Material discovery and development has been playing a significant role in shaping human civilizations, by studying and improving materials for appealing observations to aid in our survival as well as to satisfy our curiosity. From the common earthly materials that give us strong building structures and hunting weapons to the Silicon Age that contributes to the creation of modern electronics and computers, the development of novel and enhanced materials continues to grow. Recently, a new field has emerged that is rapidly expanding the engineering circle; these are called nanomaterials. By shrinking bulk materials into structures with nanoscale dimensions, there is a deviation from classical physics, and quantum effects begin to dominate the properties of these materials. The nanometer range brings a high surface area-volume ratio which enhances the reactivity of the material, and thus size-dependent properties are materialized. Such behaviors can be applicable in several areas such as biomedical, catalysis, optics, processing, sensing and more. Nanomaterials can be further functionalized to grant new and enhanced functions, features and capabilities needed for a specific application. This dissertation aids to explore the functionalization of 1D and 2D nanomaterials for various applications. The proposed 1D and 2D nanostructures for testing will be polymer hydrogel nanofibers and silica nanoparticulate thin films, respectively. Nanofibers are unique by acting like swollen nanoreactors to enable functionalization via aqueous absorption and reaction. Silica nanoparticulate films have high nano-porosity, which can wet the thin coating intrinsically with aqueous and organic solvents or with non-organic solvents upon additional surface chemistry modification. In this dissertation, the functionalization of 1D and 2D nanostructures with chemical compounds and metal colloids will be tested, and the performance of the nanomaterials and nanocomposites for various applications will be evaluated.

No description available.

The aim of this study is to demonstrate the possibility of production of nanocables as an alternative to the other one dimensional metal/polymer composite structures like nanowires and nanorods. There is no certain definition of nanocables / however they could be considered as assemblies of nanowires. Nanocable structure can be defined as a core-shell structure formed by a polymeric shell and a metal core that runs continuously within this shell. To produce nanocables, two main steps were carried out. Firstly, monodispersed silver metal nanoparticles to be aligned within the cable core were produced. Investigations on reduction reactions in the presence of strong and weak reducing agents and different capping agents revealed the importance of the kinetics of reduction in the production of monodispersed nanoparticles. Use of capping agents to give a positive reduction potential, resulted in the slow reduction rates that was critical for fine tuning of the final particle sizes between 1-10 nm. Hydrazine hydrate and oleylamine/ oleic acid systems were used as strong and weak reducing agents, respectively. By using weak reducing agent, monodisperse spherical silver nanoparticles with the diameter of 2.7 nm were produced. It was shown that particles with controlled diameter and size distribution can be obtained by tuning the system parameters. Secondly, particles produced as such were electrospun within the core of the polymer nanofibers and long continuous nanocables were produced. Polyvinyl pyrrolidone and polycaprolactone were used in shell part of nanocables. Transmission electron microscopy (TEM), scanning electron microscopy (SEM), photon correlation spectroscopy (PCS), X-ray diffraction (XRD) and surface plasmon resonance spectroscopy (SPR) analyses were carried out in order to understand the mechanism by which the nanoparticles were reduced and for further characterization of the product.

This thesis consists of two parts and nine chapters. The first part (Part I) presents theoretical studies on non-radiative mode of excitation energy transfer (EET) in donor-acceptor (D-A) systems involving metal nanoparticles. Part I contains four chapters and describes EET in following different D-A systems: (i) dye and a spherical metal nanoparticle of different sizes, (ii) two spherical metal nanoparticles, and (iii) two prolate shaped metal nanoparticles at different relative orientations. Part II provides a detailed study on the origin of photochemical funneling of excitation energy in conjugated polymers like poly-[phenylenevinylene] (PPV) and consists of three chapters. The ninth chapter provides a concluding note. The thesis begins with a basic introduction on Forster resonance energy transfer(FRET), presented in chapter 1. This chapter provides a detail derivation of Forster’s rate expression for a non-radiative process of EET from a donor to an acceptor molecule and discusses the limitations of Forster theory. The chapter highlights the huge success of FRET technique in understanding biological processes assisted by changes in conformations of biopolymers under conditions where Frster theory is valid. The chapter also discusses practical limitations of FRET technique such as use of pre-averaged value of orientation factor and photobleaching of dye molecules. Part I starts with chapter 2 which explains the advantages of using metal nanoparticles over dye molecules in D-A systems. The chapter discusses recent experimental re-ports of excitation energy transfer to nanoparticles, now commonly referred to as nanoparticle surface energy transfer (NSET). Theories describing the process of EET from a dye molecule (dye molecule is assumed to be a point dipole) to a planar metallic surface are discussed. In the case of energy transfer from a donor dye molecule to a planar metallic surface, the distance dependence of the rate of EET is found to vary as 1/d4 where dis a distance from the center of a dye molecule to the metallic surface. This is unlike conven-tional FRET where rate of EET follows 1/R6 distance dependence with R as a distance between the centers of D and A. Also, a recent experimental study by Yun et al [J. Am. Chem. Soc. 127, 3115 (2005)] on energy transfer from a dye molecule to a spherical gold nanoparticle reports that the rate of EET follows 1/d4 distance dependence. The remaining chapters of this part focus on understanding this deviation from the Forster theory in different D-A systems. Chapter 3 describes quantized electro-hydrodynamic approach used to model the plasmonic excitations in metal nanoparticles. The optical absorption frequencies of nanoparticles computed here are subsequently used in chapters 4 and 5 for the calculation of the rate of EET. The chapter discusses the merits and de-merits of electro-hydrodynamic approach in comparison to other available techniques. The electro-hydrodynamic method of calculating the absorption frequencies provide a physically appealing, mathematically simple and numerically tractable approach to the problem and is also at the same time, semi-quantitatively reliable. The optical frequencies obtained as a function of size and aspect ratio of metal nanoparticles are found to be in good agreement with physical predictions. Chapter 4 studies the distance dependence of rate of EET for a D-A system similar to one studied by Yun et al [J. Am. Chem. Soc. 127, 3115 (2005)]. The chapter contains the relevant derivations of the quantities required for computing the interaction matrix elements. The dependence of the rate of EET on R is found surprisingly to be in agreement with Forster theory even at intermediate distances compared to the size of spherical nanoparticles (a). However, the dependence of rate of EET on d is found to vary as 1/dσwith σ=3 - 4 at intermediate distances which is in good agreement with the experimental results of Yun et al. At large values of d, the distance dependence of rate is found to vary as 1/d6 . The chapter discusses the physical basis behind these results. The theory predicts a non-trivial dependence of rate on the size of a nanoparticle which ultimately attains the asymptotic a3 size dependence. The rate of EET is also studied for different orientations of dye molecule. Chapter 5 studies surface plasmon mediated EET between two metal nanoparticles. The rate of EET between two prolate and spherical shaped silver nanoparticles is studied as a function of Rand d. d, in present chapter denotes surface-to-surface separation distance between two nanoparticles. In case of EET between two non-spherical nanoparticles, even at separations larger than the size of the nanoparticle, a significant deviation from 1/R6 dependence is obtained. However, 1/R6 distance dependence of EET rate is found to be robust for spherical nanoparticles over an entire range of separations. The deviation of rate from 1/R6 distance dependence becomes more pronounced with in-crease in the aspect ratio of the nanoparticle. The relative orientation of the nanoparticles is found to markedly influence the R-dependence of EET rate. Interestingly, the relative orientation of nanoparticles effect the d-distance dependence of the rate to a lesser extend in comparison to the R-dependence of the rate. Therefore, we predict that for non-spherical nanoparticles studying EET rate as a function of will provide more conclusive results. The chapter also discusses the size dependence of rate of EET for this particular D-A system. In Part II, excitation energy transfer (EET) in a conjugated polymer is studied. To start with, chapter 6 provides a brief introduction to photophysics of conjugated polymers. The chapter discusses the nature of photoexcitations in these systems and stresses on the influence of polymer’s morphology on the optical properties of conjugated polymers. Chapter 7 describes the theory used for modeling conjugated polymer chain. A polymer chain consists of number of spectroscopic units (chromophores) of varying lengths. The average length of chromophores in conjugated polymer depends on defect concentration. In the present study we treat an excitation generated on each chromophore within “particle-in-a-box” formalism but one that takes into account the electron-hole interactions. The transition dipole moments and the radiative rates are computed for different lengths of chromophores with parameters appropriate for PPV chain. These quantities are used in chapter 8 for calculating the absorption and emission spectra of conjugated polymer chains at different defect concentrations. The main aim of Chapter 8 is to understand the origin of photochemical funneling of excitation energy in conjugated polymers. PPV chain is modeled as a polymer with the length distribution of chromophores given either by a Gaussian or by a Poissonian distribution. We observe that the Poissonian distribution of length segments explains the optical spectra of PPV rather well than the Gaussian distribution. The Pauli’s master equation is employed to describe the excitation energy transfer among different chromophores. The rate of energy transfer is assumed to be given here, as a first approximation, by the well-known Forster expression. The observed excitation population dynamics confirm the photochemical funneling of excitation energy from shorter to longer chromophores of the polymer chain. The calculations show that even in steady state more than one type of chromophore contribute towards the emission spectrum. The observed difference between the calculated emission spectra at equilibrium and in steady state indicates the existence of local domains in a polymer chain within which the non-radiative excitation energy transfer from shorter to longer chromophores take place. These results are found to be in agreement with recent experimental reports. The concluding chapter 9 gives a brief summary of the outcome of the thesis and ends up with suggestion of a few future problems which in current scenario are of great interest.

Im Folgenden werden Transferprozesse in Nanohybridsystemen theoretisch untersucht. Diese Hybridsysteme sind vielversprechende Kandidaten für neue optoelektronische Anwendungen und erfahren daher ein erhebliches Forschungsinteresse. Jedoch beschränken sich Arbeiten darüber hauptsächlich auf experimentelle Untersuchungen und kaum auf die dazugehörige theoretische Beschreibung. Bei den theoretischen Betrachtungen treten entscheidende Limitierungen auf. Es werden entweder Details auf der atomaren Ebene vernachlässigt oder Systemgrößen betrachtet, die wesentlich kleiner als im Experiment sind. Diese Thesis zeigt, wie die bestehenden Theorien verbessert werden können und erweitert die bisherigen Untersuchungen durch die Betrachtung von vier neuen hoch relevanten Nanohybridsystemen. Das erste System ist eine Nanostruktur, die aus einem Au-Kern und einer CdS-Schale besteht. Beim zweiten System wurde eine ZnO/Para-Sexiphenyl Nanogrenzfläche untersucht. Die zwei anderen Systeme beinhalten jeweils einen CdSe-Nanokristall, der entweder mit einem Pheophorbide-a-Molekül oder mit einem röhrenförmigen Farbstoffaggregat wechselwirkt. In allen Systemen ist der Anregungsenergie-Transfer ein entscheidender Transfermechanismus und steht im Fokus dieser Arbeit. Die betrachteten Hybridsysteme bestehen aus zehntausenden Atomen und machen daher eine individuelle Berechnung der einzelnen Subsysteme sowie deren gegenseitiger Wechselwirkung notwendig. Die Halbleiter-Nanostrukturen werden mit der Tight-Binding-Methode und der Methode der Konfigurationswechselwirkung beschrieben. Für das molekulare System wird die Dichtefunktionaltheorie verwendet. Die dazugehörigen Rechnungen wurden von T. Plehn ausgeführt. Das metallische Nanoteilchen wird durch quantisierte Plasmon-Moden beschrieben. Die verwendeten Theorien ermöglichen eine Berechnung von Anregungsenergietransfer in Nanohybridsystemen von bisher nicht gekannter Systemgröße und Detailgrad. / In the following, transfer phenomena in nanohybrid systems are investigated theoretically. Such hybrid systems are promising candidates for novel optoelectronic devices and have attracted considerable interest. Despite a vast amount of experimental studies, only a small number of theoretical investigations exist so far. Furthermore, most of the theoretical work shows substantial limitations by either neglecting the atomistic details of the structure or drastically reducing the system size far below the typical device extension. The present thesis shows how existing theories can be improved. This thesis also expands previous theoretical investigations by developing models for four new and highly relevant nanohybrid systems. The first system is a spherical nanostructure consisting of an Au core and a CdS shell. By contrast, the second system resembles a finite nanointerface built up by a ZnO nanocrystal and a para-sexiphenyl aggregate. For the last two systems, a CdSe nanocrystal couples either to a pheophorbide-a molecule or to a tubular dye aggregate. In all of these systems, excitation energy transfer is an essential transfer mechanism and is, therefore, in the focus of this work. The considered hybrid systems consist of tens of thousands of atoms and, consequently, require an individual modeling of the constituents and their mutual coupling. For each material class, suitable methods are applied. The modeling of semiconductor nanocrystals is done by the tight-binding method, combined with a configuration interaction scheme. For the simulation of the molecular systems, the density functional theory is applied. T. Plehn performed the corresponding calculations. For the metal nanoparticle, a model based on quantized plasmon modes is utilized. As a consequence of these theories, excitation energy transfer calculations in hybrid systems are possible with unprecedented system size and complexity.