Este trabalho apresenta a pesquisa e desenvolvimento de algoritmos de pré-processamento digital de imagens para câmeras térmicas não refrigeradas na faixa espectral do infravermelho distante. O estudo de câmeras infravermelhas é uma questão estratégica, uma vez que tem aplicações militares, civis e científicas. Este trabalho define a concepção e implementação de algoritmos de pré-processamento de imagem necessários para obter imagens com baixo ruído e alto contraste, tais como: correção de não-uniformidade, substituição de pixels defeituosos, geração de histograma, aumento de contraste e processamento de saída do pixel, com taxa de 30 quadros por segundo, utilizando detector não-resfriado com matriz de plano focal de 320 x 240 pixels. Neste trabalho todos os algoritmos foram implementados em software para se obter resultados rapidamente e, assim, facilitar a validação dos códigos. Foram gerados resultados de caracterização eletro-óptica do sistema montado com indicação das principais figuras de mérito que norteiam o estudo desta tecnologia, tais como: componentes de ruído tridimensionais, potência equivalente de ruído, responsividade e relação sinal-ruído. Os resultados indicam que os algoritmos de pré-processamento de imagem propostos aumentam a qualidade da imagem a ser exibida, e os resultados das figuras de mérito calculadas sobre o vídeo digital mostram que todas as métricas apresentaram resultados satisfatórios. / This work aims to present the research and development of digital image processing algorithms for uncooled LWIR thermal camera in Brazil. The study of an infrared thermal camera is a strategic issue since that has more and more applications in military, judicature, rescue, industry, hospital and science areas. This work describes the design and implementation of all image-processing algorithms required to obtain high-performance images with low noise and high contrast, such as: functions for non-uniformity correction of sensor deficiencies, dead-pixel replacement algorithms, histogram generation, contrast enhancement methods and output pixel processing with frame rate of 30 frames per second based on 320 x 240 Uncooled Focal Plane Array (UFPA). In this work all algorithms was implemented in software to get results quickly and to facilitate the validation of computer codes. There are some results of electro-optical characterization on the assembled system, indicating the main figures of merit that guide the study of this technology, such as: 3D noise components, noise equivalent power (NEP), signal transfer function (SiTF) and noise equivalent temperature difference (NETD). The results indicate that the proposed imageprocessing algorithms increase the quality of the corrected image, and the test results through the digital video of the infrared camera show that all metrics are in accordance with its nominal value.

Formatos de modulação com capacidade de ajuste às condições variáveis de propagação são de interesse para uso em redes ópticas reconfiguráveis. Alterações nos níveis de potência e no mapa de dispersão afetam o desempenho de sistemas de transmissão, limitando o alcance e a capacidade de reconfiguração da rede. Fornecer capacidade de ajuste dinâmico ao sinal transmitido, sem usar sistemas complexos de modulação ou de compensação variável de dispersão, é uma solução eficaz para se obter rendimento ótimo nas diversas condições de propagação na rede. Esta característica também é útil na instalação de redes convencionais, poupando tempo e reduzindo custos. Neste trabalho é proposto o formato de modulação NRZ com gorjeio sincronizado com o sinal como alternativa para sobrepujar as limitações impostas pelas redes reconfiguráveis. O sistema proposto tem o atrativo de permitir, além da capacidade de adaptação, a possibilidade de integração dos componentes ópticos do modulador num mesmo substrato. O desempenho do formato de modulação proposto foi analisado em diversas condições de propagação para sistemas a 10 Gbit/s, tanto em sistemas ponto-a-ponto como de longas distâncias. Esta análise foi feita por meio de modelagem matemática, simulações numéricas e experimentos em laboratório. Foi demonstrada a capacidade de ajuste a diversos mapas de dispersão e seus limites, bem como a compensação de efeitos da automodulação de fase causados por alterações no nível da potência do sinal. / Modulation formats with adjustment capability to the variable propagation conditions are of interest in reconfigurable optical networks. Changes in optical power levels and dispersion compensation map affect the transmission system performance, limiting the range and the network reconfiguration capability. To provide dynamical adjustment capability to the transmitted signal, using neither complex modulation systems nor variable dispersion compensation, is an effective solution to obtain optimal performance within the diverse network propagation conditions. This characteristic is also useful during conventional networks installation, saving time and reducing costs. In this work it is proposed the NRZ modulation format with signal synchronized chirp as an alternative to overcome the limitations imposed by the reconfigurable networks. The proposed system has the benefit of allowing, more than adaptation capability, the possibility of integration of the optical modulator\'s components in the same substrate. The proposed modulation format was analyzed under diverse propagation conditions for 10 Gbit/s, in point-to-point as well as long-haul systems. This analyses war performed by mathematical modeling, numerical simulations and laboratorial experiments. It was demonstrated the adjustment capability for diverse dispersion compensation maps and its limits as well as the compensation of the self-phase modulation effects due to changes in optical power levels.

Micrometer-sized liquid-crystal (LC) droplets embedded in a polymer matrix may enable optical switching in the composite film through the alignment of the LC director along an external electric field. When a ferroelectric material is used as host polymer, the electric field generated by the piezoelectric effect can orient the director of the LC under an applied mechanical stress, making these materials interesting candidates for piezo-optical devices. In this work, polymer-dispersed liquid crystals (PDLCs) are prepared from poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) and a nematic liquid crystal (LC). The anchoring effect is studied by means of dielectric relaxation spectroscopy. Two dispersion regions are observed in the dielectric spectra of the pure P(VDF-TrFE) film. They are related to the glass transition and to a charge-carrier relaxation, respectively. In PDLC films containing 10 and 60 wt% LC, an additional, bias-field-dependent relaxation peak is found that can be attributed to the motion of LC molecules. Due to the anchoring effect of the LC molecules, this relaxation process is slowed down considerably, when compared with the related process in the pure LC. The electro-optical and piezo-optical behavior of PDLC films containing 10 and 60 wt% LCs is investigated. In addition to the refractive-index mismatch between the polymer matrix and the LC molecules, the interaction between the polymer dipoles and the LC molecules at the droplet interface influences the light-scattering behavior of the PDLC films. For the first time, it was shown that the electric field generated by the application of a mechanical stress may lead to changes in the transmittance of a PDLC film. Such a piezo-optical PDLC material may be useful e.g. in sensing and visualization applications. Compared to a non-polar matrix polymer, the polar matrix polymer exhibits a strong interaction with the LC molecules at the polymer/LC interface which affects the electro-optical effect of the PDLC films and prevents a larger increase in optical transmission. / Mikrometer-große, in eine Polymermatrix eingebettete Flüssigkristall-Tröpfchen können als elektro-optische Lichtventile fungieren, da die Ausrichtung der Flüssigkristalle durch ein externes elektrisches Feld verändert werden kann. Wird nun ein ferroelektrisches Polymer als Matrix verwendet, so kann das durch den piezoelektrischen Effekt erzeugte und von der äußeren mechanischen Spannung abhängige elektrische Feld den Flüssigkristall ausrichten. Solche Materialien können daher als piezo-optische Lichtventile eingesetzt werden. Im Rahmen dieser Arbeit wurden PDLCs (polymer-dispersed liquid crystals) durch Einbettung von nematischen Flüssigkristallen in Poly(Vinylidenefluoride-Trifluorethylene) (P(VDF-TrFE)) erzeugt. Die Wechselwirkungen an der Grenzfläche zwischen Flüssigkristall und Polymer wurden mittels dielektrischer Spektroskopie untersucht. Im dielektrischen Spektrum des reinen P(VDF-TrFE) wurden zwei Dispersions-Regionen beobachtet, welche vom Glasübergang und einer Ladungsträgerrelaxation des Polymers herrühren. PDLC Folien mit unterschiedlichen Anteilen von Flüssigkristall-Tröpfchen (10 bzw. 60 Gewichtsprozente) zeigten beim Anlegen eines elektrischen Wechselfelds zusatzliche Relaxationseffekte, welche der Bewegung der eingebetteten Flüssigkristall-Moleküle zugeordnet werden konnten. Durch die Einlagerung der Flüssigkristall-Moleküle weist die Struktur eine Relaxation auf, die gegenüber vergleichbaren Prozessen im reinen Flüssigkristall deutlich verlangsamt ist. Des weiteren wurde das elektrooptische und piezo-optische Verhalten der mit 10 und 60 Gewichtsprozent Flüssigkristall geladenen Folien untersucht. Die Lichtstreuung hängt dabei ab von der Fehlanpassung der Brechungsindizes von Polymermatrix und Flüssigkristallen sowie von den Wechselwirkungen der Polymerdipole mit den Flüssigkristall-Molekülen an der Tröpfchenoberfläche. Es konnte erstmalig gezeigt werden, dass die Lichtdurchlässigkeit der PDLC-Folien durch eine externe mechanische Spannung gesteuert werden kann. Dieser Effekt macht das piezo-optische PDLC-Material für die Verwendung in Optik- und Sensoranwendungen interessant. Im Vergleich mit unpolaren Wirtspolymeren zeigen polare Wirtsmaterialien eine deutlich stärkere Wechselwirkung zwischen den Flüssigkristall-Molekülen an der Polymer/Flüssigkristall-Grenzfläche, welche den elektrooptischen Effekt beeinflusst und so die maximale transmissions änderung reduziert.

We correlated experimental results with theoretical estimations of the dielectric function ε(ω) in two contexts: the effect of an electric field in quantum wells and that of the spin polarization of an interacting electron-hole plasma in bulk semiconductors. In the first part, we recorded photoreflectance spectra from Ge/GeSi quantum wells of different widths but having comparable builtin electric fields caused by doping. The reason why the spectra differed in overall shape was difficult to understand by conventional methods, for example, by calculating the allowed transition energies or by fitting the data with lineshape functions at each transition energy. Instead, we computed the photoreflectance spectra from first-principles by using the confined electron and hole wavefunctions. This method showed that the spectra differ in overall shape because of the experimentally hitherto unobserved trend in quantum well electro-optical properties, from the quantum confined Franz-Keldysh effect to the bulk Franz-Keldysh effect, as the well width is increased. The second part develops a threeband microscopic theory for the optical properties due to spin-polarized carriers in quasiequilibrium. We show that calculations based on this theory reproduce all the trends observed in a recent circularly polarized pump-probe experiment reported in the literature. To make the computation less intensive, we proposed a simplified, two-band version of this theory which captured the main experimental features. Besides, we constructed a cw diode laser-based pump-probe setup for our own optical studies of spin-polarized carriers by Kerr rotation. We achieved a sensitivity of detection of Kerr rotation of 3 x 10¯ 8 rad, corresponding to an order of magnitude improvement over the best reports in the literature. The efficacy of our setup allowed for the demonstration of a pumpinduced spin polarization in bulk GaAs, under the unfavorable conditions of steady-state and room temperature.

Sverige är för tillfället operativa med Helikopter 16 - Black Hawk i Afghanistan. Uppgiften som löses i Afghanistan är främre och taktisk sjuktransport (MEDEVAC). Detta arbete handlar om hur befintliga VMS-system i helikoptrar kan kompletteras i syfte att möta ett föreliggande prickskyttehot vid lösande av främre MEDEVAC i ett insatsområde som miljömässigt liknar Afghanistan. I arbetet analyseras möjliga tekniker utifrån aspekter från ett konstruerat scenario där helikopterbesättningarnas uppgift, insatsmiljö samt hotbild beskrivs. Resultatet visar på att MEDEVAC-helikoptrar kan utrustas med sensor-gimbaler där olika sensorer kan kombineras, vilket möjliggör spaning i 360°. Detta bidrar till den militära nyttan då helikopterpersonalens lösande av uppgift effektiviseras, chansen till överlevnad ökar samtidigt som personal och patienter kan känna sig tryggare. / Currently, Sweden has operative Black Hawk helicopters in Afghanistan. The tasks they are solving in Afghanistan are forward and tactical Medical Evacuation (MEDEVAC). This work is about how existing Electronic Warfare Systems in helicopters can be supplemented in order to face a present sniper-threat during forward MEDEVAC in a conflict area which environmentally reminds of Afghanistan. In this work, a few possible techniques will be analyzed. This analyze will be based on aspects from a constructed scenario where the task to be solved, the conflict area, and the known threat is described. The result shows that MEDEVAC-helicopters can be equipped with operator-controlled sensor-gimbals where different electro-optical sensors can be combined. Gimbals allow reconnaissance in 360°. This contributes to the military utility since the main task can be solved by the helicopter personnel more effectively. Also, the probability of survival will probably increase and the personnel and wounded soldiers might feel more secure than before.

In recent years, the interest in improving the properties of liquid-crystalline systems by using metallic nanoparticles has grown. This is because these materials have particular optical and electrical characteristics, associated with the plasmon resonance phenomenon. Recently, several studies have shown that the addition of gold nanoparticles affects the electrical response of liquid crystals depending on the nanoparticles geometry and the liquid-crystalline alignment. In this study, we investigated the effects of the addition of gold nanoparticles with different geometries on the relaxation time of the 4-octyl-4-cyanobiphenyl (8CB) liquid crystal, under the helical confinement conditions. We used an experimental setup that explores the Brewster angle to investigate how the application of a external electrical field and temperature of the system affect the reorientation dynamics of the director vector nearby the transition of nematic-smectic-A phase. The results obtained were analyzed within the elastic theory of Franck-Oseen e allowed us to evaluate the effects of nanoparticles on the viscoelastic parameters of the system. Our results show that the addition of nanoparticles significantly affects the electro-optical response of the investigated liquid crystals, especially in conditions of high temperature and low amplitude of the applied electrical field. In addition, we have observed that the geometry of the nanoparticles plays a key role in the modification of the electro-optical properties of the system. / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Nos últimos anos, tem crescido o interesse no melhoramento das propriedades de sistemas líquido-cristalinos usando nanopartículas metálicas. Isso porque esses materiais apresentam propriedades ópticas e elétricas particulares, associadas ao fenômeno de ressonância de plásmon. Recentemente, vários trabalhos têm demonstrado que a adição de nanopartículas de ouro afetam a resposta elétrica de cristais líquidos dependendo da geometria das nanopartículas utilizadas e do alinhamento líquido-cristalino. Neste trabalho, nós investigamos os efeitos da adição de nanopartículas de ouro com diferentes geometrias sobre o tempo de relaxação de amostras do cristal liquido 4-octil-4-cianobifenil (8CB) nas condições de confinamento helicoidal. Nós usamos um aparato experimental que explora o ângulo de Brewster para investigar como a aplicação de um campo elétrico externo e a temperatura do sistema afetam a dinâmica de reorientação do vetor diretor nas proximidades da transição de fase nemática-esmética-A. Os resultados obtidos foram analisados dentro da teoria elástica de Franck-Oseen e permitiu-nos avaliar os efeitos das nanopartículas sobre os parâmetros viscoelásticos do sistema. Nossos resultados mostram que a adição de nanopartículas afeta significativamente a resposta elétro-óptica dos cristais líquidos investigados, especialmente nas condições de alta temperatura e baixa amplitude do campo elétrico aplicado. Além disso, nós observamos que a geometria das nanopartículas desempenha um papel fundamental namodificação das propriedades eletro-ópticas do sistema.

En premier lieu, des couches minces épitaxiales ont été obtenues sur des substrats de silicium grâce à l’utilisation de l’épitaxie par jets moléculaire et de couches tampons de titanate de strontium SrTiO3. Une technique de croissance par co-déposition a été développée de manière à obtenir un rapport Ba:Ti proche de la stoechiométrie, et ce afin d’éviter la formation de défauts cristallins dans la couche de BaTiO3. Le matériau déposé cristallise dans une structure de symétrie quadratique, ce qui est unpré-requis pour l’obtention de propriétés électro-optiques. De plus, selon les conditions de croissance, l’axe c de la maille élémentaire quadratique a pu être ajusté de manière à être aligné parallèlement ou perpendiculairement à la surface du substrat. L’utilisation d’une mince couche tampon de nucléation a également permis de croitre des films mincesBaTiO3 épitaxiées par pulvérisation, technique largement répandue en milieu industriel.Un coefficient de Pockels élevé a par la suite été obtenu sur de tellescouches épitaxiées. La valeur mesurée de 148pmV est clairement supérieure aux valeurs admises dans la littérature pour d’autres matériaux nonlinéairestels que le niobate de lithium, pour lequel un coefficient de31pmV est rapporté. La méthode de caractérisation électro-optique développée à cette occasion révèle également le caractère ferroélectrique des couches de BaTiO3, observé pour la première fois dans de tels matériaux épitaxiés sur silicium.Finalement, ces couches minces électro-optiquement actives ont été intégrées dans des dispositifs photoniques sur silicium. Dans cette optique,une structure de guide d’onde à fente a été utilisée en insérant 50nm deBaTiO3 entre deux couches de silicium. Dans ce type de structure, le confine mentoptique est 5 fois supérieur à celui obtenu pour des guides d’onde en silicium avec une gaine à base de BaTiO3. Des guides d’ondes rectilignesont tout d’abord été fabriqués, pour lesquels des pertes optiques del’ordre de 50−100 dB/cm ont été mesurées. Par la suite, des composants passifs fonctionnels ont été fabriqués, tels que des interféromètres typeMach-Zehnder, des résonateurs circulaires et des coupleurs. Finalement,la fonctionnalité de composants actifs a été démontrée pour la première fois, en se basant notamment sur des résonateurs ayant un facteur de qualité Q d’environ 5000, et pour lequel la résonance varie en fonction du champ électrique transverse. L’origine physique de cette variation n’a cependant pas pu être expliquée sur la seule base de l’effet Pockels. Cette thèse démontre que l’utilisation de nouveaux matériaux électro optiquement actifs au coeur de dispositifs photoniques sur silicium créede nouvelles opportunités pour la conception et l’ingénierie de circuitsphotoniques. L’intégration d’oxydes tels que barium titanate permet d’envisager de nouveaux concepts de dispositifs pour ajuster, moduler ou commuter la lumière au sein de circuits photoniques denses. De nouveaux défis et perspectives s’ouvrent également aux scientifiques pour modifier artificiellement les propriétés électro-optiques de ces matériaux, que ce soit par contrainte, dopage ou par l’ingénierie de multicouches. De telles avancées pourront sans aucun doute fortement améliorer les performances des dispositifs. / A novel concept of utilizing electro-optical active oxides in silicon photonic devices is developed and realized in the frame of this thesis. The integration of such oxides extends the silicon photonics platform by non-linear materials, which can be used for ultra-fast switching or low-power tuning applications. Barium titanate is used as active material as it shows one of the strongest Pockels coefficients among all oxides. Three major goals are achieved throughout this work: First, thin films of BaTiO3 are epitaxially grown on silicon substrates via molecular beam epitaxy (MBE) using thin SrTiO3 buffer layers. A shuttered co-deposition growth technique is developed in order to minimize the formation of defects in the BaTiO3 films by achieving a 1:1 stoichiometry between barium and titanium. The layers show a tetragonal symmetry and are therefore well-suited for electro-optical applications. The orientation of the long c -axis of the BaTiO3 crystal can be tuned to point perpendicular or parallel to the film surface, depending on the growth conditions. In addition, thin MBE-grown seed layers are combined with rf-sputter deposition. With this hybrid growth approach, rather thick ( > 100 nm), epitaxial BaTiO3 layers on silicon substrates are obtained with a commercially available, wide spread deposition technique. As a second goal, a strong Pockels coefficient of reff = 148 pm/V is determined in the epitaxial BaTiO3 films. This first experimental result on the electro-optical activity of BaTiO3 layers on silicon shows a clear enhancement compared to alternative non-linear materials such as lithium niobate with reff = 31 pm/V. By means of the electro-optical characterization method, also the presence of ferroelectricity in the films is demonstrated. Third, the electro-optical active BaTiO3 layers are embedded into silicon photonic devices. For this purpose, a horizontal slot-waveguide structure with a ~50 nm-thick BaTiO3 film sandwiched between two silicon layers is designed. With this design, the optical confinement in the active BaTiO3 layer is enhanced by a factor of 5 compared to Si-waveguide structures with a standard cross section and BaTiO3 as cladding. Straight BaTiO3 slot-waveguides with propagation losses of 50 − 100 dB/cm as well as functional passive devices such as Mach-Zehnder-interferometers, couplers, and ring resonators are experimentally realized. Additionally, first active ring resonators with Q-factors of Q~5000 are fabricated. The physical origin of the observed resonance shift as a function of the applied bias voltage, however, can not be conclusively clarified in the present work. The combination of high-quality, functional BaTiO3 layers with silicon photonic devices as demonstrated in this thesis offers new opportunities by extending the design palette for engineering photonic circuits with the class of electro-opticalactive materials. The integration of oxides such as BaTiO3 enables novel device concepts for tuning, switching, and modulating light in extremely dense photonic circuits. The integration also opens exciting challenges for material scientists to tailor the electro-optical properties of those oxides by strain engineering or fabrication of superlattice structures, which could ultimately lead to another boost of their electro-optical properties.

Le travail de thèse décrit plusieurs sources lasers originales spécifiquement développées pour deux applications particulières que sont la spectroscopie LIBS (Laser Induced Breakdown Spectroscopy) et le marquage de câbles par laser. Les travaux sur la LIBS ont eu pour principaux objectifs de proposer de nouvelles solutions pour rapprocher les performances de la LIBS portable de celles de la LIBS de laboratoire et d’évaluer leur potentiel sur des applications géologiques. De nouvelles solutions de spectromètres (technologie SWIFTS) et de lasers compacts ont ainsi été évaluées et ont conduit par exemple à la réalisation d’un nouveau pistolet d’analyse LIBS portable. Les deux sources laser disposent de performances spécifiques : une première source compacte de très bonne qualité de faisceau émettant à 532 nm permettant d'obtenir une forte résolution spatiale adaptée à de la cartographie chimique de surface et une deuxième source infrarouge d'encombrement minimum et de qualité de faisceau plus faible mais d'une grande robustesse. La source laser développée pour le marquage par balayage est donc un laser Nd:YVO4 impulsionnel, quelques watts moyens, émettant dans l’ultraviolet à 355 nm. L’architecture originale utilisée, le « Cavity-Dumped », permet d’obtenir une durée d’impulsion constante (2 ns) quelle que soit la fréquence de répétition et donc une puissance crête élevée même à cadence importante. La très bonne qualité de faisceau observée a aussi permis d’obtenir un spot laser de très faible diamètre compatible avec un marquage précis et bien contrasté. / This work describes three original laser sources developed specifically for Laser Induced Breakdown Spectroscopy (LIBS) and wire marking. The main goal of the work on the LIBS was to propose new solutions to make portable LIBS as efficient as laboratory LIBS and to evaluate their potential in geological applications. New spectrometers (based on SWIFTS technology) and compact lasers were evaluated and they led to the realization of a portable LIBS gun. The two types of analyze possible which are in situ analysis and chemical cartography of the sample surface led to design two specific lasers: a first compact source emitting at 532 nm with a high beam quality allowing a high spatial resolution and a second one with a lower beam quality but much more robust. The laser developed for marking is a Q-switched Nd:YVO4 emitting in the UV at 355 nm. The original architecture used, the “Cavity-Dumped”, make the pulse duration constant (2 ns) with any repetition rate so that the peak power is high even if the repetition rate is important. The very good beam quality observed makes the laser spot very small so that the marking is very precise and contrasted.

Formatos de modulação com capacidade de ajuste às condições variáveis de propagação são de interesse para uso em redes ópticas reconfiguráveis. Alterações nos níveis de potência e no mapa de dispersão afetam o desempenho de sistemas de transmissão, limitando o alcance e a capacidade de reconfiguração da rede. Fornecer capacidade de ajuste dinâmico ao sinal transmitido, sem usar sistemas complexos de modulação ou de compensação variável de dispersão, é uma solução eficaz para se obter rendimento ótimo nas diversas condições de propagação na rede. Esta característica também é útil na instalação de redes convencionais, poupando tempo e reduzindo custos. Neste trabalho é proposto o formato de modulação NRZ com gorjeio sincronizado com o sinal como alternativa para sobrepujar as limitações impostas pelas redes reconfiguráveis. O sistema proposto tem o atrativo de permitir, além da capacidade de adaptação, a possibilidade de integração dos componentes ópticos do modulador num mesmo substrato. O desempenho do formato de modulação proposto foi analisado em diversas condições de propagação para sistemas a 10 Gbit/s, tanto em sistemas ponto-a-ponto como de longas distâncias. Esta análise foi feita por meio de modelagem matemática, simulações numéricas e experimentos em laboratório. Foi demonstrada a capacidade de ajuste a diversos mapas de dispersão e seus limites, bem como a compensação de efeitos da automodulação de fase causados por alterações no nível da potência do sinal. / Modulation formats with adjustment capability to the variable propagation conditions are of interest in reconfigurable optical networks. Changes in optical power levels and dispersion compensation map affect the transmission system performance, limiting the range and the network reconfiguration capability. To provide dynamical adjustment capability to the transmitted signal, using neither complex modulation systems nor variable dispersion compensation, is an effective solution to obtain optimal performance within the diverse network propagation conditions. This characteristic is also useful during conventional networks installation, saving time and reducing costs. In this work it is proposed the NRZ modulation format with signal synchronized chirp as an alternative to overcome the limitations imposed by the reconfigurable networks. The proposed system has the benefit of allowing, more than adaptation capability, the possibility of integration of the optical modulator\'s components in the same substrate. The proposed modulation format was analyzed under diverse propagation conditions for 10 Gbit/s, in point-to-point as well as long-haul systems. This analyses war performed by mathematical modeling, numerical simulations and laboratorial experiments. It was demonstrated the adjustment capability for diverse dispersion compensation maps and its limits as well as the compensation of the self-phase modulation effects due to changes in optical power levels.

Um grande número de equipamentos utilizam sistemas ópticos ou eletro-ópticos em suas estruturas, dentre esses equipamentos tem-se os microscópios, telescópios, equipamentos médicos, câmeras de satélites, entre outros. Com isso a necessidade de métodos e ferramentas que auxiliem na determinação do desempenho e da qualidade dos sistemas ópticos é crescente. Um dos métodos mais utilizados para realizar a análise de sistemas ópticos é a determinação da Função de Transferência de Modulação (Modulation Transfer Function - MTF). A MTF representa uma verificação quantitativa e direta da qualidade da imagem, e, além disso, é um teste objetivo que pode ser utilizado em sistemas ópticos concatenados. Esse trabalho apresenta a implementação de um software, denominado de SMTF (Software Modulation Transfer Function), para cálculo da MTF de equipamentos eletro-ópticos. O software foi utilizado para realizar o cálculo da MTF do Retinógrafo Digital, Imageador Termal e Microscópio Cirúrgico Oftalmológico. A informação da MTF auxilia na análise do alinhamento e medição da qualidade óptica, e também define o limite de resolução dos sistemas ópticos, por meio do gráfico da MTF. Os resultados obtidos, com o Retinógrafo e o Imageador Termal, foram comparados com os valores teóricos adquiridos pelo Zemax, que é um software utilizado para desenvolvimento e análise de lentes ou conjuntos ópticos. Já para o Microscópio os resultados obtidos da MTF foram comparados com os resultados obtidos pela MTF medida do Microscópio marca Zeiss, considerado como padrão de qualidade de Microscópios Oftalmológicos. Os resultados obtidos demonstram que o software apresentou ótimo desempenho permitindo uma análise direta e objetiva do comportamento de sistemas ópticos. Com auxílio do software foi feito o alinhamento do Retinógrafo Digital e do Imageador Termal e foi verificada a qualidade da imagem do Microscópio Cirúrgico Oftalmológico. / A number of devices use optics or electro-optics in their structures, such as microscopes, telescopes, medical equipments, satellites cameras, among others. The need for methods and tools that assist in determining the performance and quality of optical systems is increasing. One of the methods most used to perform analysis of optical systems is to measure the Modulation Transfer Function (MTF). The MTF represents a direct and quantitative verification of the image quality, and moreover, it is an objective test that can be used in concatenated optical systems. This paper presents the implementation of software, called SMTF (Software Modulation Transfer Function), in order to calculate the MTF of electro-optical systems. The software was used for calculating the MTF of Digital Fundus Camera, Thermal Imager and Ophthalmologic Surgery Microscope. The information MTF aids the analysis of alignment and measurement of optical quality, and also defines the limit resolution of optical systems, from the graph of MTF. The results obtained with the Fundus Camera and de Thermal Imager were compared with the theorical values acquired by the Zemax, wich is a software used for analysis and development of optical assemblies or lenses. For the Microscope, the results were compared with MTF measured of Microscope Zeiss model, which is the quality standard of ophthalmological microscope. The results show that the software has a good performance by allowing a straightforward analysis of the behavior of optical systems. With the aid of the software was made to align the Fundus Camera and the Thermal Imager and the image quality of Surgical Microscope Ophthalmology was verified.