The object of the project is to design a new building of the municipal office, in which is a library with a cafe and a ceremonial hall. The house is brick, not with cellar, on two floors. Roofing is made up of a flat roof. The ground floor houses the library, in the 2nd floor spaces are administrative and ceremonial hall.

Master´s thesis describes the structural design of the load bearing steel structure of exhibition hall located in Brněnské Výstaviště. The structure is designed according to the normative requirements of ČSN EN for ultimate and serviceability limit state. It´s structure formed by the parabolic main frames at a distance of 6 m apart, which are placed in a rectangular plan of 36 x 36 m. As the main material of load bearing elements was used a steel S355. The hall is designed for exhibitions and social occasions. The work contains a statical calculation, which assessed individual cross sections and joins.

The subject of the diploma thesis is the design and structural analysis of an exhibition hall. The building is located in Brno city. The dimensions of a floor plan are 121,8 m x 66,5 m, the height is 17,75 m. The load-bearing structure consists of arched truss girders, which are pin-supported by fixed columns. The distance between main trusses is 8,7 m. The supporting part of the roof deck consists of solid-purlins. Spatial rigidity of the structure is ensured by cross bracing and longitudinal bracing. All structural members are made of rolled steel profiles and are designed according to current ČSN EN standards. Steel S355 is used as the construction material. This thesis consists of structural design report of main load bearing elements including connections design and drawings.

Examensarbetets mål var att utforma två förslag på ett musik- och konsthus för placering i Växjösjön. Konstruktionen ämnas vara flytande och mobil.Gemensamt undersökte författarna byggnadens förutsättningar och möjligheter, i syfte att underlätta utformningsprocessen. Författarna utformade var sitt förslag. Det resulterade i två förslag med skilda arkitektoniska särdrag, skapade utifrån gemensamt stipulerade avgränsningar.Det ena förslaget är utformat med hjälp av geometriska former med raka sidor. Det kontrasterar mot det andra förslaget som har organiska och mjuka former. / The purpose of this thesis was to produce two alternative architectural designs, of a building, that will house various exhibitions and activities. Mainly those will be culture related; music and arts. The building is to be located in a Swedish lake, called Växjösjön, and the structure is intended to be placed on a floating hull.Initially the authors investigated, and discussed, what possibilities and limitations that were associated with the building. The authors then, separate from one another, created one alternative design each.The first of the two designs found its inspiration in different geometrical shapes, whereas the other was more of an organic design with a smooth and flowing architecture. / De digitala ritningarna finns att tillgå från författarna på begäran.

This diploma thesis is being solved for documentation of building in the stage of execution. The building is designed as a showroom with car repair shop. The building site is located in the land registry of Ostrava – Vítkovice. Project documentation is designed accordingly to the valid Czech Republic’s laws, bills and building standards. The building is divided into two objects the first one is showroom with administration and the second one is the car repair shop with washing room and restrooms. These two objects are structurally and operationally connected. The largest plan dimensions are 68,56 x 38,36 m. The building is designed as a reinforced concrete frame in the administrative part and a reinforced concrete wall system in the car repair part. The roof is in both cases realized by using steel trusses. The reinforced concrete frame is lined with aerated concrete masonry. In the roof part it is cladded with sandwich steel panels. The building is founded on reinforced concrete foundation pads with combination of strip foundations. The car repair shop is designed as one floor building, whereas the administrative part is designed as two floor.

This master thesis is focused on elaboration of project documentation for constructing autosalon in Žďár nad Sázavou. Project and appendix are processed by current applicable laws, regulations and standarts. Designed object is situated on plat #6167/2. Both plat sis parts of cadastral area of Žďár nad Sázavou. There are all needed engineering netwoeks nearby. Object is divided on two functional parts, which are operationally and constructionally connected. First part is exhibition and representatice hall, which are capacity of 7 exhibited vehicles. Other partis formed by administrative facilities for staff including sanitary facilities for both staff and visitors. Second part is service for personal and light commercial vehicles with four working stations. Construction is designed reinforced concrete columnar structural system. Plan dimension autosalon is 31,06x22,6m. Plan dimension autoservise is 30,74x18,84m. The cladding autosalon is designed of ceramic tile 250mm. The cladding autoservis is designed of sandwich panel. Roof of building accross the surface is flat roof. Establishment of the object is a combination of footings and foundation belts. Cladding of exhibition hal lis more than 50% glazed. Parts of autosalon and autoservise are designed as sigle storey objects, while administrative part is designed as a two.

The architectural project of Exhibition Hall is located in a part of Brno-Pisárky, in northern area of BVV. The objective of the land-use planning and architectural proposal was to integrate the Hall in proximity to the second entry of BVV. The pavilion is situated on the primary northen axe, which perpendiculary join the pedestrian bridge. The binding foot-bridge is used for path between the entry of BVV and the western entry into the exhibition section. Surrounding the building is situated green park. There are open areas for pedestrian, tree-hemmed paths and relaxation spots around the entire building. The exhibition hall combines four basic parts: the western entrance connected with the pedestrian bridge, public part, storage part and the multi-purpose exhibition space in between. There are two-floor restaurant and snack bars with an open view to the south part of BVV, in particular to the Hall Z. The pavilion was concieved as a ruled rectangular volume. The creative proposal was to involve the ruled surface geometry, which is formed by connecting two curves with a series of straight lines and covers the entire building. The outer curtain wall is implied «the Curtains», reveals a lightness and airiness by dynamic effect. Geometrical curved profiles clearly point the basic entry spaces outside the exhibition hall. The western entry section allows two different points of entrance: from the pedestrian bridge to the first level and from the ground level. In time of trade fairs there are possibilities to use industrial doors along northern and southern elevations as a secondary entrances. There is a lobby space with the monumental staircase in the centre of public section. The circular shape of staircase rises towards atrium. A collaboration of atrium and natural lighting optically extends and makes easier the foyer space. In addition to the trade fairs, the multi-purpose exhibition hall permits diverse possibilities of using – in time of cultural and sports events u

The Diploma’s thesis is focused on the design of selected parts of reinforced concrete exhibition hall (prestressed concrete purlin, prestressed concrete girder, reinforced concrete column, reinforced concrete footing, post-tensioned concrete girders). The load calculation (the self weight, the permanent load, the wind load, the snow load and imposed load), the design and the review of selected reinforced concrete items and the drawing documentation are included in this thesis.

This master thesis is focused on elaboration of project documentation for constructing autosalon in Kopřivnice. Project and appendix are processed by current applicable laws, regulations and standarts. Designed object is situated on plat #419/2 and partly on plat #419/27. Both plats are parts of cadastral area of Kopřivnice. There are all needed engineering networks nearby. Object is divided on three functional parts, which are operationally and constructionally connected. First part is exhibition and representative hall, with capacity of 11 exhibited vehicles. Second part is formed by administrative facilities for staff including sanitary facilities for both staff and visitors. Third part is service for personal and light commercial vehicles with three working stations. Construction is designed partially reinforced concrete columnar structural system and partially of brick longitudinal structural system. The biggest plan dimension of building is 34.3x35.15m. The cladding is designed of sandwich blocks LIVETHERM tl.400mm. Roof of building accross the surface is flat roof with several height levels. Establishment of the object is a combination of footings and foundation belts. Cladding of exhibition hall is more than 50% glazed. Parts of service and autosalon are designed as sigle storey objects, while administrative part is designed as a two.