A High percentage of fuel consumption worldwide is in internal combustion engines which has led environmental organizations and authorities to put further pressure on the engine industries to reduce CO2 emissions and enhance engine efficiency. However, historically, the effect of the compression ratio on increasing thermal efficiency of the engine is well known, hence; numerous technical solutions have been proposed to implement a variable compression ratio concept. A new first-class engineering solution to use a hydraulic piston was initially patented by BICERA (British Internal Combustion Engine Research Association) , then improved by Continental and Daimler Benz. A Hydraulic variable compression ratio piston is a hydraulically actuated piston that provides a practical method of obtaining a variable compression ratio piston. In this literature, a hydraulic variable compression ratio piston for a Volvo D13 diesel engine was designed, analyzed, modeled and discussed. This analysis was accomplished by first performing kinematic and dynamic analyses for the piston motion and acceleration based on the crank-slider mechanism. Following this the oil flow characteristics were defined in every mechanical element transferring the oil in its journey from the engine pump to the piston. Moreover, two different designs were proposed in an attempt to predict the compression ratio by modeling the hydraulic, dynamic and engine execution simultaneously. Additionally, stress on the piston was analyzed using Finite Element Analysis (FEA) to assure piston sustainment and rigidity against the harsh combustion chamber environment. In conclusion, the best design was successfully selected and finalized to reach a wide compression ratio range under a boosted inlet pressure based on the selected design, dimensions, check valves and relief valves.

This thesis deals with the creation of visualization for control, display and record data from the hydraulic circuit, which is used for testing water heaters. Visualization is created in the program Control Web from Moravian Instruments. Hydraulic circuit is located in the Strojírenský zkušebný ústav, s.p.. Visualization contribute to automating experiments. Technological unit is controlled by the programmable controller, which communicates via the OPC server with the user interface on PC.

This work includes design of the drive hydraulic shears. The objective is to replace diesel-engine for electric motor. There is a description of the machine and its technological shearing process, types of hydraulic drives and their applications. The work includes the design, description and calculation of hydraulic power unit with an electric motor in two versions. Then there is evaluation of alternatives and select one to which they are processed further structural elements.

Shale gas exploration by means of Hydraulic Fracturing (fracking) has been on the South African (SA) energy agenda since 2010 as a potential alternative energy source to coalmining. Internationally, the desirability of fracking is debated due to increasing evidence of the environmental and health risks fracking poses. However, experts favouring fracking propose this technology as a greener alternative to conventional energy sources such as coal. Limited scientific evidence is available internationally related to knowledge and risk perceptions of fracking and evidence is limited to studies conducted in the United States (US). South African risk perception studies relates to mining, farming, travelling in SA as a foreigner and sexual behaviour. The president of SA called fracking a 'Game-Changer' using industry jargon in the 2014 presidential address. However, SA has failed to produce exploration regulations to date despite oil and gas companies pushing their agendas. Public participation in the process thus far has been limited. This cross sectional study explored the knowledge, health risk perceptions and information sources related to fracking amongst 102 Central Karoo residents through a household survey. Beaufort West municipality was selected as the study site as this is one of the closestareas to Cape Town demarcated for fracking exploration. This study found that 40% of Central Karoo residents do not know what fracking is or the potential risks and benefits thereof. Media is the main information source of 59% of participants. Only half of participants trust their information sources. Those with more trust in their information sources perceived fracking as posing a greater risk. In contrast those believing fracking to pose a low risk were more likely to trust the government and oil and gas companies. More than half of participants (53%) believe that fracking poses an extreme health risk and 78% thought fracking will harm their health. Most commonly listed causes why fracking will make Karoo residents sick includes water pollution (47.4%) and air pollution (19.6%). Higher education was found to have an inverse relationship with trust in the national government A limitation of this study was that farms could not be randomly selected, affecting the representativeness of the sample. There is a major lack of knowledge pertaining to fracking among those living in the Central Karoo which has important implications for managing the process of public participation in the approval of shale gas exploration.

The temporal complexities of anthropogenic Global Climate Change (GCC) force us to extend our moral deliberations beyond what appear to be straightforward, contemporary issues to include the interests of future generations. The Karoo hydraulic fracturing debate is a case in point. The ethical debate thus far has focused on the present-day environmental aspects of Shell’s limited exploratory drilling proposal using hydraulic fracturing technology; but the shale-gas reserves that are believed to underlie the Karoo could assist in mitigating South Africa’s significant carbon emissions, the main contributor to anthropogenic GCC. Thus, I argue that the actual ethical debate is whether to allow gas exploration over the Karoo or to disallow the entire possibility of exploiting any gas reserves that may have been found. A consequentialist weighing up of the respective potential harms to all of the morally-considerable interests involved, including future generations, makes clear that not only is allowing exploration of the Karoo the morally correct decision, but it is ethically obligatory to do so.

Electrification is a relevant subject in the industrial market and provides many benefits. The motivation for this project is to reduce the fire hazard by removing the hydraulic fluids from the steel mill environment. This project aims to analyze the existing hydraulic sealing unit and evaluate the electrification alternatives. This was done by assessing the performance of the current sealing unit to identify the needs that are essential for the product. Concepts that fulfill these needs were then generated and evaluated to decide the optimal solution for this application. The final solution of this project is a concept that replaces the hydraulic cylinder with an electromechanical actuator in the form of a planetary roller screw. This results in a product that performs the punch operation at a sequence time of 0.6 seconds. This solution reaches the goal of electrifying the function while still being compatible with the steel mill environment and spatial constraints.

The Everglades has been experiencing major changes, both climatic and anthropogenic, such that the landscape is experiencing additional stresses and forcings leading it away from its natural equilibrium. The land within and surrounding the Everglades has undergone severe modifications that may have detrimental effects on wildlife and natural features, such as rivers and landscape connectivity. Here in this study, the main focus is on understanding and quantifying hydrologic and geomorphic signatures of climatic and anthropogenic changes on the Everglades landscape. For this, in particular, available data on natural hydrological processes was used, such as rainfall, groundwater elevation, streamflow as well as surface elevations and satellite images for three different regions. These regions are categorized as forested, urban (nearby Everglades regions) and transition (in between forested and urban regions). The results show distinct differences in the statistics of observed hydrologic variables for the three different regions. For example, the probability distribution functions (PDFs) of groundwater elevation for the case of urban region show a shift in mean as well as lower asymmetry as compared to forested regions. In addition, a significant difference in the slopes between smaller and larger scales of the power spectral densities (PSDs) is observed when transitioning from forested to urban. For the case of the streamflow PDFs and PSDs, the opposite trends are observed. Basin properties extracted from digital elevation models (DEMs) of the Everglades reveal that drainage densities increase when moving from the urban to the forested sub-regions, highlighting the topographic and land use/land cover changes that the Everglades has been subjected to in recent years. Finally, computing the interarrival times of extreme (>95th percentile) events that suggest power-law behavior, the changes in power-law exponents of the hydrologic processes further highlights how these processes differ spatially and how the landscape has to respond to these changes. Quantifying these observed changes will help develop a better understanding of the Everglades and other wetlands ecosystems for management to future changes and restoration.

Apalachicola Bay in the Florida panhandle is home to a rich variety of salt water and freshwater wetlands but unfortunately is also subject to a wide range of hydrologic extreme events. Extreme hydrologic events such as hurricanes and droughts continuously threaten the area. The impact of hurricane and drought on both fresh and salt water wetlands was investigated over the time period from 2000 to 2015 in Apalachicola Bay using spatio-temporal changes in the Landsat based NDVI. Results indicate that salt water wetlands were more resilient than fresh water wetlands. Results also suggest that in response to hurricanes, the coastal wetlands took almost a year to recover while recovery following a drought period was observed after only a month. This analysis was successful and provided excellent insights into coastal wetland health. Such long term study is heavily dependent on optical sensor that is subject to data loss due to cloud coverage. Therefore, a novel method is proposed and demonstrated to recover the information contaminated by cloud. Cloud contamination is a hindrance to long-term environmental assessment using information derived from satellite imagery that retrieve data from visible and infrared spectral ranges. Normalized Difference Vegetation Index (NDVI) is a widely used index to monitor vegetation and land use change. NDVI can be retrieved from publicly available data repositories of optical sensors such as Landsat, Moderate Resolution Imaging Spectro-radiometer (MODIS) and several commercial satellites. Landsat has an ongoing high resolution NDVI record starting from 1984. Unfortunately, the time series NDVI data suffers from the cloud contamination issue. Though simple to complex computational methods for data interpolation have been applied to recover cloudy data, all the techniques are subject to many limitations. In this paper, a novel Optical Cloud Pixel Recovery (OCPR) method is proposed to repair cloudy pixels from the time-space-spectrum continuum with the aid of a machine learning tool, namely random forest (RF) trained and tested utilizing multi-parameter hydrologic data. The RF based OCPR model was compared with a simple linear regression (LR) based OCPR model to understand the potential of the model. A case study in Apalachicola Bay is presented to evaluate the performance of OCPR to repair cloudy NDVI reflectance for two specific dates. The RF based OCPR method achieves a root mean squared error of 0.0475 sr?1 between predicted and observed NDVI reflectance values. The LR based OCPR method achieves a root mean squared error of 0.1257 sr?1. Findings suggested that the RF based OCPR method is effective to repair cloudy values and provide continuous and quantitatively reliable imagery for further analysis in environmental applications.

No description available.

<p>Over an extended period of time there have been plans to establish a shared facility in Lennheden to extract groundwater from the Badelunda esker to provide drinking water for the cities of Borlänge and Falun. The city of Falun is dissatisfied with the quality of its drinking water and the city of Borlänge is concerned about the risk of contamination of its existing groundwater supply at its current location. To provide a basis for a decision on this issue, the company Midvatten AB has been commissioned to perform hydrogeological investigations in the area of Lennheden.</p><p>The purpose of this thesis is to design a functional groundwater model of the area between Lennheden, place of planned extraction, and Övre Tjärna, place of existing extraction, to get a better understanding of the groundwater situation in the area. A groundwater model enables simulations of different scenarios in risk assessment and contaminant transport. The aim of the thesis is that the model can be used as an aid in Midvatten’s investigations in Lennheden and that it also can be used in future projects in the area.</p><p>The model has been made in Processing Modflow 5.3 and encompasses an area of 19,5 × 11 km along the Badelunda esker and the river Dalälven between Djurmo and Frostbrunnsdalen. The model has 6 layers and a cell resolution of 50 × 50 meters and 50 × 100 meters. The physical parameters of the model are comprised from different hydrological and geological investigations in the area.</p><p>The Badelunda esker and the river Dalälven totally dominate the groundwater situation in the area. A large part of the work in the thesis has been focused on the calibration of the horizontal hydraulic conductivity in the esker and the vertical hydraulic conductivity in the riverbed of Dalälven. The calibration of the model implies a vertical hydraulic conductivity of 0,01 – 0,1 md-1 in the riverbed of Dalälven, depending on the riverbed thickness.</p><p>Between Bäsna and Övre Tjärna, simulated and observed groundwater levels correspond well. The transport time of the water in the esker, simulated in PMPATH, also corresponds well with estimated transport times. The model can be used for simpler studies of contaminant transport.</p><p>Simulation of the pumping test in Lennheden gives a good correspondence eastward in the esker from Lennheden to Övre Tjärna. Westward in the esker, from Lennheden to Bäsna, the draw down is sharper than observed. Possible reasons for the sharper draw down is an underestimation of the bulk of the esker and that the vertical hydraulic conductivity of the riverbed is set too low between Lennheden and Bäsna.</p><p>In order to improve the model, the most important step should be to thoroughly investigate the river Dalälven with regards to vertical hydraulic conductivity in the riverbed and riverbed thickness.</p> / <p>Under en längre tid har det funnits planer på att upprätta en ny, gemensam vattentäkt för Borlänge och Falu kommun i Badelundaåsen i Lennheden nordväst om Borlänge stad. Falu kommun är missnöjd med vattenkvaliteten i sin ytvattentäkt och Borlänge är oroad över riskerna med att ha sin nuvarande vattentäkt i Badelundaåsen lokaliserad i nära anslutning till riksväg 70 och järnvägen. Beslut i frågan ska tas under 2006 och Midvatten AB har fått i uppdrag att genomföra geohydrologiska undersökningar i och runt Lennheden som underlag till beslutet.</p><p>Syftet med det här examensarbetet är att skapa en fungerande grundvattenmodell för området mellan Lennheden, plats för planerat vattenuttag, och Övre Tjärna, plats för befintligt vattenuttag, för att få en större förståelse för grundvattenmagasinet. En grundvattenmodell möjliggör simulering av olika scenarion så som föroreningstransport i grundvattnet och bestämning av skyddsområden. Målet är att modellen ska kunna användas som ett komplement i Midvattens undersökningar och även användas i framtida projekt i området.</p><p>Modellen är gjord i Processing Modflow 5.3 och omfattar ett 19,5 × 11 km stort område längs Badelundaåsen och Dalälven mellan Djurmo och Frostbrunnsdalen. Modellen består av 6 lager där cellernas upplösning är 50 × 50 meter och 50 × 100 meter. De fysiska parametrar som modellen är uppbyggd av är sammanställda från olika hydrologiska och geologiska undersökningar som har utförts i området de senaste 30 åren.</p><p>Badelundaåsen och Dalälven är de två komponenter som totalt dominerar grundvattensituationen i området. En stor del av arbetet har fokuserats på kalibreringen av den horisontella hydrauliska konduktiviteten i åsen och den vertikala hydrauliska konduktiviteten i Dalälvens botten. I modellen är den vertikala hydrauliska konduktiviteten i Dalälvens botten kalibrerad till intervallet 0,01 – 0,1 md-1 beroende på bottnens mäktighet.</p><p>På sträckan mellan Bäsna och Övre Tjärna så fungerar modellen bra. Simulerade och observerade grundvattennivåer stämmer väl överens. Även vattnets transporttider i åsen, simulerade i PMPATH, stämmer väl överens med uppskattade transporttider. Modellen kan användas för enklare studier av ämnestransport.</p><p>Vid simulering av provpumpningen i Lennheden så är överensstämmelsen god österut i åsen, från Lennheden till Övre Tjärna. Västerut i åsen, från Lennheden till Bäsna, är avsänkningen av grundvattennivån för kraftig. Möjliga orsaker till den för kraftiga avsänkningen är att åsens utbredning är underskattad och att Dalälvens botten har en för lågt ansatt vertikal hydraulisk konduktivitet längs sträckan Lennheden – Bäsna.</p><p>Den klart viktigaste åtgärden för att förbättra modellen skulle vara att grundligt undersöka Dalälven, särskilt längs sträckan Djurmo – Båtsta, med avseende på dess bottens vertikala hydrauliska konduktivitet och mäktighet.</p>