261 |
Rozvoj lidských zdrojů ve firmě / Development of Human Resources in the CompanyHlaváč, Michal January 2010 (has links)
The graduation theses focus on the problems of development, emphasising the part of education of the employees in the company UNISTAV Inc. At present, the management of development of human resources is becoming one of the most important activities of personal work. In the practical part, an analysis of individual stages of the educational system in the company UNISTAV Inc. Attention will be paid to the identification of individual needs, to making the working output more effective, to increasing the competitiveness of the company. On the basis of the results of the analysis, the suggestions aiming towards the changes in the educational system in the point stock company UNISTAV has been made.
|
262 |
Výběr informačního systému / Information System SelectionDostál, Ondřej January 2011 (has links)
This thesis describes the selection of an optimal information system for construction company UNICON, Ltd. Part of the thesis is analysis of current situation and based on it also selection of best solution of IS, which usage is then described.
|
263 |
Řízení rizika zhotovitele stavební zakázky / Risk Management Contractor ConstructionŠtráchal, Jakub January 2013 (has links)
THE AIM OF MY THESIS ON THE TOPIC OF "RISK MANAGEMENT CONTRACTOR CONSTRUCTION CONTRACTS" IS TO DESCRIBE THE PROCESS OF RISK MANAGEMENT OF CONTRACTOR CONSTRUCTIONS WORK. THIS PROCESS BEGINS WITH THE IDENTIFICATION OF RISKS BY USING DIFFERENT METHODS. FOLLOWED BY ANALYSIS OF THESE RISKS. THE MAIN GROUP OF RISKS ARE RISKS ASSOCIATED WITH THE SUBCONTRACTING SYSTEM. THESE RISKS I WILL DESCRIBE THEIR SIGNALS AND TRIGGERS. ON THE BASIS OF THEIR IMPORTANCE TO THE PROJECT, I WILL DEFINE THE MANNER OF THEIR TREATMENT. IN THE LAST PART IS A PROPOSAL OF A MONITORING RISKS, WHERE I SUGGEST A WAY, WHO WILL LOOK AFTER THE RISKS DURING THE CONSTRUCTION AND WHEN.
|
264 |
Identifikace regulované soustavy, jednotka pro spalování biomasy / Process identification, experimental unit for biomass combustionMacalík, Radek January 2008 (has links)
This thesis dissertates the identification of existing experimental unit of biomass combustion. It analyses particular methods of identification, the selection of a model and methods of the estimation of parameters, especially by using last square method and analysis of time-response characteristic. It describes common identification procedure and particular algorithms which were used in practice for obtaining model’s parameters. The thesis also mentions popular software tools used for the modeling and the identification of systems. It comprises the implementation of obtained mathematic models using programming environment Borland Delphi as well.
|
265 |
Management konfigurace / Configuration ManagementZlámal, Petr January 2008 (has links)
This diploma thesis is engaged in identification of configuration object, identification of configuration items and design of configuration management system, which results from ČOS 051605 to ČOS 051611 and was modified according to requirement of Exerion Precision Technology Olomouc, s.r.o., division „Výroba monodílů a podskupin, Olomouc“, Železniční 6, 779 00 Olomouc, Česká republika, focused on configuration management activity „Configuration Identification“ and „Configuration Control – Engineering Changes, Deviations and Waivers“.
|
266 |
Optimalizace výroby těžkých ocelových odlitků / Optimation of heavy steel castingsPernica, Vítězslav January 2009 (has links)
Diploma thesis deal with definnig the casuses of stell castings defects in the DSB EURO s.r.o Foundry. The main target is to optimise technological parameters for avoiding the surface casting defects. The first stage is the identification of the defects, describing of the main reasons and mechanic. Defect quantification is make from measuring of area and volume of the mended defects. In association with surface defects, the number of the crackings was observed. Finally there are suggested correction actions based on the previous investigation.
|
267 |
Návrh a realizace jednotek modulárního přístupového systému / Modular access control system units design and implementationFoltýn, Petr January 2010 (has links)
This thesis describes design and realization of units of a developed modular access control system. It is focused on creating a software units modular system and its function.
|
268 |
Bezsensorové řízení BLDC motoru / Sensorless control of BLDC motorKrižan, Jakub January 2012 (has links)
This thesis is focused on problematics of control of brushless DC motor in the sensor and also in the sensorless mode. Also it interprets possibilities of BLDC motor control with one faulty sensor and derivation and simulation of mathematical model. First part mentions options of rotor position sensing as well as existing methods of sensorless BLDC motor control. Second part describes control algorithms of sensor and sensorless motor control realised on device dSPACE and also realisation of faulty sensor control algorithm. Third part deals with derivation of mathematical model, its realisation using Matlab Simulink software and identification of its parameters. Last part concludes results and compares control methods used on the real system.
|
269 |
Návrh řídicího algoritmu pro elektromechanický aktuátor s výrazným suchým třením / Design of controller for electromechanical actuator with significant dry frictionVeselý, Antonín January 2015 (has links)
This work deals with identification of systems with high dry friction and/or return spring. Identified models are optimised by Parameter Estimation toolbox. Because friction and return spring have negative influence in control systems, models are used as compensators in control loop. Also effect of parameters variation is investigated in this paper.
|
270 |
Návrh opatření na snížení rizik pro společnost JOSA KOVO s.r.o. / Proposal of Measures for Risk Reduction in the Company JOSA KOVO s.r.o.Salaj, Tomáš January 2013 (has links)
Diploma thesis focuses on the analysis of selected process of company JOSA KOVO s.r.o. and on the detection of selected risks. Acquired knowledge from the theoretical part is utilized for the application of selected risk analysis method in the practical part. Detection of risks will be performed with the use of analysis of internal and external company environment and risk analysis method. Identified risks will be evaluated and with the use of acquired knowledge there will be made a proposal of recommendations and measures, which will lead to reduction of risks. Diploma thesis provides a comprehensive view of measuring and reducing risks in business environment, in terms of theoretical methods and also practical application for a selected company.
|
Page generated in 0.048 seconds