The subject of the diploma thesi is the design and assessment of the pavilions supporting structure for exhibition and other purposes. The building is located close to Zlin. Preliminary designs of supporting structure were created. One of these was selected and detaileddesigned and assessed. Generallythere are two structures that are extended between themselves. A design and assessment of the entrance portal for the exhibition pavilion was created. The entrance portal is an atypical structure that was created from a combination of hyperboloid and cylinder. The entire portal is formed of welded parts and it is completely from glass. The entrance portal has a variable height, where the highest point is 8,258m. The entrance portal is 20,394m long and has a variable width, where the largest width is 12,000m. The exhibition hall, which is located behind the entrance portal was designed from flat arched truss trusses. The arched trusses are made of several radii and hasa overall impression of an elliptical truss. The trusses have a range 37,000m and they are axially distant 6,000m. The height of the arched trusses is 10.530m. In the leading position of the construction were designed pillars and construction for possible connection of the entrance portal, or for the location of the gate system. Whole construction of the exhibition pavilion, without the entry portal, is 54,000m long and 37,000m wide. The built-up area of both structures is approximately 2200m2. Construction are designed according to normative requirements of CSN EN for limit state of load capacity and usability. The main material of the supporting structural parts was used S355JR steel.

The aim of the work is to design steel structure exhibition pavilion. The building is situated in Brno. The construction is processed in two options. The option A is designed in variant of arched space frame. The internal ground plan dimensions of the building are 42 x 72 meters. Space frame is hinged to the structure of columns. Height in the top of the ship is 16,834 metres. The option B is designed in variant arched truss. The internal ground plan dimensions of the building are 42 x 70 meters. Arched truss is hinged to the structure of columns. Height in the top of the ship is 18,334 metres. The spatial rigidity of the structure is ensured by cross braces. Roof cladding and walls will be made using sandwich panels of KINGSPAN. The main material will be used steel S235.

This thesis has been prepared as urban study BVV in Brno. The project deals with the revitalization of the area, streamlining usage in the long run. The area is delimited to the northeast street Hlinka, southwest Street Bauer. The territory is located near the center of Brno, near the Mendel Square. It is directly connected to the ring road. The main objectives of the project are to restore its original luster campus, thanks to which Brno became known in the world - to create an international cultural and sports science node. Open to the public year-round resort and create new areas of specific housing related to the function of the complex.

Topic of this master thesis is a design of a synagogue together with Jewish community facilities in Trutnov. The thesis is made in the phase of architectural study. Assigned site is located near the historical center of Trutnov. There is a reminder of the old synagogue that was burned out during WW2. There is also newly reconstructed park around it. Main purpose of the proposal is to respect the park with old synagogue and connect both places so anyone can share the experience of reminder of the past together with new function. The designed volume opens towards the street and communicates with the new park with its vast openings. Function of the new building is inspired by the idea of Judaism. It is connected not only with the synagogue but also with communal life, education, celebrations, or art. That is why the proposal is connecting all the functions under one roof and the synagogue is “guarding” all of them from above. The building has three floors. On the lowest floor, there is underground garage. On the ground floor we can find space for Jewish community administration, room for exhibitions, mikveh and kitchen part for the kosher restaurant. The upper floor is mostly terrace. There is only kosher restaurant and synagogue.

El presente trabajo busca mostrar los procesos de distribución y exhibición en la cadena de cines Cineplanet de la película Calichín que, estrenada el 10 de noviembre de 2016, llegó a convertirse en la segunda película peruana más vista de ese año. Para lograr dicho objetivo, se desarrollaron algunos conceptos básicos derivados del negocio cinematográfico, además de explicar cómo es el funcionamiento de las empresas distribuidoras y exhibidoras en el país. Asimismo, se pretende averiguar si dichos procesos fueron decisivos en la gran acogida que tuvo el film en las salas de cine nacionales. Para realizar esta investigación se ha recurrido a la aplicación de entrevistas a los profesionales involucrados en la producción, distribución y exhibición de Calichín. Dicha herramienta metodológica también permitió verificar la importancia de estos procesos en el éxito de la película. / This work seeks to show the distribution and exhibition processes in the Cineplanet movie theater chain of the film Calichín, which, released in November 2016, became the second most viewed Peruvian film of that year. To achieve this objective, some basic concepts derived from the film industry were developed, in addition to explaining how the distribution and exhibition companies work in the country. Also it is intended to find out if these processes were decisive in the great reception that the film had in movie theaters. To carry out this research, interviews have been applied to professionals involved in the production, distribution and exhibition of Calichín. This methodological tool also allowed to verify the importance of these processes in the success of the film. / Tesis

The subject of this Master´s thesis is a proposal of a marketing strategy for an automotive trade show called "Autotec & Autosalon Brno 2010". The theoretical part focuses on marketing communication and practical use of its individual components. The suggested strategy facilitates the primary goal, which is a provision of planned attendance of the trade fair.

The object of the project is to design a new building of the municipal office, in which is a library with a cafe and a ceremonial hall. The house is brick, not with cellar, on two floors. Roofing is made up of a flat roof. The ground floor houses the library, in the 2nd floor spaces are administrative and ceremonial hall.

Master´s thesis describes the structural design of the load bearing steel structure of exhibition hall located in Brněnské Výstaviště. The structure is designed according to the normative requirements of ČSN EN for ultimate and serviceability limit state. It´s structure formed by the parabolic main frames at a distance of 6 m apart, which are placed in a rectangular plan of 36 x 36 m. As the main material of load bearing elements was used a steel S355. The hall is designed for exhibitions and social occasions. The work contains a statical calculation, which assessed individual cross sections and joins.

Mit der Konzentration der technischen Zweigbibliotheken der SLUB in die Bereichsbibliothek Dre•Punct wurden die Bestände zusammengeführt, die die Grundlage und Spezialisierung für die Ingenieurwissenschaftliche Ausbildung und Forschung darstellen....

Die derzeitige Exposition widmet sich dem Spannungsfeld von wissenschaftlicher Leistung und bibliothekarischer Arbeit. 12 Persönlichkeiten werden vorgestellt, die in den Vorgängereinrichtungen der Sächsischen Landesbibliothek (SLB) – sie geht in ihren Anfängen auf das Jahr 1556 zurück – und der Universitätsbibliothek (UB) der TU Dresden tätig waren.