No description available.

No description available.

No description available.

<p>An experimental investigation was conducted to analyze the effectiveness of repairing and retrofitting the intersections of flanged concrete block shear walls using surface-bonded fiber-reinforced polymer (FRP) laminates for seismic load applications. A total of 18 specially designed flange-web intersecting wall assemblages were tested using 5 different schemes. Tests included wall intersections reinforced with unidirectional FRP with the fibers oriented perpendicular to loading direction (90°), parallel to loading direction (0°) and bi-directional (90°/0°), (90°/0°)2 and (45°/135°) to applied load direction. The behaviour of each wall specimen is discussed with respect to its failure mode, strength and deformation characteristics. Results showed that the laminates significantly increased the shear strength of concrete block shear walls junction. In addition, the fiber orientation influenced the failure mode, strength and stiffness. Moreover, depending on the fiber orientation, a significant enhancement to the post-peak load energy absorption capacity of the web-flange intersection can occur. The improved post-peak behaviour addressed the benefits of retrofitting concrete block wall intersections for seismic load applications. The FRP-retrofitted specimens were capable of reaching between 90% to 390% increase in strength compared to the umetrofitted specimen constructed with traditional steel joint reinforcement.</p> / Thesis / Master of Engineering (MEngr)

<p> Four experiments were conducted to examine the visual regulation of manual aiming under visually displaced conditions. A secondary purpose of these studies was to examine potential gender differences in behaviour following prismatic displacement. The initial experiment was designed to test a monocular switch of vision as a method of presenting the visually displaced information. This experiment also provided an opportunity to explore manual and ocular asymmetries. The monocular switch had no major influence on the terminal accuracy of the movements. Therefore. the methodology was employed to present visually displaced information in the three subsequent experiments. The second experiment was designed to present visually displaced information at different times during the aiming movements. while the third experiment was designed to remove the displaced information during the movements. In a fourth experiment. a real time movement analysis procedure was used to introduce visual displacement at various kinematic markers. In Experiments 2, 3, and 4. the early presentation and removal of the visually displaced information had the most influence on terminal accuracy. However. these effects were not consistent across gender. Male participants executed their movements based on the information presented prior to the movements. In contrast. female participants were more influenced by the information received during the initial portions of the movements. The results support models of manual control that emphasize the importance of vision in the early portions of the movement for the correction of trajectory errors. The effects involving gender suggest that gender should be included as an independent variable in future research. </p> / Thesis / Master of Science (MSc)

Background: Since the 1980s, there has been a growing interest in research to focus on positive mental health instead of narrowing attention toward risk factors and to foster resilience instead of treating trauma. There is substantial empirical evidence that despite being exposed to the same risk; individuals react differently to the same stimuli. The ability of some people to successfully cope and adapt despite adversity is what constitutes resilience. In the context of forced migration, resilience research examines the elements that ameliorate wellbeing and positive adjustment rather than focusing on the pathological consequences of trauma. However, little is known about how the construct of resilience is conceptualized within the field of forced migration research. This research aims to critically appraise and map the existing literature on resilience in the forced migration population, and to analyze how the concept of resilience is defined, operationalized, and applied in refugee research. Methods: Arksey and O’Malley scoping review framework was followed to search 5 online databases. Numerical and thematic analysis were both conducted to examine the breadth of the literature and to chart the relevant data. Results: A total of 20 studies were selected for the scoping review. The findings included a description of the literature regarding geographic distribution, recruited methods, and targeted populations. In addition, the results investigated definitions of resilience, measures used to operationalize resilience, the relationship between resilience and mental health illnesses, internal and external protective factors contributing to fostering resilience processes, and resilience across cultures and languages. Conclusion: There is an increase in interest to understand the concept of resilience through synthesizing both qualitative and quantitative data. However, longitude and evaluation studies remain the exception. Further research is needed to validate resilience instruments across cultures and languages. The interactions between mental health illnesses and resilience should be better understood in the context of forced migration as well. / Thesis / Master of Health Sciences (MSc)

Aluminum and metal-oxide powders were mixed using mechanical alloying. Exothermic displacement reactions could be initiated in the powders either by mechanical alloying alone or by heat treating the mechanically alloyed powders. Exponential relationships developed between the initiation time of the reaction and the mechanical alloying charge ratio. The exponential relationships were the result of changes in the intensity and quantity of collisions occurring during mechanical alloying. Differential thermal analysis of the mechanically alloyed powders indicated that increased milling time inhibited the initiation of the displacement reactions. It is believed that the reactions were inhibited because of heat dissipation from reacting oxide particles in the surrounding metal. Determining the effects of mechanical alloying on displacement reactions will lead to a more thorough understanding of the kinetics of mechanical alloying. Reacted powders were densified by uniaxial compaction and extrusion. Metallographic analysis of the reacted specimens confirmed the findings of the thermal analysis. Increased mechanical alloying inhibited the chemical reactions. Densified specimens from longer-milled mechanically alloyed specimens showed finer, more uniformly dispersed reaction products. These samples also showed increased mechanical properties as a result of their finer microstructure. Current particle strengthening models were used to accurately predict room temperature properties. Because of the fine microstructures produced, it may be possible to use similar techniques to yield new high-temperature aluminum alloys. / Ph. D.

Many airborne diseases such as Coronavirus variants are spread from person to person by indoor air movement. This is of particular concern in healthcare environments such as hospitals. There is a significant body of research that suggests that indoor ventilation strategies such as personalized ventilation systems my help reduce the spread of these viruses. While there are studies related to the efficacy of air movement from personalized ventilation, there are very few studies that explore how best to integrate these systems into the design process for hospital patient rooms. This study focuses on how to integrate personalized ventilation (PV) and displacement ventilation (DPV) systems into patient room design. The aims of this study are to first, develop a procedure using the Choosing By Advantages approach to make design decisions related to the implementation for personalized ventilation and displacement ventilation in private and semi-private patient rooms to prevent cross-infection. Secondly, using this approach, design solutions are proposed for patient room layouts with PV and DPV in different locations. The study proposes the best locations and components of the PV and DPV ventilation air supply and exhaust. Further practical models/simulation rooms are required to test the impact of PV systems on patients' and nurses' daily activities. / Master of Science / Many airborne diseases such as Coronavirus variants are spread from person to person by indoor air movement. This is of particular concern in healthcare environments such as hospitals. New personalized ventilation systems place ventilation air directly at the patient bed and consequently can reduce the spread of these viruses by effectively managing in-room air movement. This study explores how best to make design decisions for the implementation of personalized ventilation systems into hospital patient rooms. Applying this decision-making approach, design solutions are proposed that integrate personalized ventilation with commonly used displacement ventilation in patient rooms.

As specialized materials are developed for various applications, it becomes desirable to test them under adverse conditions, such as at elevated temperatures and in harsh environments. It is increasingly important that sensors be developed to meet the growing needs of research and industry. The ability of sapphire to withstand elevated temperatures and many chemically harsh environments has long been recognized. However, currently available sapphire fiber possesses poor optical quality and is not available with a cladding. It has found use in a variety of temperature sensors, but the investigation of sapphire-based strain and displacement sensors has been limited. The primary development of a white-light Michelson interferometer that utilizes a sapphire fiber sensing head is presented in this thesis. Development includes efforts to combat the poor optical quality of the sapphire fiber, minimize polarization mode fading, and preferentially excite the fundamental mode of the sapphire fiber. This thesis demonstrates the feasibility of fabricating a Michelson white-light interferometer capable of measuring displacements in environments ranging from room temperature to 800 degrees Celsius. The sensor developed in this work is capable of measuring displacements exceeding 6.4 millimeters at room temperature, and exceeding 1 millimeter at 800 degrees Celsius. This thesis also presents the application of this sensor to the alignment of a sapphire-fiber based Fabry-Perot sensor. This technique allows the Fabry-Perot sensor to be aligned so that usable fringes are always obtained. Alignment of the sapphire-fiber based Fabry-Perot sensors has been considered prohibitively difficult. / Master of Science

Research on unit load stability aids manufacturing facilities in selecting the most efficient load stabilizer when shipping their products to market. This study's objective was to compare the performance a variety of different commonly used load stabilizers to stretch hooding. Stretch hooding is a method of load stabilization in which a tubular film is heat sealed at the top, stretched by four mechanical arms to a desired width, pulled down over the unit load. The film is slowly released as the arms descend, and is released under the pallet. 400ga stretch hooding, 80ga and 63ga stretch wrap and strapping were tested. Twenty unit loads for both vibration and impact testing were used, with 5 replications per load stabilizer. Container displacement and pallet-container displacement were measured, and the number of tares in the load stabilizer film, on the corners of the test units, after testing, was noted. Container displacement was significantly greater during impact testing than in vibration testing. Strapping was the most effective stabilizer during vibration testing because of its ability to restrict vertical displacement. The stretch hooding was the most effective stabilizer during impact testing because of its ability to restrict horizontal displacement. / Master of Science