In this thesis electron generation is studied via laser plasma interaction known as laser wakefield acceleration in two regimes of weakly relativistic and highly relativistic laser intensity regimes. The plasma targets consisted of gas jets photonionized by rising edge of the laser pulse to densities as high as 10^20cm3. In the weakly relativistic regime, 210 mJ at 33 fs were focused to intensities of up to 310^18 Wcm2 on the gas targets of 2.4 mm length. In the highly relativistic regime, 3 J of energy compressed in 30 fs were delivered at intensity as high as 6.5 10^18 Wcm2 on targets of 2.4, 5, and 10 mm. Monoenergetic electrons in tens of MeV were observed in weakly relativistic regime, while electron energies as high as 300 MeV were observed in highly relativistic regime. Higher input laser intensity and prepulse levels were found to enhance electron production. Scaling of energy and stability of electron generation were also studied. / Photonics and Plasmas

No description available.

The thesis at hand addresses design, characterization and experimental testing of pulsed high-field magnets for utilization in the field of laser-plasma physics. The central task was to establish a technology platform that allows to manipulate laser-driven ion sources in a way that the accelerated ions can be used in complex application studies, e.g. radiobiological cell or tumor irradiation. Laser-driven ion acceleration in the regime of target normal sheath acceleration (TNSA) offers the unique opportunity to accelerate particles to kinetic energies of few 10MeV on the micrometer scale. The generated bunches are short, intense, show broad exponentially decaying energy spectra and high divergence. In order to efficiently use the generated particles, it is crucial to gain control over their divergence directly after their production. For most applications it additionally is favorable to reduce the energy spread of the beam. This work shows that the developed pulsed high-field magnets, so-called solenoids (cylindrical magnets), can efficiently capture, transport and focus laser-accelerated protons. The chromaticity of the magnetic lens thereby provides for energy selection. Three prototype solenoids, adapted to fit different application scenarios, and associated current pulse drivers have been developed. The magnets generate fields of several 10 T. Pulse durations are of the order of one millisecond and thus the fields can be considered as quasi-static for laser-plasma interaction processes taking place on the ps- to ns-scale. Their high field strength in combination with abandoning magnetic cores make the solenoids compact and light-weight. The presented experiments focus on a solenoid magnet designed for the capture of divergent laser-driven ion beams. They have been carried out at the 6MV tandetron accelerator and the laser acceleration source Draco of Helmholtz-Zentrum Dresden – Rossendorf as well as at the PHELIX laser of GSI Helmholtzzentrum für Schwerionenforschung, Darmstadt.

After nearly 100 years of particle acceleration, particle accelerator experiments continue providing results within the field of high energy physics. Particle acceleration is used worldwide in practical applications such as radiation therapy and materials science research. Unfortunately, these accelerators are large and expensive. Dielectric Laser Acceleration (DLA) is a promising technique for accelerating particles with high acceleration gradients, without requiring large-scale accelerators. DLA utilizes the electric field of a high energy laser to accelerate electrons in the proximity of a nanostructured dielectric surface.The aim of this project was limited to laser beam routing and imaging techniques for a DLA experiment. The goal was to design the laser beam pathway between the laser and the dielectric sample, and testing a proposed imaging system for aiming the laser. This goal was achieved in a test setup using a low-energy laser. In the main setup including a femtosecond laser, the result indicated lack of focus. For a full experimental setup, a correction of this focus is essential and the beam path would need to be combined with a Scanning Electron Microscope (SEM) as an electron source.

Accurate single-shot visualization of laser wakefield structures can improve our fundamental understanding of plasma-based accelerators. Previously, frequency domain holography (FDH) was used to visualize weakly nonlinear sinusoidal wakes in plasmas of density n[subscript e] < 0.6 × 10¹⁹/cm³ that produced few or no relativistic electrons. Here, I address the more challenging task of visualizing highly nonlinear wakes in plasmas of density n[subscript e] ~ 1 to 3× 10¹⁹/cm³ that can produce high-quality relativistic electron beams. Nonlinear wakes were driven by 30 TW, 30 fs, 800 nm pump pulses. When bubbles formed, part of a 400 nm, co-propagating, overlapping probe pulse became trapped inside them, creating a light packet of plasma wavelength dimensions--that is, an optical "bullet"--that I reconstruct by FDH methods. As ne increased, the bullets first appeared at 0.8 × 10¹⁹/cm³, the first observation of bubble formation below the electron capture threshold. WAKE simulations confirmed bubble formation without electron capture and the trapping of optical bullets at this density. At n[subscript] >1× 10¹⁹/cm³, bullets appeared with high shot-to-shot stability together with quasi-monoenergetic relativistic electrons. I also directly observed the temporal walk-off of the optical bullet from the beam-loaded plasma bubble revealed by FDH phase shift data, providing unprecedented visualization of the electron injection and beam loading processes. There are five chapters in this thesis. Chapter 1 introduces general laser plasma- based accelerators (LPA). Chapter 2 discusses the FDH imaging technique, including the setup and reconstruction process. In 2006, Dr. N. H. Matlis used FDH to image a linear plasma wakefield. His work is also presented in Chapter 2 but with new analyses. Chapter 3, the main part of the thesis, discusses the visualization of LPAs in the bubble regime. Chapter 4 presents the concept of frequency domain tomography. Chapter 5 suggests future directions for research in FDH. / text

Motivation: Radiotherapy is an important modality in cancer treatment commonly using photon beams from compact electron linear accelerators. However, due to the inverse depth dose profile (Bragg peak) with maximum dose deposition at the end of their path, proton beams allow a dose escalation within the target volume and reduction in surrounding normal tissue. Up to 20% of all radiotherapy patients could benefit from proton therapy (PT). Conventional accelerators are utilized to obtain proton beams with therapeutic energies of 70 – 250 MeV. These beams are then transported to the patient via magnetic transferlines and a rotatable beamline, called gantry, which are large and bulky. PT requires huge capex, limiting it to only a few big centres worldwide treating much less than 1% of radiotherapy patients. The new particle acceleration by ultra-intense laser pulses occurs on micrometer scales, potentially enabling more compact PT facilities and increasing their widespread. These laser-accelerated proton (LAP) bunches have been observed recently with energies of up to 90 MeV and scaling models predict LAP with therapeutic energies with the next generation petawatt laser systems. Challenges: Intense pulses with maximum 10 Hz repetition rate, broad energy spectrum, large divergence and short duration characterize LAP beams. In contrast, conventional accelerators generate mono-energetic, narrow, quasi-continuous beams. A new multifunctional gantry is needed for LAP beams with a capture and collimation system to control initial divergence, an energy selection system (ESS) to filter variable energy widths and a large acceptance beam shaping and scanning system. An advanced magnetic technology is also required for a compact and light gantry design. Furthermore, new dose deposition models and treatment planning systems (TPS) are needed for high quality, efficient dose delivery. Materials and Methods: In conventional dose modelling, mono-energetic beams with decreasing energies are superimposed to deliver uniform spread-out Bragg peak (SOBP). The low repetition rate of LAP pulses puts a critical constraint on treatment time and it is highly inefficient to utilize conventional dose models. It is imperative to utilize unique LAP beam properties to reduce total treatment times. A new 1D Broad Energy Assorted depth dose Deposition (BEAD) model was developed. It could deliver similar SOBP by superimposing several LAP pulses with variable broad energy widths. The BEAD model sets the primary criteria for the gantry, i.e. to filter and transport pulses with up to 20 times larger energy widths than conventional beams for efficient dose delivery. Air-core pulsed magnets can reach up to 6 times higher peak magnetic fields than conventional iron-core magnets and the pulsed nature of laser-driven sources allowed their use to reduce the size and weight of the gantry. An isocentric gantry was designed with integrated laser-target assembly, beam capture and collimation, variable ESS and large acceptance achromatic beam transport. An advanced clinical gantry was designed later with a novel active beam shaping and scanning system, called ELPIS. The filtered beam outputs via the advanced gantry simulations were implemented in an advanced 3D TPS, called LAPCERR. A LAP beam gantry and TPS were brought together for the first time, and clinical feasibility was studied for the advanced gantry via tumour conformal dose calculations on real patient data. Furthermore, for realization of pulsed gantry systems, a first pulsed beamline section consisting of prototypes of a capturing solenoid and a sector magnet was designed and tested at tandem accelerator with 10MeV pulsed proton beams. A first air-core pulsed quadrupole was also designed. Results: An advanced gantry with the new ELPIS system was designed and simulated. Simulated results show that achromatic beams with actively selectable beam sizes in the range of 1 – 20 cm diameter with selectable energy widths ranging from 19 – 3% can be delivered via the advanced gantry. ELPIS can also scan these large beams to a 20 × 10 cm2 irradiation field. This gantry is about 2.5 m in height and about 3.5 m in length, which is about 4 times smaller in volume than the conventional PT gantries. The clinical feasibility study on a head and neck tumour patient shows that these filtered beams can deliver state-of-the-art 3D intensity modulated treatment plans. Experimental characterization of a prototype pulsed beamline section was performed successfully and the synchronization of proton pulse with peak magnetic field in the individual magnets was established. This showed the practical applicability and feasibility of pulsed beamlines. The newly designed pulsed quadrupole with three times higher field gradients than iron-core quadrupoles is already manufactured and will be tested in near future. Conclusion: The main hurdle towards laser-driven PT is a laser accelerator providing beams of therapeutic quality, i.e. energy, intensity, stability, reliability. Nevertheless, the presented advanced clinical gantry design presents a complete beam transport solution for future laser-driven sources and shows the prospect and limitations of a compact laser-driven PT facility. Further development in the LAP-CERR is needed as it has the potential to utilize advanced beam controls from the ELPIS system and optimize doses on the basis of advanced dose schemes, like partial volume irradiation, to bring treatment times further down. To realize the gantry concept, further research, development and testing in higher field and higher (up to 10 Hz) repetition rate pulsed magnets to cater therapeutic proton beams is crucial.

Afin de protéger leurs systèmes de détection de l'impulsion électromagnétique géante générée par l'interaction du laser PETAL avec sa cible, les diagnostics de PETAL seront équipés de détecteurs passifs. Pour les ensembles SEPAGE et SESAME, une combinaison d'Imaging Plates (IP) et de couches de protection de matériaux de grand numéro atomique sera utilisée, qui permettra: 1) d'assurer que la réponse des détecteurs sera indépendante de son environnement mécanique proche dans les diagnostics et donc homogène sur toute la détection, 2) de blinder les détecteurs contre les photons de haute énergie produits dans la cible de PETAL. Dans le travail présenté ici, nous avons réalisé des expériences d'étalonnage avec les IPs auprès d'installations générant des électrons, des protons ou des ions, dans le but de couvrir le domaine en énergie cinétique de la détection des particules chargées de PETAL, de 0.1 à 200 MeV. L'introduction a pour but de décrire les méthodes et outils utilisés au cours de cette étude. Le second chapitre présente les résultats de deux expériences réalisées avec des électrons dans le domaine d'énergie cinétique [5-180] MeV. Le troisième chapitre décrit une expérience et ses résultats avec les protons entre 80 et 200 MeV étaient envoyés sur nos détecteurs. Le quatrième chapitre est consacré à une expérience utilisant des protons et des ions entre1 et 22 MeV en énergie de protons et dont l'objectif était l'étude de détecteurs et le test du démonstrateur de SEPAGE. Nous avons utilisé GEANT4 pour l'analyse de nos données et prédire la réponse de nos détecteurs dans le domaine 0.1 à 1000 MeV. / In order to protect their detection against the giant electromagnetic pulse generated by the interaction of the PETAL laser with its target, PETAL diagnostics will be equipped with passive detectors. For SESAME and SEPAGE systems, a combination of imaging plate (IP) detectors with high-Z material protection layers will be used to provide additional features such as: 1) Ensuring a response of the detector to be independent of its environment and hence homogeneous over the surface of the diagnostics; 2) Shielding the detectors against high-energy photons from the PETAL target. In this work, calibration experiments of such detectors based on IPs were performed at electron and proton facilities with the goal of covering the energy range of the particle detection at PETAL from 0.1 to 200 MeV. The introduction aims at providing the reader the methods and tools used for this study. The second chapter presents the results of two experiments performed with electrons in the range from 5 to 180 MeV. The third chapter describes an experiment and its results, where protons in the energy range between 80 and 200 MeV were sent onto detectors. The fourth chapter is dedicated to an experiment with protons and ions in the energy range from 1 to 22 MeV proton energy, which aimed at studying our detector responses and testing the demonstrator of the SEPAGE diagnostic. We used the GEANT4 toolkit to analyse our data and compute the detection responses on the whole energy range from 0.1 to 1000 MeV.

No description available.