Les accumulateurs Ni-MH (Nickel-Métal-Hydrure) sont un sujet prometteur et largement étudié dans les recherches d’une énergie propre et durable. Trouver le matériau idéal pour l'électrode négative à haute densité volumétrique et gravimétrique est la clé pour l’application de cette technologie. Les hydrures métalliques à base de Ti-Ni ont des propriétés équilibrées entre la capacité d’hydrogène et les performances électrochimiques.L’objectif de cette thèse est d’étudier les effets de substitutions/additions d’éléments et de la mécanosynthèse sur la structure et les propriétés d’hydrogène des alliages Ti-Ni. Dans cette étude, une série d’alliages à base de Ti-Ni avec des substitutions/additions de Mg ou de Zr ont été systématiquement étudiés.Les alliages (TiNi)1-xMgx, (TiH2)1.5Mg0.5Ni, and Ti2-xZrxNi ont été synthétisés par mécanosynthèse à partir de poudres élémentaires. Dans un premier temps, l’influence du temps de broyage et les effets de substitutions/additions sur les microstructures ont été caractérisés par des techniques telles que la DRX, le MEB et le MET. Dans un second temps, les propriétés d’hydrogénation des différents alliages ont été mesurées par des réactions solid-gaz et par cyclage électrochimique.La théorie de la fonctionnelle de la densité (DFT) en utilisant le programme CASTEP a permis de calculer les enthalpies de formation afin de comparer la stabilité thermodynamique des alliages obtenus. Dans ces travaux de recherche, nous avons identifié les priorités d’alliage des ternaires Ni-Ti-Mg et Ti-Ni-Zr dans des conditions de broyage. La transformation structurale du Ti en phase CFC, induite par l’introduction d’éléments étrangers, a été mise en évidence.Les courbes PCI (Pression-Composition-Isothermes) et les capacités de décharge en fonction du nombre de cycles indiquent les propriétés d’hydrogène des alliages obtenus, y compris TiNi, Ti2Ni (amorphe), Ti-Mg et Ti-Zr. / Ni-MH (Nickel-Metal-Hydride) batteries have been a promising and extensively studied topic among clean and sustainable energy researches. Finding the ideal material for the negative electrode with high volumetric and gravimetric densities is the key to apply this technology on broader applications. Metal hydrides based on Ti-Ni have balanced properties between hydrogen capacity and electrochemical performances in cycling.The objective of this thesis is to study the effects of element substitution/doping and mechanical alloying on the structural and hydrogen properties of Ti-Ni alloys. In this study, a series of Ti-Ni based systems with Mg or Zr doping/substitution have been systematically investigated.The metallic compounds (TiNi)1-xMgx, (TiH2)1.5Mg0.5Ni, and Ti2-xZrxNi were synthesized by mechanically alloying from elemental powders.The milling time and effects of Mg, Zr substitution/doping were studied firstly in respect of their microstructures, using characterization techniques including XRD, SEM, TEM (EDX support), followed by the hydrogen properties measurements of the samples by hydrogen solid-gas reaction and electrochemical cycling.A first principle calculation tool based on DFT (Density Functional Theory) was carried out to further investigate the enthalpy of formation in order to compare the thermodynamical stability of the obtained compounds. In the study, we have found the alloying priorities in the ternary alloys Ti-Ni-Mg and Ti-Ni-Zr under milling conditions.A structure transformation of Ti to FCC induced by foreign elements is reported and investigated. Enthalpy of formation per atom of the compounds were obtained by DFT calculations, which helped interpreting the experimental results. PCI (Pressure Composition Isotherms) curves and discharge capacities as the function of cycling numbers revealed the hydrogen properties of the obtained compounds, including TiNi, Ti2Ni (amorphous), Ti-Mg and Ti-Zr.

Le stockage de l'hydrogène est l'un des plus grands problèmes techniques qui restreignent l'application pratique de l'hydrogène. Les hydrures métalliques sont considérés comme la solution principale à ce problème puisqu'ils peuvent absorber et désorber de façon réversible une grande quantité d'hydrogène sous une température et une pression modérées. Par ailleurs, les hydrures métalliques utilisés comme électrodes négatives dans les accumulateurs Nickel-Métal Hydrure (Ni-MH) sont également les composants clés des performances de ces derniers.Dans cette thèse, les alliages métalliques TiMgNix, MgTi1-xNix et TiMg1-xNix ont été synthétisés par broyage mécanique à partir de poudres élémentaires. La microstructure et les transformations de phase des échantillons préparés ont été caractérisées par DRX, MEB et MET (avec microanalyse EDS).Les propriétés d'hydrogénation ont été mesurées par réaction d'hydrogène solide-gaz et par des essais électrochimiques. Un diagramme de composition-capacité 3D a été établi sur la base du diagramme de phase ternaire Ti-Mg-Ni. Un procédé de broyage en deux étapes a été mis en œuvre pour améliorer les performances électrochimiques des alliages Ti-Mg-Ni.De plus, les alliages TiNi1-xCux ont été synthétisés par broyage mécanique et ensuite recuits. L 'influence de la substitution du nickel par le cuivre sur la structure et les propriétés électrochimiques est étudiée en utilisant une double approche: expérimentale et par simulation.Les résultats obtenus par la théorie de la fonctionnelle de la densité (DFT) en utilisant le programme CASTEP montrent que l'enthalpie de formation et l'énergie d'adsorption de l¿hydrogène de la phase pseudo-binaire Ti(Ni, Cu) sont en bon accord avec les résultats expérimentaux. / The storage of hydrogen is one of the biggest technical problem that restrict the practical application of hydrogen. Metal hydrides are mainly regarded as the solution facing to this issue since it can reversibly absorb and desorb big amount of hydrogen under moderate temperature and pressure. Meanwhile, metal hydrides used as the negative electrodes of Ni-MH batteries are also the key components to the battery performance.In this thesis, the metallic composite TiMgNix, MgTi1-xNix and TiMg1-xNix were synthesized by mechanical alloying from elemental powder. The microstructure and phase transformation of prepared samples were characterized by XRD, SEM, TEM (EDS support). The hydrogenation properties were measured by hydrogen solid-gas reaction and electrochemical tests. Based on the Ti-Mg-Ni ternary phase diagram, a 3D composition-capacity diagram have been established. Two-step mill process was proposed for meliorating the electrochemical performance of Ti-Mg-Ni alloys.Additionally, TiNi1-xCux alloys had been synthesized by mechanical alloying and subsequent annealing and studied using experimental and computational approaches. The influence of Cu substitution for Ni on the phase structure and electrochemical properties are investigated. The first principle calculation was carried out to study the formation enthalpy and hydrogen adsorption energy of pseudo-binary Ti(Ni, Cu) phase. The computational results are in good agreement with experimental results.

Mit Hilfe von linearer und nichtlinearer Infrarotspektroskopie im Femtosekundenbereich wurden Schwingungsdynamiken von H2PO4- und BH4- Ionen untersucht sowie ein Volumenplasmon in einem Schichtsystem aus Ga-dotiertem ZnO. Phosphatgruppen stellen Hydratisierungsstellen in Biomolekülen wie DNS oder Phospholipiden dar und wechselwirken intensiv mit wässrigen Solvatationsschalen. Die Untersuchung einer isolierten Phosphatgruppe in Wasser, dem Phosphation H2PO4-, hat ergeben, dass Phosphatschwingungen sehr sensitive Sonden für die ausgeprägte Fluktuationsdynamik von Volumenwasser darstellen, was experimentell mit homogen verbreiterten Linienformen nachgewiesen werden konnte. Komplexe Hydride wie NaBH4 werden wegen ihres großen Wasserstoffgehalts als potenzielle Wasserstoff- bzw. Energieträger für mobile Anwendungen diskutiert. Jedoch ist die Wasserstoffabsorption- bzw. emission energieaufwendig. Für ein detailliertes Verständnis der Wasserstoffdynamiken im BH4- Tetraeder wurden die Energieverlustkanäle nach optischer Anregung von B-H Schwingungen untersucht. Es konnte experimentell gezeigt werden, dass eine Energieumverteilung von hoch- zu niederfrequenten B-H Schwingungen stattfindet mit abschließender Dissipation in das umgebende Medium, z.B. ein Lösungsmittel oder ein NaBH4 Festkörper. Volumenplasmonen repräsentieren kollektive, longitudinale Anregungen eines freien Elektronengases in ionischen oder polaren Kristallstrukturen. In einer hoch Ga-dotierten ZnO-Schicht eines speziellen Schichtsystems konnte eine Volumenplasmon in Reflektionsgeometrie optisch angeregt werden. Dabei führte Intrabandanregung von Leitungsbandelektronen zur Erhitzung des Elektronengases und, durch das nichtparabolische ZnO-Leitungsband, zu einer Erhöhung der effektiven Elektronenmasse und damit zu einer Rotverschiebung der Plasmafrequenz auf einer sub-ps Zeitskala. Damit konnte ein Mechanismus aufgezeigt werden, um Plasmafrequenzen von Volumenplasmonen gezielt transient zu kontrollieren. / The vibrational dynamics of H2PO4- and BH4- ions and a bulk plasmon in Ga-doped ZnO were studied with methods of linear and nonlinear infrared spectroscopy in the femtosecond range. Phosphates constitute the major hydration sites of biomolecules such as DNA or phospholipds and, thus, strongly interact with aqueous hydrations shells. The investigation of isolated phosphate ions (H2PO4-) revealed a distinct sensitivity of phosphate vibrations on the fluctuation dynamics of bulk water that could be experimentally shown by homogeneously broadened line shapes of phosphate vibrations. Complex hydrides such as NaBH4 constitute a large hydrogen content and, accordingly, are discussed as energy- and hydrogen carriers for mobile applications. However, hydrogen uptake and release are energetically unfavourable. In order to gain detailed insights into hydrogen dynamics within the BH4- tetrahedrons energy relaxation mechanisms were studied after optical excitation of B-H vibrations. It could be experimentally shown that energy dissipation proceeds from high-frequency to low-frequency B-H vibrations into the heat bath of the environment, such as e.g. a liquid solvent or the solid state NaBH4. Bulk plasmons represent collective, longitudinal excitations of a free electron gas in an ionic or polar crystal. Within a specifically designed system of Ga-doped ZnO layers, a bulk plasmon could be optically excited in a reflection geometry. Intraband excitation of conduction band electrons resulted in a heating of the electron gas. Due to a non-parabolic ZnO conduction band hot electrons exhibit an increased effective electron mass and, thereby, reduce the plasma frequency. A redshift of the bulk plasma frequency that possesses sub-ps dynamics could be experimentally shown which represents a mechanism for the time-dependent control of plasma frequencies.

This thesis is focused on the mechanisms for corrosion andhydriding of Zircaloy. Special attention is paid tomicrostructural characterisation by cross sectionaltransmission electron microscopy of the oxide layer formed.Three main topics have been treated in this work: (i)Pre-transition oxides were investigated with the purpose ofevaluating if it is possible to predict post-transitionbehaviour of different alloys. (ii) The reason for the commonlyobserved accelerated corrosion of Zircaloy in the presence oflithium hydroxide was investigated by studying the phasetransformation of differently stabilised zirconium oxides andby corrosion studies. (iii) Pre-hydrided Zircaloy-2 was studiedto investigate the influence of hydrogen on the oxidationbehaviour. Characterisation of pre-transition oxides formed onzirconium alloys, has been accomplished with the aim ofdetermining if there are any differences in the properties(morphology, pores, cracks and phases) of the oxide layersformed which might explain the differences in corrosionbehaviour later in life. Four Zircaloy-2 versions and oneZircaloy-4 version were tested in an autoclave at 288° Cfor 20h and 168h and at 360˚C for 96h. Based on thecharacterisation of pre-transition oxide layers only small orno differences were found between the different alloycompositions, thus it is not possible to predict long-timecorrosion behaviour by studying pre-transition oxides. However,large differences were found between the two test temperatures.The higher oxidation temperature results in increased oxidationrates and larger oxide grains, the columnar grains are a factorof 3-4 longer, and the equiaxed grains have an almost doubledmaximum diameter. The fraction of columnar grains andtetragonal phase also increases with temperature. The reasonfor the difference in morphology between the two temperaturesis not fully understood, but the results show that acceleratedtesting at elevated temperatures may be a questionableapproach. One of the Zircaloy-2 samples was also anodicallyoxidised. The oxide layer formed only contains equiaxed grainsand phase analysis shows both monoclinic and tetragonal phasesare present. Oxidation tests of Zircaloy-2 and Zircaloy-4 in water andlithiated water at 360 ° C show that the pre-transitionoxidation rate is not affected by the presence of LiOH, but thetransition occurs earlier and the post-transition oxidationrate is increased. The oxidation rate correlates with thedensity of cracks in the oxide layer and the morphology of theoxide grains. The oxides formed have a layered structure andfor samples oxidised in LiOH solution the inner protectivelayer is thin. The effect of LiOH is suggested to be the resultof partial dissolution of the oxide and subsequentincorporation of lithium ions during adissolution-precipitation process. Newly formed oxide isprobably more hydrous, and the grain boundaries areparticularly liable to dissolution. The increased concentrationof LiOH within cracks and pores could reach the detrimentallevels necessary for dissolution. This is supported by theinsensitivity in the pre-transition region to both thecompositions of the alloy and to the environment. The alloycomposition influences the microstructure of the oxide layer,and thereby the resistance to accelerated corrosion rate inlithiated water. The hydrogen pickup ratio follows the weightgain, not the oxidation rate, up to the second transition. Whenthe protective oxide layer is degraded the hydrogen pickupratio increases markedly. To evaluate if hydrogen is a cause for or a consequence ofaccelerated corrosion, pre-transition oxidation tests ofZircaloy-2 have been performed with hydrogen present in threedifferent states: i) Hydrogen in solid solution in thezirconium alloy, corresponding to the initial oxidation priorto precipitation of hydrides. ii) Uniformly distributedhydrides simulating a situation in whish hydrides starts toprecipitate and iii) Massive surface hydride claimed to be themain cause of accelerated oxidation. Based on the resultsobtained, it is concluded that the oxidation of massivezirconium hydride resembles the oxidation of zirconium metal.This fact clearly shows that accelerated oxidation of zirconiumalloys cannot be due solely to the presence of a massivehydride layer, but also requires a combined effect offorexample interfacial roughness and hydride precipitation. <b>Keywords:</b>Zircaloy, Zirconium alloys, Oxidation, Oxidelayer, Pre-Transition, Hydriding, Pre-Hydrided, Hydrides,Lithium Hydroxide (LiOH), Lithiated Water, Dissolution, CrossSectional TEM

Several hydrides of Group 2 and 12 elements were generated in the gas phase using an emission source that combines an electrical discharge with a high temperature furnace, and their high-resolution infrared emission spectra were recorded with a Fourier transform spectrometer. Two classes of molecules were studied: <em>a)</em> diatomic metal hydrides BeH, MgH, CaH, SrH, ZnH and CdH; <em>b)</em> linear triatomic metal hydrides BeH₂, MgH₂, ZnH₂ and HgH₂. <br /><br /> Infrared emission spectra of BeH, MgH, CaH, SrH, ZnH and CdH free radicals contained several vibration-rotation bands in their ²SIGMA⁺ ground electronic state. The new data were combined with all the previous ground state data from diode laser infrared spectra and pure rotation spectra available in the literature. Spectroscopic constants, i. e. , vibrational band origins, rotational, centrifugal distortion, and spin-rotation interaction constants, were determined for each observed vibrational level by least-squares fitting of all the data. In addition, the data from all isotopologues were fitted simultaneously using the empirical Dunham-type energy level expression for ²SIGMA⁺ states, and correction parameters due to the breakdown of the Born-Oppenheimer approximation were determined. The equilibrium internuclear distances (<em>r</em>_e) of ⁹BeH, ²⁴MgH, ⁴⁰CaH, ⁸⁸SrH, ⁶⁴ZnH and ¹¹⁴CdH were determined to be 1. 342424(2), 1. 729721(1), 2. 002360(1), 2. 146057(1), 1. 593478(2) and 1. 760098(3) angstroms, respectively, and the corresponding <em>r</em>^e distances for ⁹BeD, ²⁴MgD, ⁴⁰CaD, ⁸⁸SrD, ⁶⁴ZnD and ¹¹⁴CdD are 1. 341731(2), 1. 729157(1), 2. 001462(1), 2. 145073(1), 1. 593001(2) and 1. 759695(2) angstroms, respectively. <br /><br /> Gaseous BeH², MgH², ZnH² and HgH² molecules were discovered and unambiguously identified by their high-resolution infrared emission spectra. The &nu;₃ antisymmetric stretching fundamental band and several hot bands in the &nu;₃ region were rotationally analyzed, and spectroscopic constants were obtained for almost all naturally-occurring isotopologues. The rotational constants of the 000 ground states were used to determine the <em>r</em>₀ internuclear distances. For BeH₂, ZnH₂, ZnD₂, HgH₂ and HgD₂ molecules, the rotational constants of the 000, 100, 01¹0 and 001 levels were used to determine the equilibrium rotational constants (<em>B</em>_e) and the associated equilibrium internuclear distances <em>r</em>_e. The <em>r</em>_e distances of ZnH₂ and ZnD₂ differed by about 0. 01%, and those of HgH₂ and HgD₂ differed by about 0. 005%. These discrepancies were larger than the statistical uncertainties by one order of magnitude, and were attributed to the breakdown of the Born-Oppenheimer approximation.

Metal hydrides are promising candidates for H2 storage, but high stability and poor kinetics are the important challenges which have to be solved for vehicular applications. Most of recent experimental reports for improving thermodynamics of metal hydrides have been focused on lowering reaction enthalpies of a metal hydride by mixing other compounds. However, finding out metal hydride mixtures satisfying favorable thermodynamics among a large number of possible metal hydride mixtures is inefficient and thus a systematic approach is required for an efficient and rigorous solution. Our approaches introduced in this thesis allow a systematic screening of promising metal hydrides or their mixtures from all possible metal hydrides and their mixtures. Our approaches basically suggest two directions for improving metal hydride thermodynamics. First, our calculations for examining the relation between the particle size of simple metal hydrides and thermodynamics of their decomposition reactions provide that the relation would depend on the total surface energy difference between a metal and its hydride form. It ultimately suggests that we will be able to screen metal hydride nanoparticles having favorable thermodynamics from all possible metal hydrides by examining the total surface differences. Second, more importantly, we suggest that our thermodynamic calculations combined with the grand canonical linear programming method and updated database efficiently and rigorously screen potential promising bulk metal hydrides and their mixtures from a large collection of possible combinations. The screened promising metal hydrides and their mixtures can release H2 via single step or multi step. Our additional free energy calculations for a few selected promising single step reactions and their metastable paths show that we can identify the most stable free energy paths for any selected reactant mixtures. In this thesis, we also demonstrate that a total free energy minimization method can predict the possible evolution of impurity other than H2 for several specified mixtures. However, it is not ready to predict reaction thermodynamics from a large number of compounds.

Die Strukturen der Erdalkalimetall-Subnitride (EA2N) von Calcium, Strontium und Barium ermöglichen mit ihrem schichtartigen Aufbau aus EA6N-Oktaedern Intercalationsreaktionen. Die Redox-Intercalation von Stickstoff in Sr2N wurde an Einkristallen untersucht. Nur durch eine drastische Erhöhung des Reaktionsgasdruckes im Vergleich zu den Reaktionen an mikrokristallinen Proben wurde die Intercalation der Diazenidionen in die Kristalle zu Sr4N3 und SrN möglich. Für eine analoge Intercalation von Wasserstoff in Sr2N konnten die Reaktionsbedingungen dahingehend optimiert werden, dass erstmals phasenreines Strontiumnitridhydrid (Sr2N)H bzw. deuterid (Sr2N)D erhalten wurde. Anhand von Intercalationsreaktionen mit Sr2N Kristallen konnte gezeigt werden, dass der Intercalationsprozess, erkennbar an der deutlichen Farbänderung von schwarz nach bersteinfarben, von außen nach innen fortschreitet. Als Methode zur räumlich aufgelösten Analyse wurde die Laserablation, in Kombination mit einem ICP - Massenspektrometer (LA-ICP-MS) verwendet. In der Literatur beschriebene Quantifizierungsstrategien wurden auf die Anwendbarkeit für die gegebene Fragestellung untersucht. Mit der ortsaufgelösten Analyse von Einkristallen konnte gezeigt werden, dass die Intercalation von Stickstoff in die Kristalle kontinuierlich von den Kanten zur Kristallmitte fortschreitet.

<p>This thesis is focused on the mechanisms for corrosion andhydriding of Zircaloy. Special attention is paid tomicrostructural characterisation by cross sectionaltransmission electron microscopy of the oxide layer formed.Three main topics have been treated in this work: (i)Pre-transition oxides were investigated with the purpose ofevaluating if it is possible to predict post-transitionbehaviour of different alloys. (ii) The reason for the commonlyobserved accelerated corrosion of Zircaloy in the presence oflithium hydroxide was investigated by studying the phasetransformation of differently stabilised zirconium oxides andby corrosion studies. (iii) Pre-hydrided Zircaloy-2 was studiedto investigate the influence of hydrogen on the oxidationbehaviour.</p><p>Characterisation of pre-transition oxides formed onzirconium alloys, has been accomplished with the aim ofdetermining if there are any differences in the properties(morphology, pores, cracks and phases) of the oxide layersformed which might explain the differences in corrosionbehaviour later in life. Four Zircaloy-2 versions and oneZircaloy-4 version were tested in an autoclave at 288° Cfor 20h and 168h and at 360˚C for 96h. Based on thecharacterisation of pre-transition oxide layers only small orno differences were found between the different alloycompositions, thus it is not possible to predict long-timecorrosion behaviour by studying pre-transition oxides. However,large differences were found between the two test temperatures.The higher oxidation temperature results in increased oxidationrates and larger oxide grains, the columnar grains are a factorof 3-4 longer, and the equiaxed grains have an almost doubledmaximum diameter. The fraction of columnar grains andtetragonal phase also increases with temperature. The reasonfor the difference in morphology between the two temperaturesis not fully understood, but the results show that acceleratedtesting at elevated temperatures may be a questionableapproach. One of the Zircaloy-2 samples was also anodicallyoxidised. The oxide layer formed only contains equiaxed grainsand phase analysis shows both monoclinic and tetragonal phasesare present.</p><p>Oxidation tests of Zircaloy-2 and Zircaloy-4 in water andlithiated water at 360 ° C show that the pre-transitionoxidation rate is not affected by the presence of LiOH, but thetransition occurs earlier and the post-transition oxidationrate is increased. The oxidation rate correlates with thedensity of cracks in the oxide layer and the morphology of theoxide grains. The oxides formed have a layered structure andfor samples oxidised in LiOH solution the inner protectivelayer is thin. The effect of LiOH is suggested to be the resultof partial dissolution of the oxide and subsequentincorporation of lithium ions during adissolution-precipitation process. Newly formed oxide isprobably more hydrous, and the grain boundaries areparticularly liable to dissolution. The increased concentrationof LiOH within cracks and pores could reach the detrimentallevels necessary for dissolution. This is supported by theinsensitivity in the pre-transition region to both thecompositions of the alloy and to the environment. The alloycomposition influences the microstructure of the oxide layer,and thereby the resistance to accelerated corrosion rate inlithiated water. The hydrogen pickup ratio follows the weightgain, not the oxidation rate, up to the second transition. Whenthe protective oxide layer is degraded the hydrogen pickupratio increases markedly.</p><p>To evaluate if hydrogen is a cause for or a consequence ofaccelerated corrosion, pre-transition oxidation tests ofZircaloy-2 have been performed with hydrogen present in threedifferent states: i) Hydrogen in solid solution in thezirconium alloy, corresponding to the initial oxidation priorto precipitation of hydrides. ii) Uniformly distributedhydrides simulating a situation in whish hydrides starts toprecipitate and iii) Massive surface hydride claimed to be themain cause of accelerated oxidation. Based on the resultsobtained, it is concluded that the oxidation of massivezirconium hydride resembles the oxidation of zirconium metal.This fact clearly shows that accelerated oxidation of zirconiumalloys cannot be due solely to the presence of a massivehydride layer, but also requires a combined effect offorexample interfacial roughness and hydride precipitation.</p><p><b>Keywords:</b>Zircaloy, Zirconium alloys, Oxidation, Oxidelayer, Pre-Transition, Hydriding, Pre-Hydrided, Hydrides,Lithium Hydroxide (LiOH), Lithiated Water, Dissolution, CrossSectional TEM</p>

Late transition metal complexes of silver(I), rhodium(I), ruthenium(II), palladium(II) and platinum(II) containing a nitrile-functionalized N-heterocyclic carbene ligand (C-CN) were prepared. The nitrile group on the C–CN ligand was shown to undergo hydrolysis under basic conditions, leading to a silver(I) carbene complex with a primary-amido functional group, and a trimetallic complex of palladium(II) with a partially hydrolyzed C–N–N–C donor ligand. The reduction of a nitrile-functionalized imidazolium salt in the presence of nickel(II) chloride under mild conditions yielded an axially chiral square-planar nickel(II) complex containing a unique primary-amino functionalized N-heterocyclic carbene ligand (C-NH2). A transmetalation reaction moved this chelating C–NH2 ligand from nickel(II) to ruthenium(II), osmium(II), and iridium(III), yielding important catalysts for the hydrogenation of polar double bonds. The ruthenium(II) complex, [Ru(p-cymene)(C–NH2)Cl]PF6 catalyzed the transfer and H2-hydrogenation of ketones. The bifunctional hydride complex, [Ru(p-cymene)(C–NH2)H]PF6, which contains a Ru–H/N–H couple showed no activity under catalytic conditions unless when activated by a base. The outer-sphere mechanism involving bifunctional catalysis of ketone reduction is disfavored according to experimental and theoretical studies and an inner-sphere mechanism is proposed involving the decoordination of the amine donor from the C–NH2 ligand. The ruthenium(II) complex [RuCp*(C–NH2)py]PF6 showed higher activity than the iridium(III) complex [IrCp*(C–NH2)Cl]PF6 in the hydrogenation of ketones. This ruthenium(II) complex also catalyzes the hydrogenation of an aromatic ester, a ketimine, and the hydrogenolysis of styrene oxide. We proposed an alcohol-assisted outer sphere bifunctional mechanism for both systems based on experimental findings and theoretical calculations. The cationic iridium(III) hydride complex, [IrCp*(C–NH2)H]PF6 , was prepared and this failed to react with a ketone in the absence of base. The crucial role of the alkoxide base was demonstrated in the activation of this hydride complex in catalysis. Calculations support the proposal that the base deprotonates the amine group of this hydride complex and triggers the migration of the hydride to the η5-Cp* ring producing a neutral iridium(I) amido complex. This system contains an active Ir–H/N–H couple required for the outer sphere hydrogenation of ketones in the bifunctional mechanism.

Late transition metal complexes of silver(I), rhodium(I), ruthenium(II), palladium(II) and platinum(II) containing a nitrile-functionalized N-heterocyclic carbene ligand (C-CN) were prepared. The nitrile group on the C–CN ligand was shown to undergo hydrolysis under basic conditions, leading to a silver(I) carbene complex with a primary-amido functional group, and a trimetallic complex of palladium(II) with a partially hydrolyzed C–N–N–C donor ligand. The reduction of a nitrile-functionalized imidazolium salt in the presence of nickel(II) chloride under mild conditions yielded an axially chiral square-planar nickel(II) complex containing a unique primary-amino functionalized N-heterocyclic carbene ligand (C-NH2). A transmetalation reaction moved this chelating C–NH2 ligand from nickel(II) to ruthenium(II), osmium(II), and iridium(III), yielding important catalysts for the hydrogenation of polar double bonds. The ruthenium(II) complex, [Ru(p-cymene)(C–NH2)Cl]PF6 catalyzed the transfer and H2-hydrogenation of ketones. The bifunctional hydride complex, [Ru(p-cymene)(C–NH2)H]PF6, which contains a Ru–H/N–H couple showed no activity under catalytic conditions unless when activated by a base. The outer-sphere mechanism involving bifunctional catalysis of ketone reduction is disfavored according to experimental and theoretical studies and an inner-sphere mechanism is proposed involving the decoordination of the amine donor from the C–NH2 ligand. The ruthenium(II) complex [RuCp*(C–NH2)py]PF6 showed higher activity than the iridium(III) complex [IrCp*(C–NH2)Cl]PF6 in the hydrogenation of ketones. This ruthenium(II) complex also catalyzes the hydrogenation of an aromatic ester, a ketimine, and the hydrogenolysis of styrene oxide. We proposed an alcohol-assisted outer sphere bifunctional mechanism for both systems based on experimental findings and theoretical calculations. The cationic iridium(III) hydride complex, [IrCp*(C–NH2)H]PF6 , was prepared and this failed to react with a ketone in the absence of base. The crucial role of the alkoxide base was demonstrated in the activation of this hydride complex in catalysis. Calculations support the proposal that the base deprotonates the amine group of this hydride complex and triggers the migration of the hydride to the η5-Cp* ring producing a neutral iridium(I) amido complex. This system contains an active Ir–H/N–H couple required for the outer sphere hydrogenation of ketones in the bifunctional mechanism.