The master´s thesis focuses on modification of existing interchange Kývalka on D1 motorway. The purpose of this thesis is to design optimal solution of junction of roads I/23 and II/602 with D1 motorway connecting all directions, considering transport capacity a safety. The another part of the thesis is widening motorway D1 to six lane arrangement with one lane for slow vehicles. At first, several possible designs were suggested of which two were chosen for further elaboration as a search study. In the end, thesis contains the comparison of two chosen designs.

THE TOPIC OF THE MASTER`S THESIS IS TO VALORIZE CURRENT STATE OF THE ROAD I/43 BETWEEN SKALICE NAD SVITAVOU AND BOŘITOV, TO LOCATE IMPERFECTIONS ON THIS SECTION AND TO FIND SUITABLE VARIANT OF REROUTING ROAD ON PLANNED HIGHWAY ROUTE D43. SOLUTION INCLUDES CONNECTIONS TO THE EXISTING ROAD NETWORK AND REROUTING CROSSED ROADS.

abstract: Component simulation models, such as agent-based models, may depend on spatial data associated with geographic locations. Composition of such models can be achieved using a Geographic Knowledge Interchange Broker (GeoKIB) enabled with spatial-temporal data transformation functions, each of which is responsible for a set of interactions between two independent models. The use of autonomous interaction models allows model composition without alteration of the composed component models. An interaction model must handle differences in the spatial resolutions between models, in addition to differences in their temporal input/output data types and resolutions. A generalized GeoKIB was designed that regulates unidirectional spatially-based interactions between composed models. Different input and output data types are used for the interaction model, depending on whether data transfer should be passive or active. Synchronization of time-tagged input/output values is made possible with the use of dependency on a discrete simulation clock. An algorithm supporting spatial conversion is developed to transform any two-dimensional geographic data map between different region specifications. Maps belonging to the composed models can have different regions, map cell sizes, or boundaries. The GeoKIB can be extended based on the model specifications to be composed and the target application domain. Two separate, simplistic models were created to demonstrate model composition via the GeoKIB. An interaction model was created for each of the two directions the composed models interact. This exemplar is developed to demonstrate composition and simulation of geographic-based component models. / Dissertation/Thesis / Masters Thesis Computer Science 2019

No description available.

No description available.

While not accounting for a significant proportion of overall crashes, median crossover crashes in the state of Utah do account for a significant proportion of interstate fatalities. Due to the seriousness of median crossover crashes in the state of Utah, the need exists to evaluate the impact of median crossover crashes in the state, to identify locations where median crossover crashes may be occurring at particularly high rates, and to identify methods to help mitigate these crashes. Previous research has noted that median crossover crash rates appear to increase in the vicinity of interchanges. The purpose of this research, therefore, is to develop a strategy to mitigate median crossover crashes statewide and determine the role that the interchanges play in contributing to median crossover crashes. Fourteen years of crash data spanning the years 1992 through 2005 on Interstates 15, 70, 80, 84, and 215 were used to determine overall characteristics of median crossover crashes in Utah and determine the relationship between median crossover crashes and other types of crashes. Using a chi-square goodness of fit test, the distributions of median crossover crashes and all types of interstate crashes in the vicinity of interchanges were compared. Three-year median crossover crash rates spanning the years 2003 through 2005 for rural and urban areas were then used to identify which sections of Utah interstates are most prone to median crossover crashes. Finally, recommendations were made concerning appropriate median barrier installation for the 37 critical sections as identified by the three-year analysis.

Discrete event simulation development requires significant investments in time and resources. Descriptions of discrete event simulation models are associated with world views, including the process interaction orientation. Historically, these models have been encoded using high-level programming languages or special purpose, typically vendor-specific, simulation languages. These approaches complicate simulation model reuse and interchange. The current document-centric World Wide Web is evolving into a Semantic Web that communicates information using ontologies. The Web Ontology Language – OWL, was used to encode a Process Interaction Modeling Ontology for Discrete Event Simulations (PIMODES). The PIMODES ontology was developed using ontology engineering processes. Software was developed to demonstrate the feasibility of interchanging models from commercial simulation packages using PIMODES as an intermediate representation. The purpose of PIMODES is to provide a vendor-neutral open representation to support model interchange. Model interchange enables reuse and provides an opportunity to improve simulation quality, reduce development costs, and reduce development times.

The Cannibal system, comprised of an activated sludge process integrated with a side stream anaerobic bioreactor, is capable of reducing excess sludge up to 60% compared to the conventional activated sludge process. The hydraulic retention time (HRT) in the Cannibal bioreactor and the interchange rate (the percent of sludge by mass interchanged between the activated sludge system and the bioreactor on daily basis) are the two important operational parameters in the optimization of the Cannibal process. This research was designed to investigate the effect of the Cannibal bioreactor hydraulic retention time and the interchange rate on the solids destruction in the system. The first phase of this study has looked at the effect of three different HRTs, 5 day, 7 day and 10 day. The interchange rate during phase I was 10%. The results showed that the 7 day HRT can be recommended as the minimum retention period for the Cannibal process. The 5 day HRT Cannibal system had some settling problems and high volatile fatty acid content compared to the 7 day HRT Cannibal system. The protein and polysaccharide tests showed that the Cannibal bioreactor is primarily involved in the release of biopolymers which are degraded in the aerobic environment. The second part of this study focused on the effect of the interchange rate (IR) on the solids destruction in the system. The interchange rates that were applied in the system were 15%, 10%, 7%, 5% and 4%.The HRT in the Cannibal bioreactor was 7 day. The results showed that the 10% interchange rate gave maximum solids destruction than the other interchange rates. This implies that 10% is an optimum IR for the Cannibal system. Apart from higher solids wastage, the 4% and 5% IR Cannibal systems had higher volatile fatty acid production. / Master of Science

Automated programming assignment grading tools have become integral to CS courses at introductory as well as advanced levels. However a lot of these tools have their own custom approaches to setting up assignments and describing how solutions should be tested, requiring instructors to make a significant learning investment to begin using a new tool. In addition, differences between tools mean that initial investment must be repeated when switching tools or adding a new one. Worse still, tool-specific strategies further reduce the ability of educators to share and reuse their assignments. As a solution to this problem, we describe our experiences working with PEML, the Programming Exercise Markup Language, which provides an easy to use, instructor friendly approach for writing programming assignments. Unlike tool-oriented data interchange formats, PEML is designed to provide a human friendly authoring format that has been developed to be intuitive, expressive and not be a technological or notational barrier to instructors. We describe the design of PEML and also discuss its implementation as a programming library, a web application, and a microservice that provides full parsing and rendering capabilities for easy integration into any tools or scripting libraries. We also describe the integration of PEML into two automated testing and grading tools used at Virginia Tech by the CS department: Code Workout and Web-CAT. We then describe our experiences using PEML to describe a full range of programming assignments, laboratory exercises, and small coding questions of varying complexity in demonstrating the practicality of the notation. We evaluate the feasibility of PEML using this encoding exercise as well as the effect of its integration into the aforementioned automated grading tools. We finally present a framework for integrating PEML into existing grading tools and then draw our conclusions as well as list down avenues PEML can be expanded into in the future. / Master of Science / Automated grading tools have become ubiquitous to CS courses focused on programming concepts at both the undergraduate as well as graduate level. These tools allow instructors to provide near instant feedback to students as well as spend more time focusing on the curriculum rather than grading. However, these tools use a variety programming assignment representation formats and without a standardized representation, instructors and educators may struggle to share and reuse assignments across different tools and platforms. To address this need, we have developed the Programming Exercise Markup Language (PEML), a standardized format for representing programming exercises, designed to be human-friendly as well as easy to learn and use. PEML includes information about the problem statement, input and output formats, constraints, and sample test cases, and can be used for a wide range of exercise types and programming languages. As part of this master's thesis project, we encoded 50 assignments of varying size and difficulty into PEML as well as integrated support for PEML into Web-CAT and Code Workout, two commonly used automated grading tools used at Virginia Tech. Building upon our experience performing this task, we also designed a framework that can be utilized when integrating PEML into other automated grading tools. By providing a standardized way of representing programming assignments, PEML can help to streamline programming education and make it easier for instructors and educators to create and share assignments across different tools and platforms.

No / Purpose – This paper aims to examine the role of e-commerce in hospital pharmacy in the procurement of pharmaceuticals and determine how this has improved the internal pharmaceutical supply chain. Whilst e-commerce is in its infancy in this area it is still considered to be an important facet of supply chain management. E-trading within NHS pharmacies is conducted via electronic data interchange (EDI) offering proven benefits and ensuring the efficient and effective transmission of data between remote parties. Design/methodology/approach – The data were collected via a case-study in an NHS trust pharmacy supported and by questionnaires distributed to NHS and community pharmacies in the north-west of England. Findings – The findings support the view that there are benefits to be gained from introducing EDI into a purchasing department as the next logical step towards a total e-commerce solution (internet-based) and instigating quality improvements. It also proposes that the implementation and use of e-commerce in hospital pharmacies can be aligned with progress made in small- to medium-sized enterprises (SMEs), and questions why, if such benefits can be realised, the use of e-commerce systems are not more widespread. Research limitations/implications – The implications of this research is that it offers a “snap-shot” of progress made-to-date of e-commerce in NHS Pharmacy, which can provide guidance for mangers and healthcare professionals managing their e-commerce/quality improvement agenda. The research conducted was restricted to a specific regional area of the NHS and could be applied to a larger national sample group. Future research within this field should also consider the cost of not introducing e-commerce in pursuing quality improvement. Originality/value – This discussion offers an insight into how a pharmacy approached EDI, and this is further supported by recent research conducted into examining the pharmacy systems in operation in the north-west of England and accompanying EDI systems and an analysis of EDI uptake and use in a sample of pharmacies in the same region, the latter being supported by anecdotal evidence of pros and cons to using EDI and potential barriers to its introduction.