvios de dominância em modelos de predição multi-ambientes aumentou de forma significativa a acurácia de predição. Além disto, observou-se uma relação linear entre complexidade da interação genótipos por ambientes e acurácia preditiva do modelo.

La recombinaison méiotique via les Crossing-Overs (COs) est le principal mécanisme permettant le brassage de la diversité génétique. Cependant, le nombre et la position des COs entre paires de chromosomes homologues sont strictement régulés, limitant la séparation des loci en sélection variétale. Dans le cas du colza B. napus, l’utilisation d’allotriploïdes (AAC, 2n=3x=29), issus du croisement entre le colza (AACC, 2n=4x=38) et l’un de ses progéniteurs B. rapa (AA, 2n=2x=20), permet d’augmenter considérablement le nombre de COs entre chromosomes homologues A. L’objectif de cette étude était de déterminer les conséquences d’une telle variation sur la distribution des COs le long des chromosomes ainsi que d’identifier des facteurs régulant ce phénomène. Suite à la production et à la caractérisation cytogénétiques d’hybrides F1 présentant différents caryotypes, la recombinaison homologue a été évaluée par des analyses génétiques via des marqueurs SNPs physiquement ancrés sur l’ensemble duNous avons montré que l’addition du génome C chez les allotriploïdes conduit toujours à (1) la formation de COs surnuméraires, dont le nombre varie fonction des méioses mâle/femelle et du fond génétique, (2) une modification des profils de recombinaison, notamment au voisinage des centromères, et (3) une réduction de l’intensité d’interférence. De plus, nous avons révélé que le contrôle génétique de ces variations est imputé à des chromosomes C spécifiques et aurait divergé dans un contexte polyploïde. Nous avons donc identifié un levier permettant d’optimiser le brassage de la diversité gén / Meiotic recombination via crossovers (COs) is the main mechanism responsible for mixing genetic diversity. However, the number and position of COs between the pairs of homologous chromosomes are strictly regulated, limiting the loci separation in plant breeding. In the case of the rapeseed B. napus, the use of allotriploids (AAC, 2n=3x=29), resulting from the cross between rapeseed (AACC, 2n=4x=38) and one of its progenitors B. rapa (AA, 2n=2x=20), allows a substantial increase of the number of COs between homologous A chromosomes. The objective of this study was to determine the consequences of such a variation on the distribution of COs along the chromosomes and to identify factors regulating this phenomenon. Following the production and cytogenetic characterization of F1 hybrids with different karyotypes, homologous recombination was assessed by genetic analyzes via SNPs markers physically anchored on the whole A genome.We showed that the additional C genome in allotriploids always leads to (1) the formation of extra COs, for which the number depends on the male/female meiosis and the genetic background, (2) the modification of the recombination landscapes, especially in the vicinity of centromeres, and (3) the decrease of CO interference. In addition, we revealed that the genetic control of these variations is assigned to specific C chromosomes and could have evolved in a polyploid context. We have therefore identified a way to optimize the shuffling of genetic diversity in rapeseed breeding.

The aim of the thesis is an upgrading of a railway station Jaroměř to increase the speed of passing trains, improving safety and comfort of passengers during getting on and getting off and access to trains. The upgrading includes design of new structures. Platform will be upgrading at the height of 550 mm above the top of rail and will meet the requirement for wheelchair access underpass. Drainage is designed as well. Upgrading will be done with applicable laws and standards.

L'utilisation de matériaux organiques pour l'électronique de spin suscite actuellement un fort intérêt. En effet, le long temps de diffusion de spin, la possibilité de manipuler l'état de spin d'une molécule ainsi que son interaction avec une surface magnétique offrent a priori de nouvelles possibilités pour la réalisation de nouveaux dispositifs d'électronique de spin. L'incorporation dans des dispositifs de molécules possédant deux états de spin nécessite la compréhension du phénomène de transition de spin une fois que les molécules sont en contact direct avec des surfaces métalliques.L'objectif de ce travail de thèse est l'étude des interfaces molécule-métal. Dans une première partie, nous avons étudié le magnétisme d'interfaces ferromagnétique-organique en utilisant différentes molécules et différents métaux ferromagnétiques. Nous nous sommes particulièrement intéresses a l'anisotropie magnétique dans ces systèmes. Dans une deuxième partie, nous avons étudié le phénomène de transition de spin moléculaire en contact avec une surface métallique. La spectroscopie d'absorption et le dichroïsme magnétique des rayons x ont d'abord permis de mettre en évidence cette transition à l'échelle globale ensuite, nous avons utilise la microscopie a effet tunnel pour étudier ce phénomène à l'échelle moléculaire dans un cristal 2d de molécule. Nous avons notamment observe la dynamique de la transition sous irradiation laser pour la première fois à l'échelle moléculaire. / The use of organic materials in spintronic devices has recently raised a lot of interest. Large spin diffusion time in organic materials along with the flexibility of manipulating the spin state of the molecule and their interaction with the ferromagnetic metal electrode offers new functionalities in molecular spintronics. Understanding the spin crossover (sco) phenomenon for spin active molecules attached to metallic substrate is also necessary for a primary step towards device application.The main goal of the thesis work was to study these molecule—metal interfaces. In one part, we have studied the magnetism of the organic—ferromagnetic interface with different molecules and different ferromagnetic metals. The study was mainly focused on the magnetic anisotropy at the molecule-metal interfaces. In other part, we focused on the spin crossover phenomena of sco molecules attached to metallic substrates. X—ray absorption spectroscopy and magnetic circular dichroism techniques enabled us to study globally the spin crossover phenomenon. Using scanning tunneling microscopy we were able to study the sco phenomena at the single molecular level in a 2d crystal of molecules on a metal substrate. We have then studied locally the dynamics of the spin transition phenomenon upon laser exposure on a single 2d layer molecular crystal.

No description available.

No description available.

No description available.