Los objetivos de la presente tesis son la identificación de la peligrosidad en las intersecciones de ramblas con carreteras, y la aplicación de diferentes índices, producto de análisis cuantitativos y valoraciones cualitativas basadas en un extenso trabajo de campo reunido en fichas descriptivas. Se analizan las diferentes obras de drenaje que afectan al área de estudio, sus funciones y requerimientos para optimizar el tipo de diseño, la ubicación y la eficiencia de las obras de drenaje transversales a los flujos de avenida. Ello sirve de base para conocer la peligrosidad de los cruces de carreteras con ramblas que depende del nivel de exposición de las infraestructuras viarias y del tipo de cruce de carretera.Para la obtención de datos de caudal se ha empleado el método del hidrograma unitario (MHU) y el método racional modificado (MRM), así como la integración de métodos de geometría hidráulica y técnicas de teledetección. Complementariamente, se ha realizado una modelización hidráulica y la aplicación de modelos empíricos para la estimación de la erosión del lecho y transporte de fondo.Otro objetivo del estudio es la definición de propuestas de gestión de los datos sobre peligrosidad orientadas a estrategias y planes de protección civil. El uso de visores por parte de las autoridades competentes, la integración, mantenimiento y manejo de los datos, así como la creación de un Atlas interactivo de peligrosidad hidrológica e hidromorfológica en carreteras son aplicaciones prácticas concretas de la tesis. / The objectives of this thesis are the identification of the hazard at intersections between ephemeral channels and roads, and the application of different rates, resulting from quantitative and qualitative assessments based on important fieldwork stored in descriptive sheets.Different drainage affecting the study area are analyzed, their functions and requirements to optimize the design type, the location and the efficiency of cross drainage works to flood flows. This serves as a starting point to learn about the dangerous road junctions to ephemeral channels depending on the level of exposure of road infrastructure and the type of road crossing.To obtain flow data has been used the unit hydrograph method (UHM) and the modified rational method (MRM) and the integration of hydraulic geometry methods and techniques of remote sensing. Additionally, a hydraulic modeling has been run and the application of empirical models for estimating the bed erosion and bedload transport.Another objective of the study is define proposals for data management about hazard focused to strategies and plans for protection of citizens. The use of web viewers by the competent authorities, integration, maintenance and management of data and the creation of an interactive atlas and hydrological and hydromorphological hazards on roads are actual practical applications of the thesis.

This thesis presents two interrelated studies that consider nutrient management and seasonal changes in recharge on agricultural lands within the context of source water protection. The research focuses first on the management of the risk to groundwater quality through the implementation of various nutrient management practices and secondly considers the dynamic nature of the transport pathway to the groundwater system associated with seasonal changes in climate and hydrology. The combined results provide insight into several of the key factors influencing the protection of groundwater sources within the agricultural landscape. Field work was completed between 2009 and 2010 on an agricultural field near the City of Woodstock, Ontario. The site is located within a source water protection area; the two-year travel time zone of the Thornton Well Field which represents the primary water supply for the City of Woodstock and which has experienced chronic increases in nitrate concentrations over the last few decades. The wells are completed in glacial overburden consisting of intermingling sand and gravel till aquifers which overly a limestone bedrock aquifer. Agricultural best or beneficial management practices (BMPs) field have been implemented and monitored since 2004. The BMPs were adopted in order to reduce nitrogen losses to the aquifer, and consisted of a reduction in nitrogen fertilizer application rates over a series of agricultural fields located near the well The first study is a one year experiment designed to compare alternative nutrient management practices for corn. Combinations of fertilizer treatments with or without a legume cover crop (red clover) were assessed. The fertilizer treatments studied were: a polymer coated urea (slow-release fertilizer) applied at planting, a conventional urea applied at planting, side-dress treatment of a solution of urea and ammonium nitrate in water containing 28% nitrogen with two different application rates applied in the early summer, and a control. The legume cover crop was incorporated in the soil in the previous fall, and acts as a slow release fertilizer as nitrogen is made available to the following crop as the plants decompose. Treatments were compared based on crop yield, overall economic return, and the potential for nitrate leaching. The potential for nitrate leaching was evaluated with bi-weekly shallow soil core during the growing season, and deep soil cores taken before planting, after harvest and the following spring. The deep cores allowed changes in nitrate storage below the rooting zone to be assessed. The results of this study highlight the importance of timing of fertilizer applications and rate of fertilizer applications. Treatments which provide a delay in the release or application of fertilizer, the polymer-coated urea, the calculator-rate side-dress and the clover cover crop, were found to be advantageous. The polymer-coated urea treatments and side-dress treatments were found to reduce leaching compared to the conventional urea treatment. Treatments with the clover cover crops were not found to reduce crop yields or increase leaching potential, and lower fertilizer costs associated to this practice were found to have a positive economic effect. Plots treated with the high-rate side-dress fertilizer application lost more nitrate to the subsurface compared to the other treatment options, and an economic disadvantage was observed as yields did not compensate for higher fertilizer costs. The study highlights the advantages of the different treatments under study, which may be used to inform policy makers and farmers in the selection of economically and environmentally sustainable nutrient management BMP options. Groundwater monitoring at the site over the years has indentified interesting recharge dynamics, particularly in the vicinity of an ephemeral stream which develops annually during spring and winter melt events in a low lying area of the study site. It was hypothesized that rapid recharge could occur beneath the stream allowing for surface water to quickly reach groundwater, posing a threat to municipal water wells. The current framework of source water protection does not take into account the potential risk posed by this type recharge event. At this field site, rapid infiltration associated with this type of event may pose a risk to drinking water quality due to the proximity of the stream to the pumping wells and the nature of the aquifer. The second study examines rapid groundwater recharge processes beneath the ephemeral stream during the course of a spring melt in 2010. The goals of the study were to quantify recharge at one location beneath the stream and to assess whether temperature variations above the water table can be used as a tracer to reasonably estimate recharge during a short live recharge event. A novel housing for the temperature sensors was designed in order to deploy and position them into gravelly materials within the vadose zone, which reduced the potential for the formation of preferential pathways and permitted the retrieval of the sensors at a later date. Field data were collected during the course of the spring melt period from a network of groundwater monitoring wells and subsurface temperature sensors. Spatial and temporal changes in groundwater geochemistry, hydraulic head and temperature were were used to characterize recharge dynamics at the field site. Recharge beneath a segment of the ephemeral stream was quantified through the numerical analysis of the field data using Hydrus 1-D, a one-dimensional numerical model designed to simulate soil water flow and heat transport in variably saturated porous media. Site specific data were used to create the model domain, provide estimates of physical parameters, and to define initial and time variable boundary conditions. Model parameters were first calibrated by simulating periods where it was expected that soils would be gravity drained with minimal soil water flow, and then further refined by simulating the period when the ephemeral stream was present. A final set of parameters was determined, and the initial gravity drained conditions were re-simulated. The model was able to reproduce field observations under different flow scenarios using the final set of parameters, suggesting that the conceptual model and final model domain representative of the actual field conditions. The successful simulation of the field data sets under the different flow scenarios also increases confidence in the uniqueness of the model results. The model estimated that 0.15 m of recharge occurred beneath the instrumented site during the period between March 9th and March 22nd of 2010 when the ephemeral stream was present. This represents approximately a third of the expected total annual recharge for this location. Regional changes in hydraulic head, groundwater temperature and groundwater chemistry provided additional insight into the dynamic nature of the recharge process during the spring meld period and further illustrated the spatial variability of the aquifers’ response to the stream. The study found that the use of temperature as a tracer provided useful and quantifiable insight into recharge phenomena. The results of this study suggest that high rates of rapid recharge occur beneath the ephemeral stream, and are spatially variable. This type of focused infiltration that occurs during the spring melt may represent a risk to municipal water quality if the infiltrating waters are carrying contaminants.

This dissertation reports on the methods and results of a three-phased investigation to estimate the annual volume of ephemeral-channel-focused groundwater recharge attributable to urbanization (urban-enhanced groundwater recharge) in the Sierra Vista subwatershed of southeastern Arizona, USA. Results were used to assess a prior estimate. The first research phase focused on establishment of a study area, installation of a distributed network of runoff gages, gaging for stage, and transforming 2008 stage data into time series of volumetric discharge, using the continuous slope-area method. Stage data were collected for water years 2008 - 2011. The second research phase used 2008 distributed runoff data with NWS DOPPLER RADAR data to optimize a rainfall-runoff computational model, with the aim of identifying optimal site-specific distributed hydraulic conductivity values and model-predicted infiltration. The third research phase used the period-of-record runoff stage data to identify study-area ephemeral flow characteristics and to estimate channel-bed infiltration of flow events. Design-storm modeling was used to identify study-area predevelopment ephemeral flow characteristics, given the same storm event. The difference between infiltration volumes calculated for the two cases was attributed to urbanization. Estimated evapotranspiration was abstracted and the final result was equated with study-area-scale urban-enhanced groundwater recharge. These results were scaled up to the Sierra Vista subwatershed: the urban-enhanced contribution to groundwater recharge is estimated to range between 3270 and 3635 cubic decameters (between 2650 and 2945 acre-feet) per year for the period of study. Evapotranspirational losses were developed from estimates made elsewhere in the subwatershed. This, and other sources of uncertainty in the estimates, are discussed and quantified if possible.

Vernal pools are small, seasonally filling wetlands found throughout forests of north eastern North America. Vernal pools have been proposed as potential 'hot spots' of carbon cycling. A key component of the carbon cycle within vernal pools is the decomposition of leaf litter. I tested the hypothesis that leaf litter decomposition is more rapid within vernal pools than the adjacent upland. Leaf litter mass losses from litterbags incubated in situ within vernal pools and adjacent upland habitat were measured periodically over one year and then again after two years. The experiment was carried out at 24 separate vernal pools, over two replicate years. This is a novel degree of replication in studies of decomposition in temporary wetlands. Factors influencing decomposition, such as duration of flooding, water depth, pH, temperature, and dissolved oxygen were measured. Mass loss was greater within pools than adjacent upland after 6 months, equal after 12 months, and lower within pools than adjacent upland after 24 months. This evidence suggests that vernal pools of Central Ontario are 'hot spots' of decomposition up to 6 months, but not after 12 and 24 months. In the long term, vernal pools may reduce decomposition rates, compared to adjacent uplands.

This thesis presents two interrelated studies that consider nutrient management and seasonal changes in recharge on agricultural lands within the context of source water protection. The research focuses first on the management of the risk to groundwater quality through the implementation of various nutrient management practices and secondly considers the dynamic nature of the transport pathway to the groundwater system associated with seasonal changes in climate and hydrology. The combined results provide insight into several of the key factors influencing the protection of groundwater sources within the agricultural landscape. Field work was completed between 2009 and 2010 on an agricultural field near the City of Woodstock, Ontario. The site is located within a source water protection area; the two-year travel time zone of the Thornton Well Field which represents the primary water supply for the City of Woodstock and which has experienced chronic increases in nitrate concentrations over the last few decades. The wells are completed in glacial overburden consisting of intermingling sand and gravel till aquifers which overly a limestone bedrock aquifer. Agricultural best or beneficial management practices (BMPs) field have been implemented and monitored since 2004. The BMPs were adopted in order to reduce nitrogen losses to the aquifer, and consisted of a reduction in nitrogen fertilizer application rates over a series of agricultural fields located near the well The first study is a one year experiment designed to compare alternative nutrient management practices for corn. Combinations of fertilizer treatments with or without a legume cover crop (red clover) were assessed. The fertilizer treatments studied were: a polymer coated urea (slow-release fertilizer) applied at planting, a conventional urea applied at planting, side-dress treatment of a solution of urea and ammonium nitrate in water containing 28% nitrogen with two different application rates applied in the early summer, and a control. The legume cover crop was incorporated in the soil in the previous fall, and acts as a slow release fertilizer as nitrogen is made available to the following crop as the plants decompose. Treatments were compared based on crop yield, overall economic return, and the potential for nitrate leaching. The potential for nitrate leaching was evaluated with bi-weekly shallow soil core during the growing season, and deep soil cores taken before planting, after harvest and the following spring. The deep cores allowed changes in nitrate storage below the rooting zone to be assessed. The results of this study highlight the importance of timing of fertilizer applications and rate of fertilizer applications. Treatments which provide a delay in the release or application of fertilizer, the polymer-coated urea, the calculator-rate side-dress and the clover cover crop, were found to be advantageous. The polymer-coated urea treatments and side-dress treatments were found to reduce leaching compared to the conventional urea treatment. Treatments with the clover cover crops were not found to reduce crop yields or increase leaching potential, and lower fertilizer costs associated to this practice were found to have a positive economic effect. Plots treated with the high-rate side-dress fertilizer application lost more nitrate to the subsurface compared to the other treatment options, and an economic disadvantage was observed as yields did not compensate for higher fertilizer costs. The study highlights the advantages of the different treatments under study, which may be used to inform policy makers and farmers in the selection of economically and environmentally sustainable nutrient management BMP options. Groundwater monitoring at the site over the years has indentified interesting recharge dynamics, particularly in the vicinity of an ephemeral stream which develops annually during spring and winter melt events in a low lying area of the study site. It was hypothesized that rapid recharge could occur beneath the stream allowing for surface water to quickly reach groundwater, posing a threat to municipal water wells. The current framework of source water protection does not take into account the potential risk posed by this type recharge event. At this field site, rapid infiltration associated with this type of event may pose a risk to drinking water quality due to the proximity of the stream to the pumping wells and the nature of the aquifer. The second study examines rapid groundwater recharge processes beneath the ephemeral stream during the course of a spring melt in 2010. The goals of the study were to quantify recharge at one location beneath the stream and to assess whether temperature variations above the water table can be used as a tracer to reasonably estimate recharge during a short live recharge event. A novel housing for the temperature sensors was designed in order to deploy and position them into gravelly materials within the vadose zone, which reduced the potential for the formation of preferential pathways and permitted the retrieval of the sensors at a later date. Field data were collected during the course of the spring melt period from a network of groundwater monitoring wells and subsurface temperature sensors. Spatial and temporal changes in groundwater geochemistry, hydraulic head and temperature were were used to characterize recharge dynamics at the field site. Recharge beneath a segment of the ephemeral stream was quantified through the numerical analysis of the field data using Hydrus 1-D, a one-dimensional numerical model designed to simulate soil water flow and heat transport in variably saturated porous media. Site specific data were used to create the model domain, provide estimates of physical parameters, and to define initial and time variable boundary conditions. Model parameters were first calibrated by simulating periods where it was expected that soils would be gravity drained with minimal soil water flow, and then further refined by simulating the period when the ephemeral stream was present. A final set of parameters was determined, and the initial gravity drained conditions were re-simulated. The model was able to reproduce field observations under different flow scenarios using the final set of parameters, suggesting that the conceptual model and final model domain representative of the actual field conditions. The successful simulation of the field data sets under the different flow scenarios also increases confidence in the uniqueness of the model results. The model estimated that 0.15 m of recharge occurred beneath the instrumented site during the period between March 9th and March 22nd of 2010 when the ephemeral stream was present. This represents approximately a third of the expected total annual recharge for this location. Regional changes in hydraulic head, groundwater temperature and groundwater chemistry provided additional insight into the dynamic nature of the recharge process during the spring meld period and further illustrated the spatial variability of the aquifers’ response to the stream. The study found that the use of temperature as a tracer provided useful and quantifiable insight into recharge phenomena. The results of this study suggest that high rates of rapid recharge occur beneath the ephemeral stream, and are spatially variable. This type of focused infiltration that occurs during the spring melt may represent a risk to municipal water quality if the infiltrating waters are carrying contaminants.

[Truncated abstract] Fire ephemerals are pioneer species that germinate in large numbers after fire and generally live for between six months and four years. Seeds produced during the short life span of these plants persist in the soil seedbank until a subsequent fire. This study examined the dormancy characteristics and germination requirements of ten Australian fire ephemeral species from five families. Seeds of four species germinated at one or more incubation temperatures in the laboratory, indicating that a proportion of their seedlots were non-dormant at the time of testing. Austrostipa compressa and Austrostipa macalpinei (Poaceae) produced >80% germination at 10?C and Alyogyne hakeifolia and Alyogyne huegelii (Malvaceae) produced 30-40% and 35-50% germination respectively at 10 to 25°C. In each of the Alyogyne species approximately 50% of seeds were impermeable to water, but scarification did not enable germination of all viable seeds suggesting that seeds which did not germinate, may have possessed physiological dormancy as well as physical dormancy. Remaining species had water permeable seeds. ... Germination of both Alyogyne species declined after six months of winter burial but was enhanced by heat treatments after a further six months of summer burial. Actinotus leucocephalus and Tersonia cyathiflora seeds exhibited annual dormancy cycling over two years of burial. Dormancy was alleviated over summer, allowing seeds of both species to germinate in smoke water when seeds were exhumed in autumn, and reimposed over winter, suppressing germination in spring. In Actinotus leucocephalus these dormancy changes were induced in the laboratory by warm (≥15°C) and cold (5°C) temperatures, alleviating and re-imposing dormancy, respectively. Wetting and drying seeds stored at 37°C further accelerated the rate of dormancy release. This dormancy cycling would increase the likelihood of seeds germinating when moisture availability in south-western Australia is greatest for seedling survival. It also explains the variation in germination response to smoke water observed in many species. Thus under natural conditions dormancy levels of fire ephemerals were altered during soil storage which enabled them to respond to fire-related cues such as heat and smoke water, and germinate in autumn. This information will assist in the use of these species in land rehabilitation and ornamental horticulture, and in the conservation of rare or endangered fire ephemerals.

This doctoral project combines a performance-led practice with contextual research in order to demonstrate how arts practice can challenge historical perceptions of clay and enhance its material status. The core knowledge deduced from this research is that embodied performance transforms connectivity between artist and clay and produces a unified incarnation of both elements. Through the use of immersive research methods I gained insights which could not have been predicted - particularly that my experiential performances were a process of ‘clay becoming’ in which I ultimately became the clay. In terms of locality, the practice, comprising eight performance-led works and related documentation, focuses on the China Clay and Ball Clay of South West England. Traditionally in the arts, these materials are associated with ceramics, where through heating, clay becomes rigid and fixed. In contrast, my research investigates the textural fluidity and metamorphic potential of these clays in their raw state. The practice encompasses two interrelated groups of work; the In-breath and Out-breath. These terms are significant in three respects. Firstly they define two different modes and moments of practice. Secondly they refer to myself as a living component of these practices. Thirdly they reflect the cultural associations of clay as a metaphor for life. During the initial exploratory ‘In-breath’ phase of my practice, comprising four site-specific pieces, I engaged with clay at sites of historical relevance, building an expansive knowledge of my material. During the later ‘Out-breath’ phase, identification with site was relinquished. These works took place within neutral spaces, allowing the clay to be explored in relation to my body. The introduction of layering, where photographic elements of private clay rituals were situated within the context of a live performance, allowed a texturally dynamic and immersive experience to be created for both artist and viewer. By collecting and preserving clay traces from these live performances (e.g. foot and body prints) additional value was given to the embedded significance of the clay.

Submitted by Aelson Maciera (aelsoncm@terra.com.br) on 2017-10-06T19:48:50Z No. of bitstreams: 1 TeseRFP.pdf: 32637155 bytes, checksum: d3cc624aead32f85bad14acdb9612054 (MD5) / Approved for entry into archive by Ronildo Prado (producaointelectual.bco@ufscar.br) on 2017-10-10T19:37:58Z (GMT) No. of bitstreams: 1 TeseRFP.pdf: 32637155 bytes, checksum: d3cc624aead32f85bad14acdb9612054 (MD5) / Approved for entry into archive by Ronildo Prado (producaointelectual.bco@ufscar.br) on 2017-10-10T19:38:10Z (GMT) No. of bitstreams: 1 TeseRFP.pdf: 32637155 bytes, checksum: d3cc624aead32f85bad14acdb9612054 (MD5) / Made available in DSpace on 2017-10-10T19:42:50Z (GMT). No. of bitstreams: 1 TeseRFP.pdf: 32637155 bytes, checksum: d3cc624aead32f85bad14acdb9612054 (MD5) Previous issue date: 2017-06-06 / Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) / Ecological studies were carried out in twenty-five natural temporary aquatic environments, located in the cities of Urucuia, Lagoa Grande and Pirapora, in the north and northwest of the state of Minas Gerais, Brazil. In each environment, collections were carried out in April 2015, May 2016 and January 2017, during which limnological variables were measured and samples from the phytoplankton (qualitative) and zooplankton (qualitative and quantitative) communities, as well as from sediment, were collected. Experiments were also carried out in the laboratory to evaluate the effects of different temperatures and luminosity on the hatching of diapause eggs of zooplankton species present in these environments. In general, the values obtained for the physical and chemical variables of the studied environments were in a favorable range to the development of the phytoplankton community. However the low concentration of chlorophyll a and the low richness of phytoplankton species may be reflections of the low water transparency, and the turbidity may limit the growth of the phytoplankton. Qualitative and quantitative analyzes of the zooplankton community indicated low species richness in these ponds. Although Rotifera presented a greater richness of taxa, Copepoda Cyclopoida was the most abundant and numerically representative group. The presence or absence of the Anostraca Dendrocephalus brasiliensis does not seem to interfere in the composition and density of the zoplanktonic community. Species richness and local diversity should be related to disturbances and environmental dynamics. The results obtained in the experiment of hatching of zooplankton diapause eggs showed that the different ponds have similar hatching values, and low temperatures (20°C) and absence of light have a negative influence on hatching these eggs. In addition, it was observed that higher temperatures (35°C) accelerated the hatching of the diapause eggs during the first days of incubation. Thus we can infer that, in general, zooplankton community present in all the studied temporary aquatic environments behave in a similar way. / Foram realizados estudos ecológicos em vinte e cinco ambientes aquáticos temporários naturais, localizados nos municípios de Urucuia, Lagoa Grande e Pirapora, a norte e noroeste do estado de Minas Gerais, Brasil. Em cada ambiente, foram realizadas coletas em abril de 2015, maio de 2016 e janeiro de 2017, durante as quais foram medidas variáveis limnológicas e tomadas amostras das comunidades fitoplanctônica (qualitativas) e zooplanctônicas (qualitativas e quantitativas), além de amostras do sedimento. Também foram realizados experimentos em laboratório para avaliar os efeitos de diferentes temperaturas e da luminosidade sobre a eclosão de ovos de diapausa de espécies zooplanctônicas presentes nesses ambientes. De modo geral, os valores obtidos para as variáveis físicas e químicas dos ambientes estudados encontraram-se numa faixa favorável ao desenvolvimento da comunidade fitoplanctônica. No entanto, a baixa concentração de clorofila a e a baixa riqueza de espécies fitoplanctônicas podem ser reflexos da baixa transparência da água, sendo que a turbidez pode limitar o crescimento do fitoplâncton. Análises qualitativa e quantitativa da comunidade zooplanctônica indicaram baixa riqueza de espécies nessas lagoas. Embora o grupo Rotifera tenha apresentado maior riqueza de táxons, o grupo Copepoda Cyclopoida foi o mais abundante e representativo numericamente. A presença ou ausência do Anostraca Dendrocephalus brasiliensis parece não interferir na composição e na densidade da comunidade zooplanctônica, sendo que a riqueza de espécie e a diversidade local devem estar relacionadas a perturbações e dinâmica do ambiente. Os resultados obtidos no experimento de eclosão de ovos de diapausa do zooplâncton evidenciaram que as diferentes lagoas têm valores semelhantes de eclosão, sendo que baixas temperaturas (20°C) e ausência de luz têm influência negativa sobre a eclosão desses ovos. Além disso, foi observado que temperaturas mais elevadas (35°C) aceleraram a eclosão dos ovos de diapausa durante os primeiros dias de incubação. Assim, podemos inferir que, no geral, a comunidade zooplanctônica presente em todos os ambientes aquáticos temporários estudados se comporta de maneira semelhante. / CNPq: 141023/2013-9

Orientadores: Ana Lucia N. de Camargo Harris, Regina Coelo Ruschel / Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Civil, Arquitetura e Urbanismo / Made available in DSpace on 2018-08-09T16:25:51Z (GMT). No. of bitstreams: 1 Monasterio_CleliaMariaCoutinhoTeixeira_M.pdf: 9835011 bytes, checksum: 447ec688bc4fb2726f30d9d859653b81 (MD5) Previous issue date: 2006 / Resumo: Em conseqüência da acirrada concorrência empresarial no mercado globalizado, o desenvolvimento da arquitetura promocional cresce continuamente para atender às necessidades do marketing de grandes e pequenas empresas. Atender prontamente às necessidades desses clientes tornou-se um desafio para os profissionais de Arquitetura, Engenharia e Construção (AEC) contratados para projetar e executar estandes em dezenas de feiras de negócio, seguindo cronogramas extremamente enxutos. São comuns os casos em que o cliente, os projetistas e os executores encontram-se dispersos geograficamente. Nesse caso, a utilização da Tecnologia de Informação e Comunicação (TIC) pode auxiliá-los nas áreas de desenvolvimento do projeto, proporcionando o compartilhamento de documentos e o trabalho simultâneo. A utilização da Word Wide Web (WWW), por meio da Internet, tem sido fundamental nesse processo, possibilitando a existência de ambientes virtuais de colaboração (extranets) que auxiliam na melhoria da qualidade dos projetos, bem como na velocidade de sua execução e no cumprimento das necessidades do cliente. O objetivo principal desta pesquisa é caracterizar o projeto de estandes segundo considerações determinadas pelo marketing promocional de feiras e identificar a tecnologia utilizada como suporte neste processo quando seus agentes trabalham de forma distribuída. Para conhecer melhor esse processo, realizou-se um estudo de campo cuja pesquisa exploratória foi realizada a partir do desenvolvimento de projetos relacionados à arquitetura promocional desenvolvidos para o setor de marketing da EMBRAER, localizada em São José dos Campos ¿ SP. Nessa pesquisa analisou-se como são desenvolvidos os projetos de estandes cujos agentes encontram-se distribuídos, abrangendo dois aspectos ligados à qualidade do projeto: os conceituais e os de gerenciamento. O primeiro aspecto está relacionado à qualidade e à solução do projeto no que se refere às suas necessidades explícitas e implícitas, em que se analisam fatores importantes, conforme a fundamentação teórica apresentada: o plano de necessidades (briefing), a flexibilidade do projeto, a capacidade de reutilização, a facilidade na montagem e desmontagem e sua agilidade logística. O segundo aspecto está relacionado à comunicação e ao gerenciamento da documentação produzida durante o processo de projeto e à tecnologia utilizada para tanto. Para obtenção dos dados necessários à análise, foram aplicados questionários e formulários às empresas de AEC prestadoras de serviço de projeto e construção do setor. Como resultado, pôde-se perceber que, o trabalho desenvolvido pelas empresas pesquisadas, em sua maioria, segue o processo da engenharia tradicional e que as mesmas não direcionarem seus trabalhos de acordo com as normas para projeto e desenvolvimento. Contudo, estas empresas buscam contemplar as necessidades detectadas na pesquisa bibliográfica e o uso da TIC tem sido extremamente importante para o desenvolvimento e a validação de seus projetos. Portanto, a utilização de extranets de projeto pode contribuir favoravelmente para um maior controle da qualidade dos projetos e de seu desenvolvimento / Abstract: Due to the fierce competition between companies in a globalized market, promotional architecture has been developing steadily to meet the marketing needs of big and small companies. Meeting these clients' needs quickly and effectively has become a challenge for professionals in the Architecture, Engineering and Construction industries (AEC), hired to design and build stands in tenths of trade shows a year, following extremely tight schedules. Cases where the client, the designers and the builders are geographically apart are very common. In such cases, the use of New Information and Communication Technologies (NICT) help them in project development, allowing them to share documents and work simultaneously. Utilizing the World Wide Web (WWW) through the Internet has been crucial in this process, allowing for virtual collaboration sites (extranets) to help improve the quality of the projects, as well as the speed of its execution. The main objective of this research is to characterize trade show stands according to considerations determined by trade show promotional marketing and identify the technology utilized for support in the stands building process when its stakeholders work apart. In order to better understand this process, a field study was carried out, in which the exploratory research was conducted on the development of projects related to promotional architecture for EMBRAER (Empresa Brasileira de Aeronáutica) marketing department, located in São José dos Campos, SP. In that study it was analyzed how the projects of stands are developed when its stakeholders are working apart, focusing on two aspects concerning project quality: conceptual and management aspects. The former relate to project quality concerning to implicit and explicit needs, in which we analyzed important factors, following the theoretical framework presented as follows: briefing, project flexibility, reutilization capabilities, ease of assembling/disassembling and logistical agility. The latter aspects concern communication and management of the paperwork generated during the execution of the project and the technology involved in it. In order to collect the data needed for analysis, questionnaires and forms were distributed to the sector¿s designing and building outsourcing AEC companies. Results indicate that, even though these companies don¿t carry out their work according to the standards for project and development, they seek to meet the needs detected in this bibliographic research. The majority of the work developed by the companies researched follows traditional engineering processes; however, results also show that the use of NICT has been playing a very important role in project development and validation. Therefore, the use of project extranets can give an important contribution to project quality control and development / Mestrado / Arquitetura e Construção / Mestre em Engenharia Civil

This thesis describes invertebrate community on cadavers of small mammals, in particulat how cadaver size influences abundace, density, species richness and composition of the necrobiont community. Cadaver size preference of present insects is also described. Field experiments were performed in 2014 in meadow habitats in spring, summer and autumn season. Cadavers were chosen in three weight groups: mice (20 g), small rats (100 g) and large rats (400 - 500 g). Invertebrate abundance increases with cadaver mass, density of the community remains constant. Larger cadavers also have higher species richness. Most dominant ecological guild are necrophages, represented mosty by blow flies (Calliphoridae). Cadaver size preference of recorded insects differ, necrophagous and predatory taxa tend to prefer larger cadavers. Omnivorous carrion beetles (Silphidae: Nicrophorus) prefer small cadavers. Sex of the carrion beetles (Silphidae) does not affect their cadaver size preference, males and females of particular species have very similar preferences. Keywords Ephemeral resource patch, cadaver, necrobiont, size, abundace, diversity, competition, insect communities