161 |
Electro-Optic Hybrid Rotary Joint (EOHRJ)Xu, Guoda, Bartha, John, Zhang, Sean, Qiu, Wei, Lin, Freddie, McNamee, Stuart, Rheaume, Larry 10 1900 (has links)
International Telemetering Conference Proceedings / October 23-26, 2000 / Town & Country Hotel and Conference Center, San Diego, California / An advanced electro-optic hybrid rotary joint (EOHRJ) has been developed in Phase II of an AF SBIR effort with Physical
Optics Corporation (POC) to replace cable wrap structure for multi-channel rotation-to-fixed (RTF) signal transmission. The
EOHRJ meets AFFTC and other range special needs with a generic, high performance, rotary joint solution. At the moment,
we have successfully installed and tested the EOHRJ on our KTM tracker system with the following capabilities: 1) able to
accommodate hundreds of transmission channels, including electrical power, control, feedback, and low-speed signals; 2)
able to accommodate multiple channel, high data rate (over gigabits per second), and bi-directional signal transmission; 3)
able to be reliable for harsh environmental operation, adaptive to stringent sized requirement, and accommodating existing
electrical and mechanical interfaces.
The completed EOHRJ contains three uniquely integrated functional rings. The first and the outmost one is power ring,
which provides RTF transmission channels for over 50 high voltage and high current channels. The second and the middle
one is low speed electrical signal ring, which provides RTF transmission for over hundred control, feedback, and low speed
data signals. The third and the inmost one is optical fiber slip ring, which, incorporating with current advanced signal
multiplexing technologies (either time division or wavelength division multiplexing ) is able to provide multiple channel,
high data rate, and bi-directional signal transmission. At the moment, the prototype module of the tree-layer EOHRJ has
been successfully assembled in Air Force’s tracker system, and is providing a satisfactory performance. This paper presents
our joint work on this project.
|
162 |
Bi-directional Dense Wavelength Division Multiplexed Systems for Broadband Access NetworksAkanbi, Oladeji Bamidele 20 November 2006 (has links)
Dense wavelength division multiplexing (DWDM) is becoming the technology of choice for meeting the increasing bandwidth demands in optical networks. DWDM has been used to increase the capacity of long-haul optical transport systems. Efforts are being made to move DWDM into the broadband access network serving residential and business subscribers.
First, a new centralized DWDM PON scheme is demonstrated for bi-directional upstream and downstream transmissions. The proposed DWDM PON scheme is implemented using optical carrier suppression and separation (OCSS) technology to generate a wavelength pair from a single laser source at the central office. This method enables the co-location of both upstream and downstream DWDM transmitters in the central office. In addition, the complexity, cost, and maintenance of the optical network unit are reduced by enabling wavelength independent operation.
Second, a new multistage architecture is proposed for the delivery of information to groups of subscribers located at different distances from the central office. A 25 GHz DWDM comb is generated using OCSS technology, and error-free transmission of four 10 Gbps channels is demonstrated.
Finally, a new wide area access network with bi-directional DWDM amplification using semiconductor optical amplifiers (SOAs) is demonstrated. The detrimental effect of SOA
crosstalk resulting from cross gain modulation can be suppressed using a constant intensity
modulation format such as differential phase shift keying (DPSK). The feasibiity of
bi-directional DPSK transmission of 16
interleaved DWDM channels using an in-line SOA has been studied experimentally. In addition, the reduction of bi-directional SOA reflections has been realized by optimizing the SOA bias current and facet reflectivities.
|
163 |
Statistical Multiplexing of Video for Fixed Bandwidth Distribution : A multi-codec implementation and evaluation using a high-level media processing libraryHalldén, Max January 2018 (has links)
When distributing multiple TV programs on a fixed bandwidth channel, the bit rate of each video stream is often constant. Since video sent at a constant quality is typically wildly varying, this is a very unoptimal solution. By instead sharing the total bit rate among all programs, the video quality can be increased by allocating bit rate where it is needed. This thesis explores the statistical multiplexing problem for a specific hardware platform with the limitations and advantages of that platform. A solution for statistical multiplexing is proposed and evaluated using the major codecs used for TV distribution today. The main advantage of the statistical multiplexer is a lot more even quality and a higher minimum quality achieved across all streams. While the solution will need a faster method for bit rate approximation for a more practical solution in terms of performance, the solution is shown to work as intended.
|
164 |
Eigenmode multiplexing with SLM for volume holographic data storageTakashima, Yuzuru, Chen, Guanghao, Miller, Bo E. 23 August 2017 (has links)
The cavity supports the orthogonal reference beam families as its eigenmodes while enhancing the reference beam power. Such orthogonal eigenmodes are used as additional degree of freedom to multiplex data pages, consequently increase storage densities for volume Holographic Data Storage Systems (HDSS) when the maximum number of multiplexed data page is limited by geometrical factor. Image bearing holograms are multiplexed by orthogonal phase code multiplexing via Hermite- Gaussian eigenmodes in a Fe: LiNbO3 medium with a 532 nm laser at multiple Bragg angles by using Liquid Crystal on Silicon (LCOS) spatial light modulators (SLMs) in reference arms. Total of nine holograms are recorded with three angular and three eigenmode.
|
165 |
Study, analysis and application of optical OFDM, Single Carrier (SC) and MIMO in Intensity Modulation Direct Detection (IM/DD)Mmbaga, Paul Fahamuel January 2015 (has links)
With the rapid growth of wireless data demands and saturation of radio frequency (RF) capacity, visible light communication (VLC) has become a promising candidate to complement conventional RF communication, especially for indoor short range applications. However the performance of the system depends on the propagation and type of system used. An optical Orthogonal Frequency Division Multiplexing (O-OFDM) together with multiple input multiple output (MIMO) in different scenario and modulation techniques are studied in the thesis. A novel optical wireless communication (OWC) multi-cell system with narrow field of view (FOV) is studied. In this system the intensity modulated beam from four light sources are used for communication. The system allows beams to be concentrated in specific areas of the room to serve multiple mobile devices with low interference and hence increase system capacity. The performance of asymmetrically clipped optical orthogonal frequency division multiplexing (ACO-OFDM), direct current biased optical OFDM (DCO-OFDM) and single carrier (SC) modulation are then compared in this system considering single user and multiusers scenarios. The performance of the multi-cell is compared with single cell with wide FOV. It is shown that the capacity for multi-cell system increases with the number of users to 4 times the single user capacity. Also the findings show that multi-cell system with narrow beams can outperform a single wide beam system in terms of coverage area and hence average throughput of about 2.7 times the single wide beam system capacity. One of the impairments in line of sight (LOS) OWC systems is coverage which degrades the performance. A mobile receiver with angular diversity detectors in MIMO channels is studied. The objective is to improve the rank of the channel matrix and hence system throughput. Repetition coding (RC), spatial multiplexing (SMP) and spatial modulation (SM) concepts are used to evaluate throughput across multiple locations in a small room scenario. A novel adaptive spatial modulation (ASM) which is capable of combating channel rank deficiency is devised. Since the receiver is mobile, the channel gains are low in some locations of the room due to the lack of LOS paths between transmitters and receivers. To combat the situation adaptive modulation and per antenna rate control (PARC) is employed to maximise spectral efficiency. The throughputs for fixed transmitters and receivers are compared with the oriented/inclined detectors for different cases. Angular diversity detectors offer a better throughput improvement than the state of the art vertical detectors, for example in ASM angular diversity receiver gives throughput of about 1.6 times that of vertical detectors. Also in SMP the angular detectors offer throughput about 1.4 times that of vertical detectors. SMP gives the best performance compared to RC, SM and ASM, for example SMP gives throughput about 2.5 times that of RC in both vertical detectors and angular diversity receivers. Again SMP gives throughput about 6 times that of SM in both vertical detectors and angular diversity receivers. Also SMP provides throughput about 2 times that of ASM in both vertical detectors and angular diversity receivers. ASM exhibit improvement in throughput about average factor of 3.5 times SM performance in both vertical detectors and angular diversity detectors. As the performance of the system may be jeopardized by obstructions, specular and diffuse reflection models for indoor OWC systems using a mobile receiver with angular diversity detectors in MIMO channels are considered. The target is to improve the MIMO throughput compared to vertically oriented detectors by exploiting reflections from different reflecting surfaces in the room. The throughput across multiple locations in the small room by using RC, SMP and SM approaches is again evaluated. The results for LOS only channels against LOS with specular or diffuse reflection conditions, for both vertical and angular oriented receivers are then compared. The results show that exploiting specular and diffuse reflections provide significant improvements in link performance. For example the reflection coefficient (α) of 0.9 and the antenna separation of 0.6 m, RC diffuse model shows throughput improvement of about 1.8 times that of LOS for both vertical detectors and angular diversity receivers. SM diffuse model shows throughput improvement of about 3 times that of LOS for both vertical detectors and angular diversity receivers. ASM diffuse model shows throughput improvement of about 2 times that of LOS for both vertical detectors and angular diversity receivers. SMP diffuse model shows throughput improvement of about 1.5 times that of LOS for both vertical detectors and angular diversity receiver.
|
166 |
Optimal Scheduling For Balancing Queue LengthsChakraborty, Avijit 02 1900 (has links) (PDF)
No description available.
|
167 |
Spectral Shape Division Multiplexing (SSDM): Apparatus, Transmitter, Receiver and DetectionHolguín-Sánchez, Fausto Daniel 01 June 2012 (has links)
Wireless communication companies require to use the frequency spectrum to operate. Both frequency licenses and infrastructure to reuse frequencies are costly resources subject to increasing demand. This work introduces a novel multiplexing method that saves spectrum called Spectral Shape Division Multiplexing (SSDM). Under certain configurations, SSDM displays higher flexibility and throughput than other spectrally efficient methods.
SSDM defines the structure of a wireless multi-carrier by software. It is similar to Orthogonal Frequency Division Multiplexing (OFDM) in that both use overlapped sub-carriers to make efficient use of allocated spectrum. However, SSDM has several advantages. Where OFDM organizes sub-carriers orthogonally, SSDM allows arbitrary frequency steps enabling higher spectral efficiency. Similarly, while OFDM and other spectrally efficient methods use sinusoidal pulse forms, SSDM can use non-standard pulses providing a greater control of the carrier. In this thesis, a SSDM transceiver is implemented to reduce the spectrum utilization. SSDM presents an increase in spectral efficiency of 20% average with respect to OFDM. The cost of this gain is higher computational speed and signal to noise ratio.
The mathematical models and possible architecture for an SSDM system with sinusoidal pulses is developed. The modem is compared with other spectrally efficient methods. Similarly, the trade-offs between spectral efficiency, bit-error rates, dimension of the carrier and sub-carrier spacing are subject of analysis.
|
168 |
THE RESEARCH ON THE HSP50214 PDC CHIP APPLYING TO FDM TELEMETRY SYSTEMPeng, Song, XiaoLin, Zhang, Wei, Zhang 10 1900 (has links)
International Telemetering Conference Proceedings / October 18-21, 2004 / Town & Country Resort, San Diego, California / The content of this paper is putting forward an idea that applies the software radio technique to the subcarrier demodulation of frequency divided multiplexing telemetry system. Firstly, the article explains the basic thought and application of the software radio. It introduces the main function and the use of the programmable downconverter in HSP50214/ HSP50216. Secondly, it discusses the merit and shortcoming about the method of the subcarrier demodulation of frequency divided multiplexing telemetry system in common use. Finally, the article aims at ± 7.5% proportion bandwidth FM subcarrier channels that in common use in the military standard, introducing HSP50214/HSP50216 programmable downconverter in achievement of design and simulation result. The main problems in the design are discussed and a conclusion obtained.
|
169 |
Evolving Range and DISA Networks Using Pseudo WireMerritt, Joseph 10 1900 (has links)
ITC/USA 2007 Conference Proceedings / The Forty-Third Annual International Telemetering Conference and Technical Exhibition / October 22-25, 2007 / Riviera Hotel & Convention Center, Las Vegas, Nevada / The Eastern and Western Ranges along with DISA share a similar vision around Net-Centricity
such that "Anyone, anywhere can get to any data source and exploit the information they are
authorized to access." Their legacy infrastructure is built around TDM and ATM transport
networks, which are link based and connection oriented. To achieve the vision the infrastructure
must evolve towards a packet switched network (PSN) that is meshed based. Consequently, a
means to interwork non-IP enabled services is required. Pseudo Wire protocol encapsulation
provides the means for extending telemetry, data, voice, and video services in native formats
over Ethernet, IP, and MPLS networks in a reliable way that delivers greater operational
efficiency and a smooth migration to a single converged network.
|
170 |
Digital FDM for the HSTSS DAC ProgramDoerr, Michael B., Hallidy, William H., Jr.,, McMillian, Gary B., Burke, Lawrence W., Jr., Faust, Jonah N. 10 1900 (has links)
International Telemetering Conference Proceedings / October 25-28, 1999 / Riviera Hotel and Convention Center, Las Vegas, Nevada / This paper presents the design of an innovative approach to Frequency Division Multiplexing (FDM) for the STRICOM Hardened Subminiature Telemetry and Sensor System (HSTSS) Data Acquisition Chipset (DAC) program. An ASIC (Application Specific Integrated Circuit) is being developed by Systems & Processes Engineering Corporation (SPEC) that implements this new digital FDM approach for telemetry applications. The FDM ASIC provides six channels that are IRIG-106 compatible, and may be used in conjunction with a Delay/Repeater ASIC. Together these ASICs make a complete instrumentation system for those applications requiring very small size, simplicity of use, and low cost, e.g. munitions/armament testing.
|
Page generated in 0.0511 seconds