Nitrogen-doped (N-doped) porous carbons have drawn increasing attention due to their high activity for electrochemical catalysis, and high capacity for lithium-ion (Li-ion) batteries and supercapacitors. So far, the controlled synthesis of N-enriched ordered mesoporous carbons (N-OMCs) for Li-ion batteries is rarely reported due to the lack of a reliable nitrogen-doping protocol that maintains the ordered mesoporous structure. In order to realize this, in this work, ordered mesoporous carbons with controllable N contents were successfully prepared by using melamine, F127 and phenolic resin as the N-source, template and carbon-source respectively via a solvent-free ball-milling method. The as-prepared N-OMCs which showed a high N content up to 31.7 wt% were used as anodes for Li-ion batteries. Remarkably, the N-OMCs with an N content of 24.4 wt% exhibit the highest reversible capacity (506 mA h g−1) even after 300 cycles at 300 mA g−1 and a capacity retention of 103.3%. N-OMCs were also used as electrode materials in supercapacitors and a capacity of 150 F g−1 at 0.2 A g−1 with stable cycling up to 2500 times at 1 A g−1 was achieved. These attractive results encourage the design and synthesis of high heteroatom content ordered porous carbons for applications in the field of energy storage and conversion.

No description available.

The present thesis is to be brought into line with the current need for alternative and sustainable approaches toward energy management and materials design. In this context, carbon in particular has become the material of choice in many fields such as energy conversion and storage. Herein, three main topics are covered: 1)An alternative synthesis strategy toward highly porous functional carbons with tunable porosity using ordinary salts as porogen (denoted as “salt templating”) 2)The one-pot synthesis of porous metal nitride containing functional carbon composites 3)The combination of both approaches, enabling the generation of highly porous composites with finely tunable properties All approaches have in common that they are based on the utilization of ionic liquids, salts which are liquid below 100 °C, as precursors. Just recently, ionic liquids were shown to be versatile precursors for the generation of heteroatom-doped carbons since the liquid state and a negligible vapor pressure are highly advantageous properties. However, in most cases the products do not possess any porosity which is essential for many applications. In the first part, “salt templating”, the utilization of salts as diverse and sustainable porogens, is introduced. Exemplarily shown for ionic liquid derived nitrogen- and nitrogen-boron-co-doped carbons, the control of the porosity and morphology on the nanometer scale by salt templating is presented. The studies within this thesis were conducted with the ionic liquids 1-Butyl-3-methyl-pyridinium dicyanamide (Bmp-dca), 1-Ethyl-3-methyl-imidazolium dicyanamide (Emim-dca) and 1 Ethyl 3-methyl-imidazolium tetracyanoborate (Emim-tcb). The materials are generated through thermal treatment of precursor mixtures containing one of the ionic liquids and a porogen salt. By simple removal of the non-carbonizable template salt with water, functional graphitic carbons with pore sizes ranging from micro- to mesoporous and surface areas up to 2000 m2g-1 are obtained. The carbon morphologies, which presumably originate from different onsets of demixing, mainly depend on the nature of the porogen salt whereas the nature of the ionic liquid plays a minor role. Thus, a structural effect of the porogen salt rather than activation can be assumed. This offers an alternative to conventional activation and templating methods, enabling to avoid multiple-step and energy-consuming synthesis pathways as well as employment of hazardous chemicals for the template removal. The composition of the carbons can be altered via the heat-treatment procedure, thus at lower synthesis temperatures rather polymeric carbonaceous materials with a high degree of functional groups and high surface areas are accessible. First results suggest the suitability of the materials for CO2 utilization. In order to further illustrate the potential of ionic liquids as carbon precursors and to expand the class of carbons which can be obtained, the ionic liquid 1-Ethyl-3-methyl-imidazolium thiocyanate (Emim-scn) is introduced for the generation of nitrogen-sulfur-co-doped carbons in combination with the already studied ionic liquids Bmp-dca and Emim-dca. Here, the salt templating approach should also be applicable eventually further illustrating the potential of salt templating, too. In the second part, a one-pot and template-free synthesis approach toward inherently porous metal nitride nanoparticle containing nitrogen-doped carbon composites is presented. Since ionic liquids also offer outstanding solubility properties, the materials can be generated through the carbonization of homogeneous solutions of an ionic liquid acting as nitrogen as well as carbon source and the respective metal precursor. The metal content and surface area are easily tunable via the initial metal precursor amount. Furthermore, it is also possible to synthesize composites with ternary nitride nanoparticles whose composition is adjustable by the metal ratio in the precursor solution. Finally, both approaches are combined into salt templating of the one-pot composites. This opens the way to the one-step synthesis of composites with tunable composition, particle size as well as precisely controllable porosity and morphology. Thereby, common synthesis strategies where the product composition is often negatively affected by the template removal procedure can be avoided. The composites are further shown to be suitable as electrodes for supercapacitors. Here, different properties such as porosity, metal content and particle size are investigated and discussed with respect to their influence on the energy storage performance. Because a variety of ionic liquids, metal precursors and salts can be combined and a simple closed-loop process including salt recycling is imaginable, the approaches present a promising platform toward sustainable materials design. / Die vorliegende Arbeit basiert auf der Notwendigkeit für eine alternative und nachhaltige Energiewirtschaft sowie alternativer Herstellungsmethoden der damit verbundenen Materialien. Hierbei kommt besonders Kohlenstoffen und kohlenstoffbasierten Systemen eine hohe Bedeutung zu. Im Rahmen der Dissertation wurden drei Ansätze verfolgt, die zu der Entwicklung alternativer Strategien zur Herstellung poröser Heteroatom-enthaltender Kohlenstoffe und deren Komposite beitragen. Die Materialien wurden des Weiteren für die CO2 Nutzung sowie Energiespeicherung in Form von Superkondensatoren getestet. Allen Materialien ist gemeinsam, dass sie ausgehend von ionischen Flüssigkeiten, Salze mit einem Schmelzpunkt unterhalb von 100 °C, als Kohlenstoffvorstufe durch Hochtemperaturverfahren hergestellt wurden. Im ersten Teil wird ein alternatives und nachhaltiges Verfahren zur Herstellung hochporöser Stickstoff und Stickstoff-Bor-haltiger Kohlenstoffe vorgestellt. Bei dieser als „Salztemplatierung“ bezeichneten Methode werden herkömmliche Salze als Porogen verwendet. Damit sind sehr hohe Oberflächen erreichbar, die neben der Porengröße und dem Porenvolumen durch die Variation der Salzspezies und Salzmenge einstellbar sind. Dies bietet gegenüber herkömmlichen Templatierungsverfahren den Vorteil, dass das Salz nach erfolgter Karbonisierung der ionischen Flüssigkeit in Anwesenheit der nicht karbonisierbaren Salzspezies einfach mit Wasser auswaschbar ist. Hierbei ist ein Recyclingprozess denkbar. Bei hohen Synthesetemperaturen werden graphitische, bei niedrigen hochfunktionalisierte, polymerartige Produkte erhalten. Letztere erwiesen sich als vielversprechende Materialien für die CO2 Nutzung. Unter Verwendung einer bisher nicht eingesetzten ionische Flüssigkeit konnte weiterhin die Einführung von Schwefel als Heteroatom ermöglicht werden. Im zweiten Teil wird eine Templat-freie Einschrittsynthese von porösen Kompositen aus Metallnitrid Nanopartikeln und Stickstoff-dotiertem Kohlenstoff vorgestellt. Die Materialien werden ausgehend von einer Lösung aus einer ionischen Flüssigkeit und einem Metallvorläufer hergestellt, wobei die ionische Flüssigkeit sowohl als Kohlenstoffvorläufer als auch als Stickstoffquelle für die Metallnitride dient. Der Metallgehalt, das Metallverhältnis in ternären Nitriden und die Oberfläche sind über den Anteil des Metallvorläufers einstellbar. Schließlich werden beide Ansätze zur Salztemplatierung von den Kompositen kombiniert. Dadurch wird die Einschrittsynthese von Kompositen mit einstellbarer Oberfläche, Zusammensetzung, Partikelgröße und Morphologie ermöglicht. Diese Materialien wurden schließlich als Elektroden für Superkondensatoren getestet und der Einfluss verschiedener Parameter auf die Leistungsfähigkeit untersucht. Aufgrund verschiedener Kombinationsmöglichkeiten von ionischen Flüssigkeiten, Metallvorläufern und Salzen, stellen die hier präsentierten Ansätze eine vielversprechende Plattform für die nachhaltige Materialsynthese dar.

In order to improve the performance and fundamental understanding of conducting polymers, development of new nanotechnologies for engineering aggregated states and morphologies is one of the central focuses for conducting polymers. In this work, we demonstrated an interfacial engineering method for the rational synthesis of a two-dimensional (2D) polyaniline (PANI) nano-array and its corresponding nitrogen-doped porous carbon nanosheets. Not only was it easy to produce a sandwich-like 2D morphology, but also the thickness, anchored ions and produced various metal phosphides were easily and rationally engineered by controlling the composition of the aqueous layer. The novel structural features of these hybrids enabled outstanding electrochemical capacitor performance. The specific capacitance of the as-produced diiron phosphide embedded nitrogen-doped porous carbon nanosheets was calculated to be as high as 1098 F g−1 at 1 A g−1 and an extremely high specific capacitance of 611 F g−1 at 10 A g−1, outperforming state-of-the-art performance among porous carbon and metal-phosphide-based supercapacitors. We believe that this interfacial approach can be extended to the controllable synthesis of various 2D material coupled sandwich-like hybrid materials with potential applications in a wide range of areas.

Nitrogen-doped (N-doped) porous carbons have drawn increasing attention due to their high activity for electrochemical catalysis, and high capacity for lithium-ion (Li-ion) batteries and supercapacitors. So far, the controlled synthesis of N-enriched ordered mesoporous carbons (N-OMCs) for Li-ion batteries is rarely reported due to the lack of a reliable nitrogen-doping protocol that maintains the ordered mesoporous structure. In order to realize this, in this work, ordered mesoporous carbons with controllable N contents were successfully prepared by using melamine, F127 and phenolic resin as the N-source, template and carbon-source respectively via a solvent-free ball-milling method. The as-prepared N-OMCs which showed a high N content up to 31.7 wt% were used as anodes for Li-ion batteries. Remarkably, the N-OMCs with an N content of 24.4 wt% exhibit the highest reversible capacity (506 mA h g−1) even after 300 cycles at 300 mA g−1 and a capacity retention of 103.3%. N-OMCs were also used as electrode materials in supercapacitors and a capacity of 150 F g−1 at 0.2 A g−1 with stable cycling up to 2500 times at 1 A g−1 was achieved. These attractive results encourage the design and synthesis of high heteroatom content ordered porous carbons for applications in the field of energy storage and conversion.

Recently, bilayer resist processing combined with development in hydro uoroether (HFE) solvents has been shown to enable single color structuring of vacuum-deposited state-of-the-art organic light-emitting diodes (OLED). In this work, we focus on further steps required to achieve multicolor structuring of p-i-n OLEDs using a bilayer resist approach. We show that the green phosphorescent OLED stack is undamaged after lift-off in HFEs, which is a necessary step in order to achieve RGB pixel array structured by means of photolithography. Furthermore, we investigate the in uence of both, double resist processing on red OLEDs and exposure of the devices to ambient conditions, on the basis of the electrical, optical and lifetime parameters of the devices. Additionally, water vapor transmission rates of single and bilayer system are evaluated with thin Ca film conductance test. We conclude that diffusion of propylene glycol methyl ether acetate (PGMEA) through the uoropolymer film is the main mechanism behind OLED degradation observed after bilayer processing.

Yb3+-Lasermedien glänzen mit hoher Effizienz und relativ geringer thermischer Last, besonders in Laseroszillatoren und -verstärkern mittlerer bis hoher Leistung. Modenkopplung von Yb3+-Lasersystemen ermöglicht Subpikosekunden-Pulse bei hoher mittlerer Ausgangsleistung. Diese Arbeit widmet sich zwei Gruppen der vielversprechendsten neuen Yb3+-aktivierten Laserkristalle: den strukturell analogen, monoklinen Doppelwolframaten Yb:KGd(WO4)2 (Yb:KGW), Yb:KY(WO4)2 (Yb:KYW) und KYb(WO4)2 (KYbW) und den Yb3+-dotierten Sesquioxiden, vertreten durch Yb:Sc2O3 (Yb:Skandia). Die spektroskopischen Daten von KYbW, darunter eine extrem kurze 1/e-Absorptionslänge von 13 Mikrometern bei 981 nm, wurden im Rahmen der Dissertation vermessen. Die Lasereigenschaften niedrig Yb3+-dotierter Wolframate im Dauerstrich (cw)- und modengekoppelten Betrieb wurden in Lasern moderater Ausgangsleistung untersucht. Ultrakurzpuls-Erzeugung mit Yb:KYW, Yb:KGW und Yb:Glas wurde in einem passiv modengekoppelten Laser verglichen. Dabei wurde eine relativ hohe Lasereffizienz erreicht, Dank einer Trapezlaserdiode als Pumpquelle mit exzellenter Strahlqualität. Quasi-cw- und cw-Laserbetrieb von Yb3+ in hochdotierten und stöchiometrischen Wolframatkristallen wurden untersucht. Diese Materialien sind interessant für Mikrochip- und Scheibenlaser. Wichtige Fragestellungen waren die Kristallqualität und die Hitzeentwicklung bei hohen Yb3+-Konzentrationen. Erstmals wurde Lasertätigkeit von Wolframaten mit Yb3+-Konzentrationen >>20% und schließlich, mit KYbW, cw-Laserbetrieb eines stöchiometrischen Yb-Lasermaterials demonstriert. Weiterhin wurde mit KYbW der kleinste bisher für einen Laserkristall gemessene Laserquantendefekt erzielt, 1,6%. Unter Benutzung eines Yb:Sc2O3-Lasermediums wurde erstmals modengekoppelter Betrieb eines Oszillators mit Sequioxid-Laserkristall gezeigt. Betrieb mit nichtsolitonen- und solitonenartiger Pulsformung sowie mit Ti:Saphir-Laser oder Trapezlaserdiode als Pumplaser wurden untersucht. Mit einem Ti:Saphir-gepumpten Yb:Skandia-Laser wurde eine Konversionseffizienz von 47 % bezogen auf die absorbierte Pumpleistung erreicht, der bisher höchste Wert für einen modengekoppelten Yb3+-basierten Laser. / Yb3+ laser media excel with high efficiency and relatively low heat load, especially in medium to high power laser oscillators and amplifiers. Mode-locking of Yb3+ laser systems can provide subpicosecond pulse durations at high average power. This work deals with two groups of the most promising novel Yb3+-activated laser crystals: Yb3+-activated monoclinic double tungstates, namely the isostructural crystals Yb:KGd(WO4)2 (Yb:KGW), Yb:KY(WO4)2 (Yb:KYW), and KYb(WO4)2 (KYbW), and Yb3+-doped sesquioxides, represented by Yb:Sc2O3 (Yb:scandia). Spectroscopic data of KYbW were investigated as part of this thesis, finding an extremely short 1/e-absorption length of 13 micrometers at 981 nm. Continuous-wave (cw) and mode-locked laser performance of moderate-average-power lasers based on lowly Yb3+-doped tungstates were examined. Ultrashort pulse generation with Yb:KYW, Yb:KGW, and Yb:glass was compared in a passively mode-locked laser. A relatively high mode-locked laser efficiency was achieved due to a tapered diode pump laser with excellent beam quality. Quasi-cw and cw lasing of Yb3+ in highly doped and stoichiometric tungstate crystals were investigated. These materials are interesting for microchip and thin-disk lasers. Important issues were crystal quality and heat generation at high Yb3+ concentrations. For the first time, laser operation of tungstates with a Yb3+ concentration >>20% and finally, with KYbW, cw lasing of a stoichiometric Yb laser material was achieved. Furthermore, with KYbW, the smallest laser quantum defect ever for a laser crystal was demonstrated, 1.6%. Using a Yb:Sc2O3 laser medium, for the first time mode locking of an oscillator using a sesquioxide laser crystal was realized. Laser regimes with non-solitonlike and solitonlike pulse shaping were investigated, using a Ti:Sapphire laser and a tapered laser diode as pump sources. With a Ti:Sapphire-laser-pumped Yb:scandia laser the highest conversion efficiency with respect to absorbed pump power for any mode-locked Yb3+-based laser was achieved, 47%.

In order to improve the performance and fundamental understanding of conducting polymers, development of new nanotechnologies for engineering aggregated states and morphologies is one of the central focuses for conducting polymers. In this work, we demonstrated an interfacial engineering method for the rational synthesis of a two-dimensional (2D) polyaniline (PANI) nano-array and its corresponding nitrogen-doped porous carbon nanosheets. Not only was it easy to produce a sandwich-like 2D morphology, but also the thickness, anchored ions and produced various metal phosphides were easily and rationally engineered by controlling the composition of the aqueous layer. The novel structural features of these hybrids enabled outstanding electrochemical capacitor performance. The specific capacitance of the as-produced diiron phosphide embedded nitrogen-doped porous carbon nanosheets was calculated to be as high as 1098 F g−1 at 1 A g−1 and an extremely high specific capacitance of 611 F g−1 at 10 A g−1, outperforming state-of-the-art performance among porous carbon and metal-phosphide-based supercapacitors. We believe that this interfacial approach can be extended to the controllable synthesis of various 2D material coupled sandwich-like hybrid materials with potential applications in a wide range of areas.

Optical coherence tomography benefits from the high brightness and bandwidth, as well as the spatial coherence of supercontinuum (SC) sources. The increase of spectral power density (SPD) over conventional light sources leads to shorter measuring times and higher resolutions. For some applications, only a portion of the broad spectral range can be used. Therefore, an increase of the SPD in specific limited spectral regions would provide a clear advantage over spectral filtering. This study describes a method to increase the SPD of SC sources by amplifying the excitation wavelength inside of a nonlinear photonic crystal fiber (PCF). An ytterbium-doped PCF was manufactured by a nanopowder process and used in a fiber amplifier setup as the nonlinear fiber medium. The performance of the fiber was compared with a conventional PCF that possesses comparable parameters. Finally, the system as a whole was characterized in reference to common solid-state laser-based photonic SC light sources. An order-of-magnitude improvement of the power density was observed between the wavelengths from 1100 to 1350 nm.

Aufkonvertierende (upconverting; UC) Nanomaterialien bilden eine neue Klasse nichtlinearer lumineszenter Reporter, die nah-infrarotes (NIR) Anregungslicht in Photonen von höherer Energie umwandeln. Das effizienteste bekannte UC-System bildet hierbei β-NaYF4: 20%Yb(III), 2%Er(III) mikrokristallines Bulkmaterial, für welches UC-Quantenausbeuten (ΦUC) von 10 % berichtet werden, während ΦUC von Nanokristallen (nanocrystals; NC) um mehrere Größenordnungen niedriger sein können. Um die Effizienz von UC-Nanomaterialien zu erhöhen, werden NC üblicherweise mit inerten Schalen versehen. In dieser Arbeit werden mehrere verschiedene Bulkmaterialien spektroskopisch untersucht, um ein Vergleichsmaterial auszuwählen, das als Maßstab für alle folgenden, vergleichbaren Messungen an NC dient. Die Oberfläche von ultrakleinen (3.7±0.5) nm NC wird mit Schalen von bis zu 10 nm Dicke versehen, um die optimale Schalendicke für vollständige Oberflächenpassivierung zu identifizieren, allerdings weisen die Ergebnisse auf eine mögliche Kern-Schale-Durchmischung hin. In einer zweiten Studie werden die unterschiedlichen Dotanden, Er(III) und Yb(III), auf ihre optischen Eigenschaften sowie die Einflüsse von Energietransfer (ET) und von ihrer Umgebung spektroskopisch untersucht. Dabei kann klar zwischen Oberflächeneffekten und oberflächenunabhängigen Volumeneffekten unterschieden werden. Die Ergebnisse werden durch ein einfaches Monte-Carlo-Modell gestützt, durch das die größen- und leistungsdichte-(P-)abhängigen Populierungsdynamiken der strahlenden Banden von Er(III) vorhergesagt werden können. Zuletzt werden durch eine verbesserte Synthesemethode UCNC mit stark verbesserten Lumineszenzeigenschaften hergestellt, mit denen bei vergleichsweise niedrigen P die gleichen ΦUC wie beim Bulkmaterial erreicht werden. Dies liefert einen Einblick in vielfältige Anwendungsmöglichkeiten für UCNC. / Upconversion (UC) nanomaterials are an emerging new class of non-linear luminescent reporters which convert near-infrared (NIR) excitation light into higher-energy photons. The most efficient known UC material is the β-NaYF4: 20%Yb(III), 2%Er(III) bulk (microcrystalline) phosphor with reported UC quantum yields (ΦUC) of 10 %, while ΦUC of nanocrystals (NC) can be several orders of magnitude lower. Strategies to improve the efficiency of UC nanomaterials include surface passivation with inert shells. In this work, several different bulk materials are compared to select one benchmark material for comparisons with NC analyzed with the same measurement techniques. The surface of ultrasmall (3.7 ± 0.5) nm NC is coated with inert shells of up to 10 nm thickness to identify an optimal shell thickness for complete surface passivation, but the results suggest core-shell intermixing. To distinguish between the different dopant ions, Er(III) and Yb(III), and the effect of energy transfer (ET) in a second study, single- and co-doped UCNC are investigated spectroscopically and the influence of their environment is determined thoroughly. Herein, a clear distinction between surface-related and surface-independent, volume-related effects is achieved and the results are emphasized by the use of a simple random walk model which accurately predicts size- and power density (P)-dependent population dynamics of the emissive bands of Er(III). Finally, utilizing an improved synthesis technique, UCNC with enhanced luminescence properties are produced, reaching the same ΦUC as the benchmarked bulk material at reasonably low P, providing an insight into numerous possible applications of UCNC.