1 |
Study on the near-shore fishery resources and management-A case study on Tainan coastLin, Yuong-Shiu 22 April 2011 (has links)
This research includes investigations of the ocean water quality of Tainan, its contamination sources and examines its relations to the fishing industry. It also explores the connection between topographical changes and evolution of the Tainan fishing industry and by using relevant information of ocean weather, tidal waves, wind speed, wind direction, and typhoon to study its relatedness to the developments of the fishing industry. It will further look at the role of the government in pollution prevention measures of the ocean, which specific laws and regulations must be setup and put into motion, so it can have a key role and have authoritative power. The quality of the marine environment has obviously deteriorated as the economy developed, and public hazard signals should become a severe issue that the government should face. Marine biological resources are common assets of the humankind and it is closely related to human survival, therefore, marine ecosystem must be properly preserved so it can maintain its most natural state and its resources can be sustained for our next generation to enjoy.
The conclusions of this research includes suggestions for planning marine contamination report system and advice the government to set up an award system to encourage local coastal residents and fishermen to establish marine patrol volunteer organizations and report immediately if they discover any oil contamination in the ocean. Also, to target the characteristic of fishing industry depending on natural resources, it offers a suggested direction for important policies of reinforcing environmental protection and resource preservation and recommends putting in as much protective reef as possible within 3 nautical miles, which are designed to stop trawling nets but does not damage fishing gears. It also advocates waste reduction and reuse of recycled items and by following the treatment method for sewage, if we can transform wastes into usable resources and naturally reduce the pressure of further treatments, the proper handling for marine wastes should be cautiously designed in order to directly and effectively resolve the problem of large amount of wastes. It calls upon the government to appropriately develop, use, and sustainably manage the rich marine resources that we possess. In addition to reinforcing marine-related laws and regulations (amendment), it also aims to strengthen the protection and management of marine territory, actively engage in related research and development of marine resource use to enhance the development of our nation¡¦s marine resources, the technology, and its standards. Finally, by investigating from a sustainable use of the ocean point of view, it is possible to explore new directions for the future developments of the fishing industry and propose possible development strategies, and by examining the current condition of Tainan's coastal fisheries resources, it offers relevant resource management plans for industry-related management units and businesses to take into consideration. Our nation has the ability and conditions to develop marine industry and under the demands of international competition and domestic development, a continuation for the marine industry development is of absolute importance and necessity.
|
2 |
A capacidade absortiva e as atividades de inovação em pequenas empresas : um estudo de múltiplos casos na indústria náutica brasileiraVidal, Valéria Schneider January 2014 (has links)
Com base na literatura sobre capacidade absortiva e nos estudos de inovação, argumenta-se neste trabalho que a capacidade absortiva influencia as atividades de de inovação. O modelo de capacidade absortiva utilizado foi o de Zahra e George (2002), que tem por base a capacidade absortiva potencial (dimensões de aquisição e assimilação) e capacidade absortiva realizada (dimensões de transformação e exploração (exploitation)). A inovação foi entendida como um processo que pode gerar inovações organizacionais, em produtos e processos, e de marketing. Este estudo tem por foco, porém, inovações de produtos e processos. Dessa forma, com o objetivo de entender como a capacidade absortiva influencia a inovação de produtos e processos em micro e pequenas empresas brasileiras, o presente estudo adotou uma abordagem qualitativa, por meio da investigação sob a forma de múltiplos casos. Para isso, foram desenvolvidos dois estudos de casos no segmento da indústria náutica. Os casos foram analisados em separado e depois foram comparados, buscando semelhanças que ampliassem a compreensão do fenômeno. Os resultados sugerem que há uma influência positiva da capacidade absortiva nas atividades de inovação das micro e pequenas empresas da indústria náutica brasileira. Alguns elementos diferenciais foram encontrados, como o fato de que, nos casos estudados, o processo de inovação se inicia a partir da experiência acumulada, da percepção dos proprietários, das informações oriundas de clientes e velejadores e das informações obtidas junto aos fornecedores. Outro elemento foi de que há, por vezes, um processo de realimentação entre as dimensões de assimilação e transformação, mesmo que curto, antes da informação ser explorada (exploited) sob a forma de novos produtos ou de processos mais eficientes. Por fim, foi encontrado que o nível de desenvolvimento da capacidade absortiva influencia na inovação de produtos e processos. A contribuição final do estudo se compõe de um framework integrado que demonstra a influência e o funcionamento da capacidade absortiva na geração de inovações de produtos e processos nas empresas estudadas. / Based on the literature on absorptive capacity and innovation studies, it is argued in this research that the absorptive capacity influences the activities of innovation. It was used the model of absorptive capacity of Zahra and George (2002), which is based on the potential absorptive capacity comprised by the dimensions of acquisition and assimilation, and on realized absorptive capacity, based on the dimensions of transformation and exploitation. Innovation is understood as a process that can generate innovations in products and processes, services, organization and marketing. However, this study focuses on innovations in products and processes. Thus, in order to understand how the absorptive capacity influences the innovation of products and processes in Brazilian micro and small firms, this study adopted a qualitative approach. A multiple cases study was conducted in the marine industry. The two cases were analyzed separately and then compared, looking for similarities that would broaden the understanding of the phenomenon. The results suggest a positive influence of absorptive capacity on innovation activities of micro and small firms in the Brazilian marine industry. Some differential elements were found, such as the fact that, in the cases studied, the process of innovation starts from the accumulated experience, the perception of the owners, the information from customers and sailors and the information obtained from the suppliers. Another factor is that there is sometimes a feedback process between the dimensions of assimilation and transformation, even though short, before the information is exploited in the form of new products and more efficient processes. Finally, it was found that the level of development of absorptive capacity influences the innovation of products and processes. The final contribution of this study consists of an integrative framework that demonstrates the influence and operation of absorptive capacity in generating innovation of products and processes in micro and small firms.
|
3 |
A capacidade absortiva e as atividades de inovação em pequenas empresas : um estudo de múltiplos casos na indústria náutica brasileiraVidal, Valéria Schneider January 2014 (has links)
Com base na literatura sobre capacidade absortiva e nos estudos de inovação, argumenta-se neste trabalho que a capacidade absortiva influencia as atividades de de inovação. O modelo de capacidade absortiva utilizado foi o de Zahra e George (2002), que tem por base a capacidade absortiva potencial (dimensões de aquisição e assimilação) e capacidade absortiva realizada (dimensões de transformação e exploração (exploitation)). A inovação foi entendida como um processo que pode gerar inovações organizacionais, em produtos e processos, e de marketing. Este estudo tem por foco, porém, inovações de produtos e processos. Dessa forma, com o objetivo de entender como a capacidade absortiva influencia a inovação de produtos e processos em micro e pequenas empresas brasileiras, o presente estudo adotou uma abordagem qualitativa, por meio da investigação sob a forma de múltiplos casos. Para isso, foram desenvolvidos dois estudos de casos no segmento da indústria náutica. Os casos foram analisados em separado e depois foram comparados, buscando semelhanças que ampliassem a compreensão do fenômeno. Os resultados sugerem que há uma influência positiva da capacidade absortiva nas atividades de inovação das micro e pequenas empresas da indústria náutica brasileira. Alguns elementos diferenciais foram encontrados, como o fato de que, nos casos estudados, o processo de inovação se inicia a partir da experiência acumulada, da percepção dos proprietários, das informações oriundas de clientes e velejadores e das informações obtidas junto aos fornecedores. Outro elemento foi de que há, por vezes, um processo de realimentação entre as dimensões de assimilação e transformação, mesmo que curto, antes da informação ser explorada (exploited) sob a forma de novos produtos ou de processos mais eficientes. Por fim, foi encontrado que o nível de desenvolvimento da capacidade absortiva influencia na inovação de produtos e processos. A contribuição final do estudo se compõe de um framework integrado que demonstra a influência e o funcionamento da capacidade absortiva na geração de inovações de produtos e processos nas empresas estudadas. / Based on the literature on absorptive capacity and innovation studies, it is argued in this research that the absorptive capacity influences the activities of innovation. It was used the model of absorptive capacity of Zahra and George (2002), which is based on the potential absorptive capacity comprised by the dimensions of acquisition and assimilation, and on realized absorptive capacity, based on the dimensions of transformation and exploitation. Innovation is understood as a process that can generate innovations in products and processes, services, organization and marketing. However, this study focuses on innovations in products and processes. Thus, in order to understand how the absorptive capacity influences the innovation of products and processes in Brazilian micro and small firms, this study adopted a qualitative approach. A multiple cases study was conducted in the marine industry. The two cases were analyzed separately and then compared, looking for similarities that would broaden the understanding of the phenomenon. The results suggest a positive influence of absorptive capacity on innovation activities of micro and small firms in the Brazilian marine industry. Some differential elements were found, such as the fact that, in the cases studied, the process of innovation starts from the accumulated experience, the perception of the owners, the information from customers and sailors and the information obtained from the suppliers. Another factor is that there is sometimes a feedback process between the dimensions of assimilation and transformation, even though short, before the information is exploited in the form of new products and more efficient processes. Finally, it was found that the level of development of absorptive capacity influences the innovation of products and processes. The final contribution of this study consists of an integrative framework that demonstrates the influence and operation of absorptive capacity in generating innovation of products and processes in micro and small firms.
|
4 |
A capacidade absortiva e as atividades de inovação em pequenas empresas : um estudo de múltiplos casos na indústria náutica brasileiraVidal, Valéria Schneider January 2014 (has links)
Com base na literatura sobre capacidade absortiva e nos estudos de inovação, argumenta-se neste trabalho que a capacidade absortiva influencia as atividades de de inovação. O modelo de capacidade absortiva utilizado foi o de Zahra e George (2002), que tem por base a capacidade absortiva potencial (dimensões de aquisição e assimilação) e capacidade absortiva realizada (dimensões de transformação e exploração (exploitation)). A inovação foi entendida como um processo que pode gerar inovações organizacionais, em produtos e processos, e de marketing. Este estudo tem por foco, porém, inovações de produtos e processos. Dessa forma, com o objetivo de entender como a capacidade absortiva influencia a inovação de produtos e processos em micro e pequenas empresas brasileiras, o presente estudo adotou uma abordagem qualitativa, por meio da investigação sob a forma de múltiplos casos. Para isso, foram desenvolvidos dois estudos de casos no segmento da indústria náutica. Os casos foram analisados em separado e depois foram comparados, buscando semelhanças que ampliassem a compreensão do fenômeno. Os resultados sugerem que há uma influência positiva da capacidade absortiva nas atividades de inovação das micro e pequenas empresas da indústria náutica brasileira. Alguns elementos diferenciais foram encontrados, como o fato de que, nos casos estudados, o processo de inovação se inicia a partir da experiência acumulada, da percepção dos proprietários, das informações oriundas de clientes e velejadores e das informações obtidas junto aos fornecedores. Outro elemento foi de que há, por vezes, um processo de realimentação entre as dimensões de assimilação e transformação, mesmo que curto, antes da informação ser explorada (exploited) sob a forma de novos produtos ou de processos mais eficientes. Por fim, foi encontrado que o nível de desenvolvimento da capacidade absortiva influencia na inovação de produtos e processos. A contribuição final do estudo se compõe de um framework integrado que demonstra a influência e o funcionamento da capacidade absortiva na geração de inovações de produtos e processos nas empresas estudadas. / Based on the literature on absorptive capacity and innovation studies, it is argued in this research that the absorptive capacity influences the activities of innovation. It was used the model of absorptive capacity of Zahra and George (2002), which is based on the potential absorptive capacity comprised by the dimensions of acquisition and assimilation, and on realized absorptive capacity, based on the dimensions of transformation and exploitation. Innovation is understood as a process that can generate innovations in products and processes, services, organization and marketing. However, this study focuses on innovations in products and processes. Thus, in order to understand how the absorptive capacity influences the innovation of products and processes in Brazilian micro and small firms, this study adopted a qualitative approach. A multiple cases study was conducted in the marine industry. The two cases were analyzed separately and then compared, looking for similarities that would broaden the understanding of the phenomenon. The results suggest a positive influence of absorptive capacity on innovation activities of micro and small firms in the Brazilian marine industry. Some differential elements were found, such as the fact that, in the cases studied, the process of innovation starts from the accumulated experience, the perception of the owners, the information from customers and sailors and the information obtained from the suppliers. Another factor is that there is sometimes a feedback process between the dimensions of assimilation and transformation, even though short, before the information is exploited in the form of new products and more efficient processes. Finally, it was found that the level of development of absorptive capacity influences the innovation of products and processes. The final contribution of this study consists of an integrative framework that demonstrates the influence and operation of absorptive capacity in generating innovation of products and processes in micro and small firms.
|
5 |
The management of public-private partnerships in restructuring the South African marine industry towards sustainable developmentArendse, Paul January 2003 (has links)
Masters in Public Administration - MPA / In the dissertation entitled The Management of Public-Private Partnerships in restructuring the South African marine industry towards sustainable development the author explores the thematic study of sustainable development through Public-Private Partnerships. The setting of the research project is a southern Africa case study of the marine industry in South Africa. The study develops a conceptual framework of how the contemporary discourse of sustainable development, namely, Public-Private Partnerships, could be applied in creating an environment for human security by restructuring its marine resource institutional economics towards community development enterprises. The objective of the study is to develop a conceptual sustainable resource management model that proposes new institutional arrangements between social, economic, environmental and political actors and stakeholders in the marine industry through Public-Private Partnerships. The thesis concludes to demonstrate how this resource management model result in equitable outcomes within the new institutional arrangements between the different actors and stakeholder in a Public-Private co-management system. It hereby applies the development discourse of Public-Private Partnerships in restructuring South African marine resource management towards sustainable development.
|
6 |
Diving into venture creation : An exploratory study of how external enabler combinations facilitate sustainable venture creation in the marine sectorEriksson, Rebecca Olivia, Regoczi, Benedek January 2023 (has links)
Rapidly increasing global environmental changes are causing disruptions in the natural environment and have resulted in emphasized importance of developing sustainable entrepreneurship to mitigate climate change. To do this, however, external conditions have been argued to stimulate new business opportunities, which have been reconceptualized as external enablers (Davidsson, 2015). This study will therefore investigate how combinations of external enablers can be understood and leveraged to facilitate new sustainable venture creation within one of the sectors with the potential to reverse climate change, the marine sector. Thus, the aim of this study is to assess the combinations of external enablers that facilitate venture creation within the marine sector. The study was conducted in accordance with the interpretivist approach, basing the data collection on multiple case studies. The case studies were based on secondary online data and semi-constructed interviews, where the data was later analyzed through a coding process according to Gioia et al., (2013). The study was set to follow an inductive approach. The empirical findings show that the prominent external enabler combinations for sustainable ventures within the marine sector are of the regulatory, economic and sociocultural types which have a complementary relationship and act in symbiosis. The symbiosis is in turn affected by climate change as a fundamental enabling factor for sustainable ventures.
|
7 |
Yacht Fin Stabilisers : Enhancing the User Experience and Sustainability in the Field of Industrial Design EngineeringPihlgren, Jon, Svensson, Karl January 2024 (has links)
This master thesis delves into the design and aesthetics of a specific product in the marine industry, a stabiliser fin. The thesis is in collaboration with the company Humphree which develops and sells one of these fins. The Humphree all-speed fins are mounted on yachts to stabilise the vessel while cruising as well as at zero speed. The fins provide the user with stability and increase the comfort for the whole crew while optimising fuel efficiency. As this fin withstands huge loads and forces the fin should be trustworthy and express so as well. As of today, these criteria might not be fully fulfilled. This is part of the first aim of this thesis, “How can the design be updated to align with customer’s desires?”. Humphree focus is to stabilise marine vessels with their two main products, the stabiliser fins, and their Interceptors. As Humphree grows, the company should explore new markets within the marine area and create products with a common thread, which is a part of the second aim of this thesis “How can the product better showcase its capabilities?”. As the world faces environmental complications and risks, Humphree wants to do their part in the area. The marine market is already seen as a villain in this area, especially in the private sector. This is something that could, and should, be improved as a big part of the world’s population seeks more environmental products. This is investigated in the final aim, “How can the environmental impact of the product be reduced?”. Throughout the pilot study, the principles of Human-Centred design were applied to enhance the quality of the research and facilitate the identification of correlations between information instances. The primary objective was to conduct a pilot study to identify the future requirements for stabiliser fins. This involved primarily interviewing assemblers and people from Humphree, as well as benchmarking and lastly a design review was held to determine the necessary technical solutions. Secondly, a new concept of the fin should be made according to the findings from the pilot study. The thesis resulted in that the new concept should have a material change to aluminium instead of carbon fibre. The aluminium enhances the fin’s robustness and enables repairability, thus improving its environmental friendliness. Design adjustments to the exterior were made to align with Humphree’s product design, optimize mounting efficiency and enhance the fin´s robust appearance. However, the design changes were small as the pilot study confirmed the effectiveness of the current fin design. / Detta arbete fördjupar sig i design och estetik av en specifik produkt inom marinindustrin, en stabiliseringsfena. Arbetet sker i samarbete med företaget Humphree som utvecklar och säljer en av dessa fenor. Humphree’s allspeedfenor monteras på yachter för att stabilisera båten både under färd och stillastående. Fenorna ger användaren stabilitet och ökar komforten för hela besättningen samtidigt som de optimerar bränsleeffektiviteten. Eftersom denna fena utsätts för enorma belastningar och krafter bör fenan vara pålitlig samt förmedla en sådan känsla. Dessa kriterier uppfylls inte idag, och är därför en del av den första målsättningen för denna uppsats, “Hur kan designen uppdateras för att stämma överens med kundens förväntningar?”. Humphree’s fokus är att stabilisera marina fartyg med sina två huvudprodukter, stabiliseringsfenor och deras Interceptorer. Samtidigt som Humphree växer bör företaget utforska nya marknader inom den marina sektorn och skapa produkter med gemensamma designkaraktäristiska drag, vilket är en del av den andra målsättningen för denna uppsats, “Hur kan produkten bättre visa sina förmågor?”. Den marina marknaden ses redan som en bov till miljöpåverkan, särskilt inom den privata sektorn. Detta är något som skulle kunna, och bör, förbättras då en stor del av världens befolkning efterfrågar mer miljövänliga produkter. Detta undersöks i den sista målsättningen, “Hur kan den miljömässiga påverkan av produkten minskas?”. Under pilotstudien tillämpades principerna för användarcentrerad design för att förbättra forskningskvaliteten och underlätta identifieringen av samband mellan olika informationsinstanser. Huvudsyftet var att genomföra en pilotstudie för att identifiera framtida krav för stabiliseringsfenor. Detta innebar främst intervjuer med montörer och personer från Humphree, samt benchmarking och slutligen en designgranskning för att fastställa nödvändiga tekniska lösningar. För det andra skulle ett nytt koncept av fenan utformas enligt resultaten från pilotstudien. Arbetet resulterade i att det nya konceptet skulle ha ett materialbyte från kolfiber till aluminium. Aluminium förbättrar fenans robusthet och möjliggör reparation, vilket därmed förbättrar dess miljövänlighet. Designjusteringar av exteriören gjordes för att anpassa sig till Humphree’s produktdesign, optimera monteringsprocessen och förstärka fenans robusta utseende. Designändringarna var dock små eftersom pilotstudien bekräftade att den nuvarande fenans design var effektiv
|
Page generated in 0.0608 seconds